AKM (Asahi Kasei Microdevices)

AK5365VQ - 24-Bit 96kHz Audio ADC | AKM | LQFP-44

부품 번호: AK5365VQ ✗ 단종
3V to 5.25V Vdss 44-LQFP (10mm x 10mm) Package
MOQ: 1 |

AK5365VQ 개요

Asahi Kasei Microdevices AK5365VQ is a high-performance 24-bit audio analog-to-digital converter with an integrated audio selector, programmable gain amplifier, and automatic level control for consumer audio and digital recording equipment. It supports sampling rates from 32kHz to 96kHz, communicates through I2C and SPI interfaces, and is packaged in a 44-LQFP measuring 10mm by 10mm. The converter also uses AKM Enhanced Dual-Bit modulator architecture to support high-resolution audio conversion.

An audio ADC is a mixed-signal semiconductor that converts continuous analog microphone or line-level signals into digital PCM data. Its broader hierarchy is ADC -> data converter -> audio converter -> mixed-signal integrated circuit. The AK5365VQ combines this conversion function with input selection, gain control, and automatic level control, reducing the number of separate analog components required in consumer audio and recording systems.

Key features include 24-bit resolution, a maximum sampling rate of 96kHz, two-channel operation, and support for both I2C and SPI host interfaces. The integrated selector routes audio sources, while the PGA provides adjustable analog gain and the ALC function helps maintain an appropriate signal level. These functions make the device particularly suitable for compact digital-recording products requiring high-resolution conversion without a large external analog signal chain.

The AK5365VQ operates from dual supply rails, with digital and analog supply ranges identified as 3V to 5.25V and 4.75V to 5.25V, respectively. I2C and SPI connectivity allows the converter to pair with application processors, digital audio processors, and digital-recording controllers. The 44-LQFP package provides a defined 10mm by 10mm footprint and 44 numbered terminals for compact, high-density equipment designs.

Typical applications include consumer audio equipment, digital recorders, microphone preamp and capture systems, audio interfaces, and portable recording products. Its 24-bit resolution is appropriate for lossless or high-resolution PCM workflows, while the 96kHz maximum rate supports audio beyond the 48kHz CD sampling rate. Systems requiring higher channel counts, different electrical interfaces, or a smaller package should evaluate the complete signal chain before integrating the device.

The primary design consideration is separating analog and digital supplies while maintaining short, low-noise routing between the microphone inputs, reference circuitry, and ground planes. Decoupling capacitors should be placed directly at the relevant supply terminals, and the analog input network should avoid digital return currents. Confirm startup sequencing, interface mode settings, supported clock configurations, and the complete pin description against the manufacturer datasheet before releasing production hardware.

This product page combines the exact AK5365VQ device identity, package and interface information with application-oriented design guidance, sourcing questions, and a structured comparison framework. Because no pin-compatible substitute was established, the page does not present electrically similar devices as drop-in replacements; PCB changes or different converter architectures should be treated as redesigns rather than substitutions.

드롭인 대체품: AK5365VQ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

AK5365VQ 최대 정격 & 전기적 특성

Device Type 24-bit audio analog-to-digital converter
분해능 24 bit
Maximum Sampling Rate 96kHz
Sampling Rate Range 32kHz to 96kHz
Channel Count 2 channels
Converter Architecture Enhanced Dual-Bit modulator architecture
Integrated Functions Audio selector, programmable gain amplifier, and automatic level control
Digital Interface I2C and SPI
Digital Supply Voltage Range 3V to 5.25V
Analog Supply Voltage Range 4.75V to 5.25V
Package Type 44-LQFP (10mm x 10mm)
Package Pin Count 44 pins
실장 유형 Surface mount
Application Category Consumer audio and digital recording

AK5365VQ 44 pins 핀 구성 가이드

AK5365VQ(44 pins 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AK5365VQ의 44 pins 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AK5365VQ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AK5365VQ 적합 용도: 6 애플리케이션s: Consumer Digital Audio Equipment, Digital Recording Systems, Microphone Capture Front Ends, Portable Stereo Recorders, Audio Interface Products, Consumer Audio Capture Products.

🎧

Consumer Digital Audio Equipment

The AK5365VQ fits consumer digital audio equipment requiring two-channel, 24-bit conversion up to 96kHz. Its 32kHz-to-96kHz sampling range supports high-resolution playback, recording, and signal-capture functions, while the integrated selector, PGA, and ALC reduce the number of separate analog-routing and gain components. In a compact source-routing design, the converter can accept two audio sources, apply adjustable gain, and deliver data through I2C or SPI. Compared with a basic ADC, this integration simplifies analog control and supports consumer-recording formats above the 48kHz CD sampling rate.

🎙️

Digital Recording Systems

The AK5365VQ is appropriate for two-channel digital recorders that need 24-bit conversion at sampling rates from 32kHz through 96kHz. The programmable gain amplifier and automatic level control can simplify capture-level management in consumer recording equipment, while the audio selector supports source routing without a separate analog switch in every configuration. Its 44-LQFP package fits densely populated products, and I2C or SPI gives the recording controller flexible options for setup and data transfer. Clocking, input headroom, and ALC timing remain critical system-level checks.

🎤

Microphone Capture Front Ends

The AK5365VQ can serve as the conversion stage in a stereo microphone capture front end when the design requires 24-bit resolution, a maximum rate of 96kHz, and integrated gain management. Its PGA supports adjustable signal conditioning, and the ALC function can help maintain a useful recording level as microphone amplitudes change. A practical implementation should place the analog input network close to the converter, isolate it from digital switching currents, and verify the exact input impedance, supported gain range, and maximum allowable source voltage before choosing external microphone conditioning components.

📱

Portable Stereo Recorders

For a portable stereo recorder, the AK5365VQ combines a compact 44-LQFP package, two-channel conversion, and 96kHz maximum sampling in a function set tailored to high-resolution capture. The 10mm by 10mm package leaves room for the microphone front end, storage controller, and power-management circuitry in a dense enclosure. I2C is useful for a resource-constrained control link, while SPI can support a higher-throughput implementation where required. Battery and converter layout must prevent switching noise and ground current from degrading the analog input or clock signals.

🎚️

Audio Interface Products

The AK5365VQ can be integrated into a two-channel audio interface when the target product requires 24-bit data at sample rates above 48kHz. Its selector supports source routing, the PGA provides adjustable analog gain, and the ALC offers automatic level management for capture-oriented interfaces. I2C or SPI connectivity permits configuration by a USB or network audio controller. For a studio-class product, engineers should still compare clock-jitter sensitivity, dynamic range, distortion, and supported master-clock arrangements with the complete datasheet rather than relying only on nominal resolution and maximum sample rate.

🔧

Consumer Audio Capture Products

The AK5365VQ is well matched to consumer audio capture products that combine multiple analog sources with high-resolution digital recording. The integrated selector can route left and right inputs, the PGA supports level adjustment, and the ALC reduces manual gain intervention during changing source conditions. Its 24-bit, 96kHz capability supports higher-rate archival or mastering workflows. System integration should include stable analog and digital supplies, low-impedance reference routing, short input traces, and a host processor capable of receiving the converter's selected I2C or SPI format.

What is the AK5365VQ?
The AK5365VQ is a two-channel, 24-bit audio ADC with a maximum sampling rate of 96kHz. It integrates an audio selector, programmable gain amplifier, and automatic level control in a 44-LQFP package measuring 10mm by 10mm. The manufacturer describes it as a high-performance converter for consumer audio and digital recording products, using Enhanced Dual-Bit modulator architecture and providing I2C and SPI host interfaces.
What are the key specifications of AK5365VQ?
The AK5365VQ provides 24-bit resolution, 32kHz-to-96kHz sampling, two audio channels, I2C and SPI interfaces, and integrated selector, PGA, and ALC functions. Its digital supply range is 3V to 5.25V, while the analog supply range is 4.75V to 5.25V. The device is packaged as a 44-LQFP with a 10mm by 10mm body. These specifications position it for compact, high-resolution consumer audio and digital-recording designs.
Where can I download the AK5365VQ datasheet PDF?
The AK5365VQ datasheet can be reached through the linked AK5365VQ document page, which provides access to the manufacturer PDF and its technical material. Start with the general description, electrical characteristics, pin descriptions, application information, and interface sections. Use the manufacturer pin-description table when assigning PCB nets because the public search result does not expose all 44 terminal names, and verify supply sequencing and external-component recommendations before layout release.
Where can I find the AK5365VQ pinout?
The AK5365VQ pinout must be taken from the manufacturer datasheet because its 44 terminal names and exposed-pad connection are not included in the public product listing. The device is a 44-LQFP package with 0.5mm lead pitch and a 10mm by 10mm body. Assign the analog inputs, analog and digital supplies, grounds, clock, data interface, and control pins by their exact datasheet numbers rather than relying on a generic 44-LQFP symbol.
What voltage supplies does the AK5365VQ require?
The AK5365VQ uses separate digital and analog supply ranges of 3V to 5.25V and 4.75V to 5.25V, respectively. The digital side supports common low-voltage processor systems, while the analog side requires a nominal 5V-class rail. Keep the two supply networks appropriately decoupled, connect analog and digital ground according to the manufacturer layout guidance, and verify the maximum permitted voltage and startup sequence in the electrical-characteristics section before schematic approval.
What interfaces does the AK5365VQ support?
The AK5365VQ supports both I2C and SPI digital control interfaces. These interfaces connect the converter to an application processor, digital audio processor, or recording controller for configuration and data transfer. Interface selection can simplify firmware integration or reduce pin demand compared with a parallel audio ADC. The exact mode pins, supported read formats, clock relationships, and maximum bus rates must be confirmed in the manufacturer interface-control and timing sections.
Is the AK5365VQ suitable for digital recording equipment?
Yes, the AK5365VQ is specifically positioned for consumer audio and digital recording applications. Its 24-bit resolution supports high-resolution PCM workflows, and the 96kHz maximum sampling rate exceeds the 48kHz rate commonly used for CD audio. Integrated selector, PGA, and ALC functions can shorten the analog capture path, although signal-level headroom, clocking, grounding, and output-format requirements still need to be verified for each product.
What can replace the AK5365VQ?
No verified pin-to-pin replacement for the AK5365VQ was identified. The available cross-reference material points to generic substitution tools rather than naming a compatible 44-LQFP converter. A valid drop-in alternative would need the same 44-terminal footprint, compatible power rails, 24-bit or better conversion, supported 96kHz operation, equivalent analog input architecture, and usable I2C or SPI control. Do not treat a functionally similar ADC as a drop-in replacement without pin-level verification.
Is any Asahi Kasei device a direct drop-in replacement for AK5365VQ?
No same-manufacturer drop-in replacement was established for the AK5365VQ. Other AKM audio converters may provide related functions but can differ in channel count, resolution, package, clock architecture, analog frontend, and host interface. The closest engineering choice must therefore be checked against the complete pin list, application circuit, supply requirements, and register map. A different package or functional block arrangement would require a PCB and firmware redesign.
What is the best cross-brand equivalent for the AK5365VQ?
A cross-brand drop-in equivalent for the AK5365VQ cannot be recommended from the available information. The required candidate must preserve the 44-LQFP footprint, 24-bit conversion, 32kHz-to-96kHz operation, analog selector and gain functions, automatic level control, supply rails, and host-interface behavior. Because those details were not matched to a specific alternate MPN, use the Request a Quote form on this page to request obsolescence review or sourcing assistance for a redesign review.
When should I choose the AK5365VQ instead of a different audio ADC?
Choose the AK5365VQ when a design specifically calls for a two-channel, 24-bit converter reaching 96kHz with integrated selector, PGA, ALC, and I2C or SPI connectivity. It is particularly suitable for compact consumer audio and recording equipment where an integrated analog frontend reduces external circuitry. Select another converter when higher channel count, smaller packaging, different logic voltage, a parallel interface, or a guaranteed current lifecycle is required.
Is the AK5365VQ suitable for microphone preamplifier and capture systems?
The AK5365VQ can fit microphone capture systems that require 24-bit conversion, 32kHz-to-96kHz sampling, and integrated gain and level-control functions. Its two-channel architecture supports stereo capture, while the selector can simplify source routing in consumer recorders. The analog input topology, programmable gain range, input impedance, maximum source level, and ALC behavior must be checked in the datasheet to ensure compatibility with the microphone and capsule network.
How should power and decoupling be designed for the AK5365VQ?
Design the AK5365VQ with separate analog and digital supply routing, placing local high-frequency and bulk decoupling capacitance at the corresponding package pins. The analog rail accepts 4.75V to 5.25V, while the digital rail accepts 3V to 5.25V. Keep switching regulators, digital clocks, and high-current return paths away from the audio input and reference areas, and follow the manufacturer recommended capacitor values and grounding topology before finalizing the power tree.
How do I compare the AK5365VQ with another 24-bit audio ADC?
Compare the AK5365VQ with another 24-bit audio ADC by checking resolution, maximum sampling rate, channel count, analog frontend, programmable gain range, automatic level control, input selection, clock architecture, digital interface, supply rails, package, and lifecycle status. A simple 24-bit label is insufficient because the AK5365VQ also integrates selector, PGA, and ALC functions. The comparison table uses the confirmed target specifications and marks alternative-specific values as needing separate verification.
Where can I request a quote or check availability for AK5365VQ?
Use the Request a Quote form on this page to request current availability, lifecycle review, and quotation for the obsolete AK5365VQ. Because this product is identified as obsolete, sourcing should include a documented manufacturer change notification, authorized-channel traceability, date-code review, and inspection of the exact 44-LQFP package. Do not assume that any stock labeled AK5365VQ is an authorized new-production unit without supporting documentation.

엔지니어링 참조 데이터: AK5365VQ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AK5365VQ when the product requires two-channel, 24-bit audio conversion up to 96kHz and can benefit from an integrated selector, PGA, and ALC. It is particularly appropriate for consumer recorders, portable capture equipment, and compact audio interfaces whose controller supports I2C or SPI. The 44-LQFP package is larger than many compact codecs, so it may not suit space-constrained wearable products. Its obsolete lifecycle status also makes it unsuitable for new designs unless an authorized longevity program or managed inventory plan is available.

Do not select another converter solely because its headline resolution matches. Compare analog input topology, source-selection requirements, gain range, ALC behavior, clock architecture, reference requirements, interface protocol, register compatibility, and package pins. Because no alternative was verified as pin-to-pin compatible, changing converters should be treated as a redesign. For a new production program, prioritize an active device with documented lifecycle support, electrical performance matching the application, and a complete transition plan for any installed AK5365VQ population.

대체품과의 비교

파라미터 이 제품
Device Type 24-bit audio ADC
Brand Asahi Kasei Microdevices
Package 44-LQFP (10mm x 10mm)
Resolution 24 bit
Maximum Sampling Rate 96kHz
Sampling Rate Range 32kHz to 96kHz
Channel Count 2 channels
Digital Interface I2C and SPI
Digital Supply Voltage 3V to 5.25V
Analog Supply Voltage 4.75V to 5.25V
Integrated Frontend Selector, PGA, and ALC
Lifecycle Status Obsolete

주요 차별점

  • Integrated analog frontend reduces external signal-chain complexity (vs A basic 24-bit ADC without integrated selector, PGA, or ALC)
  • Supports high-resolution recording beyond the 48kHz CD rate (vs A 24-bit ADC limited to 48kHz sampling)
  • Offers two control and data interface choices (vs A parallel-interface audio ADC)

설계 노트

Place the AK5365VQ analog input, supply, and reference connections directly beside their corresponding pins. Keep the audio-selector and PGA input paths away from digital clock, SPI, and I2C traces, particularly the clock line. Use a continuous analog ground region beneath the converter and route return currents from digital outputs away from the audio-input reference point. A single-ended return that passes beneath the analog input network can convert switching current into input-voltage noise.

Treat the 3V-to-5.25V digital supply and 4.75V-to-5.25V analog supply as separate networks, even when both derive from one system source. Place the manufacturer-recommended local bypass capacitors at the relevant supply terminals with short ground returns. Keep the analog regulator free from high-ripple loads and place its output capacitor where it cannot inject recovery current into the audio input path. Verify startup behavior and the permissible sequencing relationships before connecting shared supply rails.

Route the converter clock and serial interface away from the microphone and line-level inputs, with a continuous ground reference beneath high-speed digital traces. Avoid routing I2C, SPI, and control buses beneath the analog input pins. If the selector connects to external sources, keep those routes away from clocks and switching-regulator nodes. A compact 44-LQFP layout can still couple adjacent pins electromagnetically, so preserve the datasheet's recommended component placement and component-orientation conventions.

Do not interpret the 24-bit resolution label as a guaranteed 24-bit system accuracy. The usable dynamic range also depends on the analog frontend, reference voltage, clock jitter, source impedance, gain setting, PCB grounding, and ALC configuration. Likewise, supporting 96kHz does not by itself guarantee the required dynamic range in every mode. Review the electrical characteristics for the selected gain and clock arrangement, and avoid changing ALC or PGA settings dynamically without checking their interaction.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The AK5365VQ is a consumer-audio mixed-signal IC, so AEC-Q100 automotive qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the available product information and remain unknown.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AK5365VQ datasheet AK5365VQ pinout AK5365VQ datasheet pdf AK5365VQ 24-bit 96kHz ADC AK5365VQ 44-LQFP AK5365VQ I2C SPI interface AK5365VQ PGA ALC AK5365VQ equivalent AK5365VQ replacement AK5365VQ price AK5365VQ stock Asahi Kasei AK5365VQ AK5365VQ digital recording ADC AK5365VQ obsolete lifecycle

관련 부품 & 용어

Asahi Kasei Microdevices AK5365VQ AK5365 24-bit ADC analog-to-digital converter audio converter mixed-signal integrated circuit data converter Enhanced Dual-Bit modulator programmable gain amplifier PGA automatic level control ALC audio selector I2C SPI 32kHz sampling 96kHz sampling consumer audio digital recording 44-LQFP LQFP package surface mount RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기