ADS801UG4 - 12-Bit 25 MSPS ADC | Texas Instruments
MPN: ADS801UG4 ✗ انتهى عمره الإنتاجيADS801UG4 نظرة عامة
An ADC is an interface IC that converts continuous analog voltage into digital data for processing, measurement, or control. The ADS801UG4 uses a pipelined architecture to provide high sampling throughput for communications, instrumentation, industrial control, and signal-processing systems. Its parallel interface exposes the converted digital result directly through dedicated output lines rather than relying on a serial serial protocol.
The main operating characteristics are 12-bit resolution, a 25 MSPS conversion rate, one ADC input, and a 4.75 V to 5.25 V analog supply range. The device accepts single-ended or differential input configurations and includes internal reference options according to the manufacturer product information. The 28-SOIC package supports conventional surface-mount assembly while providing separate analog, digital, reference, and interface connections.
The ADS801UG4 is positioned as a high-speed sampling ADC rather than a low-frequency precision converter. A 25 MSPS rate allows the converter to capture rapidly changing waveforms, while 12-bit resolution provides 4096 digital code levels for amplitude representation. Differential input operation can improve signal-to-noise performance and reject common-mode noise when the analog front end is designed for it.
Typical applications include communications receivers, data acquisition systems, digital oscilloscope and waveform-processing equipment, industrial measurement systems, control loops, and embedded signal-processing platforms. The parallel output requires sufficient board routing space and careful account of output timing, input settling, clock distribution, and grounding.
When designing around this ADC, begin with the input bandwidth and acquisition requirements, then determine whether single-ended or differential signaling is appropriate. Validate the analog input settling time, clock jitter, reference arrangement, output timing, and digital return paths with the manufacturer datasheet. The ADS801UG4 is listed as obsolete by one distributor, so new designs should confirm lifecycle status and sourcing before committing to the device.
This page combines manufacturer and distributor information with practical engineering guidance for pin-compatible family alternatives, application selection, PCB considerations, and supply-chain planning.
بدائل مباشرة لـ ADS801UG4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ADS801UG4 (نفس عامل الشكل والبصمة) — يختلف في Package, Architecture, Sampling Rate, Supply Voltage.
ADS801U
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADS800U
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADS802E
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ADS801UG4 الحدود القصوى والخصائص الكهربائية
| الدقة | 12 bit |
| معدل أخذ العينات | 25 MSPS |
| Number of Inputs | 1 input |
| Input Type | Single-ended or differential |
| Data Interface | Parallel |
| Architecture | Pipelined |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Number of A/D Converters | 1 |
| Sample-and-Hold Ratio | 1:1 |
| العلبة | 28-pin SOIC |
| Package Width | 7.50 mm |
| نطاق درجة حرارة التشغيل | -40 C to +85 C |
| Reference | Internal reference |
| الواجهة | Parallel digital output |
| نوع التركيب | Surface Mount |
| Status | Obsolete |
دليل تكوين أطراف ADS801UG4 7.50 mm
تكوين الأطراف لـ ADS801UG4 (حزمة 7.50 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADS801UG4.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ADS801UG4 مناسب لـ 6 التطبيقs: Communications Receiver, Data Acquisition System, Industrial Process Measurement, Digital Oscilloscope Front End, Radar and Signal Processing, Embedded Control and Monitoring.
Communications Receiver
The ADS801UG4 is appropriate for receiver front ends that require digitized intermediate-frequency or baseband signals at up to 25 MSPS. Its 12-bit pipelined conversion and parallel output provide a direct digital handoff to FPGA or DSP logic. In this circuit role, drive the selected single-ended or differential input with an appropriate low-noise amplifier and termination network, while keeping the ADC clock and analog return path short. The principal performance considerations are input settling, clock jitter, common-mode control, and keeping switching-node energy away from the conversion input. Use the manufacturer timing data to verify that the source can settle within the sampling interval.
موصى به
Data Acquisition System
The ADS801UG4 can serve as the capture element in a medium- to high-speed data acquisition system requiring 25 MSPS throughput and 12-bit digital codes. Place it behind a controlled analog front end so the source impedance, gain, bandwidth, and settling behavior match the ADC requirements. The parallel interface supports direct connection to FPGA input registers when routing is planned carefully. Use a solid ground plane and separate analog and digital return currents where practical, and treat the clock as a high-quality signal. Validate gain error, bandwidth, noise, and acquisition timing in the complete system rather than assuming nominal resolution alone determines performance.
موصى به
Industrial Process Measurement
The ADS801UG4 can digitize rapidly changing process signals when the control platform requires higher sample rates than a conventional slow-resolution SAR converter. Differential input is useful for transducer bridges and instrumentation signals that reject common-mode disturbance. The analog conditioning stage should provide the required gain and bandwidth while limiting source impedance and controlling differential-mode and common-mode voltage. Because the converter uses a parallel output, allocate routing space and keep the digital bus away from sensitive input traces. The 4.75 V to 5.25 V operating range must be reconciled with the surrounding analog, logic, and isolation architecture.
موصى به
Digital Oscilloscope Front End
The ADS801UG4 is suited to acquisition channels in waveform-measurement equipment operating at up to 25 MSPS with 12-bit resolution. It can digitize repetitive or burst waveforms before FPGA logic performs triggering, filtering, decimation, and display processing. The input amplifier path must preserve signal fidelity across the required bandwidth, and the sampling clock should have low jitter to avoid timing uncertainty. Keep output routing orderly because the parallel bus contains numerous fast digital transitions. For oscilloscope-grade behavior, evaluate noise, aperture, gain accuracy, and settling in the complete analog channel rather than relying only on the ADC's nominal bit count.
موصى به
Radar and Signal Processing
The ADS801UG4 can support intermediate signal capture in radar, sonar, or related signal-processing systems where a 25 MSPS conversion rate and parallel digital output simplify connection to FPGA fabric. Differential input is advantageous when the receiver produces a balanced signal and system-level common-mode rejection is important. The receiver chain should present low noise and controlled impedance to the converter, while the clocking scheme must provide the timing stability needed for coherent processing. Place decoupling and return paths according to the manufacturer's guidance, isolate high-current switching stages, and evaluate aliasing with an appropriate analog or digital antialias filter before the acquired data is used.
موصى به
Embedded Control and Monitoring
The ADS801UG4 can be used in embedded monitoring equipment when a control or data-logging subsystem must capture dynamic analog variables at a higher rate than a general-purpose microcontroller ADC. The 12-bit code and 25 MSPS throughput provide a practical balance between resolution, speed, and implementation complexity. Use the parallel output to feed an FPGA or high-speed capture logic, and ensure the analog signal is conditioned to prevent overload. Because the device is obsolete, it is best suited to maintaining an existing qualified design rather than broadly introducing it into new platforms. Verify operating temperature, supply tolerance, clocking, and lifecycle constraints during any redesign.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ADS801UG4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ADS801U | ADS800 | ADS802 |
|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
أبرز الفروقات
- Direct same-family replacement path (مقابلADS801U)
- TI-supported family compatibility (مقابلADS800)
- Parallel-output architecture (مقابلADS802)
ملاحظات التصميم
Treat the ADS801UG4 clock as a high-quality signal. Route it over a continuous ground plane, minimize stubs and unnecessary vias, and isolate it from switching-node and high-current return paths. Use the manufacturer timing diagrams to verify setup and hold requirements at the receiving logic. If the source is distant, buffer the clock locally rather than allowing long PCB traces to radiate or pick up noise.
Place the ADC and its input-conditioning components close to the signal source, with short, impedance-controlled analog traces. Keep the parallel output bus orderly and provide a continuous reference plane beneath it. Separate analog and digital return currents where the architecture permits, and use local decoupling close to the supply pins. Check the package and pin assignments against the ADS801 datasheet before fabrication because the 28-SOIC footprint is not represented by a dedicated package drawing in this record.
Do not select a replacement from package appearance alone. Confirm input range, common-mode voltage, reference configuration, clock polarity, output timing, supply sequencing, and temperature grade in the manufacturer datasheet. The verified cross-reference information supports ADS801U compatibility and identifies ADS800 and ADS802 as pin-compatible family parts, but it does not establish identical specifications for every family member.
معلومات الامتثال
The verified product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact MPN.