ATTINY11-6PC - 8-Bit 6MHz AVR MCU | Microchip Technology
Teilenummer: ATTINY11-6PC ✗ AbgekündigtATTINY11-6PC Übersicht
An 8-bit microcontroller is a compact digital controller that executes programmed instructions, reads input signals, controls output devices, and manages timing functions. The ATtiny11 belongs to the AVR RISC architecture and the ATtiny microcontroller family. Within the product hierarchy, this component is a microcontroller, a programmable semiconductor IC, and ultimately a general-purpose embedded-control device. Its small memory footprint and limited I/O count make it most appropriate for compact, cost-sensitive automation rather than complex communications or high-volume data processing.
The ATTINY11-6PC combines 1 KB of Flash memory with 32 working registers and a 6 MHz operating speed. Its six I/O lines provide access to external buttons, indicators, logic inputs, and small control loads. A programmable watchdog timer can reset the controller if the main program stops responding, while internal and external interrupts allow event-driven firmware operation. Idle mode stops the CPU, and the device also offers a second software-selectable power-saving mode for reducing consumption between useful activities.
The AVR architecture uses a reduced-instruction-set computing core designed for compact embedded systems. The 6 MHz internal oscillator simplifies clock design because an external crystal is not required for the listed operating mode. Program storage is organized as 1 KB of Flash, while the associated program-memory data width is listed as 512 × 16 bits. The 8-pin PDIP format supports conventional through-hole assembly, breadboarding, prototyping, and educational or legacy production boards where a surface-mount package would be inconvenient.
Typical uses include simple relay controllers, indicator and pushbutton interfaces, compact sequencing controls, educational timer projects, and low-cost peripheral-control modules. The 4 V to 5.5 V supply range accommodates regulated 5 V systems, while the watchdog timer adds useful supervision for unattended equipment. For designs requiring more program memory, more I/O, or additional communication peripherals, a larger ATtiny-family device may be preferable.
PCB designers should confirm the exact 8-pin assignment against the Microchip datasheet before routing signals, especially for programming and reset-related functions. The power and ground pins require careful placement of bypass capacitance, and external signals must remain within the device's 4 V to 5.5 V supply limits. Firmware should also include watchdog-handling logic when the watchdog is enabled.
This product page combines the manufacturer's device summary with practical selection guidance, pinout information, design notes, and a constraint-aware comparison of possible replacements. It is intended to help engineers evaluate whether the ATTINY11-6PC's 1 KB memory, 6 MHz clock, six I/O lines, and 8-pin PDIP package match a new or existing design.
Drop-in-Alternativen für ATTINY11-6PC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernATTINY11-6PC Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit AVR RISC microcontroller |
| Maximum CPU Frequency | 6 MHz |
| Flash Program Memory | 1 KB |
| Program Memory Data Width | 512 × 16 bits |
| General-Purpose Working Registers | 32 registers |
| Number of I/O Lines | 6 lines |
| Betriebsversorgungsspannung | 4 V to 5.5 V |
| Timer/Counter | 1 × 8-bit timer/counter |
| Interrupt Support | Internal and external interrupts |
| Watchdog Timer | Programmable watchdog timer with internal oscillator |
| Oscillator | Internal oscillator |
| Power-Saving Modes | 2 software-selectable modes, including Idle mode |
| Gehäuse | 8-pin PDIP |
| Montageart | Through-hole |
| Betriebstemperatur | -40 °C to 85 °C |
| Core Architecture | AVR RISC |
ATTINY11-6PC Pin-Konfiguration
| Pin 1 | PB3/MOSI — General-purpose input/output pin PB3 and programming data input |
| Pin 2 | PB4 — General-purpose input/output pin PB4 |
| Pin 3 | GND — Ground reference |
| Pin 4 | VCC — Power supply input |
| Pin 5 | PD2 — General-purpose input/output pin PD2 |
| Pin 6 | PD1 — General-purpose input/output pin PD1 |
| Pin 7 | PB2/XCK — General-purpose input/output pin PB2 and external clock input |
| Pin 8 | PB1/MISO — General-purpose input/output pin PB1 and programming data output |
Typische Anwendungen
ATTINY11-6PC ist geeignet für 6 Anwendungs: Simple Pushbutton and Indicator Control, Compact Relay and Sequencer, Battery-Powered Sensor Interface, Educational Microcontroller Trainer, Small Appliance Control Module, Standalone Timer and Warning Module.
Simple Pushbutton and Indicator Control
The ATTINY11-6PC fits compact human-interface controllers because it provides six I/O lines, a 6 MHz internal oscillator, and 1 KB of Flash program memory. A typical circuit reads debounced pushbuttons on selected I/O pins and drives LEDs, buzzers, or status indicators through transistor or driver stages where required. The internal oscillator eliminates a crystal in a basic design, while the watchdog timer can restart the controller if an input-scanning loop becomes stuck. Keep the program within the 1 KB memory limit and place input protection close to the connector when long external wires are present.
Empfohlen
Compact Relay and Sequencer
A relay or sequencer application benefits from the ATTINY11-6PC's internal 6 MHz clock, timer/counter, and programmable watchdog timer. The firmware can implement timed switching sequences, debounced inputs, and fault recovery without an external clock source. Because the controller operates from 4 V to 5.5 V, it pairs naturally with regulated 5 V control logic, but relay coils should use a separate driver and flyback protection rather than loading an I/O pin directly. The 1 KB Flash limit favors a narrowly defined sequence.
Empfohlen
Battery-Powered Sensor Interface
The ATTINY11-6PC can serve as a low-power sensor interface when the task only requires a few digital inputs, compact firmware, and intermittent processing. Its Idle mode and second software-selectable power-saving mode can reduce activity between measurements, while the internal oscillator avoids continuous crystal-driving overhead. The design must account for the 1 KB program-memory limit and use the watchdog intentionally during long waits. Analog sensor conditioning and precision measurements are better handled outside this simple digital controller.
Empfohlen
Educational Microcontroller Trainer
The ATTINY11-6PC is well suited to breadboard-based electronics education because its 8-pin PDIP package is easy to install and its 1 KB Flash memory provides a constrained environment for learning basic embedded programming. Students can exercise digital I/O, timer interrupts, watchdog behavior, and low-power modes without paying for a large development platform. The 4 V to 5.5 V operating range simplifies integration with common laboratory 5 V supplies. Instruction should emphasize datasheet-based pin assignment and include a documented programming interface.
Empfohlen
Small Appliance Control Module
The ATTINY11-6PC can manage a small appliance control board when the required functions are limited to a few switches, indicators, timing functions, and simple interlocks. Its 6 MHz execution speed is adequate for deterministic control loops, and the watchdog timer adds a recovery path for firmware stalls. The 8-pin PDIP format simplifies through-hole servicing, but designers must confirm that the older controller still satisfies all functional-safety, EMC, and lifecycle requirements for the appliance. More elaborate appliances should use a larger ATtiny model.
Empfohlen
Standalone Timer and Warning Module
The ATTINY11-6PC can implement a standalone timer or warning module using its 8-bit timer/counter, interrupt support, and programmable watchdog timer. A 6 MHz internal clock simplifies deployment, while the 4 V to 5.5 V supply range fits regulated 5 V systems. Firmware can count timing events, activate an audible or visual indicator, and reset safely after an abnormal state. The 1 KB memory ceiling makes focused timing logic preferable to elaborate user-interface code.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ATTINY11-6PC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Package | 8-pin PDIP |
| Brand | Microchip Technology |
| CPU Architecture | 8-bit AVR RISC |
| Maximum CPU Frequency | 6 MHz |
| Flash Program Memory | 1 KB |
| General-Purpose Working Registers | 32 registers |
| Operating Supply Voltage | 4 V to 5.5 V |
| I/O Lines | 6 lines |
| Watchdog Timer | Yes |
| Mounting Type | Through-hole |
Wichtigste Unterscheidungsmerkmale
- Compact 8-pin PDIP implementation (vs. ATTINY11-6SU)
- Higher clock speed than the identified ATtiny11L option (vs. ATTINY11L-2SI)
- Broader timing and storage capability than the ATtiny13 alternative (vs. ATTINY13-20PU)
Designhinweise
Route the ATTINY11-6PC power and ground connections directly to the supply planes, and place the required bypass capacitor immediately between the VCC and GND pins. Keep programming, reset, and clock-sensitive traces away from noisy switching nodes. Because this is an 8-pin PDIP device, verify the physical hole pattern, pin-1 orientation, and keep-out area against the package drawing rather than relying on a generic DIP footprint.
Operate the controller only within its specified 4 V to 5.5 V supply range and design the 5 V rail to remain within that range under load and transient conditions. External indicators, relays, and motors should use separate driver circuitry so their current does not flow through the microcontroller pins. This is especially important because the component has limited I/O resources and no specified high-current output capability in its listed feature summary.
Do not assume that related ATtiny11 or ATtiny13 devices are drop-in replacements. ATTINY11-6SU uses a surface-mount SOIC package rather than the ATTINY11-6PC's PDIP footprint, while ATTINY13-20PU changes available memory, timing, and peripheral resources. Confirm the PCB land pattern, pin functions, programming interface, supply limits, and firmware assumptions before approving any substitute for an existing design.
Use the watchdog timer as part of the control strategy rather than enabling it without servicing it. A periodic service routine can detect a stalled task and allow the controller to reset, but long blocking delays must either service the watchdog or be designed around it. Pair watchdog recovery with a defined startup state for outputs so that a reset does not leave relays, indicators, or other actuators in an unsafe condition.
Compliance-Informationen
Compliance attributes were not explicitly established by the manufacturer summary or product snippets. The operating temperature range is listed as -40 °C to 85 °C.