ADSP-21489KCPZ-4 - 400 MHz SHARC DSP | Analog Devices
MPN: ADSP-21489KCPZ-4 ✓ सक्रियADSP-21489KCPZ-4 अवलोकन
A SHARC processor is a digital signal processor whose architecture is optimized for repeated arithmetic on streaming data. In the product hierarchy, the ADSP-21489 belongs to the fourth-generation SHARC family of DSPs, which provide dedicated floating-point execution resources, efficient data movement, and programmable hardware suited to filtering, transforms, modulation, and real-time control. This processor serves as the central real-time compute engine rather than a general-purpose host controller.
The ADSP-21489 family supports performance levels up to 450 MHz and 2700 MFLOPs. The ADSP-21489KCPZ-4 operating designation identifies the 400 MHz grade in the 88-lead LFCSP package. Hardware-based filter accelerators support real-time audio and signal-processing workloads, while the SHARC programming model helps engineers organize fixed-point and floating-point algorithms for predictable execution.
Technical implementation requires attention to clocking, power sequencing, memory interfaces, and high-speed signal routing. The 88-lead landless fine-pitch CSP places approximately 0.5 mm pitch or finer features on a 12 x 12 mm body, so assembly, inspection, and PCB design require appropriate fine-pitch capabilities. The exposed thermal pad also makes board-level copper and heat dissipation important during sustained real-time workloads.
Typical applications include automotive audio, industrial motor and motion control, communications signal processing, professional audio, and test-and-measurement systems. In these systems, the processor can perform filtering, spectral analysis, audio decoding, and closed-loop control while deterministic execution timing supports predictable system behavior. An ADSP-21489 EZ-Lite evaluation board and the VisualDSP++ development environment are available for initial hardware and software evaluation.
When designing the PCB, preserve the pin assignment and exposed-pad connection specified by the manufacturer datasheet, provide clean power rails, and route high-speed signals with continuous reference planes. Use the manufacturer evaluation-board schematic and SHARC hardware reference as starting points for DDR memory, clock generation, external interfaces, and debug connectivity rather than attempting an unverified board-level adaptation.
This product page combines the confirmed processor grade, package, performance class, and application positioning with selection guidance, comparison criteria, and practical implementation notes. It also helps engineers distinguish genuine same-package family options from processors that may offer similar DSP functionality but require a different PCB footprint or software adaptation.
के लिए ड्रॉप-इन विकल्प ADSP-21489KCPZ-4 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
ADSP-21489KCPZ
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADSP-21489KCPZ-1
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADSP-21489KCPZ-2
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADSP-21489KCPZ-3
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADSP-21489KCPZ-4 विशेषताएं
| Processor Type | Fourth-generation SHARC floating-point digital signal processor |
| Target Clock Frequency | 400 MHz |
| Maximum Family Clock Frequency | 450 MHz |
| Maximum Family Processing Performance | 2700 MFLOPs |
| Instruction Set | SHARC floating-point DSP architecture |
| पैकेज | 88-lead LFCSP, 12 x 12 mm |
| Lead Count | 88 leads |
| Package Body Size | 12 x 12 mm |
| माउंटिंग प्रकार | Surface mount |
| Targeted Applications | Automotive audio and industrial control |
| Signal-Processing Hardware | Hardware-based filter accelerators |
| Development Environment | VisualDSP++ |
| Evaluation Hardware | EVAL-21489-EZLITE evaluation board |
| RoHS स्थिति | Compliant |
ADSP-21489KCPZ-4 12 x 12 mm पिन कॉन्फ़िगरेशन गाइड
ADSP-21489KCPZ-4 (12 x 12 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADSP-21489KCPZ-4.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ADSP-21489KCPZ-4 के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Audio Processing, Industrial Motion Control, Communications Signal Processing, Professional Audio Equipment, Test and Measurement Instruments, Audio and Industrial Control Hybrid.
Automotive Audio Processing
The ADSP-21489KCPZ-4 fits automotive audio systems that require deterministic real-time signal processing in a compact 88-lead LFCSP package. Its 400 MHz SHARC processing rate supports filtering, mixing, equalization, and other audio algorithms, while the family's hardware-based filter accelerators reduce the burden on general-purpose software. Place the processor beside the audio codec and route supported digital audio interfaces with controlled impedance. Validate clocking, power sequencing, ground return paths, and codec timing against the manufacturer hardware reference. Performance should be checked at the system's full sample rate, channel count, and processing latency target.
अनुशंसित
Industrial Motion Control
The ADSP-21489KCPZ-4 is appropriate for industrial motion-control and condition-monitoring designs that combine deterministic control calculations with real-time signal analysis. At 400 MHz, the SHARC DSP can execute filters, transforms, and control loops while hardware-based filter accelerators support common acquisition-path workloads. Place the device near the power-conversion and sensing circuitry to minimize analog-signal routing, while keeping switching nodes away from high-impedance inputs. The design should define task deadlines, peripheral interrupt latency, and thermal limits before choosing clock and memory settings. Prototype behavior on the EVAL-21489-EZLITE platform before integrating the fine-pitch production package.
अनुशंसित
Communications Signal Processing
The ADSP-21489KCPZ-4 can serve as the real-time processing engine in communications equipment requiring floating-point filtering, modulation, demodulation, or spectral analysis. Its 400 MHz SHARC architecture provides a stronger throughput margin than lower clock grades of the same family, which is valuable when the processor must handle multiple channels concurrently. Use the manufacturer DDR memory and external-interface layouts as the basis for high-speed routing, maintain continuous reference planes beneath critical links, and isolate switching supplies from sensitive clock and data nets. Validate worst-case latency and interrupt service time with the full production memory configuration rather than only code operating from internal memory.
अनुशंसित
Professional Audio Equipment
The ADSP-21489KCPZ-4 suits professional audio products that combine multichannel sampling, digital filtering, equalization, and low-latency effects. The 400 MHz SHARC processor can organize real-time audio work while the family's hardware-based filter accelerators accelerate suitable filter configurations. Place the DSP close to the audio converter and use continuous ground and reference planes to reduce data-clock jitter and analog coupling. Confirm converter interface timing, supported sample rates, and DMA behavior in the manufacturer hardware reference. Use the EVAL-21489-EZLITE board and VisualDSP++ tools to establish latency and audio-throughput baselines before compacting the design into the 12 x 12 mm LFCSP footprint.
अनुशंसित
Test and Measurement Instruments
The ADSP-21489KCPZ-4 is well matched to test-and-measurement instruments that perform real-time filtering, waveform analysis, modulation detection, or adaptive signal processing. Its 400 MHz SHARC execution rate provides additional timing margin for concurrent acquisition and analysis tasks, while the hardware-based filter accelerators can improve throughput for common filter workloads. Keep the processor, memory, and data converters on a controlled multilayer board so clock jitter and return-path discontinuities do not degrade measurement accuracy. Establish acquisition latency, sample-buffer depth, and interrupt deadlines during prototype testing. Use the VisualDSP++ compiler, assembler, linker, and debugging environment to profile each real-time task before production optimization.
अनुशंसित
Audio and Industrial Control Hybrid
The ADSP-21489KCPZ-4 can combine audio processing and industrial control when a system must respond to both real-time signals and machine events. The fourth-generation SHARC architecture supports deterministic floating-point computation, and the 400 MHz grade provides more execution margin than lower speed variants. Partition the software into bounded audio and control tasks, then verify the worst-case scheduling latency under both workloads. Route control inputs away from switching power stages and audio codec signals, and provide local decoupling at the LFCSP power pins. The exposed thermal pad should connect to a properly designed copper area, with thermal performance evaluated under sustained maximum processing load rather than idle benchmarks.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ADSP-21489KCPZ-4 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ADSP-21489KCPZ | ADSP-21489KCPZ-1 | ADSP-21489KCPZ-2 | ADSP-21489KCPZ-3 |
|---|---|---|---|---|---|
| Package | 88-lead LFCSP (12 x 12 mm) | 88-lead LFCSP (12 x 12 mm) | 88-lead LFCSP (12 x 12 mm) | 88-lead LFCSP (12 x 12 mm) | 88-lead LFCSP (12 x 12 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Processor Family | Fourth-generation ADSP-21489 SHARC | Fourth-generation ADSP-21489 SHARC | Fourth-generation ADSP-21489 SHARC | Fourth-generation ADSP-21489 SHARC | Fourth-generation ADSP-21489 SHARC |
| Architecture | SHARC floating-point digital signal processor | SHARC floating-point digital signal processor | SHARC floating-point digital signal processor | SHARC floating-point digital signal processor | SHARC floating-point digital signal processor |
| Target Applications | Automotive audio and industrial control | Automotive audio and industrial control | Automotive audio and industrial control | Automotive audio and industrial control | Automotive audio and industrial control |
| Development Tool Support | VisualDSP++ and EVAL-21489-EZLITE | ADSP-21489 family tool support | ADSP-21489 family tool support | ADSP-21489 family tool support | ADSP-21489 family tool support |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
मुख्य विशेषताएँ
- Higher clock grade within the same family and footprint (बनामADSP-21489KCPZ-3)
- Direct fit for existing 88-lead LFCSP ADSP-21489 boards (बनामADSP-21489KCPZ-2)
- Dedicated hardware assists real-time filtering (बनामADSP-21489KCPZ-1)
- Purpose-built processing rather than general-purpose control (बनामADSP-21489KCPZ)
डिज़ाइन नोट्स
Base the PCB layout on the Analog Devices evaluation-board schematic and the ADSP-214xx SHARC Processor Hardware Reference. Preserve the exact 88-lead LFCSP pad geometry, exposed-pad connection, decoupling locations, DDR routing, and external-interface topology. Because the package has no dedicated 88-lead CSP entry in the package-diagram library, use the manufacturer package drawing as the physical source of truth rather than relying on a generic diagram.
Route clocks, memory interfaces, and other high-speed signals over continuous reference planes with short return paths. Avoid plane splits beneath active signal routes, and place decoupling capacitors close to their associated device pins according to the manufacturer reference design. Keep switching-power and motor-drive nodes away from sensitive inputs to reduce differential and common-mode coupling into the DSP and its external interfaces.
Treat the exposed thermal pad as both an electrical and thermal feature. Follow the datasheet requirement for connecting it to the appropriate ground or power plane and provide as much uninterrupted copper as the board stack-up permits. Validate junction temperature under the worst sustained DSP workload, including maximum clock activity and simultaneous memory traffic; idle-case temperature does not represent real-time processing conditions.
Do not assume that a lower-speed ADSP-21489KCPZ suffix is automatically performance-equivalent to the 400 MHz ADSP-21489KCPZ-4. Measure every real-time task, interrupt latency, and data-transfer deadline after changing the clock grade. A footprint-compatible substitution can still fail an audio, communications, or control deadline if the additional throughput is required for schedule margin.
अनुपालन जानकारी
RoHS compliance is indicated by the product listing. AEC-Q100 qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation for the exact ordering suffix and current manufacturer documentation.