Texas Instruments

ADS574KP-2 - 12-Bit 40 kSPS SAR ADC | Texas Instruments

MPN: ADS574KP-2 ✓ सक्रिय
4.5 V to 5.5 V Vdss 28-pin PDIP Package
न्यूनतम ऑर्डर मात्रा: 1 |

ADS574KP-2 अवलोकन

The Texas Instruments ADS574KP-2 is a 12-bit, single-input successive-approximation analog-to-digital converter with a maximum sampling rate of 40 kSPS, housed in a 28-pin PDIP package. It operates from a single +5 V supply, includes internal sampling, and provides a microprocessor-compatible interface for parallel data acquisition. Its 25 µs maximum acquisition and conversion time supports designs that require deterministic sampling without an external sample-and-hold stage.

An ADC is a data-acquisition IC that converts an analog voltage into a digital code for processing by a microcontroller, microprocessor, DSP, or industrial controller. The ADS574 belongs to the parallel-output ADC family, with the SAR architecture performing conversion through a capacitor-based DAC and successive comparison. Within the broader hierarchy, it is an ADC and data converter within the mixed-signal and analog IC categories, while its internal reference, clocking, sampling, and digital interface reduce the number of external components required.

The principal features are 12-bit resolution, one analog input, a 40 kSPS conversion rate, and operation from a 4.5 V to 5.5 V supply. Internal sampling eliminates the external sample-and-hold circuitry needed in many earlier ADC574 designs. The microprocessor-compatible interface simplifies connection to parallel bus systems, while low-power CMOS construction supports compact industrial and instrumentation designs. The device is also described as a drop-in replacement for ADC574 models in most applications.

The ADS574 uses a successive-approximation conversion architecture implemented with a capacitor array, or CDAC. At each conversion, the internal conversion network compares the sampled input against successive internally generated reference levels. The resulting 12-bit code is transferred through the parallel output interface after the conversion status indicates that the result is ready. A single +5 V supply supports the core converter and associated interface functions, while the 25 µs maximum acquisition-and-conversion specification defines the timing budget available for sampling a new input.

Typical applications include industrial process monitoring, laboratory instrumentation, digital voltmeter and panel-meter designs, embedded control systems, and legacy ADC574-compatible data-acquisition equipment. It is especially useful where a parallel microprocessor interface and deterministic sampling interval are more important than compactness or ultrahigh conversion speed. Engineers should also account for the older parallel architecture when designing around modern serial-interface ADCs, because wiring count, bus timing, and software handling differ substantially.

For PCB implementation, route the analog input and reference-related signals away from digital clock and output traces, provide the decoupling and bypass capacitance specified by the manufacturer datasheet, and treat the parallel output bus as a high-speed digital interface. Confirm that the host processor supports the required logic levels and conversion-control handshake. The 28-pin PDIP package is also less compact than modern leadless packages, which should be considered for space-constrained new designs.

This product page combines the manufacturer specifications with practical selection guidance, interface considerations, verified drop-in candidates, and design notes for engineers evaluating the ADS574KP-2 in ADC574-compatible industrial, instrumentation, and embedded-control systems.

के लिए ड्रॉप-इन विकल्प ADS574KP-2 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADS574KP-2 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Maximum Acquisition and Conversion Time, Package, Internal Clock, Internal Reference.

Texas Instruments
Maximum Acquisition and Conversion Time: 25 µs
Internal Clock: Yes
Internal Reference: Yes
इसके साथ तुलना करें ADS574KP-2 →
Texas Instruments
Package: 28-PDIP
Internal Clock: Included
Internal Reference: Included
इसके साथ तुलना करें ADS574KP-2 →

ADS574KP

✅ ड्रॉप-इन
Texas Instruments
📦 28-pin PDIP
12 bit · Successive-approximation ADC · SAR ADC · 1 input · 25 us · +5 V · Low-power CMOS · 28-PDIP

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS574KE

✅ ड्रॉप-इन
Texas Instruments
📦 28-pin PDIP
12 bit · 1 analog input · Successive approximation (SAR) · 40 kSPS · 25 µs · +5 V · Yes · Yes

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADC574

✅ ड्रॉप-इन
📦 28-pin PDIP
Legacy ADC574 function is identified by the manufacturer datasheet as a drop-in replacement target; ADS574KP-2 adds internal sampling and lower power consumption while retaining the 28-pin PDIP interface.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS574KP-2 Maximum Ratings और Electrical Characteristics

रेज़ोल्यूशन 12 bit
Analog Input Count 1 input
Conversion Architecture Successive approximation (SAR)
Maximum Sampling Rate 40 kSPS
Maximum Acquisition and Conversion Time 25 us
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
पैकेज 28-pin PDIP
माउंटिंग प्रकार Through-hole
Output Interface Parallel microprocessor-compatible interface
Sampling Internal sample-and-hold
Internal DAC Implementation Capacitor array (CDAC)
Process Technology Low-power CMOS
Legacy Compatibility Drop-in replacement for ADC574 models in most applications
Performance Guarantee Guaranteed AC and DC performance
RoHS स्थिति Compliant

ADS574KP-2 28-pin pdip पिन कॉन्फ़िगरेशन गाइड

ADS574KP-2 (28-pin pdip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

ADS574KP-2 के लिए 28-pin pdip पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADS574KP-2.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADS574KP-2 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Process Monitoring, Digital Panel Meters, Laboratory Instrumentation, Embedded Control Systems, Legacy ADC574 Equipment, Data Acquisition and Control.

🏭

Industrial Process Monitoring

The ADS574KP-2 fits industrial process-monitoring designs that require a deterministic parallel ADC input and a 12-bit result rather than a high-channel-count converter. Its 40 kSPS maximum sampling rate and 25 µs maximum acquisition-and-conversion time define the minimum interval between new samples. The internal sampling function simplifies the analog front end, while the parallel bus connects readily to older PLC, controller, or embedded-control architectures. Designers should preserve the manufacturer’s input, reference, bypass, and grounding layout and verify that the -2 operating grade covers the enclosure temperature.

📺

Digital Panel Meters

The ADS574KP-2 is suitable for digital panel-meter and digital voltmeter designs where a microprocessor directly reads a parallel 12-bit conversion result. The single analog input can monitor one scaled sensor signal, and the 40 kSPS maximum rate permits responsive meter updates. Its single +5 V supply operation can simplify system partitioning when the panel already uses 5 V logic. The main design constraint is the parallel data interface: the host processor must allocate 12 data pins plus conversion-control and status pins, and the PCB must keep analog routing separated from digital bus transitions.

🧩

Laboratory Instrumentation

The ADS574KP-2 can serve as the acquisition ADC in laboratory instruments that sample a conditioned analog measurement at a controlled rate. A 12-bit resolution provides 4096 digital codes, while the 40 kSPS maximum rate supports moderately sampled measurements such as temperature, pressure, or slowly varying process signals. The internal sampling circuit removes the external sample-and-hold stage often required with ADC574-class components. For low-level instrumentation, engineers should pay particular attention to input conditioning, grounding, reference stability, and the acquisition timing specified by the manufacturer datasheet.

⚡

Embedded Control Systems

The ADS574KP-2 is appropriate for embedded control and legacy data-acquisition systems built around a microprocessor with a parallel bus. The device combines a 12-bit SAR converter, internal sampling, clocking, and microprocessor interface in one 28-pin PDIP package. This integration reduces the external sample-and-hold requirement and supports a direct processor read sequence. The implementation trade-off is bus wiring: unlike a serial-interface ADC, the converter requires 12 output lines and dedicated control connections, so processor pin availability should be checked before schematic capture.

🔧

Legacy ADC574 Equipment

The ADS574KP-2 is particularly relevant to equipment built around the ADC574 class of parallel converters. The manufacturer datasheet identifies ADS574 as a drop-in replacement for ADC574 models in most applications, with internal sampling, lower power consumption, and single +5 V operation. This enables targeted modernization where mechanical compatibility and the processor bus must be preserved. Engineers should still compare input ranges, interface timing, logic levels, reference implementation, and acquisition behavior of the installed ADC574 against the ADS574KP-2 datasheet before making a drop-in production change.

🌐

Data Acquisition and Control

The ADS574KP-2 fits compact data-acquisition and supervisory-control subsystems that need one conditioned analog measurement channel and a processor-readable digital result. A 40 kSPS maximum conversion rate supports repeated measurements, while the 25 µs maximum acquisition-and-conversion interval provides a predictable conversion window. The 28-pin PDIP package is practical for through-hole industrial boards and can facilitate repair or replacement in legacy systems. Keep the analog trace short, provide the specified supply bypass, and observe the manufacturer’s guidance for the parallel output lines to prevent switching noise from corrupting the measured input.

What is the ADS574KP-2?
The ADS574KP-2 is a 12-bit, single-input successive-approximation ADC from Texas Instruments with a maximum sampling rate of 40 kSPS and a 28-pin PDIP package. According to the manufacturer datasheet, it combines internal sampling, a complete parallel microprocessor interface, and operation from a single +5 V supply. It is intended for industrial measurement, instrumentation, embedded control, and systems migrating from ADC574-family converters.
What is the conversion rate of ADS574KP-2?
The ADS574KP-2 supports a maximum sampling rate of 40 kSPS. The manufacturer datasheet specifies a maximum acquisition-and-conversion time of 25 µs, allowing a new conversion to be initiated within that interval when the interface timing requirements are met. This rate is appropriate for process measurement, panel meters, laboratory instruments, and other moderate-speed acquisition systems rather than high-definition video or waveform sampling.
What supply voltage does ADS574KP-2 use?
The ADS574KP-2 operates from a single +5 V supply within a 4.5 V to 5.5 V supply range. According to the manufacturer datasheet, this single-supply architecture supports the converter, internal sampling function, reference, clocking, and microprocessor-compatible interface. Place the recommended bypass capacitance at the supply pins and preserve clean return paths to reduce digital coupling into the analog input.
Where can I download the ADS574KP-2 datasheet PDF?
The ADS574KP-2 datasheet PDF can be obtained from the product document linked on this page. The document describes the 12-bit SAR architecture, internal sampling, 40 kSPS maximum sampling rate, 25 µs maximum acquisition-and-conversion time, single +5 V operation, pin configuration, and electrical characteristics. Use the package pin table and application circuit in that document when assigning PCB connections.
Where can I find the ADS574KP-2 pinout?
The ADS574KP-2 pinout is found in the manufacturer datasheet under the pin-configuration and application-information sections for the 28-pin PDIP package. Use the numbered package drawing to map analog input, supply, ground, control, and parallel data signals. Because a complete manufacturer pin-name table was not reproduced on this page, assign the PCB nets directly from the datasheet rather than inferring pin functions from another package variant.
Can ADS574KP-2 replace ADC574 designs?
Yes, the ADS574KP-2 can replace ADC574 designs in most applications. According to the manufacturer datasheet, it is a drop-in replacement for ADC574 models while adding internal sampling, lower power consumption, and single +5 V operation. Confirm power-supply polarity, logic levels, control timing, pin availability, and acquisition timing against the original ADC574 implementation before approving a production substitution.
What can replace the ADS574KP-2?
The closest documented replacement is the ADS574KP from the same ADS574 family because both use the 28-pin PDIP format and provide 12-bit SAR conversion with a parallel microprocessor interface. ADS574KE is another family member identified by the cross-reference listing, but its temperature grade and exact electrical limits must be checked before substitution. The ADS574KP-2 may also be sourced as an Rochester Electronics-branded stocked version of the Texas Instruments device.
Is ADS574KP-2 the same as ADS574KP?
The ADS574KP-2 is a suffix-qualified orderable version of the ADS574KP family, not a different converter architecture. Both are 12-bit, single-input SAR ADCs in a 28-pin PDIP package with a 40 kSPS maximum sampling rate. The -2 designation identifies a specific ordering or temperature grade, so verify that grade against the ADS574KP datasheet and the operating-temperature requirements of the target equipment.
ADS574KP-2 vs ADS574KP: which is better for industrial instrumentation?
ADS574KP-2 is preferable when its -2 ordering or temperature grade matches the industrial equipment specification; otherwise ADS574KP may be the more appropriate catalog option. Both provide 12-bit resolution, one analog input, SAR conversion, 40 kSPS operation, internal sampling, and a 28-pin PDIP package. The decisive comparison is the qualified temperature range, qualification status, availability, and required operating grade rather than conversion performance.
When should I choose ADS574KP-2 over ADS574KP?
Choose ADS574KP-2 when the -2 device designation, qualified operating grade, and manufacturer ordering code exactly satisfy the project requirements. Choose ADS574KP when its documented grade is a better match for the ambient-temperature range or qualification policy. Both devices share the same 28-pin footprint and 12-bit, 40 kSPS parallel SAR architecture, making electrical timing and PCB compatibility straightforward to carry across.
Is ADS574KP-2 suitable for process-control measurements?
Yes, ADS574KP-2 is suitable for moderate-speed process measurement when the required signal bandwidth is consistent with a 40 kSPS maximum sampling rate. Its 12-bit resolution, internal sample-and-hold function, 25 µs maximum conversion time, and microprocessor-compatible output support deterministic acquisition. The analog front end must still provide suitable input range, bandwidth, anti-alias filtering, grounding, and protection for the measured process signal.
What is the best ADC574 equivalent for ADS574KP-2?
The ADS574KP is the best supported family-based equivalent for the ADS574KP-2 because the manufacturer describes the ADS574 as a drop-in replacement for ADC574 models in most applications. ADS574KE is a related family candidate, but its exact temperature and electrical ratings require confirmation. Before selecting any legacy ADC574 alternative, compare supply voltage, logic levels, control signals, conversion timing, and all 28 package connections.
How much power and heat does ADS574KP-2 dissipate?
The ADS574KP-2 uses a low-power CMOS implementation, but its exact supply current and internal power dissipation depend on the operating mode, conversion rate, logic state, and supply voltage. Use the supply-current and power-dissipation graphs in the manufacturer datasheet for the selected clocking and sampling conditions. Estimated: P = VIN × ICC, using the measured operating current for the actual system state, then verify junction temperature against the package limits.
Where can I buy ADS574KP-2 and check stock?
Use the Request a Quote form on this page to request ADS574KP-2 availability, current lead time, and a quotation for the required quantity. The form is the appropriate channel for current transactional information because inventory, price, and lead time can change independently of the device's technical specifications. Confirm the exact -2 ordering grade, operating-temperature limits, lifecycle status, package drawing, and absolute maximum ratings in the manufacturer datasheet before releasing production hardware.
What should designers check before using ADS574KP-2 in a new PCB?
Verify the 4.5 V to 5.5 V supply requirement, 12-bit output width, 40 kSPS maximum sampling rate, 25 µs maximum acquisition-and-conversion time, and the 28-pin PDIP footprint against the host processor. The parallel interface requires enough data pins for the 12-bit result plus control and status signals. Follow the manufacturer reference and decoupling recommendations rather than relying on generic ADC layout practice.
How does ADS574KP-2 compare with modern serial-interface ADCs?
ADS574KP-2 offers a direct 12-bit parallel result, an internal sampling function, and operation from a single +5 V supply. Modern serial ADCs often use fewer package pins and provide serial clocks and data lines, but their host interface and acquisition timing differ. ADS574KP-2 is appropriate when an established parallel bus design, legacy ADC574 compatibility, or deterministic 25 µs conversion window is more important than minimum pin count.

के लिए इंजीनियरिंग संदर्भ डेटा ADS574KP-2 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ADS574KP-2 for a 12-bit parallel ADC design that requires internal sampling, a 40 kSPS maximum conversion rate, and single +5 V operation while remaining within the device’s qualified operating grade. Choose ADS574KP when its documented grade and lifecycle conditions better match the equipment, since its 28-pin PDIP interface and conversion specifications align with the -2 version. Choose ADS574KE when its suffix-specific temperature rating is the best match and it is documented as an ADS574-family alternative. Consider ADC574 for maintaining an existing legacy design, but the manufacturer describes ADS574 as a drop-in replacement only in most applications, so verify input range, timing, logic levels, reference, and sampling behavior. None of these choices should be based solely on package shape; the suffix grade and system-level acquisition requirements remain decisive.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADS574KP ADS574KE ADC574
Package 28-pin PDIP 28-pin PDIP 28-pin PDIP 28-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments National Semiconductor
Resolution 12 bit 12 bit 12 bit 12 bit
Conversion Architecture Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR) Legacy ADC574 converter
Analog Input Count 1 input 1 input 1 input 1 input
Maximum Sampling Rate 40 kSPS 40 kSPS 40 kSPS 40 kSPS
Sampling Circuit Internal sample-and-hold Internal sample-and-hold Internal sample-and-hold External or legacy ADC574 sampling arrangement
Processor Interface Parallel microprocessor-compatible interface Parallel microprocessor-compatible interface Parallel microprocessor-compatible interface Parallel microprocessor interface

मुख्य विशेषताएँ

  • Integrated sampling simplifies the ADC574-class acquisition circuit (बनामADC574)
  • Same 12-bit SAR conversion performance within the ADS574 family (बनामADS574KP)
  • Alternative suffix grades use the same parallel converter architecture (बनामADS574KE)

डिज़ाइन नोट्स

Place the input, reference, and bypass connections according to the manufacturer datasheet and keep the analog input trace short. Route the 12 parallel data lines away from the sensitive input node, especially when the processor or external circuitry switches simultaneously with conversion. A continuous ground plane under the converter and its analog network reduces loop area and helps prevent digital return current from modulating the sampled voltage.

Establish the processor read sequence around the conversion-status signal and allow the full 25 µs maximum acquisition-and-conversion time before treating the output as valid. Account for propagation delay across the parallel bus when defining setup and hold timing. The 12-bit result bus creates a substantial number of switching edges, so series damping or other bus-conditioning techniques may be appropriate in systems with long traces or fast edge rates.

Operate the converter from a single supply within the documented 4.5 V to 5.5 V range. Place the manufacturer-recommended bypass capacitors close to the supply and ground pins, using the smallest practical loop. Check the supply’s settling behavior when conversion starts because the 40 kSPS maximum rate and 25 µs maximum conversion interval can expose insufficient supply decoupling. Confirm that logic and bus pull-up requirements match the processor interface.

Do not treat the ADS574KP-2 and ADC574 as interchangeable without reviewing input range, logic levels, reference behavior, timing, and acquisition circuits. The manufacturer describes ADS574 as a drop-in replacement for ADC574 models in most applications, but “most applications” leaves room for exceptions. Likewise, verify the operating-temperature implications of the -2 suffix and do not substitute another suffix solely because the package drawing is identical.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product listing identifies the exact ADS574KP-2 as RoHS compliant. No automotive qualification is stated for this device.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADS574KP-2 datasheet ADS574KP-2 pinout ADS574KP-2 datasheet pdf ADS574KP-2 specifications ADS574KP-2 equivalent ADS574KP-2 replacement ADS574KP-2 cross reference ADS574KP-2 vs ADS574KP ADS574KP-2 footprint ADS574KP-2 application circuit ADS574KP-2 price ADS574KP-2 stock Texas Instruments ADS574KP-2 28-pin PDIP 12-bit ADC

संबंधित कंपोनेंट्स और शब्द

Texas Instruments ADS574KP-2 ADS574KP ADS574KE ADC574 National Semiconductor Rochester Electronics analog-to-digital converter ADC successive-approximation converter SAR capacitor array CDAC internal sample-and-hold microprocessor-compatible interface parallel interface 12-bit resolution 40 kSPS single +5 V supply 28-pin PDIP industrial process monitoring digital panel meter laboratory instrumentation embedded control system legacy data acquisition RoHS
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें