Texas Instruments

ADS801UG4 - 12-Bit 25 MSPS ADC | Texas Instruments

Teilenummer: ADS801UG4 ✗ Abgekündigt
4.75 V to 5.25 V Vdss 28-pin SOIC Package
MOQ: 1 |

ADS801UG4 Übersicht

The Texas Instruments ADS801UG4 is a 12-bit, 25 MSPS, single-channel pipelined analog-to-digital converter with single-ended and differential inputs, parallel output, and internal references. It is housed in a 28-pin SOIC package and operates from a 4.75 V to 5.25 V supply.

An ADC is an interface IC that converts continuous analog voltage into digital data for processing, measurement, or control. The ADS801UG4 uses a pipelined architecture to provide high sampling throughput for communications, instrumentation, industrial control, and signal-processing systems. Its parallel interface exposes the converted digital result directly through dedicated output lines rather than relying on a serial serial protocol.

The main operating characteristics are 12-bit resolution, a 25 MSPS conversion rate, one ADC input, and a 4.75 V to 5.25 V analog supply range. The device accepts single-ended or differential input configurations and includes internal reference options according to the manufacturer product information. The 28-SOIC package supports conventional surface-mount assembly while providing separate analog, digital, reference, and interface connections.

The ADS801UG4 is positioned as a high-speed sampling ADC rather than a low-frequency precision converter. A 25 MSPS rate allows the converter to capture rapidly changing waveforms, while 12-bit resolution provides 4096 digital code levels for amplitude representation. Differential input operation can improve signal-to-noise performance and reject common-mode noise when the analog front end is designed for it.

Typical applications include communications receivers, data acquisition systems, digital oscilloscope and waveform-processing equipment, industrial measurement systems, control loops, and embedded signal-processing platforms. The parallel output requires sufficient board routing space and careful account of output timing, input settling, clock distribution, and grounding.

When designing around this ADC, begin with the input bandwidth and acquisition requirements, then determine whether single-ended or differential signaling is appropriate. Validate the analog input settling time, clock jitter, reference arrangement, output timing, and digital return paths with the manufacturer datasheet. The ADS801UG4 is listed as obsolete by one distributor, so new designs should confirm lifecycle status and sourcing before committing to the device.

This page combines manufacturer and distributor information with practical engineering guidance for pin-compatible family alternatives, application selection, PCB considerations, and supply-chain planning.

Drop-in-Alternativen für ADS801UG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ADS801UG4 (gleiche Bauform und Footprint) – abweichend in Package, Architecture, Sampling Rate, Supply Voltage.

Texas Instruments
Package: SOIC (DW), 28 pins
Architecture: Pipelined ADC
Supply Voltage: +5 V
Vergleichen mit ADS801UG4 →
Texas Instruments
Package: 28-SSOP
Sampling Rate: 10 MSPS
Supply Voltage: +5 V single supply
Vergleichen mit ADS801UG4 →

ADS801U

✅ Drop-In
Texas Instruments
📦 28-SOIC
Kompatible Spezifikationen

Preis auf Anfrage

Datenblatt ansehen →

ADS800U

✅ Drop-In
Texas Instruments
📦 28-SOIC
12 bit · 40 MSPS · Pipelined ADC · Single-ended or differential · 1 analog input · Internal reference · 390 mW · 65 MHz

Preis auf Anfrage

Datenblatt ansehen →

ADS802E

✅ Drop-In
Texas Instruments
📦 28-SOIC
12 bit · 10 MSPS · Single-ended or differential · 1 analog input · 65 MHz · Internal reference · +5 V single supply · 250 mW

Preis auf Anfrage

Datenblatt ansehen →

ADS801UG4 Grenzwerte & elektrische Eigenschaften

Auflösung 12 bit
Abtastrate 25 MSPS
Number of Inputs 1 input
Input Type Single-ended or differential
Data Interface Parallel
Architecture Pipelined
Analog Supply Voltage 4.75 V to 5.25 V
Number of A/D Converters 1
Sample-and-Hold Ratio 1:1
Gehäuse 28-pin SOIC
Package Width 7.50 mm
Betriebstemperaturbereich -40 C to +85 C
Reference Internal reference
Schnittstelle Parallel digital output
Montageart Surface Mount
Status Obsolete

ADS801UG4 7.50 mm Pinbelegungsleitfaden

Pinbelegung für ADS801UG4 (7.50 mm-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für ADS801UG4 im 7.50 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ADS801UG4.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ADS801UG4 ist geeignet für 6 Anwendungs: Communications Receiver, Data Acquisition System, Industrial Process Measurement, Digital Oscilloscope Front End, Radar and Signal Processing, Embedded Control and Monitoring.

🌐

Communications Receiver

The ADS801UG4 is appropriate for receiver front ends that require digitized intermediate-frequency or baseband signals at up to 25 MSPS. Its 12-bit pipelined conversion and parallel output provide a direct digital handoff to FPGA or DSP logic. In this circuit role, drive the selected single-ended or differential input with an appropriate low-noise amplifier and termination network, while keeping the ADC clock and analog return path short. The principal performance considerations are input settling, clock jitter, common-mode control, and keeping switching-node energy away from the conversion input. Use the manufacturer timing data to verify that the source can settle within the sampling interval.

🖥️

Data Acquisition System

The ADS801UG4 can serve as the capture element in a medium- to high-speed data acquisition system requiring 25 MSPS throughput and 12-bit digital codes. Place it behind a controlled analog front end so the source impedance, gain, bandwidth, and settling behavior match the ADC requirements. The parallel interface supports direct connection to FPGA input registers when routing is planned carefully. Use a solid ground plane and separate analog and digital return currents where practical, and treat the clock as a high-quality signal. Validate gain error, bandwidth, noise, and acquisition timing in the complete system rather than assuming nominal resolution alone determines performance.

🏭

Industrial Process Measurement

The ADS801UG4 can digitize rapidly changing process signals when the control platform requires higher sample rates than a conventional slow-resolution SAR converter. Differential input is useful for transducer bridges and instrumentation signals that reject common-mode disturbance. The analog conditioning stage should provide the required gain and bandwidth while limiting source impedance and controlling differential-mode and common-mode voltage. Because the converter uses a parallel output, allocate routing space and keep the digital bus away from sensitive input traces. The 4.75 V to 5.25 V operating range must be reconciled with the surrounding analog, logic, and isolation architecture.

📺

Digital Oscilloscope Front End

The ADS801UG4 is suited to acquisition channels in waveform-measurement equipment operating at up to 25 MSPS with 12-bit resolution. It can digitize repetitive or burst waveforms before FPGA logic performs triggering, filtering, decimation, and display processing. The input amplifier path must preserve signal fidelity across the required bandwidth, and the sampling clock should have low jitter to avoid timing uncertainty. Keep output routing orderly because the parallel bus contains numerous fast digital transitions. For oscilloscope-grade behavior, evaluate noise, aperture, gain accuracy, and settling in the complete analog channel rather than relying only on the ADC's nominal bit count.

✈️

Radar and Signal Processing

The ADS801UG4 can support intermediate signal capture in radar, sonar, or related signal-processing systems where a 25 MSPS conversion rate and parallel digital output simplify connection to FPGA fabric. Differential input is advantageous when the receiver produces a balanced signal and system-level common-mode rejection is important. The receiver chain should present low noise and controlled impedance to the converter, while the clocking scheme must provide the timing stability needed for coherent processing. Place decoupling and return paths according to the manufacturer's guidance, isolate high-current switching stages, and evaluate aliasing with an appropriate analog or digital antialias filter before the acquired data is used.

🧩

Embedded Control and Monitoring

The ADS801UG4 can be used in embedded monitoring equipment when a control or data-logging subsystem must capture dynamic analog variables at a higher rate than a general-purpose microcontroller ADC. The 12-bit code and 25 MSPS throughput provide a practical balance between resolution, speed, and implementation complexity. Use the parallel output to feed an FPGA or high-speed capture logic, and ensure the analog signal is conditioned to prevent overload. Because the device is obsolete, it is best suited to maintaining an existing qualified design rather than broadly introducing it into new platforms. Verify operating temperature, supply tolerance, clocking, and lifecycle constraints during any redesign.

Zusammenfassung der empfohlenen Produkte

ADS800 Pin-compatible ADC family member Verwendet in: Communications Receiver, Data Acquisition System, Industrial Process Measurement, Radar and Signal Processing, Embedded Control and Monitoring ADS802 Pin-compatible ADC family member Verwendet in: Communications Receiver, Industrial Process Measurement, Digital Oscilloscope Front End, Radar and Signal Processing, Embedded Control and Monitoring ADS801U Texas Instruments Verwendet in: Data Acquisition System, Digital Oscilloscope Front End, Embedded Control and Monitoring
What is the ADS801UG4?
The ADS801UG4 is a Texas Instruments 12-bit, 25 MSPS, single-channel pipelined ADC with parallel digital output and single-ended or differential inputs. According to the TI ADS801 product information, the device is supplied in a 28-pin SOIC package and is designed for high-speed data acquisition and signal-processing systems.
What is the sampling rate of ADS801UG4?
The ADS801UG4 converts at up to 25 MSPS. The TI ADS801 family is specified as a 12-bit, 25 MSPS ADC with one input channel, a pipelined architecture, and single-ended or differential inputs. This throughput is suitable for communications, instrumentation, industrial measurement, and embedded waveform-processing systems.
What is the supply voltage range of ADS801UG4?
The ADS801UG4 operates from a 4.75 V to 5.25 V analog supply. The verified manufacturer and distributor specifications identify the device as a 12-bit, 25 MSPS ADC with single-ended or differential inputs and internal references. The supply range is one of the key parameters to check before replacing it in an existing circuit.
Where can I download the ADS801UG4 datasheet?
The official ADS801 family information is available from Texas Instruments at https://www.ti.com/product/ADS801, and the target ADS801UG4 datasheet is also referenced by the listed PDF resources. Use the manufacturer datasheet for the complete pin description, electrical limits, timing diagrams, reference configuration, and recommended application circuits.
Where can I find the ADS801UG4 pinout?
The ADS801UG4 pinout is defined in the manufacturer ADS801 datasheet and its 28-pin SOIC package drawing. The verified product information identifies the device as a 28-SOIC part with analog input, supply, reference, clock, control, and parallel output connections. Use the pin-description table when assigning PCB nets and checking exposed versus unused functions.
Can ADS801UG4 accept differential input?
Yes. The ADS801UG4 supports single-ended and differential input configurations, as stated in the TI ADS801 product description. Differential operation is useful when the source is balanced or when common-mode noise rejection is required, but the input network, common-mode voltage, settling time, and reference arrangement must be designed for the selected mode.
What is the difference between ADS801UG4 and ADS801U?
The verified comparison information identifies ADS801U and ADS801UG4 as having consistent terminal and package characteristics and states that replacement does not require modification of the existing circuit. The ordering suffix should still be checked against the required temperature grade, packaging, qualification, and procurement conditions before approving the substitution.
Is ADS801UG4 compatible with ADS800 and ADS802?
The TI product page states that ADS801 is pin compatible to ADS800 and ADS802. That compatibility is useful for evaluating family options, but it does not by itself prove that every electrical parameter, reference option, timing specification, or lifecycle condition is identical. Review each device's datasheet and operating requirements before using it as a replacement.
What is the best drop-in replacement for ADS801UG4?
ADS801U is the closest same-manufacturer candidate shown by the verified comparison data because it has consistent terminals and package characteristics and is described as directly replaceable without circuit modification. Because the ADS801UG4 is obsolete, confirm availability and the exact ordering requirements through the Request a Quote form on this page.
When should I choose ADS801UG4 over ADS800 or ADS802?
Choose ADS801UG4 when the design specifically requires the ADS801 family's 12-bit, 25 MSPS behavior and the existing board matches its 28-SOIC pin arrangement. Choose ADS800 or ADS802 only after checking the complete timing, input, reference, and supply specifications against the ADS801UG4 datasheet. Pin compatibility alone is not sufficient for a new design.
Is ADS801UG4 suitable for a high-speed data acquisition system?
Yes, the ADS801UG4 is suitable for many high-speed acquisition systems requiring 12-bit resolution and 25 MSPS conversion throughput. Its parallel interface reduces protocol overhead but requires careful routing of digital outputs. The analog front end must also provide adequate input bandwidth, settling performance, clock quality, and grounding.
How should I design the clock and input network for ADS801UG4?
Use low-jitter, clean clocking and place the ADC close to the driver so the analog input can settle before sampling. Route the clock and analog signals away from noisy digital return currents, use a continuous ground reference plane, and follow the manufacturer timing and layout recommendations. Validate the complete acquisition path rather than evaluating only nominal conversion speed.
What is the lifecycle status of ADS801UG4?
ADS801UG4 is reported as obsolete in the verified distributor product listing. Obsolete status means new designs should not be based on the part without a deliberate sourcing review. For repair, continuity, or legacy-product support, use the Request a Quote form to confirm available exact-MPN supply and lead time.
Where can I buy ADS801UG4 online and what is the price?
The current commercial status and price for ADS801UG4 should be requested through the Request a Quote form on this page, because the part is obsolete and no current qualifying quantity-break listing is available for extraction. Request the exact MPN, desired package form, quantity, and any required certification or traceability documentation.
What are the key specifications of ADS801UG4 that engineers should know?
The key ADS801UG4 specifications are 12-bit resolution, 25 MSPS conversion rate, one input channel, pipelined architecture, parallel output, single-ended or differential input, 4.75 V to 5.25 V supply, internal reference, and 28-pin SOIC packaging. These parameters determine sampling bandwidth, interface routing, analog conditioning, and replacement compatibility.

Technische Referenzdaten für ADS801UG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ADS801UG4 when maintaining an existing 28-SOIC design that depends on its 12-bit, 25 MSPS pipelined conversion, parallel output, and single-ended or differential input capability. Choose ADS801U when a verified same-family replacement is required and the comparison confirms consistent terminals and package characteristics. Consider ADS800 or ADS802 only when the TI pin-compatibility statement is sufficient and the complete datasheet confirms the required electrical, timing, reference, and temperature specifications. For a new design, prefer an active device unless legacy continuity is mandatory. If the ADS801UG4 is being used for repair or production continuity, verify the exact suffix, tube or reel packaging, traceability requirements, and lifecycle constraints before release.

Vergleich mit Alternativen

Parameter Dieses Produkt ADS801U ADS800 ADS802
Package 28-SOIC 28-SOIC 28-SOIC 28-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments

Wichtigste Unterscheidungsmerkmale

  • Direct same-family replacement path (vs. ADS801U)
  • TI-supported family compatibility (vs. ADS800)
  • Parallel-output architecture (vs. ADS802)

Designhinweise

Treat the ADS801UG4 clock as a high-quality signal. Route it over a continuous ground plane, minimize stubs and unnecessary vias, and isolate it from switching-node and high-current return paths. Use the manufacturer timing diagrams to verify setup and hold requirements at the receiving logic. If the source is distant, buffer the clock locally rather than allowing long PCB traces to radiate or pick up noise.

Place the ADC and its input-conditioning components close to the signal source, with short, impedance-controlled analog traces. Keep the parallel output bus orderly and provide a continuous reference plane beneath it. Separate analog and digital return currents where the architecture permits, and use local decoupling close to the supply pins. Check the package and pin assignments against the ADS801 datasheet before fabrication because the 28-SOIC footprint is not represented by a dedicated package drawing in this record.

Do not select a replacement from package appearance alone. Confirm input range, common-mode voltage, reference configuration, clock polarity, output timing, supply sequencing, and temperature grade in the manufacturer datasheet. The verified cross-reference information supports ADS801U compatibility and identifies ADS800 and ADS802 as pin-compatible family parts, but it does not establish identical specifications for every family member.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The verified product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact MPN.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ADS801UG4 datasheet ADS801UG4 pinout ADS801UG4 datasheet pdf ADS801UG4 equivalent ADS801UG4 replacement ADS801UG4 cross reference ADS801UG4 vs ADS801U ADS801UG4 vs ADS800 ADS801UG4 application circuit ADS801UG4 price ADS801UG4 stock Texas Instruments ADS801UG4

Verwandte Bauteile & Begriffe

Texas Instruments ADS801UG4 ADS801U ADS800 ADS802 Analog-to-digital converter ADC 12-bit resolution 25 MSPS pipelined ADC single-ended input differential input parallel digital output internal reference 28-SOIC SOIC package surface mount ADC/DAC Interface IC semiconductor data acquisition industrial measurement signal processing communications receiver digital oscilloscope
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen