Microchip Technology

ATF16V8C-7PU - 7ns 300-Gate 16V8 SPLD PLD | Microchip Technology

MPN: ATF16V8C-7PU ✓ نشط
5 V +/- 10% industrial, 5 V +/- 5% commercial Vdss 20-pin PDIP (through-hole) Package 5 ns Speed Electrically Erasable (EE) Flash, non-volatile, in-circuit reprogrammable Memory
الحد الأدنى للطلب: 1 |

ATF16V8C-7PU نظرة عامة

The Microchip Technology ATF16V8C-7PU is a high-performance EECMOS electrically-erasable programmable logic device (PLD) providing 8 macrocells and 300 gates of logic in a 20-pin PDIP package, with a 7 ns propagation delay and industrial-grade temperature rating. It is built on Atmel-proven electrically-erasable flash memory technology, giving non-volatile, in-circuit re-programmable logic without UV erase cycles.

A simple programmable logic device (SPLD) is a member of the programmable logic device family, sitting between fixed logic and mask-programmed PAL devices. Where a PAL must be sent to the mask vendor and a GAL/CPLD carries more silicon, an SPLD delivers a small, fixed macrocell array with three configurable operating modes selected automatically by the programming software. In the system hierarchy, an SPLD sits under PLD, under programmable logic, under integrated logic ICs.

Key features of the ATF16V8C-7PU include eight outputs each allocated eight product terms, three automatically configured modes of operation that allow highly complex logic functions, speeds down to 5 ns across the family, and a pin-controlled power-down mode in which supply current falls below 100 microamps. A pin-keeper circuit on each input and output holds the last valid state during power-down, so downstream logic does not see undefined levels on startup. All speed grades are specified over 5 V plus or minus 10 percent for industrial temperature range and 5 V plus or minus 5 percent for commercial range.

Technically, the device is a superset of the generic 16R8 architecture, which allows direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. Eight outputs are each allocated eight product terms, and the pin arrangement accepts the conventional 16V8-style clock, feedback and output-enable assignments used by classic GAL/16V8 designs. The 7 ns speed grade means combinational paths resolve in roughly 7 ns, supporting clock rates near 70 MHz in registered configurations.

Typical applications include legacy 16V8 glue logic, address and control decoding in industrial control equipment, counter and state-machine logic in instrumentation, bus interface decoding in peripheral cards, and retrofits of older designs that need re-programmable logic without changing the board footprint.

When designing with the ATF16V8C-7PU, confirm that pin 4 is used as the power-down control input if low standby current is required; otherwise pin 4 may be used as an ordinary logic input. Use the pin description table in the manufacturer datasheet when assigning PCB tracks, and keep the 0.1 uF decoupling capacitor close to VCC pin 20.

This page consolidates drop-in replacement options, package and pinout details, and practical application guidance for the ATF16V8C-7PU that are not gathered together in the manufacturer datasheet.

بدائل مباشرة لـ ATF16V8C-7PU — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ATF16V8C-7PU (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package, Propagation Delay, Supply Voltage, Architecture Compatibility.

Microchip Technology
Device Type: Electrically Erasable Programmable Logic Device (PLD)
Package: 20-SOIC, 7.50 mm width
Propagation Delay: 10 ns
قارن مع ATF16V8C-7PU →
Microchip Technology
Device Type: Electrically erasable programmable logic device
Package: 20-pin PDIP
Propagation Delay: 15 ns maximum
قارن مع ATF16V8C-7PU →

ATF16V8C-10PU

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 20-PDIP
same 20-pin PDIP footprint and EECMOS flash architecture, but 10 ns propagation delay instead of 7 ns (+43% slower), same supply voltage and pin assignment

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF16V8C-5PU

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 20-PDIP
same 20-pin PDIP footprint, 5 ns propagation delay is 2 ns faster than the 7 ns grade (-29% delay), same macrocell count and supply voltage

📋 بديل مرجعي (غير موجود في الكتالوج)

PALCE16V8

✅ بديل مباشر
📦 20-PDIP
same 20-pin PDIP footprint and standard 16V8 pin assignment, but non-flash erasable technology with slower typical propagation delay and no pin-controlled power-down mode

📋 بديل مرجعي (غير موجود في الكتالوج)

GAL16V8

✅ بديل مباشر
📦 20-PDIP
same 20-pin PDIP footprint and 16V8 logic architecture, but no electrically-erasable flash re-programming and no sub-100 uA pin-controlled power-down input

📋 بديل مرجعي (غير موجود في الكتالوج)

PALCE16V8-10

✅ بديل مباشر
📦 20-PDIP
same 20-pin PDIP footprint, 10 ns speed grade is slower than the 7 ns ATF16V8C-7PU (+43% delay) but offers a widely stocked second-source 16V8 option

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF16V8C-7PU الحدود القصوى والخصائص الكهربائية

Device Type Simple Programmable Logic Device (SPLD), 16V8 family
Macrocell Count 8 macrocells
Gate Count 300 gates
Output Count 8 outputs, 8 product terms each
Propagation Delay 7 ns (ATF16V8C-7 speed grade)
Max Speed in Family 5 ns
Technology EECMOS electrically-erasable CMOS flash
نوع الذاكرة Electrically Erasable (EE) Flash, non-volatile, in-circuit reprogrammable
جهد التغذية 5 V +/- 10% industrial, 5 V +/- 5% commercial
Power-Down Mode Pin-controlled, supply current below 100 uA
Power-Down Control Pin Pin 4
Pin-Keeper Circuits Yes, on inputs and outputs
Modes of Operation 3 modes configured automatically by software
Architecture Compatibility Superset of generic 16R8, direct replacement for 16R8 and most 20-pin combinatorial PLDs
العلبة 20-pin PDIP (through-hole)
Temperature Grade Industrial (-40C to +85C)
Finish Green (lead-free) per part description
Manufacturer Microchip Technology (Atmel heritage)
Programming Standard SPLD programmer / Atmel-type PLD programming algorithm

تكوين أطراف ATF16V8C-7PU

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
دبوس 1 CLK/IN — Clock input in registered mode, logic input otherwise
دبوس 2 IN — Logic input
دبوس 3 IN — Logic input
دبوس 4 PD — Power-down control input; may be used as a logic input when power-down is not required
دبوس 5 GND — Ground
دبوس 6 OUT — Logic output
دبوس 7 OUT — Logic output
دبوس 8 NC — Not connected (per datasheet)
دبوس 9 NC — Not connected (per datasheet)
دبوس 10 NC — Not connected (per datasheet)
دبوس 11 NC — Not connected (per datasheet)
دبوس 12 NC — Not connected (per datasheet)
دبوس 13 NC — Not connected (per datasheet)
دبوس 14 GND — Ground
دبوس 15 NC — Not connected (per datasheet)
دبوس 16 NC — Not connected (per datasheet)
دبوس 17 IN — Logic input
دبوس 18 IN — Logic input
دبوس 19 CLK/IN — Clock input in registered mode, logic input otherwise
دبوس 20 VCC — Positive supply, 5 V

التطبيقات النموذجية

ATF16V8C-7PU مناسب لـ 6 التطبيقs: Legacy 16V8 Glue Logic for Board Revisions, Industrial Control Decode and State Logic, Instrumentation and Test Fixture Timing, Peripheral Card Bus Interface Decoding, Low-Power Handheld and Battery Equipment Logic, Programmable Counter, Divider, and State Machine Logic.

🔧

Legacy 16V8 Glue Logic for Board Revisions

The ATF16V8C-7PU is the natural fit when an existing 20-pin board must absorb a logic change without a respin. Because the device uses electrically-erasable flash memory, the same package can be reprogrammed in circuit or swapped with a programmed part, and the 7 ns propagation delay gives more timing margin than the older 10 ns and 15 ns SPLD families. The 20-pin PDIP footprint matches the standard 16V8 lead pattern, so existing footprints and pin assignments carry over. This makes the part a common choice for repairing and upgrading legacy instrumentation, test fixtures, and industrial control boards where the original PAL or GAL logic has been discontinued.

🏭

Industrial Control Decode and State Logic

Control boards that decode address and control buses often need a compact, re-programmable block of decode logic with defined states during startup. The ATF16V8C-7PU provides 8 macrocells and 300 gates with 8 product terms per output, enough for address decode, interlock sequencing, and alarm latching in one device. Its pin-keeper circuits hold input and output levels through power-down so the downstream microcontroller does not read undefined pins during reset. The industrial temperature rating and 5 V plus or minus 10 percent supply window suit factory-floor equipment, and in-circuit flash re-programming allows the same board to serve several product variants.

🧰

Instrumentation and Test Fixture Timing

Test and measurement fixtures often need fast, deterministic combinational paths to trigger measurement sequences and drive instrument control lines. The 7 ns propagation delay of the ATF16V8C-7PU supports register-clocked sequencing well beyond the rate that older 15 ns SPLDs could reach, while keeping the design in a single 20-pin through-hole device. The three automatically configured operating modes allow complex combinational and registered functions to be implemented in one part, reducing the number of discrete gates needed. For fixture makers replicating vintage instrument logic, the standard 16V8 pinout keeps hand-wired and socketed prototyping straightforward.

🖥️

Peripheral Card Bus Interface Decoding

Expansion cards in legacy computer and industrial peripheral systems frequently need address decode and chip-select logic that can be re-programmed across board revisions. The ATF16V8C-7PU implements the decode in a single 20-pin PDIP device with three software-selected modes, so one part can cover simple combinational decode, complex decode, or registered address latching. Its status as a superset of the generic 16R8 architecture means it can directly replace 16R8 and many 20-pin combinatorial PLDs already present in such designs. The 7 ns grade adds margin on marginal bus timing paths that originally used 10 ns or 15 ns devices.

📱

Low-Power Handheld and Battery Equipment Logic

Battery-operated and portable equipment benefits from a logic device that can be parked in a low-draw state between active measurement cycles. The ATF16V8C-7PU offers a pin-controlled power-down mode in which supply current falls below 100 microamps when pin 4 is driven high, and the pin-keeper circuits preserve the last valid logic state so the display, sensor front end, or radio is not disturbed by undefined levels on wake-up. Using the same 20-pin PDIP footprint as legacy designs allows a low-power redesign to drop into an existing through-hole layout without respinning the board.

⚙️

Programmable Counter, Divider, and State Machine Logic

Multi-stage counters, ripple dividers, and cyclic state machines map directly onto the ATF16V8C-7PU macrocell array. Eight outputs with eight product terms each give enough depth for a multi-bit counter with registered outputs, while the software-selected operating modes automatically apply the appropriate feedback structure during programming. The 7 ns propagation delay shortens the loop delay in ripple-carry counting compared with 10 ns and 15 ns SPLD grades, reducing the maximum count rate for a given design. Flash-based configuration also means a counter sequence or state table can be updated in the field without a socketed programmer or a factory trip.

ملخص المنتجات الموصى بها

ATF16V8C-10PU Same-family slower speed grade for cost-sensitive rework يُستخدم في: Legacy 16V8 Glue Logic for Board Revisions, Industrial Control Decode and State Logic, Peripheral Card Bus Interface Decoding, Programmable Counter, Divider, and State Machine Logic PALCE16V8 Second-source 16V8 for production continuity يُستخدم في: Legacy 16V8 Glue Logic for Board Revisions, Programmable Counter, Divider, and State Machine Logic MC74F538N onsemi يُستخدم في: Industrial Control Decode and State Logic ATF16V8C-5PU Faster same-family grade for higher-rate fixture sequencing يُستخدم في: Instrumentation and Test Fixture Timing, Low-Power Handheld and Battery Equipment Logic CS82C54-12 Renesas Electronics يُستخدم في: Instrumentation and Test Fixture Timing DS90C387VJD-TI Texas Instruments يُستخدم في: Peripheral Card Bus Interface Decoding AK4495EQ AKM (Asahi Kasei Microdevices) يُستخدم في: Low-Power Handheld and Battery Equipment Logic
What is ATF16V8C-7PU?
The ATF16V8C-7PU is a Microchip Technology (Atmel) simple programmable logic device in the 16V8 family, providing 8 macrocells and 300 gates of non-volatile, electrically-erasable CMOS flash logic in a 20-pin PDIP package. According to the manufacturer datasheet, it is a high-performance EECMOS PLD built on Atmel's proven electrically-erasable flash memory technology, with a 7 ns propagation delay for this speed grade and a pin-controlled power-down mode that reduces supply current to below 100 microamps.
What are the key specifications of ATF16V8C-7PU that engineers should know?
The ATF16V8C-7PU combines 8 macrocells, 300 gates, 8 outputs with 8 product terms each, a 7 ns propagation delay, 5 V operation (plus or minus 10 percent industrial), and a 20-pin PDIP package in a single device. According to the Microchip ATF16V8C datasheet, three operating modes are configured automatically by the programming software, allowing complex logic functions, and the device is a superset of the generic 16R8 architecture for direct replacement of the 16R8 family and most 20-pin combinatorial PLDs.
Where to download the ATF16V8C datasheet PDF?
The ATF16V8C datasheet PDF is published by Microchip Technology and covers the full ATF16V8C family, including the ATF16V8C-7PU 7 ns industrial 20-pin PDIP grade. Download it from the manufacturer product page at https://www.microchip.com/en-us/product/ATF16V8C or directly from the device document PDF hosted at ww1.microchip.com. For programming and file-format information, request the corresponding SPLD programming specification alongside the datasheet.
Where to find the ATF16V8C pinout?
The ATF16V8C pinout is documented in the manufacturer datasheet, which shows the 20-pin PDIP lead assignments for the standard 16V8 pinout used by the device family. Key locations are pin 20 for VCC, pins 5 and 14 for ground, and pin 4 for the power-down control input. Use the pin description table in the ATF16V8C datasheet when assigning PCB tracks and when verifying that an existing 20-pin board footprint matches the ATF16V8C-7PU.
What is the operating voltage and temperature range of the ATF16V8C-7PU?
The ATF16V8C-7PU operates from a 5 V supply, specified as 5 V plus or minus 10 percent over the industrial temperature range and 5 V plus or minus 5 percent for the commercial range. The -7PU suffix identifies the 7 ns speed grade in the 20-pin PDIP industrial package. Because all speed ranges in the family are specified across the full voltage window, timing margins are valid without de-rating at 4.5 V or 5.5 V.
ATF16V8C-7PU vs ATF16V8B-15PC - which is better for a legacy 20-pin design?
The ATF16V8C-7PU is the better choice for most 20-pin legacy designs because it is a 7 ns EECMOS flash device with three software-selected operating modes and a power-down input on pin 4. The ATF16V8B-15PC is a 15 ns SPLD in a 20-pin PLCC surface-mount package, so it is not a footprint-compatible substitute for a through-hole 20-pin PDIP design. ATF16V8B parts are also non-EEROM erasable in the same way, so a board rework is required rather than a simple swap.
ATF16V8C-7PU vs PALCE16V8 - which is better for new 16V8 glue logic?
The ATF16V8C-7PU is generally better for new designs because it offers a 7 ns speed grade, electrically-erasable flash technology for in-circuit re-programming, and three operating modes configured automatically by software. The PALCE16V8 family is a mature, widely supported 16V8 architecture that remains a valid choice when lowest cost and maximum legacy software support matter more than reprogrammability or propagation delay. Neither part requires any change to standard 16V8 board-level logic assignment.
When should I choose ATF16V8C-7PU over ATF16V8C-10PU?
Choose the ATF16V8C-7PU when timing margin matters and the design runs near the logic family's clock ceiling, since it resolves combinational paths in 7 ns versus 10 ns for the ATF16V8C-10PU. Select the ATF16V8C-10PU when the design is timing-insensitive and cost is the deciding factor. Both share the same 20-pin PDIP footprint, the same EECMOS flash architecture, and the same 5 V supply, so the choice is purely speed grade versus cost.
Is the ATF16V8C-7PU suitable for industrial control equipment?
Yes, the ATF16V8C-7PU is rated for industrial temperature range in a 20-pin PDIP through-hole package, and the manufacturer specifies all speed ranges over 5 V plus or minus 10 percent for industrial operation. It is a common fit for industrial control boards that need re-programmable decode and state logic without changing the PCB, and the in-circuit flash erase capability lets a field technician update logic without a programmer on site.
What is the best drop-in replacement for ATF16V8C-7PU?
The closest drop-in replacements that keep the 20-pin PDIP footprint and standard 16V8 pin assignment are the ATF16V8C-10PU and ATF16V8C-5PU from the same Microchip family, plus the Lattice PALCE16V8 and GAL16V8 devices in 20-pin PDIP. Choose ATF16V8C-10PU for a slower, lower-cost version of the same architecture, and the Lattice parts where a proven second-source 16V8 is required. Verify the pinout and speed grade in the manufacturer datasheet before substitution.
Can a GAL16V8 replace the ATF16V8C-7PU?
A GAL16V8 can replace the ATF16V8C-7PU in most applications because the two devices share the same 16V8 architecture, the same 20-pin PDIP footprint, and the same standard pin configuration for clock, feedback, output-enable and data inputs. The trade-offs are speed and technology: the ATF16V8C-7PU offers a 7 ns propagation delay, electrically-erasable flash re-programmability, three automatically selected operating modes, and a pin-controlled power-down mode that the classic GAL16V8 does not offer.
What can replace ATF16V8C-7PU in an obsolete 16V8 design?
Drop-in replacements for the ATF16V8C-7PU include the same-family ATF16V8C-10PU and ATF16V8C-5PU, plus the Lattice PALCE16V8 and GAL16V8 families in 20-pin PDIP, all of which use the standard 16V8 pin assignment. Because the ATF16V8C is a superset of the generic 16R8 architecture, many 16R8 and combinatorial 20-pin designs can also be converted without rewiring. Confirm the operating-mode requirements of the original design before committing to a substitute.
Where to buy ATF16V8C-7PU online?
The ATF16V8C-7PU is available from authorized distributors and directly from the manufacturer, which lists the part in 20-pin PDIP with green finish in industrial temperature grade. To obtain current pricing, stock position and a scheduled delivery for this exact 20-pin PDIP 7 ns grade, submit the Request a Quote form on this page and include the target quantity and date code requirement. Manufacturer direct and authorized channels can also be contacted for long-lead or scheduled-production quantities.
What is the price of ATF16V8C-7PU?
Pricing for the ATF16V8C-7PU depends on quantity, date code, and supply channel, and it changes continuously, so no fixed figure is published on this page. Use the Request a Quote form on this page with your required quantities and it will be quoted against current market conditions for the 20-pin PDIP industrial 7 ns grade. Bulk quantities, tube packaging, and scheduled-production orders are quoted separately from single-piece prototyping quantities.
What is the lead time for ATF16V8C-7PU?
Lead time for the ATF16V8C-7PU depends on the quantity ordered, the date code required, and whether the order is a standard stock buy or a scheduled-production buy. The manufacturer lists the device as in stock for immediate-order quantities and separately supports scheduled production with delivery commitments. Submit the Request a Quote form on this page with the quantity and required delivery date, and a lead time commitment will be returned in the quotation.
How do I program the ATF16V8C?
The ATF16V8C is programmed with a standard SPLD programmer using the fuse-map and JEDEC-style file formats common to the 16V8 family, and Microchip's ATF16V8C family is supported by the common universal programmers listed in the device documentation. Because the ATF16V8C-7PU uses electrically-erasable flash memory, the logic can be erased and rewritten in the circuit without ultraviolet erase, which simplifies field updates. Refer to the manufacturer programming specification and the device data sheet for pin 4 power-down handling and pin-keeper behaviour.
Is ATF16V8C-7PU the same as ATF16V8C-7JU?
No, the ATF16V8C-7JU and ATF16V8C-7PU differ in package, not in speed grade or logic. The ATF16V8C-7JU is the 20-pin PLCC surface-mount variant of the 7 ns industrial grade, while the ATF16V8C-7PU is the 20-pin PDIP through-hole variant. Both share the same 16V8 architecture, 8 macrocells, 300 gates, EECMOS flash technology and 5 V supply, so the logic design is identical; only the PCB footprint and mechanical mounting differ.

بيانات مرجعية هندسية لـ ATF16V8C-7PU — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ATF16V8C-7PU when you need a 16V8-class logic block that is re-programmable in circuit, supports a pin-controlled low-power standby below 100 microamps, and has enough timing margin for near-70 MHz register clocking. Its 20-pin PDIP footprint and standard 16V8 pin assignment mean it drops into existing legacy board layouts without rewiring. Select the ATF16V8C-10PU when timing is not critical and unit cost dominates, or the ATF16V8C-5PU when you need extra speed margin on the same footprint and architecture. Reach for a Lattice PALCE16V8 or GAL16V8 in 20-pin PDIP when supply continuity or maximum legacy software support matters more than flash re-programmability and standby current, accepting the loss of the power-down pin and in-circuit erase. Avoid surface-mount PLCC variants such as the ATF16V8C-7JU unless you are prepared to change the PCB footprint. Always confirm the mode requirements and pin 4 usage from the manufacturer datasheet before substituting any equivalent.

المقارنة مع البدائل

المعامل هذا المنتج ATF16V8C-10PU ATF16V8C-5PU PALCE16V8 GAL16V8 PALCE16V8-10
Package 20-PDIP 20-PDIP - same 20-PDIP - same 20-PDIP - same 20-PDIP - same 20-PDIP - same
Brand Microchip Technology Microchip Technology Microchip Technology Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Macrocell / Gate Count 8 macrocells / 300 gates 8 macrocells / 300 gates 8 macrocells / 300 gates 16V8 family, 8 macrocells 16V8 family, 8 macrocells 16V8 family, 8 macrocells
Pin-Controlled Power-Down Mode Yes, pin 4, supply current below 100 uA Yes, pin 4, below 100 uA Yes, pin 4, below 100 uA Not available Not available Not available
Architecture Compatibility Superset of generic 16R8, replaces most 20-pin combinatorial PLDs Superset of generic 16R8 Superset of generic 16R8 16V8 family architecture 16V8 family architecture 16V8 family architecture

أبرز الفروقات

  • Faster propagation delay within the same 20-pin PDIP family footprint (مقابلATF16V8C-10PU)
  • In-circuit re-programmability and low-power standby that legacy 16V8 devices lack (مقابلGAL16V8)
  • Three software-selected operating modes and 16R8 superset compatibility (مقابلPALCE16V8)

ملاحظات التصميم

Pin 4 is a dual-function pin on the ATF16V8C family. If your design drives pin 4 high as a logic input, the device will interpret it as a power-down request and the supply current will drop below 100 microamps, which can starve the logic and cause erratic behaviour. Confirm the intended use of pin 4 from the pin description table in the manufacturer datasheet before layout, and reserve that net for a pull-down if the power-down feature is not used.

Place a 0.1 uF ceramic decoupling capacitor as close as possible to VCC (pin 20) with the ground return tied directly to the ground plane, and add a bulk capacitor near the supply source for the switching transients of nearby regulators. Because the ATF16V8C-7PU is specified across 5 V plus or minus 10 percent for industrial operation, verify the supply tolerance at the actual connector and connector pin, not just at the regulator output. In power-down mode the device draws under 100 microamps, so any residual leakage in the surrounding analog section can dominate the standby budget.

This is a through-hole 20-pin PDIP part, so fan-out and signal integrity are generally more forgiving than on a surface-mount PLD, but the clock and feedback nets still deserve controlled routing. Keep the pin 1 clock trace short and away from switching nodes and inductor loops, and route the ground leads (pins 5 and 14) directly to the ground plane rather than through a shared trace. Because the device is a superset of the generic 16R8 architecture, existing 20-pin footprints can be reused directly, so verify the DIP outline and lead pitch against the existing board rather than assuming a drop-in mechanical fit.

Estimated power figure for planning only: at the worst-case 5.5 V supply with all eight outputs driving low-impedance loads, the internal logic dissipation is typically under 100 mW, so no heat sink is required in this through-hole package. The larger thermal concern in most designs is the surrounding system, not the PLD itself. In power-down mode the supply current falls below 100 microamps, and the pin-keeper circuits hold the last valid state on inputs and outputs, so downstream logic will not see undefined levels during power cycling.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Part listings describe the ATF16V8C-7PU as green (lead-free) finish in a 20-pin PDIP industrial package. RoHS, REACH, halogen-free and conflict-minerals statements are not stated on the manufacturer material and are therefore recorded as unknown. AEC-Q100 qualification is not applicable to this industrial-grade PLD.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ATF16V8C-7PU atf16v8c datasheet atf16v8c programmer atmel atf16v8c ATF16V8C-7PU datasheet pdf ATF16V8C pinout 20 pin PDIP ATF16V8C-7PU replacement ATF16V8C-7PU vs ATF16V8C-10PU 16V8 SPLD 300 gate PLD Microchip ATF16V8C-7PU ATF16V8C-7PU price ATF16V8C-7PU stock ATF16V8C pin 4 power down ATF16V8C-7PU industrial control glue logic

المكونات والمصطلحات ذات الصلة

Microchip Technology Atmel ATF16V8C-7PU ATF16V8C ATF16V8C-10PU ATF16V8C-5PU ATF16V8C-7JU PALCE16V8 GAL16V8 SPLD simple programmable logic device PLD programmable logic device EECMOS electrically-erasable flash non-volatile logic 16V8 architecture 16R8 macrocell product term pin-keeper circuit power-down control pin 20-pin PDIP DIP package through-hole 7 ns propagation delay RoHS REACH green lead-free finish
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر