APA450-FG144I - 450K Gate, 180MHz FPGA | Microchip
MPN: APA450-FG144I ✓ نشطAPA450-FG144I نظرة عامة
An FPGA is a programmable-logic semiconductor whose internal gates and interconnect can be configured after manufacture to implement digital functions. Within the product hierarchy, the APA450 belongs to the ProASICPLUS family of Flash-based FPGAs. A 144-pin FBGA package provides a compact surface-mount solution for high-density boards, while 100 user I/O allows the device to connect directly to external data buses, control signals, memory interfaces, and communication peripherals.
Key device characteristics include 450K system gates, operation up to 180 MHz, 100 user I/O, and 2.5 V device technology. The Flash-based architecture provides nonvolatile configuration and supports reprogramming during development, qualification, and field updates. These characteristics make the APA450-FG144I useful where designers need more logic capacity than a small programmable-logic device but do not require the very high gate density and performance of the largest FPGA families.
The APA450-FG144I belongs to the same ProASICPLUS device family identified in the manufacturer product-page data. Its architecture combines configurable logic blocks, programmable interconnect, dedicated user I/O, and embedded memory resources for digital designs. Because the device is identified as a ProASICPLUS FPGA and its configuration technology is Flash-based, the design flow is centered on vendor-supported synthesis, placement, routing, programming, and verification tools rather than on a permanently fixed logic netlist.
Typical applications include industrial control modules, communications interfaces, network equipment, test and measurement systems, embedded controllers, signal conditioning, and general-purpose digital signal control. The 100-I/O arrangement is particularly useful for systems requiring several parallel buses and control interfaces. The 144-pin FBGA footprint also helps reduce board area compared with larger-lead-count packages, but it demands careful PCB layout, inspection, and assembly control.
The primary design consideration is package and tooling discipline. Use the APA450-FG144I pinout, differential-pair rules, power-decoupling guidance, and programming information in the manufacturer documentation before finalizing the PCB. Validate the complete design with the supported timing, simulation, and in-circuit programming workflow, especially when the board uses high-speed interfaces or a dense BGA escape arrangement.
This product page combines the exact APA450-FG144I identity, package information, documented device ratings, sourcing context, and engineering guidance into a practical selection reference. It also distinguishes the target industrial ordering code from closely related ProASICPLUS variants so engineers can determine whether a proposed substitution preserves package, I/O, temperature, and configuration requirements before approving a drop-in replacement.
بدائل مباشرة لـ APA450-FG144I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع APA450-FG144I (نفس عامل الشكل والبصمة) — يختلف في Configuration Technology, Device Type, Package.
APA450-FG144I-B1
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
APA450-FG144
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←APA450-FGG144I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
APA450-FG144I الحدود القصوى والخصائص الكهربائية
| Device Type | ProASICPLUS field-programmable gate array (FPGA) |
| System Gates | 450K gates |
| Maximum Operating Frequency | 180 MHz |
| Process Technology | 0.22 um |
| Core Supply Voltage | 2.5 V |
| User I/O Count | 100 I/O |
| العلبة | 144-pin FBGA |
| Configuration Technology | Flash-based nonvolatile reprogrammable configuration |
| Programmable Logic Type | FPGA |
| نوع التركيب | Surface mount |
| Product Family | ProASICPLUS |
| Temperature Grade | Industrial temperature grade indicated by the I ordering suffix |
دليل تكوين أطراف APA450-FG144I 144-pin fbga
تكوين الأطراف لـ APA450-FG144I (حزمة 144-pin fbga). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ APA450-FG144I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
APA450-FG144I مناسب لـ 6 التطبيقs: Industrial Control Logic, Communications Interface, Network Equipment Control, Test and Measurement Instrumentation, Embedded Data Acquisition, Programmable Signal Conditioning.
Industrial Control Logic
The APA450-FG144I fits industrial control modules that need more programmable logic than a small CPLD while retaining a compact 144-pin FBGA footprint. Its 450K system gates can support parallel control paths, state machines, sequencing logic, and interface adaptation, while the 100 user I/O provide connections to sensors, actuators, memory, and fieldbus transceivers. The Flash-based configuration is useful when the controller must retain its programmed logic through power loss. During design, engineers should establish I/O-direction assignments, define voltage-domain constraints, and verify timing with the ProASICPLUS tool flow. Industrial suitability should be confirmed against the manufacturer’s complete environmental and electrical specifications rather than inferred solely from the industrial ordering suffix.
موصى به
Communications Interface
The APA450-FG144I can implement protocol conversion, framing, buffering, and control functions in communications interface equipment. Its 450K system gates and 100 user I/O allow multiple parallel channels to coexist without requiring several small programmable devices, while operation up to 180 MHz provides useful timing margin for synchronous control logic. The nonvolatile Flash configuration allows field-updatable interfaces to retain their programmed function after power is removed. Engineers should use the manufacturer’s timing and I/O guidance to establish compliant pin assignments, clocking, and termination. This device is best suited to glue logic, protocol engines, and system-specific interface control rather than replacing a high-performance digital signal processor.
موصى به
Network Equipment Control
The APA450-FG144I suits line-card, switch, and gateway designs requiring deterministic programmable logic for packet classification, buffering control, status aggregation, and backplane management. Its 450K system gates support parallel datapath control and multiple finite-state machines, while 100 user I/O allow the FPGA to interface with memory, PHY devices, LEDs, and management processors. The compact FBGA package reduces board footprint compared with larger lead-count programmable devices. A practical design should reserve pins for configuration access, implement clean power and ground partitioning, and validate interface timing across the intended system clock range. The result is a flexible implementation for low- and medium-complexity networking control functions.
موصى به
Test and Measurement Instrumentation
The APA450-FG144I is appropriate for programmable timing, sequencing, and signal-routing logic used in test and measurement instruments. Its 450K system gates can accommodate multiple control channels, acquisition sequencing, pattern generation, and instrument-status logic, while 100 user I/O provide flexible connections to converters, relays, and front-end circuits. Flash-based configuration is valuable in laboratory equipment because the programmed test sequence can persist between sessions. Engineers should define deterministic clock domains and use the manufacturer’s timing tools to close timing for data-control paths. This application benefits from the device’s reprogrammability, allowing the same board design to support different measurement procedures and firmware revisions.
موصى به
Embedded Data Acquisition
The APA450-FG144I can coordinate sensors, converters, memory devices, and data-processing logic in embedded acquisition systems. Its 450K system gates provide enough capacity for acquisition sequencing, digital filtering support, trigger logic, and buffer-management functions, while the 100-I/O arrangement supports multiple converter data buses and control signals. Nonvolatile Flash configuration allows the acquisition behavior to remain defined after power cycling. The key design consideration is partitioning deterministic acquisition paths from slower supervisory logic and keeping the BGA escape routing manageable. Use the pinout and layout guidance in the manufacturer documentation, then validate signal integrity and timing with the intended converters and memory interfaces.
موصى به
Programmable Signal Conditioning
The APA450-FG144I is useful for programmable logic around analog front ends, where channel selection, calibration tables, gain sequencing, and data routing require flexible digital control. The 450K system gates support multiple coordinated control paths, and 100 user I/O provide direct connections to converters, multiplexers, DACs, and status logic. Because the configuration is Flash-based, calibration sequences and control tables can be retained in the FPGA. Engineers should separate sensitive analog and return paths from high-speed digital routing, define ground references carefully, and verify all supported I/O standards against the electrical tables. This configuration allows product variants and calibration sequences to be changed without changing the PCB.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ APA450-FG144I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | APA450-FG144I-B1 | APA450-FG144 | APA450-FGG144I |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-pin FBGA | 144-pin FBGA | 144-pin FBGA | 144-pin FBGA |
| Device Type | ProASICPLUS FPGA | ProASICPLUS FPGA | ProASICPLUS FPGA | ProASICPLUS FPGA |
| System Gates | 450K gates | 450K gates | 450K gates | 450K gates |
| Maximum Operating Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| User I/O Count | 100 I/O | 100 I/O | 100 I/O | 100 I/O |
| Configuration Technology | Flash-based nonvolatile | Flash-based nonvolatile | Flash-based nonvolatile | Flash-based nonvolatile |
| Process Technology | 0.22 um | 0.22 um | 0.22 um | 0.22 um |
| Core Supply Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Ordering-Code Qualification | APA450-FG144I industrial ordering code | B1 suffix requires manufacturer ordering-table confirmation | Non-I ordering code requires temperature-grade confirmation | FGG suffix requires package-ordering-code confirmation |
أبرز الفروقات
- Exact APA450 family identity with 450K system gates (مقابلAPA450-FG144)
- Industrial ordering configuration (مقابلAPA450-FGG144I)
- Nonvolatile Flash-based configuration (مقابلAPA450-FG144I-B1)
ملاحظات التصميم
Treat the APA450-FG144I as a dense 144-pin BGA and follow the manufacturer’s ball-map and escape-routing guidance before assigning tracks. Keep power and ground distribution on dedicated layers where the recommended stack-up permits, use via-in-pad only when the assembly process and reliability plan support it, and avoid routing high-speed signals through split power or ground planes. Confirm pad dimensions and solder-mask policy against the exact package drawing rather than relying on a generic FBGA footprint.
Separate the device’s core, I/O, and auxiliary supply requirements according to the manufacturer’s recommended schematic and decoupling tables. Place the required bulk and high-frequency capacitors at the associated power balls with the shortest practical current path. Validate power-up sequencing, voltage tolerances, and I/O-state behavior during reset. Because the published listing identifies a 2.5 V core technology but does not provide complete rail requirements, do not derive the complete power tree from that single value.
Assign clock, data, configuration, and serial programming interfaces before routing the BGA escape fanout. Use the ProASICPLUS timing engine to constrain all relevant clock domains and I/O timing, and reserve implementation resources for probing, debugging, and configuration access. Maintain continuous return paths beneath high-speed signals, and apply the manufacturer’s I/O-standard and slew recommendations to external interfaces to reduce ringing, overshoot, and setup-time failures.
Do not approve a replacement solely from the APA450 family name or BGA package description. Verify the exact ordering suffix, temperature grade, core voltage, I/O voltage domains, speed grade, exposed connections, programming file, and BGA ball map. Also check whether an existing board is designed for a cold orPb-free assembly process. These checks prevent a mechanically similar replacement from introducing electrical, thermal, or configuration incompatibilities.
معلومات الامتثال
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the manufacturer or distributor information. The APA450-FG144I is categorized as an industrial-ordering code, but that ordering suffix alone is not treated as formal AEC-Q100 evidence.