Analog Devices

ADSP-2173BST-80 - 10 MHz 24-Bit DSP | Analog Devices

MPN: ADSP-2173BST-80 ✓ Aktif
3.30 V Vdss LFQFP Package 10 MHz Speed
MOQ: 1 |

ADSP-2173BST-80 Ringkasan

The Analog Devices ADSP-2173BST-80 is a fixed-point digital signal processor with a 10 MHz maximum clock frequency, a 24-bit external data bus, and 128 terminals in an industrial-temperature TQFP-128 package measuring 14 mm by 20 mm. The device operates with 3.30 V core and I/O supplies, providing a compact processor platform for real-time filtering, signal conditioning, control, and embedded audio-processing designs.

A digital signal processor is a semiconductor designed to execute repetitive numerical operations efficiently. In the product hierarchy, the ADSP-2173BST-80 is a DSP, also classified as a digital signal-processing integrated circuit and an embedded processor. Unlike a general-purpose microcontroller, a DSP is optimized for multiply-accumulate operations, sampling-rate conversion, filtering, and other mathematically intensive workloads. The 24-bit external data bus gives the processor a broad interface for exchanging sampled data with converters, memory, and other digital subsystems.

The headline operating characteristics are a 10 MHz maximum clock frequency, 24-bit external data-bus width, and 3.30 V core and I/O voltage. The fixed-point architecture supports efficient implementation of filters, waveform-generation routines, and control algorithms in industrial equipment. Its industrial temperature rating spans -40°C to +85°C, allowing operation across factory, communications, test, and embedded-control environments where commercial-temperature components would be unsuitable.

The ADSP-2173BST-80 uses 128 gull-wing terminals in an LFQFP/TQFP package. The package provides a practical mix of processor, memory, control, and external-bus connections while remaining compatible with conventional multilayer PCB assembly. Because DSP performance depends on code timing, peripheral configuration, and external memory behavior, designers should consult the manufacturer pin-description table and reference design before assigning signals or laying out the board.

Typical uses include industrial signal-processing modules, digital filtering subsystems, communications interface equipment, embedded audio control, and data-acquisition systems. In each case, the 24-bit bus and fixed-point computational model help structure real-time processing between external data converters and system logic. The exact arithmetic throughput, memory organization, peripheral set, and electrical limits should be taken directly from the Analog Devices datasheet before a circuit is released for production.

A principal design consideration is that a 10 MHz clock does not by itself determine application performance. Instruction availability, memory access cycles, DMA behavior, peripheral configuration, and interrupt structure determine realized throughput. Designers should preserve short, deterministic signal paths and follow the reference schematic for decoupling and clock implementation. Firmware should also identify invalid operating states and use the processor's documented reset and clock sequencing procedures.

This product page organizes the identified electrical, timing, packaging, temperature, and commercial information while separating verified facts from parameters that still require confirmation. It also identifies the absence of a confirmed drop-in substitute list, preventing a similarly packaged processor from being presented as a safe replacement without pin-level and software compatibility checks.

Pilihan pengganti yang segera untuk ADSP-2173BST-80 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

ADSP-2173BST-80 Spesifikasi

Device Type Fixed-point digital signal processor
Frekuensi Klock Maksimum 10 MHz
External Data Bus Width 24 bit
Core Supply Voltage 3.30 V
I/O Supply Voltage 3.30 V
Gambaran Suhu Operasi -40°C to +85°C
Temperature Grade Industrial
Number of Terminals 128 terminals
Package Code LFQFP
Package Type 128-TQFP, gull wing
Package Dimensions 14 mm x 20 mm
Jenis Pemasangan Surface mount
Architecture Fixed point

Panduan Konfigurasi Pin ADSP-2173BST-80 14 mm x 20 mm

Konfigurasi pin untuk ADSP-2173BST-80 (14 mm x 20 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 14 mm x 20 mm untuk ADSP-2173BST-80

Tiada data garisan pin yang diperoleh untuk ADSP-2173BST-80.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADSP-2173BST-80 patut untuk 6 aplikasis: Industrial Digital Filtering, Data-Acquisition Signal Conditioning, Embedded Audio Processing, Communications Interface Equipment, Industrial Control Module, Test and Measurement Front End.

🏭

Industrial Digital Filtering

The ADSP-2173BST-80 is appropriate for fixed-point filtering modules that must process sampled signals under deterministic control. Its 10 MHz maximum clock and 24-bit external data-bus width provide the basic computational and data-movement resources for common filter implementations. The processor's -40°C to +85°C industrial range supports use in factory equipment where ambient temperatures vary. Engineers should allocate sufficient memory and DMA support for the chosen filter topology, then verify latency and throughput against the system sample rate.

📊

Data-Acquisition Signal Conditioning

The ADSP-2173BST-80 can serve as the processing core of an industrial data-acquisition module by applying correction, filtering, and scaling to converter data. Its 24-bit external data bus provides a wide path for transferring sampled information, while the fixed-point architecture supports efficient arithmetic in embedded implementations. System designers should align input word length and sample timing across the converter interface, avoid unnecessary bus contention, and test the complete acquisition path for latency and channel-to-channel consistency.

🎧

Embedded Audio Processing

The ADSP-2173BST-80 fits embedded audio modules requiring real-time filtering, mixing, or control in a fixed-point environment. Its 10 MHz clock supports the stated processor operating point, while the 24-bit bus can accommodate high-resolution audio data transfers when the surrounding converter and memory architecture are designed accordingly. Engineers must verify supported audio-clock functions, required filter throughput, codec format, and buffer latency. Firmware should include overload handling to prevent clipping or unstable output during unexpected input levels.

🌐

Communications Interface Equipment

The ADSP-2173BST-80 can be used in communications-oriented equipment for signal shaping, control-loop computation, or protocol-adjacent processing. The 24-bit external data bus supports connections to conversion and interface circuitry, while the fixed-point architecture allows efficient handling of sampled data. Product qualification must include exact clocking, jitter tolerance, latency, and interface timing because those characteristics determine suitability for communications links. Use the Analog Devices reference design and pin-description table as the basis for board-level implementation.

⚙️

Industrial Control Module

The ADSP-2173BST-80 is suitable for control modules that combine sampled feedback with real-time computation. Its fixed-point DSP model supports responsive filtering and control routines, and its industrial temperature range of -40°C to +85°C suits equipment operating beyond commercial-temperature limits. The implementation should define worst-case execution time for the control loop, reserve deterministic memory paths, and use the manufacturer power and clock procedures. External interface timing and safety behavior must be verified independently of the DSP arithmetic.

🖥️

Test and Measurement Front End

The ADSP-2173BST-80 can support embedded measurement front ends that perform real-time digital filtering, calibration, or signal correction. Its 24-bit external data-bus width is useful for transferring high-resolution samples from external converters, while the 10 MHz clock provides the timing reference for the processor. For laboratory-grade instruments, validate clock jitter, analog-to-digital interface synchronization, calibration stability, and data latency. The compact 128-terminal TQFP package also supports integration into multi-channel measurement equipment.

What is the ADSP-2173BST-80?
The ADSP-2173BST-80 is a fixed-point digital signal processor from Analog Devices with a maximum clock frequency of 10 MHz and a 24-bit external data bus. According to the manufacturer datasheet, it is packaged in a 128-terminal industrial-temperature TQFP and operates from a 3.30 V core supply and a 3.30 V I/O supply. It is intended for embedded real-time signal-processing, filtering, and control applications.
What are the key specifications of ADSP-2173BST-80?
The ADSP-2173BST-80 combines a 10 MHz maximum clock, 24-bit external data bus, 3.30 V core and I/O supplies, and 128 terminals in an LFQFP/TQFP package. The Analog Devices datasheet identifies the processor as fixed-point and specifies an industrial operating range of -40°C to +85°C. The package is a surface-mount 14 mm by 20 mm gull-wing format suitable for conventional multilayer PCB assembly.
What is the operating voltage of ADSP-2173BST-80?
The ADSP-2173BST-80 operates with 3.30 V for both its core and I/O rails. These values are identified in the Analog Devices datasheet and distinguish the device from processors requiring separate voltage levels for internal logic and external interfaces. Confirm absolute maximum ratings, decoupling values, and power-sequencing requirements in the datasheet before applying the rails to a new design.
Where can I download the ADSP-2173BST-80 datasheet PDF?
The ADSP-2173BST-80 datasheet can be reached through the Analog Devices documentation listing linked on the product page. The identified datasheet describes the processor's electrical limits, architecture, pin assignments, and operating characteristics. Search for the complete Analog Devices PDF when downloading because the indexed third-party page may present only a viewer or mirror rather than the manufacturer's original file.
Where can I find the ADSP-2173BST-80 pinout?
The authoritative ADSP-2173BST-80 pinout is in the Analog Devices datasheet's pin-description table. The device has 128 gull-wing terminals in an LFQFP/TQFP package, with pin 1 identified by the package marking convention. Use the datasheet table for every signal name, direction, multiplexing function, power pin, ground pin, and no-connect position rather than relying on a generic package drawing.
Is ADSP-2173BST-80 suitable for industrial applications?
Yes, the ADSP-2173BST-80 is identified as an industrial-temperature device with an operating range of -40°C to +85°C. Its 10 MHz fixed-point DSP architecture and 24-bit external data bus suit real-time filtering, acquisition, communications, and embedded control systems. Ambient temperature alone does not establish suitability; the enclosure temperature, power dissipation, and system-level reliability requirements must also be evaluated.
What is the ADSP-2173BST-80 clock frequency?
The ADSP-2173BST-80 has a maximum clock frequency of 10 MHz. This value identifies the processor's top operating clock as stated by Analog Devices. Actual system performance should not be inferred from clock frequency alone because memory access, DMA operation, instruction mix, and peripheral activity also influence execution time. Use the timing and clock-instruction sections of the manufacturer datasheet for design calculations.
What can replace the ADSP-2173BST-80?
No confirmed drop-in replacement for the ADSP-2173BST-80 was identified in the available cross-reference material. A valid replacement would require the same 128-terminal LFQFP footprint, pin-to-pin electrical compatibility, equivalent processor and peripheral resources, compatible memory behavior, and a practical firmware migration path. Similar DSPs in other packages should not be treated as drop-in substitutes without schematic and software adaptation.
Is ADSP-2173BST-80 the same as ADSP-2173BSTZ?
The suffix difference cannot be ignored, and the available technical material does not establish that ADSP-2173BST-80 and ADSP-2173BSTZ are interchangeable. Both may identify members of the same processor family, but package, temperature, lead style, or ordering options can differ by suffix. Confirm each orderable part's package marking, terminal count, temperature grade, and datasheet before treating one as a replacement for the other.
When should I choose ADSP-2173BST-80 over another DSP?
Choose the ADSP-2173BST-80 when a design benefits from a fixed-point DSP running at up to 10 MHz with a 24-bit external bus and an industrial -40°C to +85°C range. Retain the selection when an existing design uses its 128-terminal TQFP footprint, documented peripheral mapping, and supported software environment. Changing families may require a new PCB, revised driver code, and a fresh timing and signal-integrity review.
Is ADSP-2173BST-80 suitable for audio signal processing?
The ADSP-2173BST-80 can be considered for embedded audio filtering and control because it is a fixed-point DSP with a 24-bit external data bus and a 10 MHz maximum clock. Suitability depends on the required sample rate, filter order, codec interface, latency, and memory throughput. Confirm the device's supported audio peripherals and interrupt behavior in the manufacturer datasheet before selecting an external codec.
Where can I buy ADSP-2173BST-80 online?
Use the Request a Quote form on this page to request ADSP-2173BST-80 pricing, current availability, minimum order quantity, and lead time. The form is the appropriate channel for a firm quotation tied to the exact 128-terminal industrial-temperature part number. Engineers should include the target quantity, package form, and any date-critical production schedule with the request.
What is the price of ADSP-2173BST-80?
Request a current quotation for ADSP-2173BST-80 through the Request a Quote form on this page. The exact price can depend on quantity, order breaks, date of inquiry, and component condition, so a static figure would not accurately represent current commercial terms. Include the required order quantity and delivery schedule to obtain a quotation for the exact ADSP-2173BST-80 orderable MPN.
What is the lead time for ADSP-2173BST-80?
Current lead time for ADSP-2173BST-80 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, factory scheduling, and inventory conditions, so it should be obtained for the actual production requirement rather than generalized across the DSP family. Include required delivery dates and permissible alternatives in the request to support an appropriate supply commitment.
Is ADSP-2173BST-80 in stock?
Stock status for the exact ADSP-2173BST-80 should be requested through the Request a Quote form on this page. Availability must be confirmed for the precise manufacturer part number and package form because processor inventory can change independently of family-level listings. Provide the required quantity, annual usage, target date, and acceptable lead-time range for a useful response.
Which Analog Devices equivalent is best for ADSP-2173BST-80?
No Analog Devices or cross-brand equivalent can be confirmed as a drop-in replacement for the ADSP-2173BST-80 from the available cross-reference results. The target uses a 128-terminal LFQFP package and a fixed-point DSP architecture with a 10 MHz clock and 24-bit external bus. A replacement must match the footprint and pin functions and also preserve required peripheral, memory, timing, and firmware behavior.

Data referensi kejuruteraan untuk ADSP-2173BST-80 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADSP-2173BST-80 when the design requires a fixed-point DSP with a 10 MHz maximum clock, a 24-bit external data bus, and an industrial temperature range of -40°C to +85°C. It is especially appropriate for real-time filtering, acquisition conditioning, embedded audio, and industrial control modules where the software architecture and peripheral set align with the processor. Retain it when preserving the 128-terminal LFQFP footprint, existing board, and supported firmware reduces redesign risk. No confirmed drop-in substitute was identified, so changing to another DSP should be treated as a redesign rather than a procurement substitution. A different processor should be considered only after checking pin compatibility, memory and peripheral requirements, clock timing, electrical limits, software support, and thermal performance. For ordinary sequential control with little signal-processing workload, a simpler microcontroller may provide a more economical solution; for higher-throughput processing, compare processor benchmarks and memory bandwidth rather than relying on clock frequency alone.

Perbandingan dengan Gantian

Parametr Produk Ini
Manufacturer Analog Devices
Package 128-terminal LFQFP/TQFP, 14 mm x 20 mm
Processor Type Fixed-point digital signal processor
Maximum Clock Frequency 10 MHz
External Data Bus Width 24 bit
Core Supply Voltage 3.30 V
I/O Supply Voltage 3.30 V
Operating Temperature Range -40°C to +85°C
Temperature Grade Industrial
Terminal Count 128 terminals

Penyeberangsung Jelas

  • Purpose-built fixed-point DSP performance (vsGeneral-purpose microcontrollers)
  • Industrial temperature capability (vsCommercial-temperature DSP alternatives)
  • High-resolution external data path (vsNarrower external bus processors)

Catatan Desain

Do not treat another 128-pin DSP as a drop-in replacement merely because both devices use an LFQFP outline. Pin names, power rails, clock inputs, peripheral assignments, memory interfaces, and voltage tolerances must match the ADSP-2173BST-80 exactly. Preserve the processor's documented reset and clock-sequencing sequence, and review all no-connect and reserved terminals in the Analog Devices pin-description table before routing the PCB.

Place power-decoupling capacitors at the relevant 3.30 V supply pins using the topology and values specified in the manufacturer reference design. Keep the clock path compact and return it through an adjacent ground reference, while isolating high-current switching nodes from sensitive signal routes. The 128-terminal package requires careful fan-out planning so power, ground, processor, and external-bus connections can reach their assigned pins without long loops or difficult fan-in structures.

Use the external data-bus topology and timing constraints from the Analog Devices datasheet when connecting converters, memory, or other bus devices. Account for setup and hold timing, output loading, bus direction changes, and any required termination. The 24-bit bus width increases routing complexity on a 128-terminal package, so validate signal integrity across temperature and supply corners rather than relying only on nominal simulation results.

Estimate processor power dissipation from the selected core and I/O currents and the actual supply voltages, then compare the resulting junction-temperature estimate with the device's allowed operating range. Use the manufacturer thermal information for package-dependent calculations and provide copper area or additional thermal spreading where required. Industrial operation across -40°C to +85°C increases the need to check cold-start behavior and worst-case ambient conditions.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The identified operating range is industrial, but no specific AEC-Q100 qualification, RoHS declaration, REACH declaration, lead-free statement, halogen-free statement, or conflict-minerals declaration was identified for this exact orderable MPN.

Pencarian Berhubungan

ADSP-2173BST-80 datasheet ADSP-2173BST-80 specifications ADSP-2173BST-80 pinout ADSP-2173BST-80 datasheet pdf ADSP-2173BST-80 equivalent ADSP-2173BST-80 replacement ADSP-2173BST-80 cross reference ADSP-2173BST-80 footprint ADSP-2173BST-80 price ADSP-2173BST-80 stock Analog Devices ADSP-2173BST-80 ADSP-2173BST-80 10 MHz DSP ADSP-2173BST-80 TQFP-128 ADSP-2173BST-80 application circuit

Komponen dan Tanda berkaitan

Analog Devices ADSP-2173BST-80 digital signal processor DSP fixed-point processor embedded signal processing semiconductor 24-bit external data bus 10 MHz clock 3.30 V core supply 3.30 V I/O supply industrial temperature range LFQFP-128 TQFP-128 gull-wing package surface-mount package multilayer PCB digital filtering signal conditioning industrial control audio processing data acquisition DMA real-time processing
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ