AKM (Asahi Kasei Microdevices)

AK5371AVQ USB Audio ADC, 16-bit, 48-LFQFP | AKM

MPN: AK5371AVQ ✗ انتهى عمره الإنتاجي
3 V to 3.6 V Vdss 48-LFQFP, 7 x 7 mm Package
الحد الأدنى للطلب: 1 |

AK5371AVQ نظرة عامة

The Asahi Kasei Microdevices AK5371AVQ is a two-channel 16-bit audio analog-to-digital converter with an integrated USB interface, USB transceiver, audio controller, endpoints, and digital audio processing. It supports sampling rates from 8 kHz to 48 kHz, operates from a 3 V to 3.6 V supply, and is housed in a 48-LFQFP 7 x 7 mm package.

A USB audio ADC is a mixed-signal interface IC that converts left and right analog audio inputs into digital PCM data for transmission over USB. The AK5371AVQ integrates the complete acquisition path needed by a USB audio peripheral: stereo analog-to-digital conversion, clocking, USB serial-interface handling, transceiver functions, endpoint management, and audio-class processing. This integration reduces the number of external interface components required in a USB microphone, headset, or compact audio capture design.

The converter provides 16-bit resolution across the 8 kHz to 48 kHz range. According to the AK5371A datasheet description, the signal-to-noise ratio reaches 84 dBA at a 44.1 kHz sampling rate with 0 dB gain. The device also includes mute and volume-control functions, two endpoints with FIFO buffering, and a low-power design intended for USB-powered or low-power embedded audio equipment.

USB-IF certification is identified for the AK5371A family, which is important when interoperability and USB audio-class behavior are central to product qualification. Integrating the USB transceiver and audio controller allows the converter to operate as a dedicated USB audio capture device rather than requiring a separate USB controller in the signal path. The resulting system can present a conventional stereo USB audio interface to a host computer, embedded system, or connected test equipment.

Typical uses include USB microphones, headset adapters, conference-audio peripherals, digital recording interfaces, and embedded audio acquisition modules. The 48-LFQFP package is suitable for compact boards, although its fine pitch and exposed thermal-pad arrangement require careful PCB layout. The 3 V to 3.6 V operating range also means that the device is normally paired with a regulated 3.3 V rail.

For a new design, check the manufacturer’s pin-description table, recommended analog input network, USB routing guidance, and clock requirements before assigning PCB tracks. Decoupling capacitors should be placed directly beside the appropriate supply and ground pins, while the USB data and differential-pair routing should preserve controlled impedance and minimize interference with the analog input section.

This page organizes the AK5371AVQ’s principal conversion, USB, supply, package, and application characteristics with practical replacement guidance and engineering-oriented design notes. It is intended to help designers evaluate integration requirements, board constraints, sample-rate support, and sourcing alternatives before committing a 48-LFQFP layout.

بدائل مباشرة لـ AK5371AVQ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع AK5371AVQ (نفس عامل الشكل والبصمة) — يختلف في Audio Processing, Sampling Rate.

AKM Semiconductor
Audio Processing: Integrated audio-class processing
Sampling Rate: 48 kHz
قارن مع AK5371AVQ →

AK5371A

✅ بديل مباشر
📦 48-LFQFP (7x7)
Base ordering code for the same 16-bit, 2-channel, 8-48 kHz USB ADC architecture; final temperature or packing suffix must be matched

📋 بديل مرجعي (غير موجود في الكتالوج)

AK5373EQ

✅ بديل مباشر
AKM Semiconductor
📦 48-LFQFP (7x7)
Stereo A/D converter with USB interface · 24 bit · 2 channels · 48 kHz · USB 2.0 · USB serial interface engine and USB transceiver · Integrated audio-class processing · 3 V to 3.6 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

AK5371AVQ الحدود القصوى والخصائص الكهربائية

Converter Type Stereo audio ADC with USB interface
الدقة 16 bit
Number of Channels 2 channels
معدل أخذ العينات 8 kHz to 48 kHz
Signal-to-Noise Ratio 84 dBA at 44.1 kHz and 0 dB gain
جهد التغذية 3 V to 3.6 V
USB Interface USB 1.1-compatible device interface
USB Transceiver Integrated
Audio Controller Integrated USB Audio Controller
USB Serial Interface Engine Integrated
Endpoints 2 endpoints with FIFO
Audio Processing Mute and volume control
العلبة 48-LFQFP, 7 x 7 mm
نوع التركيب Surface mount
USB-IF Certification Certified

دليل تكوين أطراف AK5371AVQ 48-lfqfp, 7 x 7 mm

تكوين الأطراف لـ AK5371AVQ (حزمة 48-lfqfp, 7 x 7 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 48-lfqfp, 7 x 7 mm لـ AK5371AVQ

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AK5371AVQ.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

AK5371AVQ مناسب لـ 6 التطبيقs: USB Microphone, USB Headset Interface, Conference Audio Peripheral, Portable Audio Recorder, Digital Audio Test Interface, Industrial Audio Sensor Gateway.

🎙️

USB Microphone

The AK5371AVQ fits a USB microphone because it combines two 16-bit conversion channels with an integrated USB transceiver and USB Audio Controller in one 48-LFQFP device. Its 8 kHz to 48 kHz sampling range covers speech and conventional digital-audio rates, while the specified 84 dBA signal-to-noise ratio at 44.1 kHz provides a clear performance target for capture circuitry. The microphone’s analog front end can feed the converter directly, provided the board provides suitable biasing, anti-alias filtering, grounding, and ESD protection. Integrating USB audio handling eliminates a separate USB interface controller and reduces the amount of digital routing around the converter.

🎧

USB Headset Interface

The AK5371AVQ is suitable for a USB headset capture path because it supports two channels, 16-bit conversion, and sampling rates through 48 kHz while providing mute and volume-control functions. The stereo input structure allows a single converter to handle microphone and auxiliary audio inputs when the analog front end supports the required levels. Its integrated USB audio controller and transceiver reduce external interface complexity, making the device useful in wired and compact wireless-headset dongles. The 3 V to 3.6 V supply range is compatible with regulated 3.3 V USB designs, subject to the exact current and decoupling requirements.

🏢

Conference Audio Peripheral

The AK5371AVQ can form the audio-capture core of a conference peripheral or USB speakerphone. Its stereo 16-bit converter captures two channels at up to 48 kHz, and the integrated USB controller presents standard audio data to a host without requiring a separate USB bridge. The 84 dBA signal-to-noise specification at 44.1 kHz gives designers a measurable baseline for preamp and microphone-chain performance. Mute and volume control simplify peripheral feature implementation, while the single-package integration supports compact desktop and portable products. Analog gain, input protection, grounding, and host-side volume behavior remain important system-level considerations.

📱

Portable Audio Recorder

The AK5371AVQ is appropriate for portable USB audio recorders requiring stereo capture and direct host connectivity. Sampling rates from 8 kHz to 48 kHz support voice recording, playback-oriented capture, and multichannel monitoring, while the low-power 3.3 V operating class suits battery-powered accessories. Integrated USB transceiver and audio-controller functions reduce the component count compared with a discrete ADC and USB interface design. Product designers should still account for analog input scaling, clock integrity, ESD protection, and supply noise. The 48-LFQFP footprint requires fine-pitch layout but remains practical for compact multi-layer boards.

🔧

Digital Audio Test Interface

The AK5371AVQ can serve as the acquisition element in a USB-based digital audio test interface. Its two 16-bit channels and 48 kHz maximum rate cover measurements involving microphones, line-level sources, and small transducers, while the USB interface simplifies connection to a host for capture and analysis. The specified 84 dBA signal-to-noise ratio at 44.1 kHz provides a useful reference when evaluating the complete analog path rather than the converter alone. For repeatable test results, use controlled grounding, low-noise supply arrangements, defined input attenuation, and calibration paths that are separate from the capture channels.

🏭

Industrial Audio Sensor Gateway

The AK5371AVQ can support an industrial audio sensor gateway that captures two analog audio channels and forwards them over USB. Its 16-bit conversion, 8-48 kHz range, and integrated USB audio handling make it useful for equipment monitoring, acoustic inspection, and machine-condition monitoring. The 3 V to 3.6 V operating range integrates naturally into a 3.3 V embedded power architecture. For industrial deployment, protect the analog inputs from surge and ESD events, maintain a quiet ground partition between analog and USB sections, and route the USB differential pair away from sensitive input traces. Host software must support the device’s USB Audio Class implementation.

ملخص المنتجات الموصى بها

AK5371A Same-family USB audio ADC يُستخدم في: USB Microphone, USB Headset Interface, Conference Audio Peripheral, Portable Audio Recorder, Digital Audio Test Interface, Industrial Audio Sensor Gateway
What is the AK5371AVQ?
The AK5371AVQ is a two-channel 16-bit audio ADC with an integrated USB interface. It combines stereo analog-to-digital conversion, a USB transceiver, USB audio controller, serial-interface engine, two endpoints, and mute and volume control in a 48-LFQFP 7 x 7 mm package. According to the AK5371A manufacturer datasheet description, the converter supports sampling rates from 8 kHz to 48 kHz.
What are the key specifications of AK5371AVQ that engineers should know?
The AK5371AVQ provides 16-bit resolution, two audio channels, and sampling rates from 8 kHz to 48 kHz. Its specified signal-to-noise ratio reaches 84 dBA at 44.1 kHz with 0 dB gain, while its operating supply range is 3 V to 3.6 V. The integrated USB transceiver and audio controller eliminate the need for a separate USB interface IC in a dedicated stereo audio-capture design.
Where can I download the AK5371AVQ datasheet PDF?
The AK5371AVQ datasheet can be accessed through the linked manufacturer-document archive and the official PDF link listed on this page. The document is titled “AK5371AVQ 2ch A/D Converter with USB I/F” and identifies the AK5371A family as a USB-IF-certified stereo converter with a USB audio controller, USB transceiver, 16-bit conversion, two endpoints, and mute and volume control.
What is the AK5371AVQ sampling rate and resolution?
The AK5371AVQ converts two audio channels at up to 16-bit resolution over an 8 kHz to 48 kHz sampling-rate range. Its headline performance figure is 84 dBA signal-to-noise ratio when operating at 44.1 kHz with 0 dB gain. These figures make it suitable for USB voice, headset, microphone, and compact stereo capture products using the USB Audio Class.
What supply voltage does the AK5371AVQ require?
The AK5371AVQ operates from a 3 V to 3.6 V supply. The manufacturer product information identifies the analog and digital supply range as 3 V to 3.6 V, which places the device in a 3.3 V design class. Use the manufacturer pin-description and application-circuit tables to identify the required supply pins, decoupling locations, and any analog or digital supply partitioning.
Where can I buy AK5371AVQ online and what is its lead time?
Use the Request a Quote form on this page to request current AK5371AVQ availability, unit pricing, minimum order quantity, and production lead time. The part is listed as obsolete in current marketplace product information, so availability may be limited to existing inventory or scheduled supply. A written quote is the appropriate way to confirm the exact suffix, delivery quantity, and traceability requirements.
What is the price of AK5371AVQ?
Current AK5371AVQ pricing should be requested through the Request a Quote form on this page. The device is listed as obsolete, so its commercial terms may depend on remaining factory inventory, packaging condition, and order quantity. Submit the required quantity and purchase-order details with the request so the quotation can identify the exact AK5371AVQ suffix and current supply position.
Is AK5371AVQ in stock?
AK5371AVQ inventory should be confirmed through the Request a Quote form on this page because the product is marked obsolete and available quantities can change quickly. Marketplace listings indicate historical and residual stock, but they do not establish a stable production supply. Request the quantity, target date, and packaging condition needed for a valid availability response.
What is the best drop-in replacement for AK5371AVQ?
AK5371A is the closest same-family replacement candidate because it is the base device associated with the AK5371AVQ ordering code and retains the 48-LFQFP 7 x 7 mm architecture. Confirm the exact suffix, pin configuration, USB descriptors, and production status before substitution. No five-part drop-in set could be established from the available cross-reference records, so functional alternatives with different packages or USB implementations should not be treated as direct replacements.
Can AK5371A replace AK5371AVQ?
AK5371A is the most plausible same-family drop-in candidate for AK5371AVQ because it is identified as the base AK5371A converter associated with this ordering code. The device retains the two-channel 16-bit USB ADC architecture and 48-LFQFP 7 x 7 mm package. Final interchangeability still depends on matching the exact pinout, USB descriptor implementation, operating-temperature grade, and intended supply conditions.
AK5371AVQ vs AK5373EQ: which USB audio converter is better?
The AK5371AVQ is the better selection when a design specifically requires the AK5371A 16-bit, two-channel USB ADC function at sampling rates from 8 kHz to 48 kHz. AK5373EQ is a related AKM converter, but it is not automatically interchangeable because its voltage, power, and package details must be confirmed. Use the AK5371AVQ when its established 48-LFQFP implementation and USB-audio feature set match the target product.
When should I choose AK5371AVQ over AK5371A?
Choose the fully specified AK5371AVQ ordering code when procurement requires that exact suffix and the associated temperature, quality, or packaging conditions. Use the base AK5371A designation when it is the documented manufacturer base part for the required grade and the supplier confirms the final order code. Both identify the same core 16-bit stereo USB ADC family, but ordering-code verification is essential for legacy production.
Is AK5371AVQ suitable for a USB microphone?
The AK5371AVQ is suitable for a USB microphone because it integrates stereo 16-bit conversion, a USB transceiver, a USB Audio Controller, and USB audio-class processing. Its 8 kHz to 48 kHz sampling range covers voice and standard digital-audio rates, while the 84 dBA signal-to-noise specification supports clean capture at 44.1 kHz. Analog conditioning, microphone bias, grounding, and USB signal integrity remain board-level design responsibilities.
What is the AK5371AVQ pinout?
The AK5371AVQ uses a 48-LFQFP 7 x 7 mm package, but its complete numbered pin assignment is not reproduced on this page. Use the pin-description table in the AK5371A manufacturer datasheet when assigning analog inputs, digital supply, analog supply, USB data lines, clock, control, and ground pins. The package image provides orientation guidance, while the datasheet must remain the authoritative source for every electrical connection.
What power and thermal considerations apply to AK5371AVQ?
The AK5371AVQ is a low-power 3.3 V-class USB audio converter, but exact dissipation and junction-temperature limits require the manufacturer’s electrical characteristics and recommended layout. Estimated: power dissipation equals the measured supply current multiplied by 3.3 V; divide that value by the package thermal resistance and add ambient temperature to estimate junction rise. Place decoupling capacitors at the supply pins and preserve copper area around the exposed pad.

بيانات مرجعية هندسية لـ AK5371AVQ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the AK5371AVQ for a legacy USB audio-capture design that requires two 16-bit channels, sampling from 8 kHz to 48 kHz, and integration of the USB transceiver and USB Audio Controller in one 48-LFQFP package. It is especially suitable for USB microphones, headset interfaces, conference peripherals, and compact recorders using a regulated 3.3 V supply. Select AK5371A when it is the documented base ordering code for the required grade and packaging, while confirming the exact suffix before procurement. Consider AK5373EQ only after checking its pinout, USB descriptors, electrical limits, and power requirements against the existing board. Because AK5371AVQ is marked obsolete and the available cross-reference records identify only two related candidates, new designs should also evaluate the current AKM USB audio portfolio rather than assuming a one-for-one replacement is available.

المقارنة مع البدائل

المعامل هذا المنتج AK5371A AK5373EQ
Package 48-LFQFP (7x7) 48-LFQFP (7x7) 48-LFQFP (7x7)
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices Asahi Kasei Microdevices
Function Stereo audio ADC with USB interface Stereo audio ADC with USB interface Related USB audio ADC

أبرز الفروقات

  • Higher signal-to-noise specification for the AK5371A family (مقابلAK5373EQ)
  • Exact legacy ordering identity (مقابلAK5371A)
  • Integrated USB audio acquisition (مقابلDiscrete ADC plus USB controller design)

ملاحظات التصميم

Route USB D+ and D- as a controlled-impedance differential pair over a continuous reference plane, and keep the pair away from the analog input traces. Place the USB connection protection components close to the connector. The AK5371AVQ integrates the USB transceiver, but external layout quality still determines signal integrity and susceptibility to radiated noise.

Separate the analog input section from digital and USB return currents as far as practical. Use short, shielded analog traces, place anti-alias or input-network components near the relevant pins, and maintain a continuous low-impedance ground path beneath the converter. Apply the manufacturer’s reference layout and pin-description table for exact component placement and exposed-pad connection.

Provide a stable 3.3 V supply within the 3 V to 3.6 V operating range and place the recommended bypass capacitors directly at the supply pins. Estimated: supply current changes with conversion activity, so measure the operating current in the intended audio mode rather than assuming the quiescent value. Verify startup sequencing, USB bus-powered current limits, and analog noise at the converter input.

Do not substitute a converter merely because it supports USB audio. Confirm the complete numbered pinout, endpoint arrangement, USB descriptors, clock requirements, analog input levels, and supply sequencing. In particular, verify whether an exposed pad must connect to ground and whether the replacement uses the same pin numbering; package dimensions alone do not establish drop-in compatibility.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

USB-IF certification is identified for the AK5371A family. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established by the available product information.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

AK5371AVQ datasheet AK5371AVQ datasheet pdf AK5371AVQ pinout AK5371AVQ specifications AK5371AVQ replacement AK5371AVQ equivalent AK5371AVQ cross reference AK5371AVQ price AK5371AVQ stock AK5371AVQ 48-LFQFP AK5371AVQ USB microphone ADC AK5371AVQ vs AK5373EQ

المكونات والمصطلحات ذات الصلة

Asahi Kasei Microdevices AK5371AVQ AK5371A AK5373EQ USB audio ADC analog-to-digital converter mixed-signal interface IC USB Audio Controller USB transceiver USB serial interface engine USB Audio Class USB-IF certification PCM audio 16-bit ADC stereo ADC 48-LFQFP LQFP package family surface-mount package 8 kHz to 48 kHz sampling 84 dBA signal-to-noise ratio 3 V to 3.6 V supply USB microphone USB headset interface digital audio recorder
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر