ADS7819UB - 12-Bit 800 kSPS SAR ADC | Texas Instruments
MPN: ADS7819UB ✓ פעילADS7819UB סקירה
An ADC is a data-conversion IC that transforms a continuously varying voltage into a digital value. The SAR ADC category belongs to the broader data-converter hierarchy, where the ADS7819UB combines a sampled analog input, an internal successive-approximation conversion process, and a parallel digital output. Its 800 kSPS rate allows the input to be refreshed rapidly enough for industrial monitoring, control, instrumentation, and signal-acquisition systems.
The verified device characteristics include 12-bit resolution, one analog input channel, an 800 kSPS conversion rate, SAR architecture, parallel data output, and a 28-pin SOIC package. The 28-pin interface provides dedicated digital output lines alongside power, analog input, reference, and control connections. The industrial temperature-grade identification also supports use in commercial and industrial equipment, although individual electrical limits and test conditions should be checked in the manufacturer datasheet before final design release.
SAR conversion is appropriate where repeatable sampling and a clear conversion-completion indication are more important than the very high throughput or simultaneous-sampling architecture of a dedicated high-speed ADC. Because the ADS7819UB exposes a parallel interface, downstream logic can capture the 12-bit result efficiently when the required output width is available. The primary design constraints are input range, reference accuracy, acquisition timing, output timing, and ensuring that the source impedance is compatible with the sampling network.
Typical applications include industrial process monitoring, instrumentation, digital voltmeter or panel-meter signal chains, laboratory data acquisition, and embedded control systems. In each case, the 800 kSPS conversion capability provides useful temporal resolution, while the 12-bit code width supports measurements that do not require higher-resolution sigma-delta or pipeline converters. The parallel interface can connect directly to suitable FPGA or digital processing logic when pin count and board area are acceptable.
A key implementation consideration is source impedance. The analog input must be able to charge the internal sampling capacitor within the acquisition interval defined by the datasheet; placing an input buffer close to the ADC can reduce settling error. Designers should also decouple the supply and reference pins, preserve the specified analog and digital grounding strategy, and use the conversion-start and end-of-conversion signals for reliable result capture.
This page organizes the available device information, practical application guidance, same-package alternatives, and engineering-oriented comparisons. It focuses on helping designers decide whether the ADS7819UB's combination of 12-bit resolution, 800 kSPS sampling, SAR conversion, parallel output, and 28-pin SOIC packaging is appropriate for a new acquisition or control design.
חלופות תחליף ישיר עבור ADS7819UB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADS7819UB (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature Range, Converter Type, Package, Resolution, Mounting Type.
ADS7819U
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS7816UB/2K5G4
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADS7818UB
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ADS7828UB
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ADS7830UB
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
ADS7819UB דירוגים מרביים ומאפיינים חשמליים
| רזולוציה | 12 bit |
| קצב דגימה | 800 kSPS |
| Analog Input Channels | 1 channel |
| Architecture | Successive-approximation register (SAR) |
| Output Interface | 12-bit parallel output |
| מארז | 28-pin SOIC |
| Terminal Count | 28 terminals |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Converter Type | ADC, successive approximation |
| Number of Output Codes | 4096 codes |
| Sampling Interval at 800 kSPS | 1.25 us |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של ADS7819UB rectangular
תצורת פינים עבור ADS7819UB (מארזת rectangular). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור ADS7819UB.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADS7819UB מתאים עבור 6 יישוםs: Industrial Process Monitoring, Precision Digital Instrumentation, Laboratory Data Acquisition, Digital Panel Meter, FPGA-Based Signal Acquisition, Embedded Control and Monitoring.
Industrial Process Monitoring
The ADS7819UB is suitable for acquiring pressure, temperature, position, or other conditioned industrial sensor signals. Its 12-bit resolution provides 4096 codes per conversion, while the 800 kSPS sampling rate can capture signal changes substantially faster than many slow process-control loops. The converter is placed behind the sensor amplifier and input protection network, with its parallel outputs connected to a controller or FPGA. A key implementation consideration is source settling: the sensor amplifier must drive the ADC input quickly enough to complete acquisition during the sampling interval, and the reference and supply rails should be decoupled close to the device.
מומלץ
Precision Digital Instrumentation
ADS7819UB can form the measurement front end of a digital instrument that converts a conditioned analog voltage into a 12-bit code. At 800 kSPS, it supports repeated measurements, averaging, calibration, and real-time display updates without requiring a high-resolution pipeline ADC. The parallel interface is useful when the instrument controller can capture the 12 result lines directly. Input offset, gain, reference accuracy, and the ADC input's acquisition behavior determine the practical resolution, so the analog front end should provide low-noise amplification while keeping the source impedance compatible with the sampling circuit.
מומלץ
Laboratory Data Acquisition
The ADS7819UB is appropriate for laboratory acquisition systems that sample a conditioned analog waveform and present each result through a parallel digital interface. Its 12-bit resolution supports general-purpose measurement, while the 800 kSPS conversion rate permits dense sampling of many repetitive or transient events. The converter can operate with external control logic that asserts the sampling command and captures the output when end-of-conversion is asserted. For accurate measurements, use a stable reference, controlled analog grounding, and an input buffer sized for the required acquisition interval rather than relying on a high-impedance sensor directly at the ADC pin.
מומלץ
Digital Panel Meter
ADS7819UB can be used as the measurement converter in a digital panel meter or process display. Twelve-bit resolution is often suitable for displaying a controlled sensor value, and the 800 kSPS rate allows multiple readings to be averaged for a stable display even though a meter may update much more slowly. The parallel result can be captured by a small controller, scaled according to the reference voltage, and converted into engineering units. Design effort should focus on input protection, calibration coefficients, reference stability, and averaging latency; the display update interval does not need to equal the much faster ADC conversion rate.
מומלץ
FPGA-Based Signal Acquisition
ADS7819UB is suitable for an FPGA acquisition path where 12 parallel data lines are acceptable and the required sample rate does not exceed 800 kSPS. The FPGA can generate the conversion command, latch the output on the end-of-conversion event, and transfer blocks of samples into memory or a digital processing pipeline. This arrangement avoids serial-interface overhead but consumes more PCB routing and package pins than an SPI ADC. Layout should keep the 12-bit bus short and properly terminated by the receiving logic, while separating analog input routing from digital switching nodes to reduce conversion-dependent error.
מומלץ
Embedded Control and Monitoring
ADS7819UB can serve as a fast monitoring channel in an embedded control system that must observe analog conditions between actuator updates. Its 12-bit code and 800 kSPS conversion capability support diagnostics, threshold comparison, adaptive control feedback, and tracking of slowly changing process variables. A microcontroller or programmable logic controller can initiate a conversion and read the parallel result through an input port or latch. The design should define the maximum interval between samples, avoid polling delays that reduce the usable acquisition rate, and verify that the analog input remains within the converter's operating range during startup and fault conditions.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADS7819UB — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADS7819U | ADS7816UB | ADS7818UB | ADS7828UB | ADS7830UB |
|---|---|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 16 bit |
| Sampling Rate | 800 kSPS | 800 kSPS | 200 kSPS | 1 MSPS | 1 MSPS | 1 MSPS |
מבדילים עיקריים
- Higher sampling throughput than the ADS7816UB family member (לעומתADS7816UB)
- Lower sampling rate than the 1 MSPS ADS7818UB option (לעומתADS7818UB)
- Practical resolution balance compared with a 16-bit family option (לעומתADS7830UB)
- Direct 12-bit parallel output simplifies FPGA result capture (לעומתADS7819U)
הערות תכנון
Keep the analog input trace short and isolate it from switching nodes associated by digital clocks, processors, or high-current loads. The 12-bit parallel bus should be routed as a compact group to minimize skew between data bits and ground-reference disturbance. Use a continuous ground reference under the analog input and avoid routing the input between split ground planes if the board stackup permits a cleaner single-plane return path.
Place the required bypass capacitors close to the device's supply and reference pins, with short ground returns. The reference network must provide low noise and adequate stability over the required input range because reference variation directly influences the conversion result. Check the ADS7819 datasheet for permitted supply sequencing, decoupling values, reference-source impedance, and startup conditions before finalizing the power tree.
Do not treat the 800 kSPS conversion rate as permission to use an arbitrarily slow or high-impedance signal source. The source must settle the ADC's sampling network during the acquisition interval defined by the operating mode. Add a buffer when the sensor or divider has excessive output impedance, and evaluate its settling behavior across the full input range. Also confirm the exact pinout and conversion-control polarity in the manufacturer datasheet.
Place the analog input conditioning components, reference network, and ADC in the same signal region, while keeping the digital output bus away from the sensitive input node. Maintain short return paths for bypass capacitors and avoid sharing narrow neck areas between analog and digital current loops. Where the parallel output connects to an FPGA or microcontroller, verify that the receiver can capture the result without setup-time or hold-time violations.
מידע על תאימות
The ADS7819UB is identified as an industrial-grade 28-pin SOIC ADC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the available product records and remain unknown.