Microchip Technology

ATF16V8CZ-12JX - 12ns 8-Macrocell PLD | Microchip

MPN: ATF16V8CZ-12JX ✓ نشط
5 V Vdss 20-pin J-lead PLCC, 9 mm x 9 mm Package
الحد الأدنى للطلب: 1 |

ATF16V8CZ-12JX نظرة عامة

Microchip Technology ATF16V8CZ-12JX is a high-performance electrically erasable programmable logic device with 8 macrocells, a 12 ns maximum pin-to-pin delay, and a 5 V supply. It is packaged in a 20-pin J-lead PLCC measuring 9 mm by 9 mm. The device supports up to 16 inputs, eight configurable I/O outputs, 250 gates, and CMOS- and TTL-compatible interfaces.

An EEPLD, or electrically erasable programmable logic device, combines programmable AND-array logic, OR-array logic, and output macrocells in a reusable CMOS semiconductor. Its position in the logic hierarchy is EEPLD to SPLD to programmable logic device to integrated logic IC. The ATF16V8CZ architecture extends the capabilities of 16R8 devices and most 20-pin combinatorial PLDs, allowing one package to implement compact combinational or registered control logic.

The principal features include 12 ns maximum propagation delay, 25 µA standby power, zero-power operation, eight macrocells, and eight outputs allocated eight product terms each. Three operating modes are selected automatically by programming software. This combination supports interface decoding, address decoding, state-machine control, bus arbitration, and legacy PAL replacement while allowing the device to be reprogrammed rather than replaced for logic revisions.

Each output macrocell supports combinational, registered, or complex combinatorial operation, while eight dedicated input pins extend the total input capability to 16. The electrically erasable Flash-memory configuration permits repeated programming with dedicated software. CMOS- and TTL-compatible inputs and outputs facilitate use in mixed legacy systems, although designers should verify every external signal against the complete timing and electrical limits before finalizing a system.

Typical uses include peripheral control, industrial equipment, instrumentation, test systems, and small control subsystems where one PLCC can consolidate multiple gates. It is also appropriate for replacing compatible 16R8 and selected 20-pin combinatorial PLDs after confirming pinout, speed, power, and temperature requirements. A new design should also consider whether a current CPLD or FPGA provides useful additional capacity or features.

The principal design constraint is timing margin at the specified 12 ns speed grade. Treat 12 ns as the maximum pin-to-pin delay rather than a guaranteed system settling time, and include external logic, interconnect, skew, and setup-and-hold requirements in the timing budget. Follow the manufacturer pin-assignment table and recommended decoupling guidance when laying out the PCB.

This product page combines the manufacturer device architecture, package and timing characteristics, substitution relationships, and practical selection guidance. It is intended to accelerate engineering review while making clear which parameters require final confirmation against the current Microchip documentation.

بدائل مباشرة لـ ATF16V8CZ-12JX — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ATF16V8CZ-12JX (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package.

Microchip Technology
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
Package: 20-pin PLCC J-lead, 9 x 9 mm
قارن مع ATF16V8CZ-12JX →

ATF16V8CZ-15JU

✅ بديل مباشر
📦 20-PLCC (9x9)
Maximum propagation delay is 15 ns versus 12 ns, making the substitute 25% slower; ATF16V8C architecture and package format are retained.

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF16V8CZ-12JU

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 20-PLCC (9x9)
Maximum propagation delay differs by 0 ns at 12 ns; the distinction is the JU suffix grade rather than speed or package.

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF16V8CZ-10JU

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 20-PLCC (9x9)
Maximum propagation delay is 10 ns versus 12 ns, providing approximately 16.7% more nominal speed margin while retaining the 20-PLCC format.

📋 بديل مرجعي (غير موجود في الكتالوج)

ATF16V8CZ-12JC

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 20-PLCC (9x9)
Simple Programmable Logic Device (SPLD) · ATF16V8CZ · 250 gates · 8 · 16 · 8 · 12 ns · 83 MHz

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATF16V8CZ-15JC

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 20-PLCC (9x9)
Electrically Erasable Programmable Logic Device (EEPLD) · 16V8 · 250 gates · 8 macrocells · 16 inputs · 8 I/Os · 8 product terms · 5 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATF16V8CZ-12JX الحدود القصوى والخصائص الكهربائية

Device Type High-performance electrically erasable programmable logic device
Maximum Pin-to-Pin Delay 12 ns
جهد التغذية 5 V
Macrocell Count 8 macrocells
Gate Equivalent Count 250 gates
Maximum Input Count 16 inputs
Configurable I/O Count 8 I/Os
Output Count 8 outputs
Product Terms per Output 8 product terms
Operating Modes 3 automatically configured modes
Standby Power 25 µA
Power Consumption Zero power
Logic Compatibility CMOS and TTL compatible
العلبة 20-pin J-lead PLCC, 9 mm x 9 mm
نوع التركيب Surface mount
Configuration Technology Electrically erasable Flash memory

دليل تكوين أطراف ATF16V8CZ-12JX 20-pin j-lead plcc, 9 mm x 9 mm

تكوين الأطراف لـ ATF16V8CZ-12JX (حزمة 20-pin j-lead plcc, 9 mm x 9 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 20-pin j-lead plcc, 9 mm x 9 mm لـ ATF16V8CZ-12JX

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATF16V8CZ-12JX.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ATF16V8CZ-12JX مناسب لـ 6 التطبيقs: Peripheral Interface Control, Address and Command Decoding, Industrial Equipment Sequencing, Legacy PAL and 16R8 Replacement, Test and Measurement Control, Bus Arbitration and Resource Control.

🔧

Peripheral Interface Control

The ATF16V8CZ-12JX fits compact peripheral-control blocks because its 8 macrocells can implement registered command, address, and handshake decoding while eight configurable I/Os support the external interface. Its 12 ns maximum pin-to-pin delay provides useful timing margin for moderate-speed control paths, and the 5 V operating supply matches many legacy TTL-compatible systems. The device is placed between a host bus and peripheral logic, with the programmed output macrocells controlling selects, enables, and status signals. The main design consideration is to evaluate the complete path through bus drivers, interconnect, and receiving logic rather than relying on the 12 ns device rating alone.

🖥️

Address and Command Decoding

ATF16V8CZ-12JX is well suited to decoding addresses, register selects, and system commands because eight output macrocells can be configured automatically by the programming software. Up to 16 inputs provide sufficient width for address and control signals, while the 12 ns speed class supports common low-to-moderate-speed processor and bus arrangements. In implementation, the device is programmed with the required Boolean equations and connected to the relevant bus lines and output enables. Engineers should calculate setup and hold requirements against the actual bus timing, and ensure unused I/O pins are terminated according to the manufacturer configuration guidance.

🏭

Industrial Equipment Sequencing

The ATF16V8CZ-12JX can consolidate machine-control sequencing, interlock logic, and actuator-command decoding into one 8-macrocell device. Its electrically erasable configuration allows logic revisions without changing the PCB, and the 12 ns maximum delay supports deterministic control paths in equipment operating below demanding real-time frequencies. A practical circuit uses the programmable outputs to coordinate motors, relays, indicators, or measurement functions through external drivers. The X suffix grade, supply tolerance, operating-temperature range, and isolation requirements must be checked for each industrial installation before production release.

🔧

Legacy PAL and 16R8 Replacement

ATF16V8CZ-12JX can replace many 16R8-family and 20-pin combinatorial PLD designs because its architecture is described as a superset of the generic 16R8 arrangement. Eight macrocells and eight outputs provide enough resources for small combinational and registered functions, while electrically erasable Flash memory permits updated equations for engineering corrections or product variants. Migration should begin with a pin-by-pin comparison against the original device and a check of edge-sensitive versus combinational behavior. If the original design operates beyond the 12 ns grade's timing capability, use the 10 ns family option instead of accepting less margin.

📺

Test and Measurement Control

The ATF16V8CZ-12JX is useful for small instrumentation control blocks that coordinate operating modes, range selects, relay commands, and status reporting. Eight programmable I/Os can handle several discrete controls, while the 12 ns delay avoids adding substantial propagation delay to moderate-speed measurement paths. It is typically programmed to implement a state-dependent command matrix and then connected to external relays, switches, amplifiers, or data-acquisition circuitry. Signal-integrity and grounding practices remain important because the PLD itself cannot compensate for long unprotected input routes, switching transients, or unsuitable external drive levels.

🌐

Bus Arbitration and Resource Control

ATF16V8CZ-12JX can implement compact arbitration, ownership, and resource-enable logic for systems with a limited number of competing bus masters. The device's 8 macrocells and programmable outputs allow request, grant, busy, and interrupt functions to be consolidated, while the 12 ns speed class suits many asynchronous control schemes with sufficient external timing margin. In a typical circuit, request signals enter the PLD and generated grant signals control transceivers or downstream devices. Timing must be evaluated across the master, PLD, and target, including contention cases and recovery behavior before the logic is considered production-safe.

ملخص المنتجات الموصى بها

ATF16V8CZ-12JU Same-family 12 ns PLD option يُستخدم في: Peripheral Interface Control, Industrial Equipment Sequencing, Legacy PAL and 16R8 Replacement ATF16V8CZ-10JU Same-family higher-speed PLD option يُستخدم في: Peripheral Interface Control, Legacy PAL and 16R8 Replacement, Bus Arbitration and Resource Control ATF16V8CZ-12JC Microchip Technology يُستخدم في: Address and Command Decoding, Test and Measurement Control, Bus Arbitration and Resource Control ATF16V8CZ-15JU Same-family lower-speed decoding option يُستخدم في: Address and Command Decoding, Test and Measurement Control ATF16V8CZ-15JC Microchip Technology يُستخدم في: Industrial Equipment Sequencing
What is the ATF16V8CZ-12JX?
The ATF16V8CZ-12JX is a 5 V electrically erasable programmable logic device with 8 macrocells and a 12 ns maximum pin-to-pin delay. According to the Microchip Technology manufacturer datasheet, it provides 250 gate equivalents, up to 16 inputs, eight configurable I/Os, and eight outputs with eight product terms per output. It is housed in a 20-pin J-lead PLCC measuring 9 mm by 9 mm.
What are the key specifications of ATF16V8CZ-12JX?
The ATF16V8CZ-12JX combines a 12 ns maximum pin-to-pin delay, 8 macrocells, 8 outputs, and a 5 V supply in a 20-pin PLCC. The Microchip Technology manufacturer datasheet also identifies 250 gate equivalents, up to 16 inputs, 25 µA standby power, CMOS- and TTL-compatible interfacing, and three automatically configured operating modes. These features place it in the SPLD class for compact programmable control logic.
Where can I download the ATF16V8CZ-12JX datasheet PDF?
The ATF16V8CZ-12JX datasheet PDF is available from the manufacturer-linked technical document hosted for ATF16V8CZ devices. It describes the 12 ns speed grade, 5 V operation, 8 macrocells, three configuration modes, electrical characteristics, programming information, and package details. Use the pin-description table and package drawing in that document when assigning PCB connections.
Where can I find the ATF16V8CZ-12JX pinout?
The ATF16V8CZ-12JX pinout is defined in the ATF16V8CZ manufacturer datasheet under the pin-description and package information sections. The exact ordering and numbering must be taken from the 20-pin PLCC diagram rather than inferred from a generic PAL pinout. That document is the controlling reference for programming, PCB layout, supply connections, clock, and output-enable assignments.
Can ATF16V8CZ-12JX replace a 16R8 or 20-pin combinatorial PLD?
Yes, when the candidate device has a compatible footprint, logic architecture, timing grade, and electrical interface. The Microchip Technology manufacturer datasheet describes the ATF16V8CZ architecture as a superset of generic 16R8 architectures, permitting direct replacement of many 20-pin combinatorial PLDs. A design migration should still verify pin assignments, programming software compatibility, supply requirements, and the 12 ns timing margin.
What can replace the ATF16V8CZ-12JX in a drop-in design?
The ATF16V8CZ-15JU is a documented same-family substitute with the same ATF16V8C base architecture and a 20-pin PLCC format, but its 15 ns speed is 25% slower than the 12 ns ATF16V8CZ-12JX. Other ATF16V8CZ speed and temperature-grade variants may also fit mechanically, but they should be selected only after confirming the exact pinout, operating-temperature range, and system timing.
What is the best Microchip equivalent for ATF16V8CZ-12JX?
The ATF16V8CZ-15JU is the closest documented substitute for an ATF16V8CZ-12JX design that can tolerate slower propagation. It shares the ATF16V8C base product number and package format, while changing maximum delay from 12 ns to 15 ns, a 25% increase. The substitution remains acceptable only when the receiver setup time, system clock period, and worst-case interconnect delay preserve adequate timing margin.
Is ATF16V8CZ-12JX the same as ATF16V8CZ-15JU?
No. Both devices use the ATF16V8C family architecture, but the ATF16V8CZ-12JX has a 12 ns maximum pin-to-pin delay while the ATF16V8CZ-15JU is rated at 15 ns. That makes the 15 JU version 25% slower in maximum propagation delay. A board can be mechanically compatible, but the slower grade is not timing-equivalent for a design that depends on the original 12 ns limit.
ATF16V8CZ-12JX vs ATF16V8CZ-12JU - which should I choose?
Choose ATF16V8CZ-12JU only when its documented temperature grade and other suffix-specific ratings meet the application while retaining the 12 ns speed class. The ATF16V8CZ-12JX is the specified X-suffix option in a 20-pin PLCC, while the JU option is a distinct orderable grade. Review the manufacturer ordering table before substitution because package suffix, temperature range, and qualification requirements can differ even when the speed rating matches.
When should I choose ATF16V8CZ-12JX instead of a CPLD or FPGA?
Choose the ATF16V8CZ-12JX when the design needs only 8 macrocells, no more than 16 inputs, eight I/O outputs, and a compact 12 ns SPLD solution. A CPLD or FPGA is preferable when the design needs more I/O, deeper logic, greater clocking resources, wider bus interfaces, configuration flexibility, or field updates at a larger scale. The ATF16V8CZ architecture is well suited to small, fixed control-logic blocks.
Is ATF16V8CZ-12JX suitable for industrial control logic?
The ATF16V8CZ-12JX is suitable for compact control-logic functions where its 8 macrocells, 12 ns delay, and 5 V operation satisfy the design. The specific X-suffix operating-temperature rating must be confirmed against the enclosure temperature and the manufacturer ordering information before deployment. Industrial suitability also depends on EMC, surge, environmental, and production-test requirements beyond the device's basic logic specifications.
What power and thermal design considerations apply to ATF16V8CZ-12JX?
The ATF16V8CZ-12JX operates from 5 V and has a specified standby current of 25 µA, but active switching and internal configuration activity determine the real device load. According to the Microchip Technology manufacturer datasheet, the device supports zero-power operation when inactive. Place the required supply and ground connections directly to the device pins, follow the recommended decoupling arrangement, and evaluate worst-case ambient temperature and logic activity.
How much timing margin does a 12 ns PLD provide?
A 12 ns maximum pin-to-pin delay is a device limit, not a guaranteed end-to-end settling time. External gate delay, interconnect delay, skew, receiver setup time, and clock uncertainty must be added before deciding whether the path meets the target frequency. The Microchip Technology manufacturer datasheet supplies the timing definitions; use conservative corner analysis and keep the complete path comfortably below the relevant clock period.
What programming tools are used for ATF16V8CZ-12JX?
The ATF16V8CZ-12JX is programmed as an electrically erasable PLD using software that selects its combinational or registered operating mode. The manufacturer identifies low-cost, easy-to-use software tools for ATF16V8CZ devices, while third-party PLD utilities may also support the architecture. Confirm the tool version, device database, programmer support, and fuse-file compatibility before using it in production.
Where can I buy ATF16V8CZ-12JX and what is the lead time?
Use the Request a Quote form on this page to request ATF16V8CZ-12JX availability, current lead time, and an order quotation. The device is a 20-pin PLCC with 8 macrocells and a 12 ns speed grade. The manufacturer product page and current catalog listings indicate that the ATF16V8CZ family remains active, but production quantity and delivery timing should be confirmed directly for the exact suffix and package.

بيانات مرجعية هندسية لـ ATF16V8CZ-12JX — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Select the ATF16V8CZ-12JX when the design requires the original 12 ns speed grade, eight macrocells, eight programmable outputs, and a 20-pin PLCC footprint. It is a practical choice for compact decoding, sequencing, interface control, and compatible 16R8 replacements. Use ATF16V8CZ-15JU only when the slower 15 ns maximum delay remains acceptable. ATF16V8CZ-12JU and ATF16V8CZ-12JC retain the 12 ns speed class but require confirmation of their suffix-specific temperature and qualification requirements. Consider ATF16V8CZ-10JU when additional timing margin is valuable. For designs requiring more than eight macrocells, more than eight I/Os, complex clocking, or larger logic capacity, move to a CPLD or FPGA instead of forcing the design into this SPLD.

المقارنة مع البدائل

المعامل هذا المنتج ATF16V8CZ-15JU ATF16V8CZ-12JU ATF16V8CZ-10JU ATF16V8CZ-12JC ATF16V8CZ-15JC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-PLCC (9x9) 20-PLCC (9x9) 20-PLCC (9x9) 20-PLCC (9x9) 20-PLCC (9x9) 20-PLCC (9x9)
Maximum Pin-to-Pin Delay 12 ns 15 ns 12 ns 10 ns 12 ns 15 ns
Macrocell Count 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells
Gate Equivalent Count 250 gates 250 gates 250 gates 250 gates 250 gates 250 gates
Input Count Up to 16 inputs Up to 16 inputs Up to 16 inputs Up to 16 inputs Up to 16 inputs Up to 16 inputs
Output Count 8 outputs 8 outputs 8 outputs 8 outputs 8 outputs 8 outputs
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Standby Current 25 µA 25 µA 25 µA 25 µA 25 µA 25 µA
Logic Interface Compatibility CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible

أبرز الفروقات

  • Faster speed class than the documented 15 ns substitute (مقابلATF16V8CZ-15JU)
  • Same-speed 20-pin PLCC family options (مقابلATF16V8CZ-12JU)
  • Additional timing margin for more demanding paths (مقابلATF16V8CZ-12JU)

ملاحظات التصميم

Treat the 12 ns maximum pin-to-pin delay as one component of the complete timing path. Add external driver delay, interconnect delay, skew, receiver setup time, and clock uncertainty before assigning a system operating frequency. For asynchronous handshakes, verify both hold and recovery requirements. The 10 ns ATF16V8CZ family option can add timing margin when the existing design operates close to the limits of the 12 ns grade.

Use the exact 20-pin PLCC pin-description table from the manufacturer documentation when assigning traces and programming the device. Place the decoupling capacitor close to the supply and ground pins, keep the path through the power loop short, and route clock and sensitive control inputs away from noisy switching nodes. Inspect the PLCC pad layout for solder bridges and verify assembly clearances before releasing the PCB.

Do not assume that mechanically similar ATF16V8CZ order codes are automatically equivalent. Confirm the speed grade, suffix-specific temperature rating, package code, and pin configuration for every substitution. A 12 ns and a 15 ns part differ by 25% in maximum propagation delay, which can break a design operating with limited timing margin. Validate the programmed function and all interface states on prototypes before production use.

The ATF16V8CZ-12JX operates from 5 V and specifies 25 µA standby current with zero-power operation when inactive. Provide local high-frequency bypass in addition to bulk supply capacitance and route return current without sharing long paths with switching loads. Verify active current and temperature rise in the final enclosure because external drivers and nearby circuitry can contribute more system heat than the PLD itself.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer product page identifies a green package, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. The device is not presented as an automotive-qualified AEC-Q100 variant.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ATF16V8CZ-12JX datasheet ATF16V8CZ-12JX datasheet pdf ATF16V8CZ-12JX pinout ATF16V8CZ-12JX equivalent ATF16V8CZ-12JX replacement ATF16V8CZ-12JX cross reference ATF16V8CZ-12JX vs ATF16V8CZ-15JU ATF16V8CZ-12JX footprint ATF16V8CZ 20 PLCC programmable logic Microchip ATF16V8CZ-12JX ATF16V8CZ-12JX price ATF16V8CZ-12JX stock

المكونات والمصطلحات ذات الصلة

Microchip Technology ATF16V8CZ-12JX ATF16V8CZ-15JU ATF16V8CZ-12JU ATF16V8CZ-10JU ATF16V8CZ-12JC ATF16V8CZ-15JC ATF16V8C EEPLD electrically erasable programmable logic device SPLD simple programmable logic device programmable logic device integrated logic IC 16R8 20-pin combinational PLD macrocell product term Flash memory CMOS TTL PLCC J-lead package surface mount 12 ns pin-to-pin delay
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر