AK5365VQ - 24-Bit 96kHz Audio ADC | AKM | LQFP-44
MPN: AK5365VQ ✗ انتهى عمره الإنتاجيAK5365VQ نظرة عامة
An audio ADC is a mixed-signal semiconductor that converts continuous analog microphone or line-level signals into digital PCM data. Its broader hierarchy is ADC -> data converter -> audio converter -> mixed-signal integrated circuit. The AK5365VQ combines this conversion function with input selection, gain control, and automatic level control, reducing the number of separate analog components required in consumer audio and recording systems.
Key features include 24-bit resolution, a maximum sampling rate of 96kHz, two-channel operation, and support for both I2C and SPI host interfaces. The integrated selector routes audio sources, while the PGA provides adjustable analog gain and the ALC function helps maintain an appropriate signal level. These functions make the device particularly suitable for compact digital-recording products requiring high-resolution conversion without a large external analog signal chain.
The AK5365VQ operates from dual supply rails, with digital and analog supply ranges identified as 3V to 5.25V and 4.75V to 5.25V, respectively. I2C and SPI connectivity allows the converter to pair with application processors, digital audio processors, and digital-recording controllers. The 44-LQFP package provides a defined 10mm by 10mm footprint and 44 numbered terminals for compact, high-density equipment designs.
Typical applications include consumer audio equipment, digital recorders, microphone preamp and capture systems, audio interfaces, and portable recording products. Its 24-bit resolution is appropriate for lossless or high-resolution PCM workflows, while the 96kHz maximum rate supports audio beyond the 48kHz CD sampling rate. Systems requiring higher channel counts, different electrical interfaces, or a smaller package should evaluate the complete signal chain before integrating the device.
The primary design consideration is separating analog and digital supplies while maintaining short, low-noise routing between the microphone inputs, reference circuitry, and ground planes. Decoupling capacitors should be placed directly at the relevant supply terminals, and the analog input network should avoid digital return currents. Confirm startup sequencing, interface mode settings, supported clock configurations, and the complete pin description against the manufacturer datasheet before releasing production hardware.
This product page combines the exact AK5365VQ device identity, package and interface information with application-oriented design guidance, sourcing questions, and a structured comparison framework. Because no pin-compatible substitute was established, the page does not present electrically similar devices as drop-in replacements; PCB changes or different converter architectures should be treated as redesigns rather than substitutions.
بدائل مباشرة لـ AK5365VQ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلAK5365VQ الحدود القصوى والخصائص الكهربائية
| Device Type | 24-bit audio analog-to-digital converter |
| الدقة | 24 bit |
| Maximum Sampling Rate | 96kHz |
| Sampling Rate Range | 32kHz to 96kHz |
| Channel Count | 2 channels |
| Converter Architecture | Enhanced Dual-Bit modulator architecture |
| Integrated Functions | Audio selector, programmable gain amplifier, and automatic level control |
| Digital Interface | I2C and SPI |
| Digital Supply Voltage Range | 3V to 5.25V |
| Analog Supply Voltage Range | 4.75V to 5.25V |
| Package Type | 44-LQFP (10mm x 10mm) |
| Package Pin Count | 44 pins |
| نوع التركيب | Surface mount |
| Application Category | Consumer audio and digital recording |
دليل تكوين أطراف AK5365VQ 44 pins
تكوين الأطراف لـ AK5365VQ (حزمة 44 pins). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AK5365VQ.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
AK5365VQ مناسب لـ 6 التطبيقs: Consumer Digital Audio Equipment, Digital Recording Systems, Microphone Capture Front Ends, Portable Stereo Recorders, Audio Interface Products, Consumer Audio Capture Products.
Consumer Digital Audio Equipment
The AK5365VQ fits consumer digital audio equipment requiring two-channel, 24-bit conversion up to 96kHz. Its 32kHz-to-96kHz sampling range supports high-resolution playback, recording, and signal-capture functions, while the integrated selector, PGA, and ALC reduce the number of separate analog-routing and gain components. In a compact source-routing design, the converter can accept two audio sources, apply adjustable gain, and deliver data through I2C or SPI. Compared with a basic ADC, this integration simplifies analog control and supports consumer-recording formats above the 48kHz CD sampling rate.
موصى به
Digital Recording Systems
The AK5365VQ is appropriate for two-channel digital recorders that need 24-bit conversion at sampling rates from 32kHz through 96kHz. The programmable gain amplifier and automatic level control can simplify capture-level management in consumer recording equipment, while the audio selector supports source routing without a separate analog switch in every configuration. Its 44-LQFP package fits densely populated products, and I2C or SPI gives the recording controller flexible options for setup and data transfer. Clocking, input headroom, and ALC timing remain critical system-level checks.
موصى به
Microphone Capture Front Ends
The AK5365VQ can serve as the conversion stage in a stereo microphone capture front end when the design requires 24-bit resolution, a maximum rate of 96kHz, and integrated gain management. Its PGA supports adjustable signal conditioning, and the ALC function can help maintain a useful recording level as microphone amplitudes change. A practical implementation should place the analog input network close to the converter, isolate it from digital switching currents, and verify the exact input impedance, supported gain range, and maximum allowable source voltage before choosing external microphone conditioning components.
موصى به
Portable Stereo Recorders
For a portable stereo recorder, the AK5365VQ combines a compact 44-LQFP package, two-channel conversion, and 96kHz maximum sampling in a function set tailored to high-resolution capture. The 10mm by 10mm package leaves room for the microphone front end, storage controller, and power-management circuitry in a dense enclosure. I2C is useful for a resource-constrained control link, while SPI can support a higher-throughput implementation where required. Battery and converter layout must prevent switching noise and ground current from degrading the analog input or clock signals.
موصى به
Audio Interface Products
The AK5365VQ can be integrated into a two-channel audio interface when the target product requires 24-bit data at sample rates above 48kHz. Its selector supports source routing, the PGA provides adjustable analog gain, and the ALC offers automatic level management for capture-oriented interfaces. I2C or SPI connectivity permits configuration by a USB or network audio controller. For a studio-class product, engineers should still compare clock-jitter sensitivity, dynamic range, distortion, and supported master-clock arrangements with the complete datasheet rather than relying only on nominal resolution and maximum sample rate.
موصى به
Consumer Audio Capture Products
The AK5365VQ is well matched to consumer audio capture products that combine multiple analog sources with high-resolution digital recording. The integrated selector can route left and right inputs, the PGA supports level adjustment, and the ALC reduces manual gain intervention during changing source conditions. Its 24-bit, 96kHz capability supports higher-rate archival or mastering workflows. System integration should include stable analog and digital supplies, low-impedance reference routing, short input traces, and a host processor capable of receiving the converter's selected I2C or SPI format.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ AK5365VQ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
Do not select another converter solely because its headline resolution matches. Compare analog input topology, source-selection requirements, gain range, ALC behavior, clock architecture, reference requirements, interface protocol, register compatibility, and package pins. Because no alternative was verified as pin-to-pin compatible, changing converters should be treated as a redesign. For a new production program, prioritize an active device with documented lifecycle support, electrical performance matching the application, and a complete transition plan for any installed AK5365VQ population.
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Device Type | 24-bit audio ADC |
| Brand | Asahi Kasei Microdevices |
| Package | 44-LQFP (10mm x 10mm) |
| Resolution | 24 bit |
| Maximum Sampling Rate | 96kHz |
| Sampling Rate Range | 32kHz to 96kHz |
| Channel Count | 2 channels |
| Digital Interface | I2C and SPI |
| Digital Supply Voltage | 3V to 5.25V |
| Analog Supply Voltage | 4.75V to 5.25V |
| Integrated Frontend | Selector, PGA, and ALC |
| Lifecycle Status | Obsolete |
أبرز الفروقات
- Integrated analog frontend reduces external signal-chain complexity (مقابلA basic 24-bit ADC without integrated selector, PGA, or ALC)
- Supports high-resolution recording beyond the 48kHz CD rate (مقابلA 24-bit ADC limited to 48kHz sampling)
- Offers two control and data interface choices (مقابلA parallel-interface audio ADC)
ملاحظات التصميم
Place the AK5365VQ analog input, supply, and reference connections directly beside their corresponding pins. Keep the audio-selector and PGA input paths away from digital clock, SPI, and I2C traces, particularly the clock line. Use a continuous analog ground region beneath the converter and route return currents from digital outputs away from the audio-input reference point. A single-ended return that passes beneath the analog input network can convert switching current into input-voltage noise.
Treat the 3V-to-5.25V digital supply and 4.75V-to-5.25V analog supply as separate networks, even when both derive from one system source. Place the manufacturer-recommended local bypass capacitors at the relevant supply terminals with short ground returns. Keep the analog regulator free from high-ripple loads and place its output capacitor where it cannot inject recovery current into the audio input path. Verify startup behavior and the permissible sequencing relationships before connecting shared supply rails.
Route the converter clock and serial interface away from the microphone and line-level inputs, with a continuous ground reference beneath high-speed digital traces. Avoid routing I2C, SPI, and control buses beneath the analog input pins. If the selector connects to external sources, keep those routes away from clocks and switching-regulator nodes. A compact 44-LQFP layout can still couple adjacent pins electromagnetically, so preserve the datasheet's recommended component placement and component-orientation conventions.
Do not interpret the 24-bit resolution label as a guaranteed 24-bit system accuracy. The usable dynamic range also depends on the analog frontend, reference voltage, clock jitter, source impedance, gain setting, PCB grounding, and ALC configuration. Likewise, supporting 96kHz does not by itself guarantee the required dynamic range in every mode. Review the electrical characteristics for the selected gain and clock arrangement, and avoid changing ALC or PGA settings dynamically without checking their interaction.
معلومات الامتثال
The AK5365VQ is a consumer-audio mixed-signal IC, so AEC-Q100 automotive qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the available product information and remain unknown.