AT90USB1286-MUR - 16MHz 128KB USB AVR MCU | Microchip
MPN: AT90USB1286-MUR ✓ نشطAT90USB1286-MUR نظرة عامة
An 8-bit AVR RISC microcontroller is a compact embedded-processing component that combines program memory, data memory, digital and analog peripherals, and communication interfaces on one device. Within the semiconductor hierarchy, the AT90USB1286 belongs to the microcontroller family and functions as a general-purpose system controller with a dedicated USB device controller. Its integrated architecture reduces the need for external USB interface devices in USB-connected equipment.
The AT90USB1286 includes 128 KB of in-system-programmable flash with read-while-write capability, 8 KB of static RAM, and 4 KB of EEPROM. These memories support downloaded firmware, working data, and nonvolatile configuration storage. Its 48 general-purpose I/O lines provide flexible connections for keyboards, control panels, sensor interfaces, communications, and human-interface devices. Four flexible timer/counter blocks add compare and PWM functions for timing, dimming, motor control, and waveform generation.
Communications and mixed-signal resources are integrated into the same controller. The device includes a USART, byte-oriented two-wire serial interface, USB 2.0 low-speed and full-speed device operation, an eight-channel 10-bit ADC, and JTAG on-chip debugging. The manufacturer describes up to 16 MIPS throughput, making the part suitable for real-time control tasks that must respond quickly while communicating with a USB host.
Typical uses include USB keyboards and pointing devices, human-interface adapters, embedded control panels, USB-connected instrumentation, data acquisition front ends, and industrial peripherals. Engineers can use the USB interface for configuration, logging, firmware updating, or direct host-to-device control. The 48 I/O lines also allow the same MCU to supervise external sensors and actuators instead of requiring a separate interface IC.
The exposed-pad QFN requires careful PCB layout and adequate thermal dissipation. Follow the manufacturer datasheet for the exposed-pad connection, pin assignment, decoupling requirements, clock configuration, and USB signal-routing guidance. USB differential traces should be routed as a controlled impedance pair, with minimal vias and uninterrupted return paths, while the USB transceiver supply and ground connections should be placed close to the device.
This product page combines manufacturer specifications, family-level comparisons, sourcing guidance, and practical design guidance. It helps engineers distinguish the 128 KB AT90USB1286 from lower-memory AT90USB devices and assess whether its integrated USB, analog, timing, and communications resources fit a specific embedded design.
بدائل مباشرة لـ AT90USB1286-MUR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع AT90USB1286-MUR (نفس عامل الشكل والبصمة) — يختلف في Package, Serial Interfaces, General-Purpose Working Registers, SRAM, EEPROM.
AT90USB647-MUR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←AT90USB646-MUR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←AT90USB1286-MUR الحدود القصوى والخصائص الكهربائية
| Microcontroller Core | 8-bit AVR RISC |
| أقصى تردد للساعة | 16 MHz |
| Flash Memory | 128 KB |
| Flash Programming | In-system programmable with read-while-write |
| SRAM | 8 KB |
| EEPROM | 4 KB |
| General-Purpose I/O Lines | 48 |
| General-Purpose Working Registers | 32 |
| USB Interface | USB 2.0 low-speed and full-speed device |
| ADC Resolution | 10 bits |
| ADC Channels | 8 |
| Timer/Counter Blocks | 4 with compare modes and PWM |
| Serial Interfaces | 1 USART and byte-oriented 2-wire serial interface |
| Debug Interface | JTAG on-chip debug |
| Maximum Throughput | 16 MIPS |
| Operating Voltage | 2.7 V to 5.5 V |
| درجة حرارة التشغيل | -40°C to +85°C |
| العلبة | 64-QFN, 9 x 9 mm, exposed pad |
| نوع التركيب | Surface mount |
دليل تكوين أطراف AT90USB1286-MUR 64-qfn, 9 x 9 mm, exposed pad
تكوين الأطراف لـ AT90USB1286-MUR (حزمة 64-qfn, 9 x 9 mm, exposed pad). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ AT90USB1286-MUR.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
AT90USB1286-MUR مناسب لـ 6 التطبيقs: USB Human-Interface Controller, USB Data-Acquisition Front End, Industrial Control Panel, USB-Powered Instrumentation, USB Communication Adapter, LED Lighting and Status Controller.
USB Human-Interface Controller
The AT90USB1286-MUR fits USB keyboard, pointer, and control-device designs because its 48 general-purpose I/O lines can support matrix scanning, indicators, and auxiliary controls. Its 128 KB flash accommodates protocol stacks and application firmware, while 8 KB SRAM provides working memory for scanning state and USB descriptors. The integrated USB 2.0 device controller avoids a separate USB interface IC. Implement the device using the manufacturer datasheet’s USB transceiver, impedance, decoupling, and exposed-pad guidance.
موصى به
USB Data-Acquisition Front End
The AT90USB1286-MUR can supervise an eight-channel, 10-bit ADC while streaming acquisition results to a USB host. Its four timer/counter blocks support sampling intervals, capture timing, and PWM-driven test excitation, and the USART provides an additional path for external instruments. The 128 KB flash leaves room for calibration tables, filtering, and USB firmware. Validate analog input limits, acquisition timing, grounding, and signal conditioning against the manufacturer datasheet before layout release.
موصى به
Industrial Control Panel
The AT90USB1286-MUR supports an industrial control panel that combines USB connectivity with switches, status LEDs, sensors, and actuator outputs. Its 48 I/O lines reduce the need for external GPIO expansion, while the timer/counter PWM outputs can control indicators or simple drives. USB can provide configuration transfer, diagnostics, and firmware access. For industrial deployment, confirm the stated -40°C to +85°C operating range against the enclosure temperature and review isolation, surge, and grounding requirements.
موصى به
USB-Powered Instrumentation
The AT90USB1286-MUR is suitable for USB-powered test and measurement equipment where a host must configure the product, collect status, or update operating parameters. The integrated USB device controller, USART, two-wire interface, ADC, and timers provide several ways to coordinate external circuitry without a separate interface controller. The 16 MHz AVR core supports real-time peripheral handling, and 128 KB flash accommodates instrument firmware. Verify bus-power limits, analog accuracy, grounding, and USB signal routing in the datasheet.
موصى به
USB Communication Adapter
The AT90USB1286-MUR can bridge a USB host to industrial or peripheral circuitry through its USART, two-wire serial interface, GPIO, and timer resources. The device acts as a protocol engine while the dedicated USB controller manages host communication, allowing compact adapters without an external USB bridge. Its 48 I/O lines can handle handshake signals and discrete controls, and 128 KB flash supports protocol variants. Confirm electrical levels, protocol timing, and pin multiplexing for the attached peripheral.
موصى به
LED Lighting and Status Controller
The AT90USB1286-MUR can combine USB configuration with LED indication and programmable timing functions. Four timer/counter blocks with compare and PWM modes support dimming, sequencing, and periodic status behavior, while 48 I/O lines leave ample connections for indicators and control inputs. A USB host can adjust operating states or retrieve status information without a separate communications controller. Select suitable drive components for the LED load and validate timing, current limits, grounding, and USB bus-power requirements during design.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ AT90USB1286-MUR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | AT90USB647-MUR | AT90USB646-MUR |
|---|---|---|---|
| Package | 64-QFN (9x9), exposed pad | 64-QFN (9x9), exposed pad | 64-QFN (9x9), exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 64 KB |
| Clock Frequency | 16 MHz | 16 MHz | 16 MHz |
| USB Support | USB 2.0 low-speed and full-speed device | USB device controller | USB device controller |
أبرز الفروقات
- Larger flash configuration within the compared AT90USB family (مقابلAT90USB646-MUR)
- Documented 48 general-purpose I/O lines (مقابلAT90USB646-MUR)
- Integrated analog acquisition and four timing blocks (مقابلAT90USB647-MUR)
- Single-device USB connectivity with serial-interface options (مقابلAT90USB646-MUR)
ملاحظات التصميم
Route the USB differential pair as a controlled-impedance pair using the manufacturer’s layout guidance. Minimize stubs, vias, and branch connections, and provide a continuous return path beneath the pair. Place the USB transceiver support components and decoupling capacitors close to the relevant AT90USB1286-MUR pins. Verify the final stackup, trace geometry, and impedance against the selected USB interface requirements.
The 64-QFN exposes a thermal pad on the underside of the package. Connect that pad to the ground plane according to the manufacturer datasheet and preserve solderability with an appropriate land pattern. Use a thermal-via field where recommended, but avoid accidental electrical isolation where the pad requires a ground connection. Estimate the worst-case regulator and I/O dissipation when sizing copper area and thermal paths.
Place input, output, and USB-interface decoupling capacitors close to their associated pins and orient them to minimize loop area. Keep noisy switching-regulator paths away from the USB data pair and analog inputs. Review the device’s 2.7 V to 5.5 V operating range, USB bus-power behavior, and peripheral load currents before selecting the system supply and bulk-capacitor arrangement.
Do not treat a shared package and clock speed as proof of drop-in equivalence. Compare USB pins, alternate-function assignments, interrupt vectors, ADC channels, timer channels, memory organization, electrical limits, and exposed-pad requirements for each candidate. In particular, AT90USB646-MUR has 64 KB flash rather than the AT90USB1286-MUR’s 128 KB, so its firmware must fit without changing the expected memory map or update strategy.
معلومات الامتثال
The manufacturer and distributor records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this ordering code.