AKM (Asahi Kasei Microdevices)

AK4128AEQ - 8-Ch 216kHz 24-Bit Audio SRC | AKM

MPN: AK4128AEQ ✓ نشط
64-pin LQFP, 10 mm x 10 mm Package
الحد الأدنى للطلب: 1 |

AK4128AEQ نظرة عامة

The Asahi Kasei Microdevices AK4128AEQ is an eight-channel, 24-bit asynchronous digital sample-rate converter operating at sampling rates from 8 kHz to 216 kHz. The device accepts simultaneous asynchronous stereo audio streams, converts them to a common output sampling rate, and is packaged in a 64-pin LQFP measuring 10 mm by 10 mm.

A digital sample-rate converter, or SRC, is a data-conversion IC that recalculates audio samples from one clock domain and sampling rate into another. The AK4128AEQ sits within the digital-audio signal chain between sources, codecs, DACs, and recording systems. It reduces the need for a shared master clock when devices use different clocks or when multiple asynchronous streams must be aligned to one output rate.

The AK4128AEQ provides eight processing channels, 24-bit resolution, and a maximum sampling rate of 216 kHz. Its internal oscillator eliminates the requirement for an external master clock, while master mode and TDM data interfaces support simultaneous operation with multiple channels. These characteristics make the converter suitable for high-end car audio, DVD recorders, broadcast equipment, and professional digital-audio systems.

The converter performs asynchronous sample-rate conversion rather than simply passing data through. Input samples may be supplied at independent rates between 8 kHz and 216 kHz, and the output operates in the same 8 kHz-to-216 kHz range. The internal clocking architecture therefore supports system simplification when upstream and downstream converters do not share a common clock source.

Typical uses include multichannel automotive infotainment systems, high-resolution audio recorders, professional monitoring equipment, and broadcast consoles. Eight-channel operation reduces the number of discrete converters required when several audio domains are present. TDM support also provides a practical route to carrying multiple synchronized channels over a compact digital connection.

When designing the PCB, route clock, data, and power connections according to the pin-description table in the manufacturer datasheet. Keep digital return paths controlled and place decoupling capacitors close to the supply pins. Confirm the selected operating mode, sample-rate ratios, and digital audio formats against the device configuration tables before finalizing the system clocking scheme.

بدائل مباشرة لـ AK4128AEQ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

AK4128AEQ المواصفات

Device Type 8-channel asynchronous digital sample-rate converter
Number of Channels 8 channels
Bit Resolution 24-bit
Maximum Input Sampling Rate 216 kHz
Minimum Input Sampling Rate 8 kHz
Maximum Output Sampling Rate 216 kHz
Minimum Output Sampling Rate 8 kHz
Conversion Mode Asynchronous
Internal Oscillator Yes; no external master clock required
Supported Operating Mode Master mode
Data Interface TDM
العلبة 64-pin LQFP, 10 mm x 10 mm
Package Code FQFP
Package Height 1.85 mm maximum
Number of Terminals 64
نوع التركيب Surface mount
درجة حرارة التشغيل -20 °C to +85 °C

دليل تكوين أطراف AK4128AEQ 1.85 mm maximum

تكوين الأطراف لـ AK4128AEQ (حزمة 1.85 mm maximum). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 1.85 mm maximum لـ AK4128AEQ

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AK4128AEQ.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

AK4128AEQ مناسب لـ 6 التطبيقs: High-End Automotive Audio, DVD and Disc Recording Systems, Professional Monitoring Converters, Broadcast and Studio Routing, Multichannel Digital-Audio Interface, Clock-Free Audio Architecture.

🚗

High-End Automotive Audio

The AK4128AEQ is well suited to automotive infotainment architectures where radio, navigation, disc, and connectivity sources do not share a common audio clock. Its eight channels can process multiple asynchronous stereo streams concurrently, while sampling rates from 8 kHz to 216 kHz cover compressed-audio playback and high-resolution sources. The internal oscillator avoids distributing a master clock to every source and sink. Its -20 °C to +85 °C stated operating range supports many indoor and protected vehicle environments, although the finished vehicle platform must verify its own environmental requirements.

📺

DVD and Disc Recording Systems

In a DVD recorder or professional disc-based recorder, the AK4128AEQ can align asynchronous digital-audio inputs before they enter the recording path. Eight channels permit simultaneous handling of several stereo domains, avoiding a bank of separate converters when the source and destination rates differ. The device supports rates up to 216 kHz and 24-bit operation for high-resolution workflows. Its internal clock source is especially useful when the transport, decoder, and encoder sections do not share a common clock reference.

🎧

Professional Monitoring Converters

The AK4128AEQ supports professional monitoring systems that combine sources operating at different sampling rates. Eight asynchronous channels can reduce the number of conversion stages in a multi-zone monitor controller, while the internal oscillator simplifies clock partitioning. TDM capability provides an efficient path for parallel digital-audio transfer, and 24-bit resolution preserves the source word length through the conversion stage. For high-rate studio workflows, its 216 kHz ceiling accommodates DSD-derived or high-resolution PCM streams before conversion to the operating rate.

🎙️

Broadcast and Studio Routing

The AK4128AEQ can serve as a multichannel clock-domain bridge in broadcast consoles and studio routing equipment. Eight channels allow several asynchronous sources to share a common output sampling rate, reducing separate converter count and helping maintain a consistent digital-audio format. The TDM interface supports compact parallel channel transport, while the internal oscillator removes the requirement for a shared master clock. Register configuration should be validated against the console's channel mapping, sample-rate ratios, and supported digital-audio formats.

🌐

Multichannel Digital-Audio Interface

The AK4128AEQ is appropriate for a central multichannel interface that collects asynchronous stereo sources and presents them on a common clock domain. Its eight channels can support several simultaneous conversions without using eight separate ICs, and master mode provides a convenient system configuration point. TDM output can carry aligned channel data over one logical digital bus. Designers should budget PCB area for the 10 mm by 10 mm LQFP, verify the TDM frame configuration, and confirm that all attached codecs can operate from the resulting clock and data signals.

🧩

Clock-Free Audio Architecture

The AK4128AEQ enables a clock-free conversion stage when source and destination devices cannot share a low-jitter master clock. Its internal oscillator handles conversion timing, allowing asynchronous input streams to reach a common output rate. This is useful in modular audio systems where independent converters, transports, and wireless receivers each maintain their own clock domains. The design trade-off is that the internal oscillator and supported rate ratios must satisfy the system's synchronization and phase requirements, which should be verified with the manufacturer datasheet before deployment.

What is the AK4128AEQ?
The AK4128AEQ is an eight-channel, 24-bit asynchronous digital sample-rate converter from Asahi Kasei Microdevices. It converts input audio sampling rates from 8 kHz to 216 kHz into output sampling rates over the same range. The 64-pin LQFP package measures 10 mm by 10 mm, and the integrated oscillator eliminates the need for an external master clock.
What sampling rates does the AK4128AEQ support?
The AK4128AEQ supports input and output sampling rates from 8 kHz through 216 kHz. Its eight-channel asynchronous architecture allows several stereo streams operating from different clock domains to be converted to a common output rate. According to the manufacturer datasheet, the converter also supports master mode and a TDM data interface for simultaneous multichannel operation.
Does the AK4128AEQ need an external master clock?
No. The AK4128AEQ contains an internal oscillator and does not require an external master clock. This feature simplifies synchronization when the source converter, codec, DAC, or recording system operates from a different clock domain. The device can therefore be used to align asynchronous audio streams without designing a shared low-jitter master-clock distribution network.
Where can I download the AK4128AEQ datasheet PDF?
The AK4128AEQ datasheet PDF is available through the AKM document listing at datasheets.com. It describes the eight-channel converter, its 8 kHz-to-216 kHz operating range, internal oscillator, master mode, TDM interface, configuration registers, and electrical characteristics. Use the manufacturer document as the authoritative source for pin assignments, timing, and operating-mode tables.
Where can I find the AK4128AEQ pinout?
The AK4128AEQ pin assignments are listed in the pin-description table of the manufacturer datasheet. The device uses a 64-pin LQFP package, but this page does not reproduce the individual pin names because a complete verified pin table was not available for transcription. Before routing a PCB, use the datasheet table to identify supply, ground, clock, reset, control, and audio-data connections.
How does the AK4128AEQ differ from a master-clock-based converter?
The AK4128AEQ performs conversion without requiring an external master clock because it uses an internal oscillator. A master-clock-based converter depends on a common, low-jitter timing reference distributed to multiple devices. The AK4128AEQ instead allows asynchronous source and destination rates, reducing clock-tree complexity while retaining eight-channel and 216 kHz capability.
Is the AK4128AEQ suitable for automotive audio systems?
Yes, the AK4128AEQ fits multichannel automotive audio systems that combine asynchronous streams from separate sources. Its eight channels support multiple stereo domains, and the 64-pin LQFP package provides a compact surface-mount footprint for a controller board. Its stated operating range is -20 °C to +85 °C, so check the complete automotive qualification requirements for the finished system.
What is the AK4128AEQ used for in a DVD recorder?
The AK4128AEQ can align asynchronous digital-audio streams in a DVD recorder or similar multichannel recording system. Its eight channels accommodate simultaneous stereo conversions, while the 24-bit format and 216 kHz maximum rate support high-resolution audio paths. The internal oscillator removes the requirement for a shared master clock between the source and destination sections.
Can AK4128AEQ replace AK4128AVQ directly?
A direct replacement cannot be confirmed from the available documentation. Both MPNs are associated with the AK4128A family, but package and pin compatibility must be verified before substitution. The AK4128AEQ is specified as a 64-pin LQFP, so do not place a different package variant on the same land pattern unless the manufacturer pin tables demonstrate exact compatibility.
What is the best drop-in replacement for the AK4128AEQ?
No verified drop-in replacement was identified for the AK4128AEQ. A valid drop-in substitute must match the 64-pin LQFP land pattern, provide equivalent clock, control, and audio-data pin functions, and preserve the required sample-rate and format capabilities. Treat AK4128AVQ and other AK4128A-family devices as related devices until package and pin-level compatibility are confirmed.
When should I choose the AK4128AEQ over a single-channel SRC?
Choose the AK4128AEQ when the design must convert several asynchronous audio streams concurrently. Eight integrated channels can reduce component count and simplify software configuration compared with separate single-channel converters. For a design carrying only one stereo pair, a simpler converter may be more appropriate if its supported rates and digital formats satisfy the system requirements.
Is the AK4128AEQ suitable for TDM audio interfaces?
Yes, the AK4128AEQ supports a TDM data interface and can operate in master mode. These features allow multiple channels to be transferred in parallel and support simultaneous input of asynchronous stereo data. TDM timing depends on the selected clock configuration and audio format, so validate frame structure, slot widths, and data alignment using the manufacturer configuration tables.
How much does the AK4128AEQ cost?
Current unit pricing for the AK4128AEQ should be confirmed through the Request a Quote form on this page. The form is the appropriate route for a quote tied to the exact 64-pin LQFP ordering code and requested quantity. Its commercial availability, current lead time, and volume pricing can be confirmed at the same time without relying on a static price listing.
Where can I buy the AK4128AEQ online?
Use the Request a Quote form on this page to request the AK4128AEQ by its exact manufacturer part number. Include the required quantity, target delivery date, and shipment location so the quote reflects the correct AK4128AEQ ordering code. The form is also the appropriate way to obtain current stock status and production lead time.
What is the lead time and stock status of the AK4128AEQ?
The current lead time and stock status should be confirmed through the Request a Quote form on this page. Because inventory and manufacturing schedules change by quantity and delivery region, request a quotation for the exact AK4128AEQ MPN and quantity required by the project. The same request can include the desired packing format and scheduled production date.
What are the key specifications of AK4128AEQ that engineers should know?
The AK4128AEQ combines eight conversion channels, 24-bit resolution, and 8 kHz-to-216 kHz asynchronous sampling in a 64-pin LQFP package. Its internal oscillator removes the external master-clock requirement, and the device supports master mode plus TDM data transfer. These characteristics make it particularly suitable for high-end car audio, multichannel recording, broadcast, and professional audio equipment.

بيانات مرجعية هندسية لـ AK4128AEQ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the AK4128AEQ when the design must convert several asynchronous digital-audio streams to a common rate and requires 24-bit resolution or sampling rates above 48 kHz. Its eight channels and internal oscillator can reduce component count and clock-tree complexity in automotive, recording, broadcast, and professional-audio systems. A single-channel SRC may be preferable when only one stereo pair is required and the chosen device covers the necessary formats and rates. Do not select the AK4128AVQ or another related family member solely from its name; confirm that its package, pin functions, clocking, and configuration are identical to the AK4128AEQ. If a verified drop-in substitute is required, use manufacturer cross-reference documentation or obtain a package-and-pin comparison before committing the PCB layout.

المقارنة مع البدائل

المعامل هذا المنتج
Brand Asahi Kasei Microdevices
Package 64-pin LQFP, 10 mm x 10 mm
Device Type Asynchronous digital sample-rate converter
Number of Channels 8 channels
Bit Resolution 24-bit
Input Sampling Rate Range 8 kHz to 216 kHz
Output Sampling Rate Range 8 kHz to 216 kHz
External Master Clock Requirement Not required; internal oscillator
Data Interface TDM
Operating Temperature -20 °C to +85 °C

أبرز الفروقات

  • Eight-channel conversion in one device (مقابلSingle-channel sample-rate converter designs)
  • High-resolution high-rate conversion (مقابلConsumer-rate audio converter designs)
  • No external master clock required (مقابلMaster-clock-dependent converter designs)
  • Parallel multichannel data transfer (مقابلSeparate serial-interface converter arrangements)

ملاحظات التصميم

Treat clock and digital-audio nets as high-speed signals even though this converter operates from digital audio data rather than analog audio. Route clock traces away from output and input interfaces, avoid long parallel runs above neighboring nets, and use a continuous ground reference beneath the device. The 64-pin LQFP has fine-pitch leads, so confirm the land pattern against the package drawing before releasing artwork.

Place supply decoupling capacitors at the pins identified in the manufacturer pin-description table and follow the datasheet's recommended capacitance and voltage ratings. Separate digital signal returns from sensitive analog return paths where the board architecture permits. Because the device includes an internal oscillator, stable supply voltage and low supply noise support repeatable conversion behavior even though an external master clock is unnecessary.

Do not assume that every member of the AK4128A family is pin-compatible with the AK4128AEQ. Package choice, exposed pad requirements, control-pin behavior, and digital-interface configuration can differ between ordering codes. Before substituting a related device, compare the complete pin-description table, power-up sequence, supported audio formats, and operating-mode register definitions in the manufacturer documentation.

Validate TDM framing, slot width, bit alignment, and clock-to-data timing against the selected digital-audio format. Keep the device's clock input and data outputs away from switching regulators and high-current amplifier outputs. When multiple converter channels operate simultaneously, confirm that the selected rate ratios and filter settings meet the latency and dynamic-range requirements of the target system.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available manufacturer or distributor information.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

AK4128AEQ datasheet AK4128AEQ datasheet pdf AK4128AEQ pinout AK4128AEQ 64-LQFP pinout AK4128AEQ sample rate converter AK4128AEQ 8 channel 24 bit AK4128AEQ 216kHz asynchronous SRC AK4128AEQ internal oscillator AK4128AEQ TDM interface AK4128AEQ equivalent AK4128AEQ replacement AK4128AEQ vs AK4128AVQ AK4128AEQ automotive audio AK4128AEQ price AK4128AEQ buy

المكونات والمصطلحات ذات الصلة

Asahi Kasei Microdevices AKM AK4128AEQ AK4128A AK4128AVQ AK4126 digital sample-rate converter SRC asynchronous sample-rate conversion audio data converter 24-bit resolution 216 kHz sampling rate internal oscillator asynchronous clock domains TDM data interface master mode 64-pin LQFP LQFP package family surface-mount package high-end car audio DVD recorder broadcast audio equipment professional audio digital signal processing
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر