AKM (Asahi Kasei Microdevices)

AK4388AET - 24-Bit 192kHz Stereo Audio DAC | Asahi Kasei

MPN: AK4388AET ✓ सक्रिय
TSSOP-16 Package
न्यूनतम ऑर्डर मात्रा: 1 |

AK4388AET अवलोकन

The Asahi Kasei Microdevices AK4388AET is a 24-bit, 192 kHz, two-channel audio digital-to-analog converter with I2S digital audio input in a lead-free 16-pin TSSOP package. The device is designed for compact audio systems requiring high-resolution conversion, including professional audio equipment, consumer audio products, digital mixers, and multi-channel audio platforms.

An audio DAC is a semiconductor that converts digital PCM or I2S audio samples into continuous analog voltage signals suitable for audio amplifiers and loudspeakers. It belongs to the digital-to-analog converter class within the broader ADC/DAC and signal-conversion IC hierarchy. Its role is to translate the numerical representation of an audio waveform into a balanced or unbalanced analog output while preserving amplitude and linearity as accurately as practical.

The AK4388A provides 24-bit resolution, a maximum sampling rate of 192 kHz, two-channel conversion, and I2S interface support. These characteristics suit high-resolution playback and multirate audio architectures. The 16-pin TSSOP body measures approximately 6.40 mm by 5.00 mm and uses a 0.65 mm lead pitch, allowing compact implementation on densely populated audio boards.

AKM's multibit modulator architecture is intended to combine wide dynamic range with strong linearity. The manufacturer describes the AK4388A as a cost-and-performance-oriented solution for audio systems. Its two-channel architecture permits simultaneous left- and right-channel playback from one device, reducing board area compared with separate single-channel converters where that arrangement is practical.

Typical uses include digital mixing consoles, professional audio interfaces, CD and network-audio playback equipment, active speakers, automotive infotainment systems, and consumer home-theater products. The I2S interface also makes the converter suitable for systems whose audio processor, USB interface, or network audio decoder already produces standard serial audio data.

PCB design should account for the distinction between the digital audio interface and analog output path. Keep digital clock and data traces away from the analog outputs, place the required bypass capacitors close to their supply pins, and follow the manufacturer datasheet for output-filter and reference-component recommendations. Correct grounding is especially important because converter performance depends on low-noise analog supply and reference conditions.

This product page combines the verified package and interface details with application-specific guidance for digital audio conversion. It also provides practical design notes, technical comparisons, and sourcing questions that help engineers evaluate the AK4388AET before integrating it into a high-resolution audio design.

के लिए ड्रॉप-इन विकल्प AK4388AET — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AK4388AET (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Maximum Sampling Rate.

AKM Semiconductor
Maximum Sampling Rate: 96 kHz
इसके साथ तुलना करें AK4388AET →

AK4386ET

✅ ड्रॉप-इन
AKM Semiconductor
📦 TSSOP-16
Stereo audio DAC · Advanced Multi-Bit Delta-Sigma · 24 bit · 2 channels · 96 kHz · 100 dB at 3 V · 2.2 V to 3.6 V · Single supply

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AK4388AET Maximum Ratings और Electrical Characteristics

Product Type Audio digital-to-analog converter (DAC)
रेज़ोल्यूशन 24 bit
Maximum Sampling Rate 192 kHz
Number of Channels 2 channels
Digital Audio Interface I2S
Architecture Multibit modulator architecture
Package Type TSSOP-16
Package Body Dimensions 6.40 mm x 5.00 mm
Lead Pitch 0.65 mm
पिन की संख्या 16 pins
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान रेंज -20°C to +85°C
Lead-Free Construction Lead-free

AK4388AET 6.40 mm x 5.00 mm पिन कॉन्फ़िगरेशन गाइड

AK4388AET (6.40 mm x 5.00 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AK4388AET के लिए 6.40 mm x 5.00 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AK4388AET.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AK4388AET के लिए उपयुक्त है 6 अनुप्रयोगs: Professional Audio Interface, Digital Mixing Console, CD and Network Audio Player, Active Speaker and Amplifier Platform, Home Theater Audio Decoder, Automotive Infotainment Audio.

🎧

Professional Audio Interface

The AK4388AET fits a professional audio interface that requires simultaneous stereo conversion at up to 192 kHz. Its 24-bit resolution and two-channel I2S interface allow a digital audio engine to deliver left- and right-channel data directly to the converter, avoiding separate DACs for each output. The 16-pin TSSOP package helps preserve board area in rack-mounted and desktop equipment. Designers should follow the manufacturer recommendation for bypass capacitors, reference components, and the analog output filter, and should isolate clock and data routing from the analog signal path to limit converted digital noise.

🎚️

Digital Mixing Console

The AK4388AET is appropriate for a digital mixer because it combines two 24-bit channels, I2S input, and operation up to 192 kHz in one TSSOP-16 device. The mixer processor can supply the stereo digital stream while the converter generates the analog outputs for monitoring, recording, or line-level distribution. Its small 6.40 mm by 5.00 mm body leaves more PCB area for routing, controls, and connectors. Clock synchronization and output filtering are the primary design concerns, and both should follow the manufacturer datasheet's recommended circuit.

🌐

CD and Network Audio Player

For a CD, network-audio, or digital source player, the AK4388AET provides a compact stereo conversion stage for I2S output from a decoder or network-audio processor. Its support for 24-bit data and sample rates through 192 kHz accommodates high-resolution source formats and modern streaming decoders. Two-channel operation produces left and right analog outputs in one package, while the small TSSOP-16 footprint supports enclosure-space-constrained designs. Use the specified output reconstruction filter and maintain clean analog grounding to preserve signal quality.

🔊

Active Speaker and Amplifier Platform

The AK4388AET can serve as the digital-to-analog stage in an active speaker when the loudspeaker's upstream processor supplies I2S audio. It converts two channels at up to 192 kHz, allowing a shared digital signal chain to feed left and right amplification channels. The converter's compact TSSOP-16 package is useful where analog output circuitry must fit behind a driver or compact enclosure. The design must account for clean supplies, reference stability, output filtering, and the thermal requirements of the downstream power-amplifier stage.

📺

Home Theater Audio Decoder

The AK4388AET is suitable for the stereo output stage of a home-theater decoder because the I2S interface accepts digital audio from a surround-sound processor and the DAC provides two-channel, 24-bit conversion at up to 192 kHz. It can handle conventional stereo playback while the surrounding codec handles multichannel decoding and bass management. Its compact TSSOP-16 package simplifies routing near the analog output connector. Check the host clock ratio and ensure the output filters match the selected sample rate before finalizing the PCB.

🚗

Automotive Infotainment Audio

The AK4388AET can be evaluated for automotive infotainment audio blocks that use an I2S source and require a compact two-channel DAC. Its 24-bit conversion, support for sample rates through 192 kHz, and -20°C to +85°C operating range align with many entertainment subsystems. The 16-pin TSSOP package is straightforward to route on a dense main board. Before production use, confirm the automotive qualification status, vibration requirements, supply behavior, and all AEC-Q100 expectations directly with the manufacturer for the exact ordering suffix.

What is the AK4388AET?
The AK4388AET is a two-channel, 24-bit audio DAC from Asahi Kasei Microdevices that supports sampling rates up to 192 kHz and I2S digital audio input. It is packaged in a lead-free 16-pin TSSOP measuring approximately 6.40 mm by 5.00 mm. According to the manufacturer datasheet, its multibit modulator architecture is intended to provide a practical balance of dynamic range and linearity for high-performance audio systems.
What are the key specifications of AK4388AET that engineers should know?
The AK4388AET provides 24-bit resolution, a maximum sample rate of 192 kHz, two simultaneous audio channels, and an I2S interface in a 16-pin TSSOP package. The device operates from -20°C to +85°C, uses a 0.65 mm lead pitch, and has approximate body dimensions of 6.40 mm by 5.00 mm. These are the principal interface, conversion, environmental, and mechanical characteristics identified in the manufacturer datasheet and product listings.
Where can I download the AK4388AET datasheet PDF?
The AK4388AET datasheet PDF can be accessed through the datasheet resource linked on this page or through the manufacturer's product documentation for the AK4388A. The document should be used to confirm the complete pin assignments, supported digital formats, clock requirements, output configuration, recommended external components, and electrical limits before PCB release. The linked datasheet archive page also provides access to AKM datasheets and related technical material.
Where can I find the AK4388AET pinout?
The AK4388AET pin assignments are defined in the manufacturer datasheet for its 16-pin TSSOP package. Use the pin-description table and package drawing to map power, ground, digital clock, data, and analog output connections to the physical layout. The package contains 16 pins at a 0.65 mm pitch, and its approximate body size is 6.40 mm by 5.00 mm. Confirm every signal against the exact datasheet revision before assigning PCB tracks.
Is the AK4388AET suitable for high-resolution audio equipment?
Yes, the AK4388AET is suitable for high-resolution audio equipment because it supports 24-bit data and sampling rates up to 192 kHz. Its two-channel I2S interface allows direct connection to many digital audio processors and decoders, while the 16-pin TSSOP package supports compact board layouts. The manufacturer describes the multibit modulator as combining wide dynamic range with good linearity for professional and consumer audio applications.
AK4388AET vs AK4386ET: which is better for a 192 kHz audio design?
The AK4388AET is the clearer choice when a design explicitly requires a 24-bit converter operating up to 192 kHz. The AK4386ET appears in the cross-reference results, but the available information does not establish that every clock, interface, output, and pin function is identical. According to the manufacturer documentation for the AK4388A, the AK4388AET uses an I2S interface and a multibit modulator. Compare the two datasheets before treating the AK4386ET as a drop-in substitute.
When should I choose the AK4388AET over another stereo audio DAC?
Choose the AK4388AET when the design needs a 24-bit, two-channel DAC with I2S input and support for audio sample rates up to 192 kHz in a compact TSSOP-16 package. It is particularly useful when an existing audio engine already outputs I2S data and the PCB can accommodate its specified power and reference connections. Select another converter instead when a different interface, package, channel count, or automotive qualification is required.
Is the AK4388AET suitable for a digital mixer or professional audio interface?
The AK4388AET is suitable for a digital mixer or professional audio interface requiring two-channel, 24-bit conversion at up to 192 kHz. Its I2S input supports connection to a digital mixer engine, while the analog outputs can feed downstream amplification or line-level circuitry. The design must provide the required analog and digital supplies, a suitable clock, and the external filtering specified by the manufacturer datasheet to preserve converter performance.
What can replace the AK4388AET?
The AK4386ET is the closest documented candidate for comparison with the AK4388AET, but it should not be treated as a confirmed drop-in replacement without checking its complete datasheet. A valid replacement must match the 16-pin TSSOP footprint, pin functions, I2S clocking, supply voltages, reference requirements, and analog-output architecture. No additional pin-compatible replacement can be confirmed from the available cross-reference results, so PCB changes should not be assumed.
Is the AK4388AET the same as the AK4388AET-E2?
No, the AK4388AET-E2 is a distinct orderable suffix rather than a confirmed drop-in functional alternative. The available information does not establish whether the suffix changes temperature grade, packing, marking, or another commercial attribute. For design use, begin with the AK4388AET manufacturer datasheet and request the full ordering information for the -E2 version before treating it as interchangeable.
Where can I buy the AK4388AET online?
Use the Request a Quote form on this page to ask for AK4388AET availability, current lead time, and minimum order quantity. The form is the appropriate route for an exact-MPN sourcing request because package suffix, manufacturing condition, and order quantity can affect availability. Confirm that the quoted line item is specifically AK4388AET in the 16-pin TSSOP package before placing the order.
What is the price of the AK4388AET?
The current commercial price for the AK4388AET should be requested through the Request a Quote form on this page. A quote request can account for the exact package suffix, order quantity, requested delivery date, and current component availability. No static price figure is used here because the value may change with inventory and purchasing volume. The manufacturer datasheet remains the authoritative source for functional specifications.
What is the lead time and stock status for AK4388AET?
Request the current AK4388AET stock status, lead time, and minimum order quantity through the Request a Quote form on this page. The product's distributor listings indicate that the component is actively offered, but a listing alone does not establish a guaranteed allocation for every order quantity. Include your required schedule and target quantity in the request so the supplier can confirm the most useful production commitment.
Does the AK4388AET support 192 kHz I2S audio?
Yes, the AK4388AET supports I2S audio at sample rates up to 192 kHz with 24-bit conversion resolution. The exact supported master-clock relationship and data-word format must still be taken from the manufacturer datasheet, because the host processor and audio engine must agree on clocking and framing. The two-channel architecture allows simultaneous stereo playback from one converter.
What power and layout considerations apply to AK4388AET designs?
Provide the analog and digital supply voltages specified by the manufacturer and place the required bypass capacitors close to their associated pins. Keep I2S clock and data routing away from the analog outputs, maintain a quiet reference and ground arrangement, and follow the recommended output-filter network. Decoupling values and startup sequencing should be copied from the manufacturer datasheet rather than inferred from a generic audio-DAC design.

के लिए इंजीनियरिंग संदर्भ डेटा AK4388AET — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AK4388AET when the design requires a two-channel, 24-bit DAC with I2S input and operation up to 192 kHz, particularly when the source processor already supplies standard serial audio data. Its TSSOP-16 package is suitable for compact professional audio, digital mixer, network-player, active-speaker, and home-theater products. The AK4386ET can be considered only after its complete datasheet confirms matching pin functions, clocking, supplies, reference requirements, and analog outputs; the available information does not prove drop-in compatibility. For designs requiring a different digital interface, more channels, a different package, or confirmed automotive qualification, select an alternative after checking the exact application requirements rather than assuming footprint compatibility.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AK4386ET
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices
Package TSSOP-16, 6.40 mm x 5.00 mm, 0.65 mm pitch TSSOP-16

मुख्य विशेषताएँ

  • Supports high-resolution stereo conversion (बनामAK4386ET)
  • Two-channel conversion in one package (बनामAK4386ET)
  • Compact surface-mount implementation (बनामAK4386ET)

डिज़ाइन नोट्स

Place all required bypass capacitors directly beside the AK4388AET supply pins, with short ground returns and the smallest practical loop area. Separate the digital I2S routing from the analog output path and place the converter close to the output-reconstruction network. This arrangement reduces the pickup of switching edges on sensitive analog nodes and avoids adding trace resistance between the DAC outputs and their filters.

Treat the master clock as a high-speed digital signal even though the DAC is audio-focused. Use short, continuous clock and data routes, provide a low-impedance return path, and avoid routing them parallel to analog outputs over long board distances. Confirm the source device's clock polarity, edge relationship, data alignment, and supported clock ratio against the manufacturer datasheet before enabling the converter.

Do not substitute generic reconstruction filters for the network specified by the manufacturer, because cutoff frequency and component tolerances affect the time-domain response of the converter. Likewise, verify the allowed analog and digital supply ranges, output configuration, and startup sequence for the exact AK4388AET ordering code. The broad family description alone is not sufficient to authorize a different supply rail or pin connection.

Keep the reference and analog output paths away from switching regulators, high-current inductor traces, and digital processor buses. Use a continuous ground reference beneath the analog section where the recommended layout permits, and terminate unused digital inputs according to the manufacturer guidance. These measures reduce ground bounce and digital coupling that can otherwise appear as distortion or reduced signal-to-noise performance.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Yes
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The AK4388AET package is identified as lead-free plastic TSSOP-16. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification status are not established by the available product information.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AK4388AET datasheet AK4388AET pinout AK4388AET datasheet pdf AK4388AET specifications AK4388AET TSSOP-16 AK4388AET 24-bit 192kHz AK4388AET I2S DAC AK4388AET equivalent AK4388AET replacement AK4388AET cross reference AK4388AET vs AK4386ET AK4388AET price AK4388AET stock Asahi Kasei AK4388AET

संबंधित कंपोनेंट्स और शब्द

Asahi Kasei Microdevices AK4388AET AK4386ET audio DAC digital-to-analog converter ADC/DAC signal-conversion IC semiconductor 24-bit resolution 192 kHz sampling I2S multibit modulator TSSOP-16 TSSOP package family surface-mount technology SMD stereo audio digital mixer professional audio interface network audio player home theater active speaker automotive infotainment lead-free packaging
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें