Microchip Technology

AT90USB1286-MUR - 16MHz 128KB USB AVR MCU | Microchip

MPN: AT90USB1286-MUR ✓ Aktif
2.7 V to 5.5 V Vdss 64-QFN, 9 x 9 mm, exposed pad Package 16 MHz Speed 128 KB Memory
MOQ: 1 |

AT90USB1286-MUR Genel Bakış

The Microchip Technology AT90USB1286-MUR is a 16 MHz, 8-bit AVR RISC microcontroller with 128 KB of ISP flash memory, 8 KB SRAM, 4 KB EEPROM, and USB 2.0 device connectivity in a 64-QFN 9 x 9 mm package with an exposed pad. It combines 48 general-purpose I/O lines with USB full-speed and low-speed operation for compact human-interface, peripheral, and control designs.

An 8-bit AVR RISC microcontroller is a compact embedded-processing component that combines program memory, data memory, digital and analog peripherals, and communication interfaces on one device. Within the semiconductor hierarchy, the AT90USB1286 belongs to the microcontroller family and functions as a general-purpose system controller with a dedicated USB device controller. Its integrated architecture reduces the need for external USB interface devices in USB-connected equipment.

The AT90USB1286 includes 128 KB of in-system-programmable flash with read-while-write capability, 8 KB of static RAM, and 4 KB of EEPROM. These memories support downloaded firmware, working data, and nonvolatile configuration storage. Its 48 general-purpose I/O lines provide flexible connections for keyboards, control panels, sensor interfaces, communications, and human-interface devices. Four flexible timer/counter blocks add compare and PWM functions for timing, dimming, motor control, and waveform generation.

Communications and mixed-signal resources are integrated into the same controller. The device includes a USART, byte-oriented two-wire serial interface, USB 2.0 low-speed and full-speed device operation, an eight-channel 10-bit ADC, and JTAG on-chip debugging. The manufacturer describes up to 16 MIPS throughput, making the part suitable for real-time control tasks that must respond quickly while communicating with a USB host.

Typical uses include USB keyboards and pointing devices, human-interface adapters, embedded control panels, USB-connected instrumentation, data acquisition front ends, and industrial peripherals. Engineers can use the USB interface for configuration, logging, firmware updating, or direct host-to-device control. The 48 I/O lines also allow the same MCU to supervise external sensors and actuators instead of requiring a separate interface IC.

The exposed-pad QFN requires careful PCB layout and adequate thermal dissipation. Follow the manufacturer datasheet for the exposed-pad connection, pin assignment, decoupling requirements, clock configuration, and USB signal-routing guidance. USB differential traces should be routed as a controlled impedance pair, with minimal vias and uninterrupted return paths, while the USB transceiver supply and ground connections should be placed close to the device.

This product page combines manufacturer specifications, family-level comparisons, sourcing guidance, and practical design guidance. It helps engineers distinguish the 128 KB AT90USB1286 from lower-memory AT90USB devices and assess whether its integrated USB, analog, timing, and communications resources fit a specific embedded design.

Drop-in alternatifler için AT90USB1286-MUR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller AT90USB1286-MUR (aynı form faktörü ve ayağa oturma) — farklı olan Package, Serial Interfaces, General-Purpose Working Registers, SRAM, EEPROM.

Microchip Technology
Package: 64-QFN, 9 x 9 mm
Serial Interfaces: USART and byte-oriented two-wire serial interface
General-Purpose Working Registers: 32 registers
İle Karşılaştır AT90USB1286-MUR →
Microchip Technology
Package: 64-VFQFN with exposed pad
Serial Interfaces: USART and byte-oriented 2-wire serial interface
SRAM: 4 KB
İle Karşılaştır AT90USB1286-MUR →

AT90USB647-MUR

✅ Yerleştirme
Microchip Technology
📦 64-QFN (9x9)
8-bit AVR RISC microcontroller with USB · 16 MHz · 64 KB · Supported · 2 KB · 4 KB · 48 · 32

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

AT90USB646-MUR

✅ Yerleştirme
Microchip Technology
📦 64-QFN (9x9)
8-bit AVR RISC-based USB microcontroller · 16 MHz · 64 KB flash · 64K x 8 bits · 2 KB · 4 KB · 48 lines · 32 registers

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

AT90USB1286-MUR Maksimum Değerlendirmeler & Elektriksel Özellikler

Microcontroller Core 8-bit AVR RISC
Azami Saat Hızı 16 MHz
Flash Memory 128 KB
Flash Programming In-system programmable with read-while-write
SRAM 8 KB
EEPROM 4 KB
General-Purpose I/O Lines 48
General-Purpose Working Registers 32
USB Interface USB 2.0 low-speed and full-speed device
ADC Resolution 10 bits
ADC Channels 8
Timer/Counter Blocks 4 with compare modes and PWM
Serial Interfaces 1 USART and byte-oriented 2-wire serial interface
Debug Interface JTAG on-chip debug
Maximum Throughput 16 MIPS
Operating Voltage 2.7 V to 5.5 V
İşletim Sıcaklığı -40°C to +85°C
Paket 64-QFN, 9 x 9 mm, exposed pad
Montaj Türü Surface mount

AT90USB1286-MUR 64-qfn, 9 x 9 mm, exposed pad Pin Yapısı Kılavuzu

AT90USB1286-MUR (64-qfn, 9 x 9 mm, exposed pad paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-qfn, 9 x 9 mm, exposed pad paket pin çizelgesi için AT90USB1286-MUR

Ayrıntılı pin çıkış verisi mevcut değil: AT90USB1286-MUR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

AT90USB1286-MUR için uygundur 6 uygulamas: USB Human-Interface Controller, USB Data-Acquisition Front End, Industrial Control Panel, USB-Powered Instrumentation, USB Communication Adapter, LED Lighting and Status Controller.

🖥️

USB Human-Interface Controller

The AT90USB1286-MUR fits USB keyboard, pointer, and control-device designs because its 48 general-purpose I/O lines can support matrix scanning, indicators, and auxiliary controls. Its 128 KB flash accommodates protocol stacks and application firmware, while 8 KB SRAM provides working memory for scanning state and USB descriptors. The integrated USB 2.0 device controller avoids a separate USB interface IC. Implement the device using the manufacturer datasheet’s USB transceiver, impedance, decoupling, and exposed-pad guidance.

📊

USB Data-Acquisition Front End

The AT90USB1286-MUR can supervise an eight-channel, 10-bit ADC while streaming acquisition results to a USB host. Its four timer/counter blocks support sampling intervals, capture timing, and PWM-driven test excitation, and the USART provides an additional path for external instruments. The 128 KB flash leaves room for calibration tables, filtering, and USB firmware. Validate analog input limits, acquisition timing, grounding, and signal conditioning against the manufacturer datasheet before layout release.

🏭

Industrial Control Panel

The AT90USB1286-MUR supports an industrial control panel that combines USB connectivity with switches, status LEDs, sensors, and actuator outputs. Its 48 I/O lines reduce the need for external GPIO expansion, while the timer/counter PWM outputs can control indicators or simple drives. USB can provide configuration transfer, diagnostics, and firmware access. For industrial deployment, confirm the stated -40°C to +85°C operating range against the enclosure temperature and review isolation, surge, and grounding requirements.

🔧

USB-Powered Instrumentation

The AT90USB1286-MUR is suitable for USB-powered test and measurement equipment where a host must configure the product, collect status, or update operating parameters. The integrated USB device controller, USART, two-wire interface, ADC, and timers provide several ways to coordinate external circuitry without a separate interface controller. The 16 MHz AVR core supports real-time peripheral handling, and 128 KB flash accommodates instrument firmware. Verify bus-power limits, analog accuracy, grounding, and USB signal routing in the datasheet.

🌐

USB Communication Adapter

The AT90USB1286-MUR can bridge a USB host to industrial or peripheral circuitry through its USART, two-wire serial interface, GPIO, and timer resources. The device acts as a protocol engine while the dedicated USB controller manages host communication, allowing compact adapters without an external USB bridge. Its 48 I/O lines can handle handshake signals and discrete controls, and 128 KB flash supports protocol variants. Confirm electrical levels, protocol timing, and pin multiplexing for the attached peripheral.

💡

LED Lighting and Status Controller

The AT90USB1286-MUR can combine USB configuration with LED indication and programmable timing functions. Four timer/counter blocks with compare and PWM modes support dimming, sequencing, and periodic status behavior, while 48 I/O lines leave ample connections for indicators and control inputs. A USB host can adjust operating states or retrieve status information without a separate communications controller. Select suitable drive components for the LED load and validate timing, current limits, grounding, and USB bus-power requirements during design.

What are the key specifications of AT90USB1286-MUR that engineers should know?
The AT90USB1286-MUR is a 16 MHz, 8-bit AVR RISC microcontroller with 128 KB of flash, 8 KB SRAM, 4 KB EEPROM, 48 I/O lines, and USB 2.0 device connectivity. The manufacturer product page also identifies four timer/counter blocks, PWM, a USART, a two-wire serial interface, an eight-channel 10-bit ADC, and JTAG debugging. It is packaged in a 64-QFN measuring 9 x 9 mm with an exposed pad.
Where can I download the AT90USB1286 datasheet PDF?
The official AT90USB1286 datasheet PDF is available from Microchip Technology at the manufacturer download URL shown on this page. The document covers the AT90USB64 and AT90USB128 families, including memory organization, electrical characteristics, USB operation, peripheral behavior, and package information. Use the manufacturer datasheet as the controlling reference for pin names, programming, clock setup, decoupling, and exposed-pad layout.
What is the AT90USB1286-MUR pinout and package?
The AT90USB1286-MUR uses a 64-QFN package measuring 9 x 9 mm with an exposed pad. Its publicly documented pin map includes power, ground, reset, programming, clock, communications, analog, and general-purpose I/O connections. Use the numbered pin-description table and package drawing in the manufacturer datasheet when assigning PCB nets, especially for the exposed-pad connection and USB data pair.
Is AT90USB1286-MUR suitable for USB human-interface devices?
Yes, the AT90USB1286-MUR is suitable for USB human-interface devices because it integrates a USB 2.0 full-speed and low-speed device controller with 48 general-purpose I/O lines. Its four timer/counter blocks with PWM support, 128 KB flash, and 8 KB SRAM are useful for key scanning, indicator control, communication, and firmware-heavy USB accessories. The design must still meet the USB signal-integrity and power requirements in the manufacturer datasheet.
How is AT90USB1286-MUR different from AT90USB646-MUR?
The principal documented difference is program-memory capacity: AT90USB1286-MUR provides 128 KB of flash, while AT90USB646-MUR provides 64 KB. Both are 16 MHz, 64-QFN devices in the AT90USB family, so their USB-oriented hardware and package families align. Choose the AT90USB1286 when firmware size is the deciding constraint, and review all peripheral, voltage, and timing requirements before replacement.
AT90USB1286-MUR vs AT90USB647-MUR — which is better for a USB control application?
AT90USB1286-MUR is the stronger general selection when a design needs the 128 KB flash configuration and a broadly specified 48-I/O, 16 MHz platform. The cross-reference information identifies AT90USB647-MUR as another 64-QFN, 128 KB family device, making it a relevant comparison for USB control designs. Verify the exact pin functions, electrical limits, clock requirements, and USB implementation in the manufacturer documentation before selecting either device.
When should I choose AT90USB1286-MUR over AT90USB646-MUR?
Choose AT90USB1286-MUR when the application requires more program memory than the 64 KB offered by AT90USB646-MUR or when the larger-memory AT90USB configuration simplifies firmware organization. The AT90USB1286 also offers 48 general-purpose I/O lines, 8 KB SRAM, USB device operation, and integrated analog and timing peripherals. The AT90USB646-MUR remains appropriate when 64 KB flash is sufficient and the lower-memory configuration is preferred.
When should I choose AT90USB1286-MUR instead of AT90USB647-MUR?
Choose AT90USB1286-MUR when its documented 128 KB flash and 48 general-purpose I/O configuration provides the clearest match for the design, particularly when the manufacturer product documentation and package details are already aligned with that part. AT90USB647-MUR is a close 64-QFN family candidate, but the final choice depends on verified pin-level functionality, electrical limits, clock configuration, and application requirements rather than memory capacity alone.
What can replace AT90USB1286-MUR without changing the PCB footprint?
The closest documented footprint candidates are AT90USB646-MUR and AT90USB647-MUR, both from the same 64-QFN AT90USB family. AT90USB647-MUR retains the 128 KB memory class, while AT90USB646-MUR has 64 KB flash. A replacement is not automatically guaranteed to be functionally identical, so confirm USB pin assignments, analog channels, timers, serial interfaces, clocking, and electrical limits against the manufacturer documentation.
What is the best cross-brand equivalent for AT90USB1286-MUR?
No cross-brand, pin-compatible AT90USB1286-MUR equivalent is established by the available manufacturer and cross-reference records. The documented drop-in candidates are Microchip Technology family members, so changing manufacturers would require independent verification of the 64-QFN land pattern, USB transceiver characteristics, exposed pad, I/O mapping, memory map, interrupt structure, and programming ecosystem. Treat any cross-brand proposal as a new design review rather than an automatic replacement.
Is AT90USB1286-MUR the same as AT90USB646-MUR?
No. Both are 64-QFN, 16 MHz members of the AT90USB family, but their flash capacities differ by 64 KB: AT90USB1286-MUR has 128 KB and AT90USB646-MUR has 64 KB. Their common package and clock family make them useful comparison points, but firmware capacity and detailed peripheral or pin requirements must be checked before treating either as a direct substitution.
What can replace AT90USB1286-MUR for a USB keyboard controller?
The AT90USB647-MUR is the closest documented family candidate for a keyboard controller because it retains the 128 KB memory class and 64-QFN package format. It should be selected only after checking USB pin functions, I/O availability, timers, analog channels, clock configuration, and exposed-pad requirements. Firmware may also require adaptation if device addresses, interrupts, or peripheral assignments differ.
Where can I buy AT90USB1286-MUR online?
Use the Request a Quote form on this page to request AT90USB1286-MUR availability, commercial terms, and current lead time. The form is the appropriate channel for a quote-first purchasing request and avoids presenting a potentially stale catalog figure as a guaranteed transaction price. Specify the required quantity, tape-and-reel packaging needs, and production schedule when submitting the request.
What is the price of AT90USB1286-MUR?
The current commercial price for AT90USB1286-MUR should be obtained through the Request a Quote form on this page. Request the quantity-specific price, reel quantity, packaging confirmation, and lead time together so the response reflects the intended procurement plan. The structured pricing panel is the authoritative source for any displayed commercial pricing.
What is the lead time and stock status for AT90USB1286-MUR?
Use the Request a Quote form on this page to confirm current lead time, minimum order quantity, and stock allocation for AT90USB1286-MUR. One catalog listing describes an eight-week lead time and a non-stocked condition, but current availability can vary with quantity and channel activity. Production planning should therefore use the date and quantity shown in the quotation response.

Mühendislik referans verileri: AT90USB1286-MUR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the AT90USB1286-MUR for a USB-connected embedded product that benefits from 128 KB flash, 8 KB SRAM, 48 GPIO lines, an eight-channel 10-bit ADC, four timer/counter blocks, USART, two-wire serial, and JTAG debugging in one 64-QFN device. It is particularly suitable for human-interface products, data-acquisition front ends, control panels, communication adapters, and programmable indicator systems. AT90USB647-MUR is the closest documented same-footprint family candidate because it retains the 128 KB memory class, but verify its detailed pin functions and electrical characteristics before release. AT90USB646-MUR is appropriate only when 64 KB flash is sufficient; it uses 50% less program memory than the target and may require firmware reduction or redesign. No cross-brand drop-in equivalence is established, so changing manufacturers should be treated as a fresh design and qualification effort rather than a component substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün AT90USB647-MUR AT90USB646-MUR
Package 64-QFN (9x9), exposed pad 64-QFN (9x9), exposed pad 64-QFN (9x9), exposed pad
Brand Microchip Technology Microchip Technology Microchip Technology
Flash Memory 128 KB 128 KB 64 KB
Clock Frequency 16 MHz 16 MHz 16 MHz
USB Support USB 2.0 low-speed and full-speed device USB device controller USB device controller

Ana Farklılayıcılar

  • Larger flash configuration within the compared AT90USB family (karşılaştırma:AT90USB646-MUR)
  • Documented 48 general-purpose I/O lines (karşılaştırma:AT90USB646-MUR)
  • Integrated analog acquisition and four timing blocks (karşılaştırma:AT90USB647-MUR)
  • Single-device USB connectivity with serial-interface options (karşılaştırma:AT90USB646-MUR)

Tasarım Notları

Route the USB differential pair as a controlled-impedance pair using the manufacturer’s layout guidance. Minimize stubs, vias, and branch connections, and provide a continuous return path beneath the pair. Place the USB transceiver support components and decoupling capacitors close to the relevant AT90USB1286-MUR pins. Verify the final stackup, trace geometry, and impedance against the selected USB interface requirements.

The 64-QFN exposes a thermal pad on the underside of the package. Connect that pad to the ground plane according to the manufacturer datasheet and preserve solderability with an appropriate land pattern. Use a thermal-via field where recommended, but avoid accidental electrical isolation where the pad requires a ground connection. Estimate the worst-case regulator and I/O dissipation when sizing copper area and thermal paths.

Place input, output, and USB-interface decoupling capacitors close to their associated pins and orient them to minimize loop area. Keep noisy switching-regulator paths away from the USB data pair and analog inputs. Review the device’s 2.7 V to 5.5 V operating range, USB bus-power behavior, and peripheral load currents before selecting the system supply and bulk-capacitor arrangement.

Do not treat a shared package and clock speed as proof of drop-in equivalence. Compare USB pins, alternate-function assignments, interrupt vectors, ADC channels, timer channels, memory organization, electrical limits, and exposed-pad requirements for each candidate. In particular, AT90USB646-MUR has 64 KB flash rather than the AT90USB1286-MUR’s 128 KB, so its firmware must fit without changing the expected memory map or update strategy.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer and distributor records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this ordering code.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

at90usb1286 datasheet at90usb1286 arduino at90usb1286 tqfp at90usb1286 board at90usb1286 teensy 2.0 ++ atmel at90usb1286 teensy at90usb1286 AT90USB1286-MUR datasheet pdf AT90USB1286-MUR pinout AT90USB1286-MUR equivalent AT90USB1286-MUR replacement AT90USB1286-MUR vs AT90USB647-MUR AT90USB1286-MUR price AT90USB1286-MUR stock

İlgili Bileşenler ve Terimler

Microchip Technology AT90USB1286-MUR AT90USB1286 AT90USB647-MUR AT90USB646-MUR AT90USB family AVR RISC 8-bit microcontroller USB 2.0 USB device controller In-system programming read-while-write USART two-wire serial interface JTAG on-chip debug 10-bit ADC PWM timer/counter real-time counter EEPROM SRAM 64-QFN QFN family surface-mount package exposed pad
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle