AK4128AEQ - 8-Ch 216kHz 24-Bit Audio SRC | AKM
MPN: AK4128AEQ ✓ সক্রিয়AK4128AEQ সারাংশ
A digital sample-rate converter, or SRC, is a data-conversion IC that recalculates audio samples from one clock domain and sampling rate into another. The AK4128AEQ sits within the digital-audio signal chain between sources, codecs, DACs, and recording systems. It reduces the need for a shared master clock when devices use different clocks or when multiple asynchronous streams must be aligned to one output rate.
The AK4128AEQ provides eight processing channels, 24-bit resolution, and a maximum sampling rate of 216 kHz. Its internal oscillator eliminates the requirement for an external master clock, while master mode and TDM data interfaces support simultaneous operation with multiple channels. These characteristics make the converter suitable for high-end car audio, DVD recorders, broadcast equipment, and professional digital-audio systems.
The converter performs asynchronous sample-rate conversion rather than simply passing data through. Input samples may be supplied at independent rates between 8 kHz and 216 kHz, and the output operates in the same 8 kHz-to-216 kHz range. The internal clocking architecture therefore supports system simplification when upstream and downstream converters do not share a common clock source.
Typical uses include multichannel automotive infotainment systems, high-resolution audio recorders, professional monitoring equipment, and broadcast consoles. Eight-channel operation reduces the number of discrete converters required when several audio domains are present. TDM support also provides a practical route to carrying multiple synchronized channels over a compact digital connection.
When designing the PCB, route clock, data, and power connections according to the pin-description table in the manufacturer datasheet. Keep digital return paths controlled and place decoupling capacitors close to the supply pins. Confirm the selected operating mode, sample-rate ratios, and digital audio formats against the device configuration tables before finalizing the system clocking scheme.
এর জন্য ড্রপ-ইন বিকল্প AK4128AEQ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনAK4128AEQ বিশেষণ
| Device Type | 8-channel asynchronous digital sample-rate converter |
| Number of Channels | 8 channels |
| Bit Resolution | 24-bit |
| Maximum Input Sampling Rate | 216 kHz |
| Minimum Input Sampling Rate | 8 kHz |
| Maximum Output Sampling Rate | 216 kHz |
| Minimum Output Sampling Rate | 8 kHz |
| Conversion Mode | Asynchronous |
| Internal Oscillator | Yes; no external master clock required |
| Supported Operating Mode | Master mode |
| Data Interface | TDM |
| প্যাকেজ | 64-pin LQFP, 10 mm x 10 mm |
| Package Code | FQFP |
| Package Height | 1.85 mm maximum |
| Number of Terminals | 64 |
| মাউন্টিং টাইপ | Surface mount |
| অপারেটিং তাপমাত্রা | -20 °C to +85 °C |
AK4128AEQ 1.85 mm maximum পিন কনফিগারেশন গাইড
AK4128AEQ (1.85 mm maximum প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি AK4128AEQ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
AK4128AEQ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-End Automotive Audio, DVD and Disc Recording Systems, Professional Monitoring Converters, Broadcast and Studio Routing, Multichannel Digital-Audio Interface, Clock-Free Audio Architecture.
High-End Automotive Audio
The AK4128AEQ is well suited to automotive infotainment architectures where radio, navigation, disc, and connectivity sources do not share a common audio clock. Its eight channels can process multiple asynchronous stereo streams concurrently, while sampling rates from 8 kHz to 216 kHz cover compressed-audio playback and high-resolution sources. The internal oscillator avoids distributing a master clock to every source and sink. Its -20 °C to +85 °C stated operating range supports many indoor and protected vehicle environments, although the finished vehicle platform must verify its own environmental requirements.
সুপারিশকৃত
DVD and Disc Recording Systems
In a DVD recorder or professional disc-based recorder, the AK4128AEQ can align asynchronous digital-audio inputs before they enter the recording path. Eight channels permit simultaneous handling of several stereo domains, avoiding a bank of separate converters when the source and destination rates differ. The device supports rates up to 216 kHz and 24-bit operation for high-resolution workflows. Its internal clock source is especially useful when the transport, decoder, and encoder sections do not share a common clock reference.
সুপারিশকৃত
Professional Monitoring Converters
The AK4128AEQ supports professional monitoring systems that combine sources operating at different sampling rates. Eight asynchronous channels can reduce the number of conversion stages in a multi-zone monitor controller, while the internal oscillator simplifies clock partitioning. TDM capability provides an efficient path for parallel digital-audio transfer, and 24-bit resolution preserves the source word length through the conversion stage. For high-rate studio workflows, its 216 kHz ceiling accommodates DSD-derived or high-resolution PCM streams before conversion to the operating rate.
সুপারিশকৃত
Broadcast and Studio Routing
The AK4128AEQ can serve as a multichannel clock-domain bridge in broadcast consoles and studio routing equipment. Eight channels allow several asynchronous sources to share a common output sampling rate, reducing separate converter count and helping maintain a consistent digital-audio format. The TDM interface supports compact parallel channel transport, while the internal oscillator removes the requirement for a shared master clock. Register configuration should be validated against the console's channel mapping, sample-rate ratios, and supported digital-audio formats.
সুপারিশকৃত
Multichannel Digital-Audio Interface
The AK4128AEQ is appropriate for a central multichannel interface that collects asynchronous stereo sources and presents them on a common clock domain. Its eight channels can support several simultaneous conversions without using eight separate ICs, and master mode provides a convenient system configuration point. TDM output can carry aligned channel data over one logical digital bus. Designers should budget PCB area for the 10 mm by 10 mm LQFP, verify the TDM frame configuration, and confirm that all attached codecs can operate from the resulting clock and data signals.
সুপারিশকৃত
Clock-Free Audio Architecture
The AK4128AEQ enables a clock-free conversion stage when source and destination devices cannot share a low-jitter master clock. Its internal oscillator handles conversion timing, allowing asynchronous input streams to reach a common output rate. This is useful in modular audio systems where independent converters, transports, and wireless receivers each maintain their own clock domains. The design trade-off is that the internal oscillator and supported rate ratios must satisfy the system's synchronization and phase requirements, which should be verified with the manufacturer datasheet before deployment.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা AK4128AEQ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | 64-pin LQFP, 10 mm x 10 mm |
| Device Type | Asynchronous digital sample-rate converter |
| Number of Channels | 8 channels |
| Bit Resolution | 24-bit |
| Input Sampling Rate Range | 8 kHz to 216 kHz |
| Output Sampling Rate Range | 8 kHz to 216 kHz |
| External Master Clock Requirement | Not required; internal oscillator |
| Data Interface | TDM |
| Operating Temperature | -20 °C to +85 °C |
মূল পার্থক্যসমূহ
- Eight-channel conversion in one device (বনামSingle-channel sample-rate converter designs)
- High-resolution high-rate conversion (বনামConsumer-rate audio converter designs)
- No external master clock required (বনামMaster-clock-dependent converter designs)
- Parallel multichannel data transfer (বনামSeparate serial-interface converter arrangements)
ডিজাইন নোট
Treat clock and digital-audio nets as high-speed signals even though this converter operates from digital audio data rather than analog audio. Route clock traces away from output and input interfaces, avoid long parallel runs above neighboring nets, and use a continuous ground reference beneath the device. The 64-pin LQFP has fine-pitch leads, so confirm the land pattern against the package drawing before releasing artwork.
Place supply decoupling capacitors at the pins identified in the manufacturer pin-description table and follow the datasheet's recommended capacitance and voltage ratings. Separate digital signal returns from sensitive analog return paths where the board architecture permits. Because the device includes an internal oscillator, stable supply voltage and low supply noise support repeatable conversion behavior even though an external master clock is unnecessary.
Do not assume that every member of the AK4128A family is pin-compatible with the AK4128AEQ. Package choice, exposed pad requirements, control-pin behavior, and digital-interface configuration can differ between ordering codes. Before substituting a related device, compare the complete pin-description table, power-up sequence, supported audio formats, and operating-mode register definitions in the manufacturer documentation.
Validate TDM framing, slot width, bit alignment, and clock-to-data timing against the selected digital-audio format. Keep the device's clock input and data outputs away from switching regulators and high-current amplifier outputs. When multiple converter channels operate simultaneously, confirm that the selected rate ratios and filter settings meet the latency and dynamic-range requirements of the target system.
কমপ্লায়েন্স তথ্য
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available manufacturer or distributor information.