AK5371AVQ USB Audio ADC, 16-bit, 48-LFQFP | AKM
MPN: AK5371AVQ ✗ סוף ייצורAK5371AVQ סקירה
A USB audio ADC is a mixed-signal interface IC that converts left and right analog audio inputs into digital PCM data for transmission over USB. The AK5371AVQ integrates the complete acquisition path needed by a USB audio peripheral: stereo analog-to-digital conversion, clocking, USB serial-interface handling, transceiver functions, endpoint management, and audio-class processing. This integration reduces the number of external interface components required in a USB microphone, headset, or compact audio capture design.
The converter provides 16-bit resolution across the 8 kHz to 48 kHz range. According to the AK5371A datasheet description, the signal-to-noise ratio reaches 84 dBA at a 44.1 kHz sampling rate with 0 dB gain. The device also includes mute and volume-control functions, two endpoints with FIFO buffering, and a low-power design intended for USB-powered or low-power embedded audio equipment.
USB-IF certification is identified for the AK5371A family, which is important when interoperability and USB audio-class behavior are central to product qualification. Integrating the USB transceiver and audio controller allows the converter to operate as a dedicated USB audio capture device rather than requiring a separate USB controller in the signal path. The resulting system can present a conventional stereo USB audio interface to a host computer, embedded system, or connected test equipment.
Typical uses include USB microphones, headset adapters, conference-audio peripherals, digital recording interfaces, and embedded audio acquisition modules. The 48-LFQFP package is suitable for compact boards, although its fine pitch and exposed thermal-pad arrangement require careful PCB layout. The 3 V to 3.6 V operating range also means that the device is normally paired with a regulated 3.3 V rail.
For a new design, check the manufacturer’s pin-description table, recommended analog input network, USB routing guidance, and clock requirements before assigning PCB tracks. Decoupling capacitors should be placed directly beside the appropriate supply and ground pins, while the USB data and differential-pair routing should preserve controlled impedance and minimize interference with the analog input section.
This page organizes the AK5371AVQ’s principal conversion, USB, supply, package, and application characteristics with practical replacement guidance and engineering-oriented design notes. It is intended to help designers evaluate integration requirements, board constraints, sample-rate support, and sourcing alternatives before committing a 48-LFQFP layout.
חלופות תחליף ישיר עבור AK5371AVQ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם AK5371AVQ (אותו גורם צורה וטביעת רגל) — שונים ב Audio Processing, Sampling Rate.
AK5371A
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
AK5373EQ
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←AK5371AVQ דירוגים מרביים ומאפיינים חשמליים
| Converter Type | Stereo audio ADC with USB interface |
| רזולוציה | 16 bit |
| Number of Channels | 2 channels |
| קצב דגימה | 8 kHz to 48 kHz |
| Signal-to-Noise Ratio | 84 dBA at 44.1 kHz and 0 dB gain |
| מתח אספקה | 3 V to 3.6 V |
| USB Interface | USB 1.1-compatible device interface |
| USB Transceiver | Integrated |
| Audio Controller | Integrated USB Audio Controller |
| USB Serial Interface Engine | Integrated |
| Endpoints | 2 endpoints with FIFO |
| Audio Processing | Mute and volume control |
| מארז | 48-LFQFP, 7 x 7 mm |
| סוג הרכבה | Surface mount |
| USB-IF Certification | Certified |
מדריך תצורת פינים של AK5371AVQ 48-lfqfp, 7 x 7 mm
תצורת פינים עבור AK5371AVQ (מארזת 48-lfqfp, 7 x 7 mm). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור AK5371AVQ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
AK5371AVQ מתאים עבור 6 יישוםs: USB Microphone, USB Headset Interface, Conference Audio Peripheral, Portable Audio Recorder, Digital Audio Test Interface, Industrial Audio Sensor Gateway.
USB Microphone
The AK5371AVQ fits a USB microphone because it combines two 16-bit conversion channels with an integrated USB transceiver and USB Audio Controller in one 48-LFQFP device. Its 8 kHz to 48 kHz sampling range covers speech and conventional digital-audio rates, while the specified 84 dBA signal-to-noise ratio at 44.1 kHz provides a clear performance target for capture circuitry. The microphone’s analog front end can feed the converter directly, provided the board provides suitable biasing, anti-alias filtering, grounding, and ESD protection. Integrating USB audio handling eliminates a separate USB interface controller and reduces the amount of digital routing around the converter.
מומלץ
USB Headset Interface
The AK5371AVQ is suitable for a USB headset capture path because it supports two channels, 16-bit conversion, and sampling rates through 48 kHz while providing mute and volume-control functions. The stereo input structure allows a single converter to handle microphone and auxiliary audio inputs when the analog front end supports the required levels. Its integrated USB audio controller and transceiver reduce external interface complexity, making the device useful in wired and compact wireless-headset dongles. The 3 V to 3.6 V supply range is compatible with regulated 3.3 V USB designs, subject to the exact current and decoupling requirements.
מומלץ
Conference Audio Peripheral
The AK5371AVQ can form the audio-capture core of a conference peripheral or USB speakerphone. Its stereo 16-bit converter captures two channels at up to 48 kHz, and the integrated USB controller presents standard audio data to a host without requiring a separate USB bridge. The 84 dBA signal-to-noise specification at 44.1 kHz gives designers a measurable baseline for preamp and microphone-chain performance. Mute and volume control simplify peripheral feature implementation, while the single-package integration supports compact desktop and portable products. Analog gain, input protection, grounding, and host-side volume behavior remain important system-level considerations.
מומלץ
Portable Audio Recorder
The AK5371AVQ is appropriate for portable USB audio recorders requiring stereo capture and direct host connectivity. Sampling rates from 8 kHz to 48 kHz support voice recording, playback-oriented capture, and multichannel monitoring, while the low-power 3.3 V operating class suits battery-powered accessories. Integrated USB transceiver and audio-controller functions reduce the component count compared with a discrete ADC and USB interface design. Product designers should still account for analog input scaling, clock integrity, ESD protection, and supply noise. The 48-LFQFP footprint requires fine-pitch layout but remains practical for compact multi-layer boards.
מומלץ
Digital Audio Test Interface
The AK5371AVQ can serve as the acquisition element in a USB-based digital audio test interface. Its two 16-bit channels and 48 kHz maximum rate cover measurements involving microphones, line-level sources, and small transducers, while the USB interface simplifies connection to a host for capture and analysis. The specified 84 dBA signal-to-noise ratio at 44.1 kHz provides a useful reference when evaluating the complete analog path rather than the converter alone. For repeatable test results, use controlled grounding, low-noise supply arrangements, defined input attenuation, and calibration paths that are separate from the capture channels.
מומלץ
Industrial Audio Sensor Gateway
The AK5371AVQ can support an industrial audio sensor gateway that captures two analog audio channels and forwards them over USB. Its 16-bit conversion, 8-48 kHz range, and integrated USB audio handling make it useful for equipment monitoring, acoustic inspection, and machine-condition monitoring. The 3 V to 3.6 V operating range integrates naturally into a 3.3 V embedded power architecture. For industrial deployment, protect the analog inputs from surge and ESD events, maintain a quiet ground partition between analog and USB sections, and route the USB differential pair away from sensitive input traces. Host software must support the device’s USB Audio Class implementation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור AK5371AVQ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | AK5371A | AK5373EQ |
|---|---|---|---|
| Package | 48-LFQFP (7x7) | 48-LFQFP (7x7) | 48-LFQFP (7x7) |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Function | Stereo audio ADC with USB interface | Stereo audio ADC with USB interface | Related USB audio ADC |
מבדילים עיקריים
- Higher signal-to-noise specification for the AK5371A family (לעומתAK5373EQ)
- Exact legacy ordering identity (לעומתAK5371A)
- Integrated USB audio acquisition (לעומתDiscrete ADC plus USB controller design)
הערות תכנון
Route USB D+ and D- as a controlled-impedance differential pair over a continuous reference plane, and keep the pair away from the analog input traces. Place the USB connection protection components close to the connector. The AK5371AVQ integrates the USB transceiver, but external layout quality still determines signal integrity and susceptibility to radiated noise.
Separate the analog input section from digital and USB return currents as far as practical. Use short, shielded analog traces, place anti-alias or input-network components near the relevant pins, and maintain a continuous low-impedance ground path beneath the converter. Apply the manufacturer’s reference layout and pin-description table for exact component placement and exposed-pad connection.
Provide a stable 3.3 V supply within the 3 V to 3.6 V operating range and place the recommended bypass capacitors directly at the supply pins. Estimated: supply current changes with conversion activity, so measure the operating current in the intended audio mode rather than assuming the quiescent value. Verify startup sequencing, USB bus-powered current limits, and analog noise at the converter input.
Do not substitute a converter merely because it supports USB audio. Confirm the complete numbered pinout, endpoint arrangement, USB descriptors, clock requirements, analog input levels, and supply sequencing. In particular, verify whether an exposed pad must connect to ground and whether the replacement uses the same pin numbering; package dimensions alone do not establish drop-in compatibility.
מידע על תאימות
USB-IF certification is identified for the AK5371A family. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established by the available product information.