Analog Devices

ADSP-21489KCPZ-4 - 400 MHz SHARC DSP | Analog Devices

MPN: ADSP-21489KCPZ-4 ✓ نشط
88-lead LFCSP, 12 x 12 mm Package 400 MHz Speed
الحد الأدنى للطلب: 1 |

ADSP-21489KCPZ-4 نظرة عامة

The Analog Devices ADSP-21489KCPZ-4 is a fourth-generation SHARC floating-point digital signal processor rated at 400 MHz, with up to 2700 MFLOPs of processing performance, and packaged in an 88-lead LFCSP measuring 12 x 12 mm. It combines high-throughput parallel processing with dedicated signal-processing hardware for demanding audio, communications, and industrial-control systems.

A SHARC processor is a digital signal processor whose architecture is optimized for repeated arithmetic on streaming data. In the product hierarchy, the ADSP-21489 belongs to the fourth-generation SHARC family of DSPs, which provide dedicated floating-point execution resources, efficient data movement, and programmable hardware suited to filtering, transforms, modulation, and real-time control. This processor serves as the central real-time compute engine rather than a general-purpose host controller.

The ADSP-21489 family supports performance levels up to 450 MHz and 2700 MFLOPs. The ADSP-21489KCPZ-4 operating designation identifies the 400 MHz grade in the 88-lead LFCSP package. Hardware-based filter accelerators support real-time audio and signal-processing workloads, while the SHARC programming model helps engineers organize fixed-point and floating-point algorithms for predictable execution.

Technical implementation requires attention to clocking, power sequencing, memory interfaces, and high-speed signal routing. The 88-lead landless fine-pitch CSP places approximately 0.5 mm pitch or finer features on a 12 x 12 mm body, so assembly, inspection, and PCB design require appropriate fine-pitch capabilities. The exposed thermal pad also makes board-level copper and heat dissipation important during sustained real-time workloads.

Typical applications include automotive audio, industrial motor and motion control, communications signal processing, professional audio, and test-and-measurement systems. In these systems, the processor can perform filtering, spectral analysis, audio decoding, and closed-loop control while deterministic execution timing supports predictable system behavior. An ADSP-21489 EZ-Lite evaluation board and the VisualDSP++ development environment are available for initial hardware and software evaluation.

When designing the PCB, preserve the pin assignment and exposed-pad connection specified by the manufacturer datasheet, provide clean power rails, and route high-speed signals with continuous reference planes. Use the manufacturer evaluation-board schematic and SHARC hardware reference as starting points for DDR memory, clock generation, external interfaces, and debug connectivity rather than attempting an unverified board-level adaptation.

This product page combines the confirmed processor grade, package, performance class, and application positioning with selection guidance, comparison criteria, and practical implementation notes. It also helps engineers distinguish genuine same-package family options from processors that may offer similar DSP functionality but require a different PCB footprint or software adaptation.

بدائل مباشرة لـ ADSP-21489KCPZ-4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

ADSP-21489KCPZ

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 88-lead LFCSP (12 x 12 mm)
Same 88-lead LFCSP footprint and ADSP-21489 family architecture, but the exact clock grade and associated timing, power, and throughput characteristics differ from the 400 MHz ADSP-21489KCPZ-4.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADSP-21489KCPZ-1

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 88-lead LFCSP (12 x 12 mm)
Same 88-lead LFCSP footprint and fourth-generation SHARC family, but the lower clock grade reduces available processing throughput and timing margin relative to the 400 MHz ADSP-21489KCPZ-4.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADSP-21489KCPZ-2

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 88-lead LFCSP (12 x 12 mm)
Same 88-lead LFCSP footprint and ADSP-21489 family architecture, but the lower clock grade provides less processing throughput than the 400 MHz ADSP-21489KCPZ-4 and may require deadline validation.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADSP-21489KCPZ-3

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 88-lead LFCSP (12 x 12 mm)
Same 88-lead LFCSP footprint and fourth-generation SHARC architecture, but the lower clock grade has less throughput and timing margin than the 400 MHz ADSP-21489KCPZ-4.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADSP-21489KCPZ-4 المواصفات

Processor Type Fourth-generation SHARC floating-point digital signal processor
Target Clock Frequency 400 MHz
Maximum Family Clock Frequency 450 MHz
Maximum Family Processing Performance 2700 MFLOPs
Instruction Set SHARC floating-point DSP architecture
العلبة 88-lead LFCSP, 12 x 12 mm
Lead Count 88 leads
Package Body Size 12 x 12 mm
نوع التركيب Surface mount
Targeted Applications Automotive audio and industrial control
Signal-Processing Hardware Hardware-based filter accelerators
Development Environment VisualDSP++
Evaluation Hardware EVAL-21489-EZLITE evaluation board
حالة RoHS Compliant

دليل تكوين أطراف ADSP-21489KCPZ-4 12 x 12 mm

تكوين الأطراف لـ ADSP-21489KCPZ-4 (حزمة 12 x 12 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 12 x 12 mm لـ ADSP-21489KCPZ-4

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADSP-21489KCPZ-4.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ADSP-21489KCPZ-4 مناسب لـ 6 التطبيقs: Automotive Audio Processing, Industrial Motion Control, Communications Signal Processing, Professional Audio Equipment, Test and Measurement Instruments, Audio and Industrial Control Hybrid.

🚗

Automotive Audio Processing

The ADSP-21489KCPZ-4 fits automotive audio systems that require deterministic real-time signal processing in a compact 88-lead LFCSP package. Its 400 MHz SHARC processing rate supports filtering, mixing, equalization, and other audio algorithms, while the family's hardware-based filter accelerators reduce the burden on general-purpose software. Place the processor beside the audio codec and route supported digital audio interfaces with controlled impedance. Validate clocking, power sequencing, ground return paths, and codec timing against the manufacturer hardware reference. Performance should be checked at the system's full sample rate, channel count, and processing latency target.

🏭

Industrial Motion Control

The ADSP-21489KCPZ-4 is appropriate for industrial motion-control and condition-monitoring designs that combine deterministic control calculations with real-time signal analysis. At 400 MHz, the SHARC DSP can execute filters, transforms, and control loops while hardware-based filter accelerators support common acquisition-path workloads. Place the device near the power-conversion and sensing circuitry to minimize analog-signal routing, while keeping switching nodes away from high-impedance inputs. The design should define task deadlines, peripheral interrupt latency, and thermal limits before choosing clock and memory settings. Prototype behavior on the EVAL-21489-EZLITE platform before integrating the fine-pitch production package.

🌐

Communications Signal Processing

The ADSP-21489KCPZ-4 can serve as the real-time processing engine in communications equipment requiring floating-point filtering, modulation, demodulation, or spectral analysis. Its 400 MHz SHARC architecture provides a stronger throughput margin than lower clock grades of the same family, which is valuable when the processor must handle multiple channels concurrently. Use the manufacturer DDR memory and external-interface layouts as the basis for high-speed routing, maintain continuous reference planes beneath critical links, and isolate switching supplies from sensitive clock and data nets. Validate worst-case latency and interrupt service time with the full production memory configuration rather than only code operating from internal memory.

🎧

Professional Audio Equipment

The ADSP-21489KCPZ-4 suits professional audio products that combine multichannel sampling, digital filtering, equalization, and low-latency effects. The 400 MHz SHARC processor can organize real-time audio work while the family's hardware-based filter accelerators accelerate suitable filter configurations. Place the DSP close to the audio converter and use continuous ground and reference planes to reduce data-clock jitter and analog coupling. Confirm converter interface timing, supported sample rates, and DMA behavior in the manufacturer hardware reference. Use the EVAL-21489-EZLITE board and VisualDSP++ tools to establish latency and audio-throughput baselines before compacting the design into the 12 x 12 mm LFCSP footprint.

🔧

Test and Measurement Instruments

The ADSP-21489KCPZ-4 is well matched to test-and-measurement instruments that perform real-time filtering, waveform analysis, modulation detection, or adaptive signal processing. Its 400 MHz SHARC execution rate provides additional timing margin for concurrent acquisition and analysis tasks, while the hardware-based filter accelerators can improve throughput for common filter workloads. Keep the processor, memory, and data converters on a controlled multilayer board so clock jitter and return-path discontinuities do not degrade measurement accuracy. Establish acquisition latency, sample-buffer depth, and interrupt deadlines during prototype testing. Use the VisualDSP++ compiler, assembler, linker, and debugging environment to profile each real-time task before production optimization.

🖥️

Audio and Industrial Control Hybrid

The ADSP-21489KCPZ-4 can combine audio processing and industrial control when a system must respond to both real-time signals and machine events. The fourth-generation SHARC architecture supports deterministic floating-point computation, and the 400 MHz grade provides more execution margin than lower speed variants. Partition the software into bounded audio and control tasks, then verify the worst-case scheduling latency under both workloads. Route control inputs away from switching power stages and audio codec signals, and provide local decoupling at the LFCSP power pins. The exposed thermal pad should connect to a properly designed copper area, with thermal performance evaluated under sustained maximum processing load rather than idle benchmarks.

ملخص المنتجات الموصى بها

ADSP-21489KCPZ-4 Analog Devices يُستخدم في: Automotive Audio Processing, Industrial Motion Control, Communications Signal Processing, Professional Audio Equipment, Test and Measurement Instruments, Audio and Industrial Control Hybrid EVAL-21489-EZLITE Processor evaluation platform يُستخدم في: Automotive Audio Processing, Industrial Motion Control, Professional Audio Equipment, Test and Measurement Instruments ADSP-21489KCPZ-3 Same-package reduced-throughput family option يُستخدم في: Communications Signal Processing, Audio and Industrial Control Hybrid
What is the ADSP-21489KCPZ-4?
The ADSP-21489KCPZ-4 is an Analog Devices fourth-generation SHARC floating-point digital signal processor operating at 400 MHz in an 88-lead LFCSP package. According to the Analog Devices product page, the ADSP-21489 family reaches up to 450 MHz and 2700 MFLOPs and includes hardware-based filter accelerators. It is intended for real-time audio, communications, and industrial-control workloads.
What are the key specifications of ADSP-21489KCPZ-4 that engineers should know?
The ADSP-21489KCPZ-4 combines a 400 MHz clock with fourth-generation SHARC floating-point processing in an 88-lead, 12 x 12 mm LFCSP package. The manufacturer identifies the broader ADSP-21489 family as delivering up to 450 MHz and 2700 MFLOPs, with hardware-based filter accelerators for demanding real-time workloads. Its principal application areas include automotive audio and industrial control.
Where can I download the ADSP-21489KCPZ-4 datasheet PDF?
The official ADSP-21489 product page provides the manufacturer datasheet and supporting technical documentation for the ADSP-21489KCPZ-4. The device uses the ADSP-21489 family data sheet rather than a separate document for each package suffix. Use the package drawing, pin-description table, electrical characteristics, and ordering information in that document for final PCB and qualification decisions.
Where can I find the ADSP-21489KCPZ-4 pinout?
The ADSP-21489KCPZ-4 pinout is defined in the pin-description and package-drawing sections of the Analog Devices ADSP-21489 datasheet. The device uses an 88-lead LFCSP with a nominal 12 x 12 mm body and an exposed thermal pad. Assign PCB nets directly from the manufacturer pin table rather than relying on generic package drawings, because exposed-pad and interface assignments are device-specific.
Is the ADSP-21489KCPZ-4 suitable for automotive audio?
Yes, the ADSP-21489 family is specifically identified by Analog Devices as well suited to automotive audio and industrial control. The 400 MHz SHARC grade provides deterministic real-time computation, while hardware-based filter accelerators help offload common audio-processing tasks. Final automotive use still requires checking the exact temperature grade, qualification status, and AEC-Q100 documentation for the ordered suffix.
Where can I buy ADSP-21489KCPZ-4 online?
The ADSP-21489KCPZ-4 can be requested through the Request a Quote form on this page, where quantity, availability, and delivery requirements can be reviewed with XAIPART. The exact 400 MHz, 88-lead LFCSP ordering suffix should be stated on the request. Use the manufacturer ordering table to confirm that the complete MPN and package variant are correct before release.
What is the price of ADSP-21489KCPZ-4?
The current unit price for ADSP-21489KCPZ-4 should be obtained through the Request a Quote form on this page because commercial terms can depend on quantity, supply status, and order configuration. Submit the exact MPN and required quantity. The request process avoids presenting a stale figure that may not correspond to the available package and delivery terms.
What is the lead time for ADSP-21489KCPZ-4?
The current production and delivery lead time should be confirmed through the Request a Quote form on this page. Lead time depends on the exact ordering suffix, requested quantity, and current factory allocation. Include the target ship date and any programming, testing, or inspection requirements in the request so the complete delivery scope can be confirmed.
Is ADSP-21489KCPZ-4 in stock?
Current availability for ADSP-21489KCPZ-4 should be checked through the Request a Quote form on this page. The request identifies the exact 400 MHz, 88-lead LFCSP device and the quantity required, allowing availability and scheduled delivery to be confirmed together. Avoid substituting a different speed grade or package suffix without checking its electrical and pin compatibility.
What is the best drop-in replacement for ADSP-21489KCPZ-4?
The closest drop-in choices are other speed-grade suffixes of the ADSP-21489KCPZ family because they retain the 88-lead LFCSP footprint. The ADSP-21489KCPZ, ADSP-21489KCPZ-1, ADSP-21489KCPZ-2, and ADSP-21489KCPZ-3 preserve package compatibility, but their operating clock, timing, power, and thermal margins differ from the 400 MHz ADSP-21489KCPZ-4. Validate timing and throughput before substitution.
Can ADSP-21489KCPZ-3 replace ADSP-21489KCPZ-4?
The ADSP-21489KCPZ-3 can be used as a footprint-compatible option in some designs, but it is not an equivalent-performance substitute for the 400 MHz ADSP-21489KCPZ-4. Its lower clock grade can change execution time, peripheral timing margins, power consumption, and whether an algorithm meets its real-time deadline. Confirm the complete electrical specification and timing budget before using it as a drop-in replacement.
When should I choose ADSP-21489KCPZ-4 over ADSP-21489KCPZ-3?
Choose the ADSP-21489KCPZ-4 when the design requires the 400 MHz grade or depends on the additional throughput available relative to the ADSP-21489KCPZ-3. This can reduce algorithm execution time or provide more timing margin for peripheral transfers and interrupts. The lower-speed grade may be suitable only when its measured execution time satisfies the real-time budget with adequate margin.
What is the difference between ADSP-21489KCPZ-4 and ADSP-21489KCPZ-2?
Both parts belong to the ADSP-21489KCPZ family and use the same 88-lead LFCSP package, but their speed grades differ. The ADSP-21489KCPZ-4 is the 400 MHz grade, while the ADSP-21489KCPZ-2 is a lower-clock option. That difference affects processing throughput, timing margin, and potentially power dissipation, so pin compatibility alone does not establish functional equivalence.
Is ADSP-21489KCPZ-4 suitable for industrial control?
The ADSP-21489KCPZ-4 is suitable for many industrial-control systems because the manufacturer identifies industrial control as a target segment. Its 400 MHz SHARC architecture supports real-time filtering, transforms, and control calculations, while hardware-based filter accelerators assist common signal-processing tasks. Check operating-temperature limits, external interface requirements, and long-term availability for the deployed environment.
What development tools are available for ADSP-21489KCPZ-4?
Analog Devices provides the EVAL-21489-EZLITE evaluation board together with an evaluation suite for the VisualDSP++ development and debugging environment, including C/C++ compiler, assembler, and linker tools. The manufacturer also publishes an ADSP-214xx SHARC Processor Hardware Reference. These resources support initial bring-up, register-level troubleshooting, and algorithm development.

بيانات مرجعية هندسية لـ ADSP-21489KCPZ-4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ADSP-21489KCPZ-4 when the design needs the defined 400 MHz grade of the fourth-generation SHARC ADSP-21489 family and must fit an 88-lead, 12 x 12 mm LFCSP board. It is especially suitable for automotive audio, industrial control, communications processing, professional audio, and real-time test equipment. The ADSP-21489KCPZ-3 is appropriate when its lower clock rate still satisfies every task deadline and the design needs lower-clock family flexibility. Consider ADSP-21489KCPZ-2 only after measuring throughput and interrupt latency, because the reduced processing rate can materially change real-time margins. ADSP-21489KCPZ-1 is the most constrained option and should be selected only for workloads whose worst-case execution time is comfortably within the available budget. For all options, confirm the exact clock grade, electrical characteristics, operating temperature, thermal design, DDR implementation, and exposed-pad layout against the manufacturer datasheet before releasing a production BOM.

المقارنة مع البدائل

المعامل هذا المنتج ADSP-21489KCPZ ADSP-21489KCPZ-1 ADSP-21489KCPZ-2 ADSP-21489KCPZ-3
Package 88-lead LFCSP (12 x 12 mm) 88-lead LFCSP (12 x 12 mm) 88-lead LFCSP (12 x 12 mm) 88-lead LFCSP (12 x 12 mm) 88-lead LFCSP (12 x 12 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Processor Family Fourth-generation ADSP-21489 SHARC Fourth-generation ADSP-21489 SHARC Fourth-generation ADSP-21489 SHARC Fourth-generation ADSP-21489 SHARC Fourth-generation ADSP-21489 SHARC
Architecture SHARC floating-point digital signal processor SHARC floating-point digital signal processor SHARC floating-point digital signal processor SHARC floating-point digital signal processor SHARC floating-point digital signal processor
Target Applications Automotive audio and industrial control Automotive audio and industrial control Automotive audio and industrial control Automotive audio and industrial control Automotive audio and industrial control
Development Tool Support VisualDSP++ and EVAL-21489-EZLITE ADSP-21489 family tool support ADSP-21489 family tool support ADSP-21489 family tool support ADSP-21489 family tool support
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

أبرز الفروقات

  • Higher clock grade within the same family and footprint (مقابلADSP-21489KCPZ-3)
  • Direct fit for existing 88-lead LFCSP ADSP-21489 boards (مقابلADSP-21489KCPZ-2)
  • Dedicated hardware assists real-time filtering (مقابلADSP-21489KCPZ-1)
  • Purpose-built processing rather than general-purpose control (مقابلADSP-21489KCPZ)

ملاحظات التصميم

Base the PCB layout on the Analog Devices evaluation-board schematic and the ADSP-214xx SHARC Processor Hardware Reference. Preserve the exact 88-lead LFCSP pad geometry, exposed-pad connection, decoupling locations, DDR routing, and external-interface topology. Because the package has no dedicated 88-lead CSP entry in the package-diagram library, use the manufacturer package drawing as the physical source of truth rather than relying on a generic diagram.

Route clocks, memory interfaces, and other high-speed signals over continuous reference planes with short return paths. Avoid plane splits beneath active signal routes, and place decoupling capacitors close to their associated device pins according to the manufacturer reference design. Keep switching-power and motor-drive nodes away from sensitive inputs to reduce differential and common-mode coupling into the DSP and its external interfaces.

Treat the exposed thermal pad as both an electrical and thermal feature. Follow the datasheet requirement for connecting it to the appropriate ground or power plane and provide as much uninterrupted copper as the board stack-up permits. Validate junction temperature under the worst sustained DSP workload, including maximum clock activity and simultaneous memory traffic; idle-case temperature does not represent real-time processing conditions.

Do not assume that a lower-speed ADSP-21489KCPZ suffix is automatically performance-equivalent to the 400 MHz ADSP-21489KCPZ-4. Measure every real-time task, interrupt latency, and data-transfer deadline after changing the clock grade. A footprint-compatible substitution can still fail an audio, communications, or control deadline if the additional throughput is required for schedule margin.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS compliance is indicated by the product listing. AEC-Q100 qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation for the exact ordering suffix and current manufacturer documentation.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ADSP-21489KCPZ-4 ADSP-21489KCPZ-4 datasheet ADSP-21489KCPZ-4 pinout ADSP-21489KCPZ-4 datasheet pdf ADSP-21489KCPZ-4 price ADSP-21489KCPZ-4 stock ADSP-21489KCPZ-4 equivalent ADSP-21489KCPZ-4 replacement ADSP-21489KCPZ-4 vs ADSP-21489KCPZ-3 ADSP-21489KCPZ-4 footprint Analog Devices ADSP-21489KCPZ-4 ADSP-21489 automotive audio DSP ADSP-21489KCPZ-4 application circuit 88-lead LFCSP SHARC processor 400 MHz floating point DSP

المكونات والمصطلحات ذات الصلة

Analog Devices ADSP-21489KCPZ-4 ADSP-21489 ADSP-21489KCPZ ADSP-21489KCPZ-1 ADSP-21489KCPZ-2 ADSP-21489KCPZ-3 SHARC Processor Digital Signal Processor DSP floating-point processor fourth-generation SHARC 400 MHz 2700 MFLOPs 88-lead LFCSP 12 x 12 mm LFCSP QFN family surface-mount package hardware-based filter accelerator automotive audio industrial control professional audio communications signal processing VisualDSP++ EVAL-21489-EZLITE
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر