Microchip Technology

APA450-FG144I - 450K Gate, 180MHz FPGA | Microchip

MPN: APA450-FG144I ✓ فعال
2.5 V Vdss 144-pin FBGA Package 180 MHz Speed
MOQ: 1 |

APA450-FG144I جائزہ

The Microchip Technology APA450-FG144I is a ProASICPLUS field-programmable gate array with 450K system gates, a maximum operating frequency of 180 MHz, and 100 user I/O in a 144-pin FBGA package. It combines programmable logic density with nonvolatile Flash configuration, allowing the design to retain its programmed configuration without a separate configuration PROM. The device is positioned for industrial, communications, networking, embedded control, and general programmable-logic applications requiring a moderate combination of logic capacity, I/O, and device performance.

An FPGA is a programmable-logic semiconductor whose internal gates and interconnect can be configured after manufacture to implement digital functions. Within the product hierarchy, the APA450 belongs to the ProASICPLUS family of Flash-based FPGAs. A 144-pin FBGA package provides a compact surface-mount solution for high-density boards, while 100 user I/O allows the device to connect directly to external data buses, control signals, memory interfaces, and communication peripherals.

Key device characteristics include 450K system gates, operation up to 180 MHz, 100 user I/O, and 2.5 V device technology. The Flash-based architecture provides nonvolatile configuration and supports reprogramming during development, qualification, and field updates. These characteristics make the APA450-FG144I useful where designers need more logic capacity than a small programmable-logic device but do not require the very high gate density and performance of the largest FPGA families.

The APA450-FG144I belongs to the same ProASICPLUS device family identified in the manufacturer product-page data. Its architecture combines configurable logic blocks, programmable interconnect, dedicated user I/O, and embedded memory resources for digital designs. Because the device is identified as a ProASICPLUS FPGA and its configuration technology is Flash-based, the design flow is centered on vendor-supported synthesis, placement, routing, programming, and verification tools rather than on a permanently fixed logic netlist.

Typical applications include industrial control modules, communications interfaces, network equipment, test and measurement systems, embedded controllers, signal conditioning, and general-purpose digital signal control. The 100-I/O arrangement is particularly useful for systems requiring several parallel buses and control interfaces. The 144-pin FBGA footprint also helps reduce board area compared with larger-lead-count packages, but it demands careful PCB layout, inspection, and assembly control.

The primary design consideration is package and tooling discipline. Use the APA450-FG144I pinout, differential-pair rules, power-decoupling guidance, and programming information in the manufacturer documentation before finalizing the PCB. Validate the complete design with the supported timing, simulation, and in-circuit programming workflow, especially when the board uses high-speed interfaces or a dense BGA escape arrangement.

This product page combines the exact APA450-FG144I identity, package information, documented device ratings, sourcing context, and engineering guidance into a practical selection reference. It also distinguishes the target industrial ordering code from closely related ProASICPLUS variants so engineers can determine whether a proposed substitution preserves package, I/O, temperature, and configuration requirements before approving a drop-in replacement.

کے لیے ڈراپ اِن متبادل APA450-FG144I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں APA450-FG144I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Configuration Technology, Device Type, Package.

Microchip Technology
Configuration Technology: Flash-based, reprogrammable and nonvolatile
Device Type: FPGA
Package: 144-LBGA
موازنہ کریں APA450-FG144I →

APA450-FG144I-B1

✅ ڈراپ-اِن
📦 144-pin FBGA
Same APA450-FG144I family identity and 144-pin FBGA class; ordering suffix B1 requires temperature and ordering-code verification

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

APA450-FG144

✅ ڈراپ-اِن
Microchip Technology
📦 144-pin FBGA
ProASICPLUS field-programmable gate array (FPGA) · 450K system gates · 110,592 cells · 100 I/O · 144-LBGA · Flash-based, reprogrammable and nonvolatile · Low-density programmable logic · ProASICPLUS

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

APA450-FGG144I

✅ ڈراپ-اِن
📦 144-pin FBGA
Same APA450 family and 144-pin FBGA class; FGG suffix package or ordering details must be reconciled with FG144I

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

APA450-FG144I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type ProASICPLUS field-programmable gate array (FPGA)
System Gates 450K gates
Maximum Operating Frequency 180 MHz
Process Technology 0.22 um
Core Supply Voltage 2.5 V
User I/O Count 100 I/O
پیکیج 144-pin FBGA
Configuration Technology Flash-based nonvolatile reprogrammable configuration
Programmable Logic Type FPGA
ماؤنٹنگ ٹائپ Surface mount
Product Family ProASICPLUS
Temperature Grade Industrial temperature grade indicated by the I ordering suffix

APA450-FG144I 144-pin fbga پن کنفیگریشن گائیڈ

APA450-FG144I (144-pin fbga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

APA450-FG144I کے لیے 144-pin fbga پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں APA450-FG144I.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

APA450-FG144I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Logic, Communications Interface, Network Equipment Control, Test and Measurement Instrumentation, Embedded Data Acquisition, Programmable Signal Conditioning.

🏭

Industrial Control Logic

The APA450-FG144I fits industrial control modules that need more programmable logic than a small CPLD while retaining a compact 144-pin FBGA footprint. Its 450K system gates can support parallel control paths, state machines, sequencing logic, and interface adaptation, while the 100 user I/O provide connections to sensors, actuators, memory, and fieldbus transceivers. The Flash-based configuration is useful when the controller must retain its programmed logic through power loss. During design, engineers should establish I/O-direction assignments, define voltage-domain constraints, and verify timing with the ProASICPLUS tool flow. Industrial suitability should be confirmed against the manufacturer’s complete environmental and electrical specifications rather than inferred solely from the industrial ordering suffix.

🌐

Communications Interface

The APA450-FG144I can implement protocol conversion, framing, buffering, and control functions in communications interface equipment. Its 450K system gates and 100 user I/O allow multiple parallel channels to coexist without requiring several small programmable devices, while operation up to 180 MHz provides useful timing margin for synchronous control logic. The nonvolatile Flash configuration allows field-updatable interfaces to retain their programmed function after power is removed. Engineers should use the manufacturer’s timing and I/O guidance to establish compliant pin assignments, clocking, and termination. This device is best suited to glue logic, protocol engines, and system-specific interface control rather than replacing a high-performance digital signal processor.

🌐

Network Equipment Control

The APA450-FG144I suits line-card, switch, and gateway designs requiring deterministic programmable logic for packet classification, buffering control, status aggregation, and backplane management. Its 450K system gates support parallel datapath control and multiple finite-state machines, while 100 user I/O allow the FPGA to interface with memory, PHY devices, LEDs, and management processors. The compact FBGA package reduces board footprint compared with larger lead-count programmable devices. A practical design should reserve pins for configuration access, implement clean power and ground partitioning, and validate interface timing across the intended system clock range. The result is a flexible implementation for low- and medium-complexity networking control functions.

🔧

Test and Measurement Instrumentation

The APA450-FG144I is appropriate for programmable timing, sequencing, and signal-routing logic used in test and measurement instruments. Its 450K system gates can accommodate multiple control channels, acquisition sequencing, pattern generation, and instrument-status logic, while 100 user I/O provide flexible connections to converters, relays, and front-end circuits. Flash-based configuration is valuable in laboratory equipment because the programmed test sequence can persist between sessions. Engineers should define deterministic clock domains and use the manufacturer’s timing tools to close timing for data-control paths. This application benefits from the device’s reprogrammability, allowing the same board design to support different measurement procedures and firmware revisions.

📟

Embedded Data Acquisition

The APA450-FG144I can coordinate sensors, converters, memory devices, and data-processing logic in embedded acquisition systems. Its 450K system gates provide enough capacity for acquisition sequencing, digital filtering support, trigger logic, and buffer-management functions, while the 100-I/O arrangement supports multiple converter data buses and control signals. Nonvolatile Flash configuration allows the acquisition behavior to remain defined after power cycling. The key design consideration is partitioning deterministic acquisition paths from slower supervisory logic and keeping the BGA escape routing manageable. Use the pinout and layout guidance in the manufacturer documentation, then validate signal integrity and timing with the intended converters and memory interfaces.

🔧

Programmable Signal Conditioning

The APA450-FG144I is useful for programmable logic around analog front ends, where channel selection, calibration tables, gain sequencing, and data routing require flexible digital control. The 450K system gates support multiple coordinated control paths, and 100 user I/O provide direct connections to converters, multiplexers, DACs, and status logic. Because the configuration is Flash-based, calibration sequences and control tables can be retained in the FPGA. Engineers should separate sensitive analog and return paths from high-speed digital routing, define ground references carefully, and verify all supported I/O standards against the electrical tables. This configuration allows product variants and calibration sequences to be changed without changing the PCB.

What is the APA450-FG144I?
The APA450-FG144I is a Microchip Technology ProASICPLUS FPGA with 450K system gates, a maximum operating frequency of 180 MHz, 100 user I/O, and a 144-pin FBGA package. According to the manufacturer APA450 product page, ProASICPLUS devices use Flash technology to provide a combination of reprogrammability and nonvolatile configuration. It is intended for programmable-logic designs requiring substantially more logic capacity than a basic PLD.
What are the key specifications of APA450-FG144I that engineers should know?
The APA450-FG144I provides 450K system gates, operation up to 180 MHz, 100 user I/O, and a 144-pin FBGA package. It also uses 0.22 um process technology and a 2.5 V core supply. The key engineering distinction is its Flash-based, nonvolatile ProASICPLUS architecture, which allows configuration to be programmed into the device and retained without a separate configuration PROM.
Where can I download the APA450-FG144I datasheet PDF?
The official APA450 product page is the primary location for the manufacturer’s ProASICPLUS documentation at https://www.microchip.com/en-us/product/APA450. A third-party datasheet index also identifies the APA450-FG144I at https://www.datasheets.com/microchip/apa450-fg144i. Use the manufacturer documentation for the authoritative pinout, electrical characteristics, timing, package drawings, and programming instructions.
Where can I find the APA450-FG144I pinout?
The APA450-FG144I pinout should be taken from the manufacturer’s APA450 package and pin-assignment documentation, available through the official product page. The device uses a 144-pin FBGA package with 100 user I/O, so assigning PCB tracks without the complete BGA ball table risks incorrect power, ground, configuration, and user-I/O connections. Request the package drawing and pin-definition table before releasing the layout.
Is APA450-FG144I suitable for industrial applications?
The APA450-FG144I is identified as an industrial-temperature ProASICPLUS FPGA through its ordering code, with 450K system gates, 100 I/O, and operation up to 180 MHz. Those characteristics suit industrial controllers, communications equipment, and test systems. Confirm the complete electrical and environmental ratings in the manufacturer documentation before using the device in a safety-critical or extended-temperature installation.
How does APA450-FG144I compare with APA450-FG144?
APA450-FG144I and APA450-FG144 are closely related ProASICPLUS devices in the 450K-gate class and use the 144-pin FBGA package, but the I suffix distinguishes their ordering configuration. APA450-FG144 is listed with 100 I/O, while the target APA450-FG144I is the industrial ordering variant. Verify temperature grade, marking, and programmed-device requirements in the manufacturer documentation before treating one as a drop-in replacement.
What is the best drop-in replacement for APA450-FG144I?
APA450-FG144I-B1 is the closest documented same-family candidate for a drop-in consideration because it retains the APA450-FG144I base identity and appears in the cross-reference results. The package, gate count, I/O arrangement, electrical limits, and programmed configuration still require exact verification against the manufacturer documentation. A replacement should not be approved solely because its ordering code contains the same base part number.
Can APA450-FG144I-B1 replace APA450-FG144I?
APA450-FG144I-B1 is a same-family candidate that may preserve the basic device and package identity, but approval requires confirmation of the B1 ordering code, temperature grade, lifecycle status, and electrical compatibility. According to the manufacturer family data, the APA450 is a Flash-based ProASICPLUS device. Use the published BGA pin definition and device programming files to verify that the candidate is pin- and function-compatible.
When should I choose APA450-FG144I over a smaller programmable-logic device?
Choose APA450-FG144I when a design needs more than the logic and I/O capacity of a small CPLD, particularly for parallel buses, multi-block control functions, or substantial interconnect requirements. Its 450K system gates and 100 user I/O provide a clear capacity increase, while the 144-pin FBGA package keeps the device relatively compact. A smaller PLD is preferable only when the design is simple enough that its logic, routing, and pin resources are not limiting.
Is APA450-FG144I the same as APA450-FGG144I?
APA450-FGG144I and APA450-FG144I are closely related ProASICPLUS ordering codes, but their suffixes must be decoded from the manufacturer’s package and temperature ordering tables before interchange is claimed. Both are associated with the APA450 family and 144-ball package class in available listings. Confirm the exact BGA ball map, core voltage, I/O standards, temperature grade, and programming-file compatibility.
How do I buy APA450-FG144I and check its current lead time?
Use the Request a Quote form on this page to request the APA450-FG144I, current lead time, stock status, and order quantity from XAIPART. Manufacturer and distributor records identify the exact part, but stock and lead time can change with demand. Providing the required quantity and target assembly date in the request will allow the order to be reviewed against the latest supply position.
What is the current price of APA450-FG144I?
The current commercial price for APA450-FG144I should be requested through the Request a Quote form on this page because pricing depends on quantity, sourcing status, and market availability. The available structured pricing reference is associated with the closely identified APA450-FGG144I listing, not a quantity-break table for the exact target MPN. A written quote therefore provides the applicable unit and delivery terms for APA450-FG144I.
Is APA450-FG144I currently in stock?
Current APA450-FG144I stock should be confirmed through the Request a Quote form on this page using the required order quantity and target delivery date. Distributor and marketplace records exist for the exact device, but an indexed listing does not by itself establish present inventory. The request will establish whether the part can be allocated from available channels and what lead time applies.
What can replace APA450-FG144I?
APA450-FG144I-B1 and APA450-FG144 are the closest same-family candidates to evaluate as APA450-FG144I replacements. The family data confirms a shared ProASICPLUS foundation, and available records associate the candidates with the same 144-pin FBGA class. However, a safe drop-in decision also requires checking the exact BGA ball assignments, temperature grade, core and I/O voltages, timing grade, and configuration file compatibility.
Is there a cross-brand equivalent for APA450-FG144I?
No cross-brand drop-in equivalent is established by the available cross-reference results. The APA450-FG144I combines a specific 144-pin FBGA footprint, 100 user I/O, 450K system gates, Flash-based configuration, and a 180 MHz maximum operating frequency. A competitor device with similar advertised logic capacity is not automatically interchangeable, so PCB and design-tool compatibility must be proven before any cross-brand replacement is considered.

کے لیے انجینئرنگ ریفرنس ڈیٹا APA450-FG144I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose APA450-FG144I when the design requires a 450K-gate Flash-based FPGA, 100 user I/O, operation up to 180 MHz, and a 144-pin FBGA package. It is well suited to industrial controllers, communications interfaces, network equipment, test systems, and data-acquisition logic. APA450-FG144I-B1 is the closest same-family candidate to evaluate, but its B1 ordering suffix must be checked against temperature, lifecycle, and marking requirements. APA450-FG144 may fit an existing non-I design only after confirming that its temperature grade and electrical characteristics meet the system requirements. APA450-FGG144I should be selected only after its FGG suffix and package details are reconciled with the target. No cross-brand replacement should be approved without proving BGA ball compatibility, I/O-standard support, timing performance, configuration-file interoperability, and continued software-tool support.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ APA450-FG144I-B1 APA450-FG144 APA450-FGG144I
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 144-pin FBGA 144-pin FBGA 144-pin FBGA 144-pin FBGA
Device Type ProASICPLUS FPGA ProASICPLUS FPGA ProASICPLUS FPGA ProASICPLUS FPGA
System Gates 450K gates 450K gates 450K gates 450K gates
Maximum Operating Frequency 180 MHz 180 MHz 180 MHz 180 MHz
User I/O Count 100 I/O 100 I/O 100 I/O 100 I/O
Configuration Technology Flash-based nonvolatile Flash-based nonvolatile Flash-based nonvolatile Flash-based nonvolatile
Process Technology 0.22 um 0.22 um 0.22 um 0.22 um
Core Supply Voltage 2.5 V 2.5 V 2.5 V 2.5 V
Ordering-Code Qualification APA450-FG144I industrial ordering code B1 suffix requires manufacturer ordering-table confirmation Non-I ordering code requires temperature-grade confirmation FGG suffix requires package-ordering-code confirmation

اہم امتیازی خصوصیات

  • Exact APA450 family identity with 450K system gates (بمقابلہAPA450-FG144)
  • Industrial ordering configuration (بمقابلہAPA450-FGG144I)
  • Nonvolatile Flash-based configuration (بمقابلہAPA450-FG144I-B1)

ڈیزائن نوٹس

Treat the APA450-FG144I as a dense 144-pin BGA and follow the manufacturer’s ball-map and escape-routing guidance before assigning tracks. Keep power and ground distribution on dedicated layers where the recommended stack-up permits, use via-in-pad only when the assembly process and reliability plan support it, and avoid routing high-speed signals through split power or ground planes. Confirm pad dimensions and solder-mask policy against the exact package drawing rather than relying on a generic FBGA footprint.

Separate the device’s core, I/O, and auxiliary supply requirements according to the manufacturer’s recommended schematic and decoupling tables. Place the required bulk and high-frequency capacitors at the associated power balls with the shortest practical current path. Validate power-up sequencing, voltage tolerances, and I/O-state behavior during reset. Because the published listing identifies a 2.5 V core technology but does not provide complete rail requirements, do not derive the complete power tree from that single value.

Assign clock, data, configuration, and serial programming interfaces before routing the BGA escape fanout. Use the ProASICPLUS timing engine to constrain all relevant clock domains and I/O timing, and reserve implementation resources for probing, debugging, and configuration access. Maintain continuous return paths beneath high-speed signals, and apply the manufacturer’s I/O-standard and slew recommendations to external interfaces to reduce ringing, overshoot, and setup-time failures.

Do not approve a replacement solely from the APA450 family name or BGA package description. Verify the exact ordering suffix, temperature grade, core voltage, I/O voltage domains, speed grade, exposed connections, programming file, and BGA ball map. Also check whether an existing board is designed for a cold orPb-free assembly process. These checks prevent a mechanically similar replacement from introducing electrical, thermal, or configuration incompatibilities.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the manufacturer or distributor information. The APA450-FG144I is categorized as an industrial-ordering code, but that ordering suffix alone is not treated as formal AEC-Q100 evidence.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

APA450-FG144I datasheet APA450-FG144I pinout APA450-FG144I datasheet pdf APA450-FG144I equivalent APA450-FG144I replacement APA450-FG144I vs APA450-FG144 APA450-FG144I footprint APA450-FG144I price APA450-FG144I stock Microchip APA450-FG144I APA450 450K gate FPGA APA450 144-pin FBGA APA450 pqg208i APA450 clarion

متعلقہ اجزاء اور اصطلاحات

Microchip Technology APA450-FG144I APA450-FG144I-B1 APA450-FG144 APA450-FGG144I ProASICPLUS field-programmable gate array FPGA programmable logic system gates Flash-based configuration nonvolatile configuration 450K system gates 180 MHz 100 user I/O 144-pin FBGA BGA package surface-mount semiconductor 0.22 um process technology 2.5 V core voltage industrial control communications interface network equipment test and measurement data acquisition
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں