Microchip Technology

ATTINY11-6PC - 8-Bit 6MHz AVR MCU | Microchip Technology

MPN: ATTINY11-6PC ✗ انتهى عمره الإنتاجي
4 V to 5.5 V Vdss 8-pin PDIP Package 6 MHz Speed 1 KB Memory
الحد الأدنى للطلب: 1 |

ATTINY11-6PC نظرة عامة

The Microchip Technology ATTINY11-6PC is an 8-bit AVR RISC microcontroller with 1 KB of Flash program memory, a 6 MHz internal clock, and six I/O lines, housed in an 8-pin PDIP package. Its 4 V to 5.5 V operating supply range makes it suitable for conventional 5 V control systems. The device also provides 32 general-purpose working registers, an 8-bit timer/counter, internal and external interrupts, a watchdog timer with an internal oscillator, and selectable power-saving modes.

An 8-bit microcontroller is a compact digital controller that executes programmed instructions, reads input signals, controls output devices, and manages timing functions. The ATtiny11 belongs to the AVR RISC architecture and the ATtiny microcontroller family. Within the product hierarchy, this component is a microcontroller, a programmable semiconductor IC, and ultimately a general-purpose embedded-control device. Its small memory footprint and limited I/O count make it most appropriate for compact, cost-sensitive automation rather than complex communications or high-volume data processing.

The ATTINY11-6PC combines 1 KB of Flash memory with 32 working registers and a 6 MHz operating speed. Its six I/O lines provide access to external buttons, indicators, logic inputs, and small control loads. A programmable watchdog timer can reset the controller if the main program stops responding, while internal and external interrupts allow event-driven firmware operation. Idle mode stops the CPU, and the device also offers a second software-selectable power-saving mode for reducing consumption between useful activities.

The AVR architecture uses a reduced-instruction-set computing core designed for compact embedded systems. The 6 MHz internal oscillator simplifies clock design because an external crystal is not required for the listed operating mode. Program storage is organized as 1 KB of Flash, while the associated program-memory data width is listed as 512 × 16 bits. The 8-pin PDIP format supports conventional through-hole assembly, breadboarding, prototyping, and educational or legacy production boards where a surface-mount package would be inconvenient.

Typical uses include simple relay controllers, indicator and pushbutton interfaces, compact sequencing controls, educational timer projects, and low-cost peripheral-control modules. The 4 V to 5.5 V supply range accommodates regulated 5 V systems, while the watchdog timer adds useful supervision for unattended equipment. For designs requiring more program memory, more I/O, or additional communication peripherals, a larger ATtiny-family device may be preferable.

PCB designers should confirm the exact 8-pin assignment against the Microchip datasheet before routing signals, especially for programming and reset-related functions. The power and ground pins require careful placement of bypass capacitance, and external signals must remain within the device's 4 V to 5.5 V supply limits. Firmware should also include watchdog-handling logic when the watchdog is enabled.

This product page combines the manufacturer's device summary with practical selection guidance, pinout information, design notes, and a constraint-aware comparison of possible replacements. It is intended to help engineers evaluate whether the ATTINY11-6PC's 1 KB memory, 6 MHz clock, six I/O lines, and 8-pin PDIP package match a new or existing design.

بدائل مباشرة لـ ATTINY11-6PC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

ATTINY11-6PC الحدود القصوى والخصائص الكهربائية

Product Type 8-bit AVR RISC microcontroller
Maximum CPU Frequency 6 MHz
Flash Program Memory 1 KB
Program Memory Data Width 512 × 16 bits
General-Purpose Working Registers 32 registers
Number of I/O Lines 6 lines
جهد التغذية التشغيلي 4 V to 5.5 V
Timer/Counter 1 × 8-bit timer/counter
Interrupt Support Internal and external interrupts
Watchdog Timer Programmable watchdog timer with internal oscillator
Oscillator Internal oscillator
Power-Saving Modes 2 software-selectable modes, including Idle mode
العلبة 8-pin PDIP
نوع التركيب Through-hole
درجة حرارة التشغيل -40 °C to 85 °C
Core Architecture AVR RISC

تكوين أطراف ATTINY11-6PC

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
دبوس 1 PB3/MOSI — General-purpose input/output pin PB3 and programming data input
دبوس 2 PB4 — General-purpose input/output pin PB4
دبوس 3 GND — Ground reference
دبوس 4 VCC — Power supply input
دبوس 5 PD2 — General-purpose input/output pin PD2
دبوس 6 PD1 — General-purpose input/output pin PD1
دبوس 7 PB2/XCK — General-purpose input/output pin PB2 and external clock input
دبوس 8 PB1/MISO — General-purpose input/output pin PB1 and programming data output

التطبيقات النموذجية

ATTINY11-6PC مناسب لـ 6 التطبيقs: Simple Pushbutton and Indicator Control, Compact Relay and Sequencer, Battery-Powered Sensor Interface, Educational Microcontroller Trainer, Small Appliance Control Module, Standalone Timer and Warning Module.

🔧

Simple Pushbutton and Indicator Control

The ATTINY11-6PC fits compact human-interface controllers because it provides six I/O lines, a 6 MHz internal oscillator, and 1 KB of Flash program memory. A typical circuit reads debounced pushbuttons on selected I/O pins and drives LEDs, buzzers, or status indicators through transistor or driver stages where required. The internal oscillator eliminates a crystal in a basic design, while the watchdog timer can restart the controller if an input-scanning loop becomes stuck. Keep the program within the 1 KB memory limit and place input protection close to the connector when long external wires are present.

⚡

Compact Relay and Sequencer

A relay or sequencer application benefits from the ATTINY11-6PC's internal 6 MHz clock, timer/counter, and programmable watchdog timer. The firmware can implement timed switching sequences, debounced inputs, and fault recovery without an external clock source. Because the controller operates from 4 V to 5.5 V, it pairs naturally with regulated 5 V control logic, but relay coils should use a separate driver and flyback protection rather than loading an I/O pin directly. The 1 KB Flash limit favors a narrowly defined sequence.

🧩

Battery-Powered Sensor Interface

The ATTINY11-6PC can serve as a low-power sensor interface when the task only requires a few digital inputs, compact firmware, and intermittent processing. Its Idle mode and second software-selectable power-saving mode can reduce activity between measurements, while the internal oscillator avoids continuous crystal-driving overhead. The design must account for the 1 KB program-memory limit and use the watchdog intentionally during long waits. Analog sensor conditioning and precision measurements are better handled outside this simple digital controller.

🖥️

Educational Microcontroller Trainer

The ATTINY11-6PC is well suited to breadboard-based electronics education because its 8-pin PDIP package is easy to install and its 1 KB Flash memory provides a constrained environment for learning basic embedded programming. Students can exercise digital I/O, timer interrupts, watchdog behavior, and low-power modes without paying for a large development platform. The 4 V to 5.5 V operating range simplifies integration with common laboratory 5 V supplies. Instruction should emphasize datasheet-based pin assignment and include a documented programming interface.

🏭

Small Appliance Control Module

The ATTINY11-6PC can manage a small appliance control board when the required functions are limited to a few switches, indicators, timing functions, and simple interlocks. Its 6 MHz execution speed is adequate for deterministic control loops, and the watchdog timer adds a recovery path for firmware stalls. The 8-pin PDIP format simplifies through-hole servicing, but designers must confirm that the older controller still satisfies all functional-safety, EMC, and lifecycle requirements for the appliance. More elaborate appliances should use a larger ATtiny model.

🔔

Standalone Timer and Warning Module

The ATTINY11-6PC can implement a standalone timer or warning module using its 8-bit timer/counter, interrupt support, and programmable watchdog timer. A 6 MHz internal clock simplifies deployment, while the 4 V to 5.5 V supply range fits regulated 5 V systems. Firmware can count timing events, activate an audible or visual indicator, and reset safely after an abnormal state. The 1 KB memory ceiling makes focused timing logic preferable to elaborate user-interface code.

ملخص المنتجات الموصى بها

ATTINY13-20PU ATtiny family controller with more memory and EEPROM for expanded interface logic يُستخدم في: Simple Pushbutton and Indicator Control, Compact Relay and Sequencer, Battery-Powered Sensor Interface, Educational Microcontroller Trainer, Small Appliance Control Module, Standalone Timer and Warning Module ATTINY2313A-PU ATtiny family controller for more complex I/O and communication handling يُستخدم في: Simple Pushbutton and Indicator Control, Battery-Powered Sensor Interface, Educational Microcontroller Trainer, Small Appliance Control Module
What are the key specifications of ATTINY11-6PC that engineers should know?
The ATTINY11-6PC is an 8-bit AVR RISC microcontroller operating at up to 6 MHz with 1 KB of Flash memory, 32 working registers, and six I/O lines. According to the Microchip ATtiny11/ATtiny12 summary datasheet, it includes an 8-bit timer/counter, internal and external interrupts, a programmable watchdog timer, and two software-selectable power-saving modes. The device operates from 4 V to 5.5 V and is packaged in an 8-pin PDIP.
Where can I download the ATTINY11-6PC datasheet PDF?
The official Microchip ATtiny11/ATtiny12 summary datasheet is available at https://ww1.microchip.com/downloads/en/DeviceDoc/1006S.pdf. It describes the AVR RISC core, 1 KB Flash memory, 32 working registers, timer/counter, watchdog timer, interrupts, power-saving modes, electrical characteristics, and package information. Use the pin-description table and device overview in that document when assigning PCB signals or designing the programming interface.
Where can I find the ATTINY11-6PC pinout?
The ATTINY11-6PC pin assignment is documented in the pin-description and package drawings in the Microchip ATtiny11/ATtiny12 summary datasheet. The device uses an 8-pin PDIP package with six I/O lines and dedicated power, ground, reset, and programming-related functions. Before laying out a board, verify every net against the datasheet pin table rather than relying only on a generic DIP drawing, because I/O, reset, and programming functions are assigned to specific pins.
How do I program an ATTINY11-6PC?
The ATTINY11-6PC is programmed through its dedicated programming interface using the AVR programming toolchain and a compatible programmer. The exact signal names and electrical requirements are listed in the Microchip ATtiny11/ATtiny12 summary datasheet. Keep the controller clocked, power the device within its 4 V to 5.5 V operating range, and follow the recommended ISP connection and timing requirements during programming and production programming.
What is ATTINY11-6PC used for?
The ATTINY11-6PC is used for compact embedded-control tasks such as pushbutton inputs, LED indication, simple sequencing, relay control, and low-cost timer functions. Its 1 KB Flash memory and six I/O lines are sufficient for small standalone programs, while the watchdog timer supports automatic recovery from a stalled firmware loop. The internal 6 MHz oscillator also reduces the number of external clock components required on a board.
Is ATTINY11-6PC suitable for a 5 V industrial control board?
The ATTINY11-6PC is electrically suitable for a regulated 5 V board because its listed operating supply range is 4 V to 5.5 V. The operating-temperature range is -40 °C to 85 °C, making it appropriate for many industrial ambient conditions. Verify the complete electrical limits, watchdog behavior, I/O drive capability, and system fault requirements in the manufacturer datasheet before approving it for safety-related or high-reliability control.
What is the difference between ATTINY11-6PC and ATTINY11-6SU?
The principal documented difference is package and mounting technology: ATTINY11-6PC is an 8-pin PDIP through-hole device, while ATTINY11-6SU is an 8-pin surface-mount SOIC device. Although their core speed, memory class, and supply range may be closely related, they are not PCB drop-in equivalents because their land patterns differ. A board designed for ATTINY11-6PC requires its package pins and hole pattern rather than the ATTINY11-6SU footprint.
When should I choose ATTINY11-6PC over ATTINY13-20PU?
Choose ATTINY11-6PC when a compact 6 MHz AVR controller, 1 KB Flash memory, six I/O lines, and an 8-pin PDIP package are sufficient and cost or board simplicity is the priority. Choose ATTINY13-20PU when the design needs its listed 20 MHz speed, 64-byte EEPROM, and broader peripheral capability. The higher-performance device is more appropriate for denser firmware or more demanding timing, while the ATTINY11-6PC is better matched to simple control functions.
Is ATTINY11-6PC suitable for a low-power embedded product?
The ATTINY11-6PC can suit a low-power embedded product because it provides an internal oscillator, a watchdog timer, Idle mode, and a second software-selectable power-saving mode. Its 1 KB program-memory limit requires careful firmware sizing, however, and a duty-cycled design should disable unused peripherals and I/O lines where practical. Actual current consumption depends on operating voltage, clock activity, and the selected firmware mode, so measure the complete product operating profile.
What can replace ATTINY11-6PC on an existing PCB?
A true PCB replacement for ATTINY11-6PC must use the same 8-pin PDIP footprint, match the 4 V to 5.5 V supply range, provide compatible I/O and programming signals, and meet the application's timing and watchdog requirements. The available cross-reference results identify related ATtiny devices but do not document a distinct 8-pin PDIP part with verified pin-to-pin and parametric equivalence. Treat any proposed substitute as a redesign candidate until its complete datasheet and PCB land pattern have been checked.
What is the best Microchip equivalent for ATTINY11-6PC?
No distinct Microchip part is documented here as a verified drop-in equivalent for the ATTINY11-6PC in the 8-pin PDIP package. Related ATtiny11 and ATtiny13 devices can provide similar functionality, but package, clock speed, memory, and peripheral differences may require firmware or board changes. Use the Request a Quote form on this page for sourcing support, and request engineering review of any proposed equivalent rather than treating a similar specification as proof of drop-in compatibility.
Where can I buy ATTINY11-6PC online?
Use the Request a Quote form on this page to request ATTINY11-6PC availability, current lead time, and the required shipping format. Because this product is a legacy through-hole microcontroller, confirm the 8-pin PDIP package, operating-temperature grade, and desired order quantity when requesting the quote. The manufacturer summary datasheet is available directly through the product page for technical review.
What is the price of ATTINY11-6PC?
Use the Request a Quote form on this page for the current ATTINY11-6PC quotation and quantity-break availability. The product page does not publish a static price because legacy-microcontroller pricing can vary with order quantity, packaging, and supply status. Include your required quantity and whether the order must use tubes or another approved shipping format in the request.
What is the lead time for ATTINY11-6PC?
Request the current ATTINY11-6PC lead time through the Request a Quote form on this page. Lead time can vary with the ordered quantity, package shipment format, and current component availability. For production planning, also state the required delivery date and annual demand so sourcing can confirm whether a single procurement event or a supply schedule is appropriate.
Is ATTINY11-6PC in stock?
Current ATTINY11-6PC stock status should be confirmed through the Request a Quote form on this page. The component is an older 8-pin PDIP AVR device, so availability may fluctuate by quantity and shipment format. Request the exact MPN, required package, and target quantity, and specify whether any date-specific allocation is needed for your production schedule.
How does the ATTINY11-6PC watchdog timer support reliable operation?
The ATTINY11-6PC includes a programmable watchdog timer with an internal oscillator, allowing the controller to recover from a stalled main program. According to the Microchip ATtiny11/ATtiny12 summary datasheet, the timer is one of the device's core resources alongside the 8-bit timer/counter and interrupt functions. Firmware should service the watchdog during normal execution and use the reset behavior to recover from unexpected software faults.
Does ATTINY11-6PC need an external crystal?
The ATTINY11-6PC includes an internal oscillator and is specified to operate at up to 6 MHz, so the standard operating arrangement does not require an external crystal for clock generation. The internal oscillator simplifies PCB layout and reduces component count. If a design requires deterministic timing or a different clock arrangement, consult the complete datasheet and application guidance before introducing an external clock source.

بيانات مرجعية هندسية لـ ATTINY11-6PC — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ATTINY11-6PC for compact, simple 5 V control systems that need no more than 1 KB of Flash, six I/O lines, and a through-hole 8-pin PDIP package. It is particularly suitable for prototypes, small sequencers, basic input modules, and timer functions where an internal oscillator and watchdog timer are valuable. Choose ATTINY11-6SU only when the PCB is specifically designed for its surface-mount SOIC footprint; it is not a direct replacement for the PDIP board. Consider ATTINY13-20PU when the firmware, EEPROM, or faster execution exceeds ATTINY11 limits. Because no distinct 8-pin PDIP substitute with verified pin-to-pin equivalence was identified, changing manufacturers or product families requires a hardware and firmware review rather than a simple purchasing substitution.

المقارنة مع البدائل

المعامل هذا المنتج
Package 8-pin PDIP
Brand Microchip Technology
CPU Architecture 8-bit AVR RISC
Maximum CPU Frequency 6 MHz
Flash Program Memory 1 KB
General-Purpose Working Registers 32 registers
Operating Supply Voltage 4 V to 5.5 V
I/O Lines 6 lines
Watchdog Timer Yes
Mounting Type Through-hole

أبرز الفروقات

  • Compact 8-pin PDIP implementation (مقابلATTINY11-6SU)
  • Higher clock speed than the identified ATtiny11L option (مقابلATTINY11L-2SI)
  • Broader timing and storage capability than the ATtiny13 alternative (مقابلATTINY13-20PU)

ملاحظات التصميم

Route the ATTINY11-6PC power and ground connections directly to the supply planes, and place the required bypass capacitor immediately between the VCC and GND pins. Keep programming, reset, and clock-sensitive traces away from noisy switching nodes. Because this is an 8-pin PDIP device, verify the physical hole pattern, pin-1 orientation, and keep-out area against the package drawing rather than relying on a generic DIP footprint.

Operate the controller only within its specified 4 V to 5.5 V supply range and design the 5 V rail to remain within that range under load and transient conditions. External indicators, relays, and motors should use separate driver circuitry so their current does not flow through the microcontroller pins. This is especially important because the component has limited I/O resources and no specified high-current output capability in its listed feature summary.

Do not assume that related ATtiny11 or ATtiny13 devices are drop-in replacements. ATTINY11-6SU uses a surface-mount SOIC package rather than the ATTINY11-6PC's PDIP footprint, while ATTINY13-20PU changes available memory, timing, and peripheral resources. Confirm the PCB land pattern, pin functions, programming interface, supply limits, and firmware assumptions before approving any substitute for an existing design.

Use the watchdog timer as part of the control strategy rather than enabling it without servicing it. A periodic service routine can detect a stalled task and allow the controller to reset, but long blocking delays must either service the watchdog or be designed around it. Pair watchdog recovery with a defined startup state for outputs so that a reset does not leave relays, indicators, or other actuators in an unsafe condition.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance attributes were not explicitly established by the manufacturer summary or product snippets. The operating temperature range is listed as -40 °C to 85 °C.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

attiny11 datasheet attiny11 programming attiny11 pinout ATTINY11-6PC datasheet ATTINY11-6PC pinout ATTINY11-6PC programming ATTINY11-6PC equivalent ATTINY11-6PC replacement ATTINY11-6PC vs ATTINY13-20PU ATTINY11-6PC 8-PDIP footprint Microchip ATTINY11-6PC ATTINY11-6PC price ATTINY11-6PC stock

المكونات والمصطلحات ذات الصلة

Microchip Technology ATTINY11-6PC ATTINY11 ATTINY11-6SU ATTINY11L-2SI ATTINY13-20PU ATTINY2313A-PU 8-bit microcontroller AVR RISC architecture embedded controller programmable semiconductor IC 1 KB Flash memory 6 MHz clock watchdog timer 8-bit timer/counter power-saving modes Idle mode internal oscillator 8-pin PDIP PDIP package through-hole assembly surface mount SMD 4 V to 5.5 V supply Microchip Technology ATtiny11/ATtiny12 summary datasheet
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر