AK4388AET - 24-Bit 192kHz Stereo Audio DAC | Asahi Kasei
MPN: AK4388AET ✓ نشطAK4388AET نظرة عامة
An audio DAC is a semiconductor that converts digital PCM or I2S audio samples into continuous analog voltage signals suitable for audio amplifiers and loudspeakers. It belongs to the digital-to-analog converter class within the broader ADC/DAC and signal-conversion IC hierarchy. Its role is to translate the numerical representation of an audio waveform into a balanced or unbalanced analog output while preserving amplitude and linearity as accurately as practical.
The AK4388A provides 24-bit resolution, a maximum sampling rate of 192 kHz, two-channel conversion, and I2S interface support. These characteristics suit high-resolution playback and multirate audio architectures. The 16-pin TSSOP body measures approximately 6.40 mm by 5.00 mm and uses a 0.65 mm lead pitch, allowing compact implementation on densely populated audio boards.
AKM's multibit modulator architecture is intended to combine wide dynamic range with strong linearity. The manufacturer describes the AK4388A as a cost-and-performance-oriented solution for audio systems. Its two-channel architecture permits simultaneous left- and right-channel playback from one device, reducing board area compared with separate single-channel converters where that arrangement is practical.
Typical uses include digital mixing consoles, professional audio interfaces, CD and network-audio playback equipment, active speakers, automotive infotainment systems, and consumer home-theater products. The I2S interface also makes the converter suitable for systems whose audio processor, USB interface, or network audio decoder already produces standard serial audio data.
PCB design should account for the distinction between the digital audio interface and analog output path. Keep digital clock and data traces away from the analog outputs, place the required bypass capacitors close to their supply pins, and follow the manufacturer datasheet for output-filter and reference-component recommendations. Correct grounding is especially important because converter performance depends on low-noise analog supply and reference conditions.
This product page combines the verified package and interface details with application-specific guidance for digital audio conversion. It also provides practical design notes, technical comparisons, and sourcing questions that help engineers evaluate the AK4388AET before integrating it into a high-resolution audio design.
بدائل مباشرة لـ AK4388AET — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع AK4388AET (نفس عامل الشكل والبصمة) — يختلف في Maximum Sampling Rate.
AK4386ET
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←AK4388AET الحدود القصوى والخصائص الكهربائية
| Product Type | Audio digital-to-analog converter (DAC) |
| الدقة | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Number of Channels | 2 channels |
| Digital Audio Interface | I2S |
| Architecture | Multibit modulator architecture |
| Package Type | TSSOP-16 |
| Package Body Dimensions | 6.40 mm x 5.00 mm |
| Lead Pitch | 0.65 mm |
| عدد الدبابيس | 16 pins |
| نوع التركيب | Surface mount |
| نطاق درجة حرارة التشغيل | -20°C to +85°C |
| Lead-Free Construction | Lead-free |
دليل تكوين أطراف AK4388AET 6.40 mm x 5.00 mm
تكوين الأطراف لـ AK4388AET (حزمة 6.40 mm x 5.00 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AK4388AET.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
AK4388AET مناسب لـ 6 التطبيقs: Professional Audio Interface, Digital Mixing Console, CD and Network Audio Player, Active Speaker and Amplifier Platform, Home Theater Audio Decoder, Automotive Infotainment Audio.
Professional Audio Interface
The AK4388AET fits a professional audio interface that requires simultaneous stereo conversion at up to 192 kHz. Its 24-bit resolution and two-channel I2S interface allow a digital audio engine to deliver left- and right-channel data directly to the converter, avoiding separate DACs for each output. The 16-pin TSSOP package helps preserve board area in rack-mounted and desktop equipment. Designers should follow the manufacturer recommendation for bypass capacitors, reference components, and the analog output filter, and should isolate clock and data routing from the analog signal path to limit converted digital noise.
موصى به
Digital Mixing Console
The AK4388AET is appropriate for a digital mixer because it combines two 24-bit channels, I2S input, and operation up to 192 kHz in one TSSOP-16 device. The mixer processor can supply the stereo digital stream while the converter generates the analog outputs for monitoring, recording, or line-level distribution. Its small 6.40 mm by 5.00 mm body leaves more PCB area for routing, controls, and connectors. Clock synchronization and output filtering are the primary design concerns, and both should follow the manufacturer datasheet's recommended circuit.
موصى به
CD and Network Audio Player
For a CD, network-audio, or digital source player, the AK4388AET provides a compact stereo conversion stage for I2S output from a decoder or network-audio processor. Its support for 24-bit data and sample rates through 192 kHz accommodates high-resolution source formats and modern streaming decoders. Two-channel operation produces left and right analog outputs in one package, while the small TSSOP-16 footprint supports enclosure-space-constrained designs. Use the specified output reconstruction filter and maintain clean analog grounding to preserve signal quality.
موصى به
Active Speaker and Amplifier Platform
The AK4388AET can serve as the digital-to-analog stage in an active speaker when the loudspeaker's upstream processor supplies I2S audio. It converts two channels at up to 192 kHz, allowing a shared digital signal chain to feed left and right amplification channels. The converter's compact TSSOP-16 package is useful where analog output circuitry must fit behind a driver or compact enclosure. The design must account for clean supplies, reference stability, output filtering, and the thermal requirements of the downstream power-amplifier stage.
موصى به
Home Theater Audio Decoder
The AK4388AET is suitable for the stereo output stage of a home-theater decoder because the I2S interface accepts digital audio from a surround-sound processor and the DAC provides two-channel, 24-bit conversion at up to 192 kHz. It can handle conventional stereo playback while the surrounding codec handles multichannel decoding and bass management. Its compact TSSOP-16 package simplifies routing near the analog output connector. Check the host clock ratio and ensure the output filters match the selected sample rate before finalizing the PCB.
موصى به
Automotive Infotainment Audio
The AK4388AET can be evaluated for automotive infotainment audio blocks that use an I2S source and require a compact two-channel DAC. Its 24-bit conversion, support for sample rates through 192 kHz, and -20°C to +85°C operating range align with many entertainment subsystems. The 16-pin TSSOP package is straightforward to route on a dense main board. Before production use, confirm the automotive qualification status, vibration requirements, supply behavior, and all AEC-Q100 expectations directly with the manufacturer for the exact ordering suffix.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ AK4388AET — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | AK4386ET |
|---|---|---|
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Package | TSSOP-16, 6.40 mm x 5.00 mm, 0.65 mm pitch | TSSOP-16 |
أبرز الفروقات
- Supports high-resolution stereo conversion (مقابلAK4386ET)
- Two-channel conversion in one package (مقابلAK4386ET)
- Compact surface-mount implementation (مقابلAK4386ET)
ملاحظات التصميم
Place all required bypass capacitors directly beside the AK4388AET supply pins, with short ground returns and the smallest practical loop area. Separate the digital I2S routing from the analog output path and place the converter close to the output-reconstruction network. This arrangement reduces the pickup of switching edges on sensitive analog nodes and avoids adding trace resistance between the DAC outputs and their filters.
Treat the master clock as a high-speed digital signal even though the DAC is audio-focused. Use short, continuous clock and data routes, provide a low-impedance return path, and avoid routing them parallel to analog outputs over long board distances. Confirm the source device's clock polarity, edge relationship, data alignment, and supported clock ratio against the manufacturer datasheet before enabling the converter.
Do not substitute generic reconstruction filters for the network specified by the manufacturer, because cutoff frequency and component tolerances affect the time-domain response of the converter. Likewise, verify the allowed analog and digital supply ranges, output configuration, and startup sequence for the exact AK4388AET ordering code. The broad family description alone is not sufficient to authorize a different supply rail or pin connection.
Keep the reference and analog output paths away from switching regulators, high-current inductor traces, and digital processor buses. Use a continuous ground reference beneath the analog section where the recommended layout permits, and terminate unused digital inputs according to the manufacturer guidance. These measures reduce ground bounce and digital coupling that can otherwise appear as distortion or reduced signal-to-noise performance.
معلومات الامتثال
The AK4388AET package is identified as lead-free plastic TSSOP-16. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification status are not established by the available product information.