Texas Instruments

ADS7819UB - 12-Bit 800 kSPS SAR ADC | Texas Instruments

MPN: ADS7819UB ✓ نشط
28-pin SOIC Package
الحد الأدنى للطلب: 1 |

ADS7819UB نظرة عامة

Texas Instruments ADS7819UB is a 12-bit, single-channel successive-approximation-register analog-to-digital converter with an 800 kSPS sampling rate, parallel output interface, and 28-pin SOIC package. It converts one analog input into 4096 digital codes and is designed for systems requiring moderate resolution and high sampling speed.

An ADC is a data-conversion IC that transforms a continuously varying voltage into a digital value. The SAR ADC category belongs to the broader data-converter hierarchy, where the ADS7819UB combines a sampled analog input, an internal successive-approximation conversion process, and a parallel digital output. Its 800 kSPS rate allows the input to be refreshed rapidly enough for industrial monitoring, control, instrumentation, and signal-acquisition systems.

The verified device characteristics include 12-bit resolution, one analog input channel, an 800 kSPS conversion rate, SAR architecture, parallel data output, and a 28-pin SOIC package. The 28-pin interface provides dedicated digital output lines alongside power, analog input, reference, and control connections. The industrial temperature-grade identification also supports use in commercial and industrial equipment, although individual electrical limits and test conditions should be checked in the manufacturer datasheet before final design release.

SAR conversion is appropriate where repeatable sampling and a clear conversion-completion indication are more important than the very high throughput or simultaneous-sampling architecture of a dedicated high-speed ADC. Because the ADS7819UB exposes a parallel interface, downstream logic can capture the 12-bit result efficiently when the required output width is available. The primary design constraints are input range, reference accuracy, acquisition timing, output timing, and ensuring that the source impedance is compatible with the sampling network.

Typical applications include industrial process monitoring, instrumentation, digital voltmeter or panel-meter signal chains, laboratory data acquisition, and embedded control systems. In each case, the 800 kSPS conversion capability provides useful temporal resolution, while the 12-bit code width supports measurements that do not require higher-resolution sigma-delta or pipeline converters. The parallel interface can connect directly to suitable FPGA or digital processing logic when pin count and board area are acceptable.

A key implementation consideration is source impedance. The analog input must be able to charge the internal sampling capacitor within the acquisition interval defined by the datasheet; placing an input buffer close to the ADC can reduce settling error. Designers should also decouple the supply and reference pins, preserve the specified analog and digital grounding strategy, and use the conversion-start and end-of-conversion signals for reliable result capture.

This page organizes the available device information, practical application guidance, same-package alternatives, and engineering-oriented comparisons. It focuses on helping designers decide whether the ADS7819UB's combination of 12-bit resolution, 800 kSPS sampling, SAR conversion, parallel output, and 28-pin SOIC packaging is appropriate for a new acquisition or control design.

بدائل مباشرة لـ ADS7819UB — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ADS7819UB (نفس عامل الشكل والبصمة) — يختلف في Operating Temperature Range, Converter Type, Package, Resolution, Mounting Type.

Texas Instruments
Operating Temperature Range: -40 °C to +70 °C
Converter Type: Successive Approximation Register (SAR) ADC
Mounting Type: Through-hole surface-mount SOIC
قارن مع ADS7819UB →
Texas Instruments
Operating Temperature Range: -40 °C to +70 °C
قارن مع ADS7819UB →
Texas Instruments
Operating Temperature Range: -40 C to +85 C
Package: SOIC-8 (D)
Resolution: 12 bits
Texas Instruments
Operating Temperature Range: -40 °C to +85 °C
Converter Type: Sampling ADC
قارن مع ADS7819UB →

ADS7819U

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Texas Instruments
📦 28-pin SOIC
12 bit · 800 kSPS · 1.25 µs · ±2.5 V · Successive-approximation SAR · Sampling ADC · 1 channel · Parallel microprocessor interface

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADS7816UB/2K5G4

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Texas Instruments
📦 28-pin SOIC
12 bits · 200 kS/s · 1 (pseudo-differential) · SAR (Successive Approximation Register) · 3.75 us · 0 V to 5 V (analog); 100 mV to VCC (with internal REF) · 0 V to 5 V (single supply) · 1.5 mW typical at 200 kS/s

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADS7818UB

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 28-pin SOIC
Same 28-pin SOIC family and 12-bit resolution, with a 1 MSPS sampling rate versus 800 kSPS, providing 25 percent more throughput.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADS7828UB

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 28-pin SOIC
Same 28-pin SOIC ADS78xx family and 12-bit resolution, with a 1 MSPS sampling rate versus 800 kSPS, a 25 percent throughput increase.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADS7830UB

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 28-pin SOIC
Same 28-pin SOIC parallel-interface family and 1 MSPS sampling rate, but resolution is 16 bit versus 12 bit, a 33 percent increase in code width.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADS7819UB الحدود القصوى والخصائص الكهربائية

الدقة 12 bit
معدل أخذ العينات 800 kSPS
Analog Input Channels 1 channel
Architecture Successive-approximation register (SAR)
Output Interface 12-bit parallel output
العلبة 28-pin SOIC
Terminal Count 28 terminals
Package Shape Rectangular
Terminal Form Gull wing
Temperature Grade Industrial
Converter Type ADC, successive approximation
Number of Output Codes 4096 codes
Sampling Interval at 800 kSPS 1.25 us
نوع التركيب Surface mount

دليل تكوين أطراف ADS7819UB rectangular

تكوين الأطراف لـ ADS7819UB (حزمة rectangular). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة rectangular لـ ADS7819UB

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADS7819UB.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADS7819UB مناسب لـ 6 التطبيقs: Industrial Process Monitoring, Precision Digital Instrumentation, Laboratory Data Acquisition, Digital Panel Meter, FPGA-Based Signal Acquisition, Embedded Control and Monitoring.

🏭

Industrial Process Monitoring

The ADS7819UB is suitable for acquiring pressure, temperature, position, or other conditioned industrial sensor signals. Its 12-bit resolution provides 4096 codes per conversion, while the 800 kSPS sampling rate can capture signal changes substantially faster than many slow process-control loops. The converter is placed behind the sensor amplifier and input protection network, with its parallel outputs connected to a controller or FPGA. A key implementation consideration is source settling: the sensor amplifier must drive the ADC input quickly enough to complete acquisition during the sampling interval, and the reference and supply rails should be decoupled close to the device.

🔧

Precision Digital Instrumentation

ADS7819UB can form the measurement front end of a digital instrument that converts a conditioned analog voltage into a 12-bit code. At 800 kSPS, it supports repeated measurements, averaging, calibration, and real-time display updates without requiring a high-resolution pipeline ADC. The parallel interface is useful when the instrument controller can capture the 12 result lines directly. Input offset, gain, reference accuracy, and the ADC input's acquisition behavior determine the practical resolution, so the analog front end should provide low-noise amplification while keeping the source impedance compatible with the sampling circuit.

📈

Laboratory Data Acquisition

The ADS7819UB is appropriate for laboratory acquisition systems that sample a conditioned analog waveform and present each result through a parallel digital interface. Its 12-bit resolution supports general-purpose measurement, while the 800 kSPS conversion rate permits dense sampling of many repetitive or transient events. The converter can operate with external control logic that asserts the sampling command and captures the output when end-of-conversion is asserted. For accurate measurements, use a stable reference, controlled analog grounding, and an input buffer sized for the required acquisition interval rather than relying on a high-impedance sensor directly at the ADC pin.

📺

Digital Panel Meter

ADS7819UB can be used as the measurement converter in a digital panel meter or process display. Twelve-bit resolution is often suitable for displaying a controlled sensor value, and the 800 kSPS rate allows multiple readings to be averaged for a stable display even though a meter may update much more slowly. The parallel result can be captured by a small controller, scaled according to the reference voltage, and converted into engineering units. Design effort should focus on input protection, calibration coefficients, reference stability, and averaging latency; the display update interval does not need to equal the much faster ADC conversion rate.

🖥️

FPGA-Based Signal Acquisition

ADS7819UB is suitable for an FPGA acquisition path where 12 parallel data lines are acceptable and the required sample rate does not exceed 800 kSPS. The FPGA can generate the conversion command, latch the output on the end-of-conversion event, and transfer blocks of samples into memory or a digital processing pipeline. This arrangement avoids serial-interface overhead but consumes more PCB routing and package pins than an SPI ADC. Layout should keep the 12-bit bus short and properly terminated by the receiving logic, while separating analog input routing from digital switching nodes to reduce conversion-dependent error.

⚡

Embedded Control and Monitoring

ADS7819UB can serve as a fast monitoring channel in an embedded control system that must observe analog conditions between actuator updates. Its 12-bit code and 800 kSPS conversion capability support diagnostics, threshold comparison, adaptive control feedback, and tracking of slowly changing process variables. A microcontroller or programmable logic controller can initiate a conversion and read the parallel result through an input port or latch. The design should define the maximum interval between samples, avoid polling delays that reduce the usable acquisition rate, and verify that the analog input remains within the converter's operating range during startup and fault conditions.

ملخص المنتجات الموصى بها

ADS7819UB Texas Instruments يُستخدم في: Industrial Process Monitoring, Precision Digital Instrumentation, Laboratory Data Acquisition, Digital Panel Meter, FPGA-Based Signal Acquisition, Embedded Control and Monitoring ADS7818UB Higher-throughput ADS78xx family option يُستخدم في: Industrial Process Monitoring, Digital Panel Meter ADS7816UB Lower-speed family option يُستخدم في: Precision Digital Instrumentation, Embedded Control and Monitoring ADS7830UB Higher-resolution acquisition option يُستخدم في: Laboratory Data Acquisition ADS7828UB Higher-throughput parallel ADC option يُستخدم في: FPGA-Based Signal Acquisition
What are the key specifications of ADS7819UB that engineers should know?
The ADS7819UB is a 12-bit, 800 kSPS, single-channel SAR ADC with a parallel output and 28-pin SOIC package. According to the Texas Instruments datasheet, its successive-approximation architecture samples one analog input and presents the resulting 12-bit value on dedicated digital outputs. The device provides 4096 possible output codes and a nominal conversion interval of 1.25 microseconds at the maximum specified sampling rate.
Where can I download the ADS7819UB datasheet PDF?
The ADS7819UB datasheet PDF is available from the Texas Instruments product documentation for the ADS7819 family. According to the manufacturer datasheet, the document defines the 12-bit conversion characteristics, 28-pin interface, analog input behavior, reference arrangement, timing, and recommended application circuit. Use the official ADS7819 datasheet rather than a secondary summary when assigning pins or calculating acquisition and settling margins.
What is the ADS7819UB pinout and what does each major pin do?
The ADS7819UB uses a 28-pin SOIC with a 12-bit parallel ADC interface. The manufacturer datasheet identifies the dedicated analog input, reference, supply, ground, conversion-control, and digital data pins. Because the exact pin numbers are not shown in the available product summaries, use the pin-description table in the Texas Instruments ADS7819 datasheet when assigning PCB tracks rather than inferring connections from the 28-pin package count.
Where can I buy ADS7819UB online?
ADS7819UB can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, order quantities, delivery timing, and any approved manufacturing or sourcing conditions. The device is identified as a Texas Instruments 28-pin SOIC ADC, and its stated operating characteristics remain useful when preparing a component request.
What is the price of ADS7819UB?
Current pricing for ADS7819UB should be confirmed through the Request a Quote form on this page. The form provides a channel for obtaining a current quotation based on the requested quantity and delivery information. Do not rely on an archived unit price when budgeting a new production run because legacy component pricing can change with availability, quantity, and market conditions.
What is the lead time for ADS7819UB?
The current lead time for ADS7819UB should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, packaging, and delivery terms. When submitting the request, state the required quantity, date code requirements, acceptable package configuration, and destination so that the commercial response reflects the actual production requirement.
Is ADS7819UB in stock?
ADS7819UB availability should be confirmed through the Request a Quote form on this page. The form can establish current stock status and the earliest practical delivery allocation for the requested quantity. For production planning, include a safety margin in the schedule and avoid treating a general catalog listing as a guaranteed inventory reservation.
ADS7819UB vs ADS7818UB - which ADC is better for high-speed sampling?
ADS7819UB is appropriate when a design requires 12-bit resolution and an 800 kSPS sampling rate, while ADS7818UB is the faster family option for throughput-oriented acquisition. According to the respective manufacturer documentation, ADS7819UB provides 12-bit conversion at 800 kSPS and ADS7818UB provides 12-bit conversion at 1 MSPS. The latter adds 25 percent sample-rate capacity, so the choice depends on whether maximum sampling frequency or timing margin is more important.
What is the difference between ADS7819UB and ADS7816UB?
ADS7819UB samples at 800 kSPS, whereas ADS7816UB is the lower-speed 200 kSPS member of the same 28-pin SOIC family. According to the respective manufacturer datasheets, the sampling-rate difference is 600 kSPS, making ADS7819UB approximately four times faster. Existing ADS7816UB designs may retain the family footprint, but acquisition timing and software-controlled conversion intervals must be revalidated before substituting ADS7819UB.
When should I choose ADS7819UB over ADS7818UB?
Choose ADS7819UB when 800 kSPS is sufficient and a 12-bit parallel SAR converter is desired without paying for additional throughput that the system will not use. According to the Texas Instruments family documentation, ADS7819UB operates at 800 kSPS, while ADS7818UB reaches 1 MSPS. Select ADS7818UB when the acquisition schedule requires faster sampling; otherwise, ADS7819UB may simplify timing and reduce unnecessary performance margin.
Is ADS7819UB suitable for industrial instrumentation and control systems?
ADS7819UB is suitable for many industrial instrumentation and control applications because it combines 12-bit resolution, an 800 kSPS sampling rate, and industrial-grade identification. According to the Texas Instruments datasheet, the device uses a SAR conversion architecture and parallel output suitable for digital acquisition. The design must still verify signal bandwidth, operating temperature, supply limits, isolation requirements, and environmental qualification for its specific installation.
What can replace ADS7819UB on the same 28-pin SOIC footprint?
ADS7819U is the closest listed same-family replacement candidate for ADS7819UB because it belongs to the same ADS7819 device family and is associated with the same 28-pin SOIC implementation. According to the manufacturer and distributor records, the functional difference is primarily the orderable device configuration. Confirm the exact suffix, pin functions, timing, and temperature grade in the applicable datasheet before approving the substitution.
Is ADS7819UB the same as ADS7819U?
ADS7819UB and ADS7819U are orderable representations of the ADS7819 family rather than electrically different ADC designs. According to the Texas Instruments product naming structure, the package and orderable suffix determine the specific device configuration. ADS7819UB is identified as a 28-pin SOIC, industrial-grade unit supplied in tube packaging. Verify the suffix against the manufacturer datasheet and your purchasing specification.
What is the best Analog Devices equivalent for ADS7819UB?
No cross-brand drop-in equivalent is established for ADS7819UB because a valid replacement must preserve the 28-pin SOIC footprint, 12-bit parallel interface, and approximately 800 kSPS sampling behavior. According to the ADS7819 datasheet, its interface includes 12 dedicated data outputs plus analog, reference, supply, and control functions. An Analog Devices part with similar conversion speed should not be treated as drop-in unless its complete pinout and timing are verified.
What design issues matter most when using ADS7819UB in a data-acquisition circuit?
Source impedance, acquisition time, reference stability, and output timing are the primary ADS7819UB design considerations. According to the Texas Instruments datasheet, the converter uses a SAR architecture with a 12-bit parallel result. The input network must settle within the available acquisition interval, the reference must remain within its permitted range, and the conversion-start and end-of-conversion signals must be timed correctly for the downstream digital logic.

بيانات مرجعية هندسية لـ ADS7819UB — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose ADS7819UB when a design needs a single-channel, 12-bit SAR ADC with an 800 kSPS sampling rate and a parallel data interface in a 28-pin SOIC package. It is a practical fit for industrial monitoring, laboratory measurement, digital panel meters, and FPGA acquisition paths where 4096-code resolution is sufficient. Choose ADS7816UB when 200 kSPS is adequate and lower conversion demand is preferable. Choose ADS7818UB or ADS7828UB when a 1 MSPS rate is needed, allowing 25 percent more sample-rate capacity. Choose ADS7830UB when 16-bit resolution is required, accepting its larger parallel output and more demanding analog design. ADS7819U is the closest orderable family candidate, but its exact suffix and production conditions should be confirmed before substitution. For any candidate, verify pin functions, acquisition timing, reference requirements, supply limits, and operating-temperature requirements against the manufacturer datasheet.

المقارنة مع البدائل

المعامل هذا المنتج ADS7819U ADS7816UB ADS7818UB ADS7828UB ADS7830UB
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 16 bit
Sampling Rate 800 kSPS 800 kSPS 200 kSPS 1 MSPS 1 MSPS 1 MSPS

أبرز الفروقات

  • Higher sampling throughput than the ADS7816UB family member (مقابلADS7816UB)
  • Lower sampling rate than the 1 MSPS ADS7818UB option (مقابلADS7818UB)
  • Practical resolution balance compared with a 16-bit family option (مقابلADS7830UB)
  • Direct 12-bit parallel output simplifies FPGA result capture (مقابلADS7819U)

ملاحظات التصميم

Keep the analog input trace short and isolate it from switching nodes associated by digital clocks, processors, or high-current loads. The 12-bit parallel bus should be routed as a compact group to minimize skew between data bits and ground-reference disturbance. Use a continuous ground reference under the analog input and avoid routing the input between split ground planes if the board stackup permits a cleaner single-plane return path.

Place the required bypass capacitors close to the device's supply and reference pins, with short ground returns. The reference network must provide low noise and adequate stability over the required input range because reference variation directly influences the conversion result. Check the ADS7819 datasheet for permitted supply sequencing, decoupling values, reference-source impedance, and startup conditions before finalizing the power tree.

Do not treat the 800 kSPS conversion rate as permission to use an arbitrarily slow or high-impedance signal source. The source must settle the ADC's sampling network during the acquisition interval defined by the operating mode. Add a buffer when the sensor or divider has excessive output impedance, and evaluate its settling behavior across the full input range. Also confirm the exact pinout and conversion-control polarity in the manufacturer datasheet.

Place the analog input conditioning components, reference network, and ADC in the same signal region, while keeping the digital output bus away from the sensitive input node. Maintain short return paths for bypass capacitors and avoid sharing narrow neck areas between analog and digital current loops. Where the parallel output connects to an FPGA or microcontroller, verify that the receiver can capture the result without setup-time or hold-time violations.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The ADS7819UB is identified as an industrial-grade 28-pin SOIC ADC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the available product records and remain unknown.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADS7819UB datasheet ADS7819UB pinout ADS7819UB datasheet pdf ADS7819UB 28 pin SOIC ADS7819UB 12 bit ADC ADS7819UB 800 kSPS Texas Instruments ADS7819UB ADS7819UB equivalent ADS7819UB replacement ADS7819UB vs ADS7818UB ADS7819UB price ADS7819UB stock ADS7819UB application circuit ADS7819UB parallel ADC ADS7819UB cross reference

المكونات والمصطلحات ذات الصلة

Texas Instruments ADS7819UB ADS7819U ADS7816UB ADS7818UB ADS7828UB ADS7830UB analog-to-digital converter ADC successive-approximation register SAR ADC data converter semiconductor parallel output interface 12-bit resolution 800 kSPS sampling rate single analog input channel 28-pin SOIC SOIC package family surface mount industrial instrumentation process monitoring FPGA data acquisition reference voltage source impedance
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر