ADSP-2173BST-80 - 10 MHz 24-Bit DSP | Analog Devices
MPN: ADSP-2173BST-80 ✓ نشطADSP-2173BST-80 نظرة عامة
A digital signal processor is a semiconductor designed to execute repetitive numerical operations efficiently. In the product hierarchy, the ADSP-2173BST-80 is a DSP, also classified as a digital signal-processing integrated circuit and an embedded processor. Unlike a general-purpose microcontroller, a DSP is optimized for multiply-accumulate operations, sampling-rate conversion, filtering, and other mathematically intensive workloads. The 24-bit external data bus gives the processor a broad interface for exchanging sampled data with converters, memory, and other digital subsystems.
The headline operating characteristics are a 10 MHz maximum clock frequency, 24-bit external data-bus width, and 3.30 V core and I/O voltage. The fixed-point architecture supports efficient implementation of filters, waveform-generation routines, and control algorithms in industrial equipment. Its industrial temperature rating spans -40°C to +85°C, allowing operation across factory, communications, test, and embedded-control environments where commercial-temperature components would be unsuitable.
The ADSP-2173BST-80 uses 128 gull-wing terminals in an LFQFP/TQFP package. The package provides a practical mix of processor, memory, control, and external-bus connections while remaining compatible with conventional multilayer PCB assembly. Because DSP performance depends on code timing, peripheral configuration, and external memory behavior, designers should consult the manufacturer pin-description table and reference design before assigning signals or laying out the board.
Typical uses include industrial signal-processing modules, digital filtering subsystems, communications interface equipment, embedded audio control, and data-acquisition systems. In each case, the 24-bit bus and fixed-point computational model help structure real-time processing between external data converters and system logic. The exact arithmetic throughput, memory organization, peripheral set, and electrical limits should be taken directly from the Analog Devices datasheet before a circuit is released for production.
A principal design consideration is that a 10 MHz clock does not by itself determine application performance. Instruction availability, memory access cycles, DMA behavior, peripheral configuration, and interrupt structure determine realized throughput. Designers should preserve short, deterministic signal paths and follow the reference schematic for decoupling and clock implementation. Firmware should also identify invalid operating states and use the processor's documented reset and clock sequencing procedures.
This product page organizes the identified electrical, timing, packaging, temperature, and commercial information while separating verified facts from parameters that still require confirmation. It also identifies the absence of a confirmed drop-in substitute list, preventing a similarly packaged processor from being presented as a safe replacement without pin-level and software compatibility checks.
بدائل مباشرة لـ ADSP-2173BST-80 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلADSP-2173BST-80 المواصفات
| Device Type | Fixed-point digital signal processor |
| أقصى تردد للساعة | 10 MHz |
| External Data Bus Width | 24 bit |
| Core Supply Voltage | 3.30 V |
| I/O Supply Voltage | 3.30 V |
| نطاق درجة حرارة التشغيل | -40°C to +85°C |
| Temperature Grade | Industrial |
| Number of Terminals | 128 terminals |
| Package Code | LFQFP |
| Package Type | 128-TQFP, gull wing |
| Package Dimensions | 14 mm x 20 mm |
| نوع التركيب | Surface mount |
| Architecture | Fixed point |
دليل تكوين أطراف ADSP-2173BST-80 14 mm x 20 mm
تكوين الأطراف لـ ADSP-2173BST-80 (حزمة 14 mm x 20 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ADSP-2173BST-80.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ADSP-2173BST-80 مناسب لـ 6 التطبيقs: Industrial Digital Filtering, Data-Acquisition Signal Conditioning, Embedded Audio Processing, Communications Interface Equipment, Industrial Control Module, Test and Measurement Front End.
Industrial Digital Filtering
The ADSP-2173BST-80 is appropriate for fixed-point filtering modules that must process sampled signals under deterministic control. Its 10 MHz maximum clock and 24-bit external data-bus width provide the basic computational and data-movement resources for common filter implementations. The processor's -40°C to +85°C industrial range supports use in factory equipment where ambient temperatures vary. Engineers should allocate sufficient memory and DMA support for the chosen filter topology, then verify latency and throughput against the system sample rate.
موصى به
Data-Acquisition Signal Conditioning
The ADSP-2173BST-80 can serve as the processing core of an industrial data-acquisition module by applying correction, filtering, and scaling to converter data. Its 24-bit external data bus provides a wide path for transferring sampled information, while the fixed-point architecture supports efficient arithmetic in embedded implementations. System designers should align input word length and sample timing across the converter interface, avoid unnecessary bus contention, and test the complete acquisition path for latency and channel-to-channel consistency.
موصى به
Embedded Audio Processing
The ADSP-2173BST-80 fits embedded audio modules requiring real-time filtering, mixing, or control in a fixed-point environment. Its 10 MHz clock supports the stated processor operating point, while the 24-bit bus can accommodate high-resolution audio data transfers when the surrounding converter and memory architecture are designed accordingly. Engineers must verify supported audio-clock functions, required filter throughput, codec format, and buffer latency. Firmware should include overload handling to prevent clipping or unstable output during unexpected input levels.
موصى به
Communications Interface Equipment
The ADSP-2173BST-80 can be used in communications-oriented equipment for signal shaping, control-loop computation, or protocol-adjacent processing. The 24-bit external data bus supports connections to conversion and interface circuitry, while the fixed-point architecture allows efficient handling of sampled data. Product qualification must include exact clocking, jitter tolerance, latency, and interface timing because those characteristics determine suitability for communications links. Use the Analog Devices reference design and pin-description table as the basis for board-level implementation.
موصى به
Industrial Control Module
The ADSP-2173BST-80 is suitable for control modules that combine sampled feedback with real-time computation. Its fixed-point DSP model supports responsive filtering and control routines, and its industrial temperature range of -40°C to +85°C suits equipment operating beyond commercial-temperature limits. The implementation should define worst-case execution time for the control loop, reserve deterministic memory paths, and use the manufacturer power and clock procedures. External interface timing and safety behavior must be verified independently of the DSP arithmetic.
موصى به
Test and Measurement Front End
The ADSP-2173BST-80 can support embedded measurement front ends that perform real-time digital filtering, calibration, or signal correction. Its 24-bit external data-bus width is useful for transferring high-resolution samples from external converters, while the 10 MHz clock provides the timing reference for the processor. For laboratory-grade instruments, validate clock jitter, analog-to-digital interface synchronization, calibration stability, and data latency. The compact 128-terminal TQFP package also supports integration into multi-channel measurement equipment.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ADSP-2173BST-80 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Manufacturer | Analog Devices |
| Package | 128-terminal LFQFP/TQFP, 14 mm x 20 mm |
| Processor Type | Fixed-point digital signal processor |
| Maximum Clock Frequency | 10 MHz |
| External Data Bus Width | 24 bit |
| Core Supply Voltage | 3.30 V |
| I/O Supply Voltage | 3.30 V |
| Operating Temperature Range | -40°C to +85°C |
| Temperature Grade | Industrial |
| Terminal Count | 128 terminals |
أبرز الفروقات
- Purpose-built fixed-point DSP performance (مقابلGeneral-purpose microcontrollers)
- Industrial temperature capability (مقابلCommercial-temperature DSP alternatives)
- High-resolution external data path (مقابلNarrower external bus processors)
ملاحظات التصميم
Do not treat another 128-pin DSP as a drop-in replacement merely because both devices use an LFQFP outline. Pin names, power rails, clock inputs, peripheral assignments, memory interfaces, and voltage tolerances must match the ADSP-2173BST-80 exactly. Preserve the processor's documented reset and clock-sequencing sequence, and review all no-connect and reserved terminals in the Analog Devices pin-description table before routing the PCB.
Place power-decoupling capacitors at the relevant 3.30 V supply pins using the topology and values specified in the manufacturer reference design. Keep the clock path compact and return it through an adjacent ground reference, while isolating high-current switching nodes from sensitive signal routes. The 128-terminal package requires careful fan-out planning so power, ground, processor, and external-bus connections can reach their assigned pins without long loops or difficult fan-in structures.
Use the external data-bus topology and timing constraints from the Analog Devices datasheet when connecting converters, memory, or other bus devices. Account for setup and hold timing, output loading, bus direction changes, and any required termination. The 24-bit bus width increases routing complexity on a 128-terminal package, so validate signal integrity across temperature and supply corners rather than relying only on nominal simulation results.
Estimate processor power dissipation from the selected core and I/O currents and the actual supply voltages, then compare the resulting junction-temperature estimate with the device's allowed operating range. Use the manufacturer thermal information for package-dependent calculations and provide copper area or additional thermal spreading where required. Industrial operation across -40°C to +85°C increases the need to check cold-start behavior and worst-case ambient conditions.
معلومات الامتثال
The identified operating range is industrial, but no specific AEC-Q100 qualification, RoHS declaration, REACH declaration, lead-free statement, halogen-free statement, or conflict-minerals declaration was identified for this exact orderable MPN.