Microchip Technology

ATTINY427-MF - 20MHz 4KB AVR Microcontroller | Microchip

MPN: ATTINY427-MF ✓ نشط
24-pin VQFN, 4 x 4 mm Package 20 MHz Speed 4 KB Memory
الحد الأدنى للطلب: 1 |

ATTINY427-MF نظرة عامة

Microchip Technology ATTINY427-MF is an 8-bit tinyAVR 2 microcontroller with a 20 MHz AVR CPU, 4 KB Flash memory, 512 B SRAM, and 128 B EEPROM in a 24-pin VQFN package measuring 4 x 4 mm. The device combines an AVR CPU with a hardware multiplier and Microchip's Core Independent Peripherals architecture for compact embedded-control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one package. The ATTINY427 belongs to the tinyAVR 2 family, where tinyAVR denotes low-power 8-bit AVR devices and Core Independent Peripherals describe hardware functions that can perform tasks without continuous CPU intervention. This combination supports responsive control in compact industrial, consumer, and connected products.

The ATTINY427 provides 4 KB of Flash for program storage, 512 B of SRAM for working data, and 128 B of EEPROM for nonvolatile parameter retention. Its AVR CPU runs at up to 20 MHz and includes a hardware multiplier, supporting efficient 8-bit control calculations. The 24-pin VQFN offers a compact 4 x 4 mm footprint for space-constrained boards while providing the interface options expected from the tinyAVR 2 family.

According to the Microchip ATtiny424/426/427/824/826/827 data sheet, the family uses a flexible, low-power architecture that includes Event Control, permitting peripherals to communicate directly with each other and reducing the processing burden on the CPU. This architecture is particularly useful for routine control loops where timer, communication, and interface events must be handled predictably without excessive polling.

Typical applications include compact sensor controllers, building and industrial automation modules, appliance control boards, battery-powered accessories, LED lighting controllers, and low-cost communication nodes. The small package and mixed analog and digital control resources make the ATTINY427 suitable for designs that need more flexibility than a fixed-function logic device but less overhead than a larger general-purpose microcontroller.

When laying out a board, follow the pin-description table and recommended land pattern in the manufacturer data sheet for the 24-pin VQFN package. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and verify programming, clock, reset, and peripheral connections before releasing the PCB layout for production.

This product record combines the manufacturer specifications with package information, design guidance, source links, and a direct comparison framework. It is intended to help engineers determine whether the ATTINY427's memory capacity, 20 MHz execution rate, and compact VQFN footprint satisfy an embedded-control requirement without paying for a larger microcontroller platform.

بدائل مباشرة لـ ATTINY427-MF — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع ATTINY427-MF (نفس عامل الشكل والبصمة) — يختلف في EEPROM, Package, Product Type, SRAM.

Microchip Technology
EEPROM: 128 bytes
Package: 24-pin VQFN (4 x 4 mm)
Product Type: 8-bit Microcontroller (MCU)
قارن مع ATTINY427-MF →

ATTINY827-MF

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 24-pin VQFN (4 x 4 mm)
8-bit Microcontroller (MCU) · tinyAVR 2 · AVR with hardware multiplier · 8-bit RISC · 20 MHz · 8 KB · 1 KB · 128 bytes

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ATTINY427-MF الحدود القصوى والخصائص الكهربائية

Product Type 8-bit AVR tinyAVR 2 microcontroller
Maximum CPU Frequency 20 MHz
Flash Memory 4 KB
Program Memory Organization 4K x 8
SRAM 512 B
EEPROM 128 B
CPU Core AVR with hardware multiplier
Architecture Core Independent Peripherals
العلبة 24-pin VQFN, 4 x 4 mm
نوع التركيب Surface mount
درجة حرارة التشغيل -40C to +125C
حالة RoHS unknown
REACH Status unknown

دليل تكوين أطراف ATTINY427-MF 24-pin vqfn, 4 x 4 mm

تكوين الأطراف لـ ATTINY427-MF (حزمة 24-pin vqfn, 4 x 4 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 24-pin vqfn, 4 x 4 mm لـ ATTINY427-MF

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATTINY427-MF.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ATTINY427-MF مناسب لـ 6 التطبيقs: Industrial Sensor and Actuator Controller, Smart Home Sensor Node, LED Lighting Controller, Battery-Powered Accessory Controller, Building Automation Module, Compact Communication Interface Node.

🏭

Industrial Sensor and Actuator Controller

The ATTINY427-MF fits compact sensor-hub and actuator-control designs because its 20 MHz AVR CPU, hardware multiplier, and Core Independent Peripherals architecture can handle real-time control tasks without a larger processor. The 4 KB Flash accommodates a focused firmware image, while 512 B of SRAM and 128 B of EEPROM provide space for working state and retained configuration. Place the device between sensor conditioning and actuator drive circuits, keep analog inputs away from switching nodes, and validate timing at the system’s worst-case operating conditions.

🧩

Smart Home Sensor Node

The ATTINY427-MF is appropriate for a low-power smart-home sensor node that combines local sensing, configuration storage, and simple actuator logic. Its 4 KB Flash supports compact application firmware, and the 128 B EEPROM can retain calibration or network configuration across power cycles. Use the 20 MHz operating capability for responsive peripheral coordination, then disable unused functions and choose the lowest acceptable clock setting where average power consumption is the priority.

💡

LED Lighting Controller

The ATTINY427-MF can control addressable or multi-channel LED lighting systems where deterministic timing and compact routing matter. Its 20 MHz AVR CPU is suitable for updating output states and coordinating timer-driven effects, while Core Independent Peripherals can reduce CPU involvement in peripheral events. Keep high-current LED drive stages separate from the microcontroller, provide local supply decoupling, and route switching currents away from the device ground and analog inputs to reduce noise coupling.

📱

Battery-Powered Accessory Controller

The ATTINY427-MF suits compact battery-powered accessories that need local control, nonvolatile settings, and low peripheral overhead. Its 4 KB Flash is sufficient for focused firmware, and its EEPROM can preserve user configuration without consuming RAM. Review clock, unused-peripheral, and sleep-mode settings during power-budget calculations, and validate average current against the accessory’s battery target rather than relying only on the maximum CPU frequency.

🏠

Building Automation Module

The ATTINY427-MF can serve as the local controller in a compact building-automation module that monitors inputs and manages relays, indicators, or communication interfaces. The 20 MHz processor and Core Independent Peripherals architecture support responsive event-driven control, while 512 B of SRAM and 128 B of EEPROM are useful for operating state and configuration. Separate field-side switching energy from sensitive logic, provide robust input conditioning, and verify timing behavior across the full product temperature range.

🌐

Compact Communication Interface Node

The ATTINY427-MF is suitable for a compact protocol or communication interface node when the application needs an 8-bit controller rather than a high-performance system processor. Its AVR CPU with hardware multiplier can manage framing, state handling, and peripheral events, while the tinyAVR 2 event architecture reduces polling overhead. Match the selected communication peripheral and I/O requirements to the pin-description table, keep the data interface away from switching regulators, and test timing margin with realistic bus loading.

ملخص المنتجات الموصى بها

ATtiny424-MF tinyAVR 2 family control companion يُستخدم في: Industrial Sensor and Actuator Controller, LED Lighting Controller, Battery-Powered Accessory Controller ATtiny827-MF Higher-memory tinyAVR 2 alternative يُستخدم في: Industrial Sensor and Actuator Controller, Smart Home Sensor Node, Building Automation Module, Compact Communication Interface Node ATtiny426-MF tinyAVR 2 family sensor-control companion يُستخدم في: Smart Home Sensor Node, Building Automation Module ATtiny826-MF Related tinyAVR 2 control device يُستخدم في: LED Lighting Controller, Battery-Powered Accessory Controller ATtiny824-MF tinyAVR 2 family interface controller يُستخدم في: Compact Communication Interface Node
What is the operating frequency of ATTINY427-MF?
The ATTINY427-MF operates at up to 20 MHz using its AVR CPU with a hardware multiplier. According to the Microchip ATtiny424/426/427/824/826/827 data sheet, this frequency supports efficient 8-bit control calculations in compact embedded systems. The device also provides 4 KB of Flash, 512 B of SRAM, and 128 B of EEPROM, making it suitable for routines that combine real-time control with modest data storage requirements.
How much memory does ATTINY427-MF have?
The ATTINY427-MF includes 4 KB of Flash, 512 B of SRAM, and 128 B of EEPROM. The Microchip manufacturer data sheet describes the Flash as 4K x 8 program memory and identifies the device as an 8-bit tinyAVR 2 microcontroller. Flash stores the firmware, SRAM holds working variables and stack data, while EEPROM preserves configuration values when the device is powered down.
What package does ATTINY427-MF use?
The ATTINY427-MF is supplied in a 24-pin VQFN package measuring 4 x 4 mm. The manufacturer product page identifies the package as a 24-pin VQFN, and the Microchip data sheet covers the 24-pin member of the tinyAVR 2 family. Use the package drawing and recommended footprint from the manufacturer data sheet when defining the PCB land pattern.
Where can I download the ATTINY427-MF datasheet PDF?
The ATTINY427-MF datasheet PDF can be downloaded from the official Microchip document link on this page. The document is titled ATtiny424/426/427/824/826/827 Data Sheet and contains the family-level electrical characteristics, package information, memory map, and peripheral descriptions. Because ATTINY427 is one member of that documented family, use the ATtiny427-specific sections and ordering information when evaluating the -MF variant.
Where is the ATTINY427 pinout located?
The ATTINY427 pinout is located in the pin-description and package-drawing sections of the official Microchip ATtiny424/426/427/824/826/827 data sheet. Use the 24-pin VQFN column and the ATtiny427 column when assigning pins to power, ground, reset, programming, clock, and peripheral functions. Verify every board trace against that table because multifunction pins can change behavior according to the selected peripheral.
What can replace ATTINY427-MF?
The ATtiny827-MF is the closest same-package member that can serve as a drop-in upgrade when its additional memory is acceptable. It uses a 24-pin VQFN and retains the tinyAVR 2 family architecture while increasing Flash and SRAM capacity. Firmware must still be checked for memory-map and peripheral differences, and production qualification should confirm timing, supply voltage, and package compatibility.
Is ATTINY427-MF suitable for industrial control applications?
The ATTINY427-MF is suitable for compact industrial-control designs that require real-time response, modest firmware storage, and deterministic peripheral handling. Its 20 MHz AVR CPU, Core Independent Peripherals architecture, 512 B SRAM, and 128 B EEPROM support compact sensor, actuator, and equipment-control designs. For installations with severe electrical noise or extended qualification requirements, validate the complete assembly against the applicable environmental and reliability requirements.
When should I choose ATTINY427-MF over ATtiny827-MF?
Choose ATTINY427-MF when 4 KB of Flash, 512 B of SRAM, and 128 B of EEPROM are sufficient and minimizing resource allocation is important. Choose ATtiny827-MF when firmware growth, larger working buffers, or more nonvolatile configuration data justify the increased memory. Both use the same family architecture and 24-pin VQFN format, but software requirements should determine the correct device rather than package availability alone.
Is ATTINY427-MF the same as ATtiny827-MF?
No. The ATTINY427-MF and ATtiny827-MF are related tinyAVR 2 devices, but they have different memory capacities. The ATTINY427 provides 4 KB of Flash and 512 B of SRAM, whereas the ATtiny827 provides 8 KB of Flash and 1 KB of SRAM. Their common 24-pin VQFN construction enables PCB reuse, while the increased memory makes ATtiny827 a functional drop-in upgrade rather than an electrically identical part.
Where can I buy ATTINY427-MF online?
Use the Request a Quote form on this page to request ATTINY427-MF availability, unit pricing, minimum order quantity, and current lead time. The form is the direct route for a procurement response tied to the exact -MF ordering code. Confirm the requested package, quantity, and delivery destination with the supplier before placing a production order.
What is the price of ATTINY427-MF?
Request the current ATTINY427-MF price through the Request a Quote form on this page. A quote response should identify the quantity, exact -MF suffix, package, currency, and applicable order breaks for the requested shipment. Pricing is quote-driven and can change with quantity, market conditions, and delivery requirements, so use the returned quote for purchasing decisions.
What is the lead time for ATTINY427-MF?
The current lead time for ATTINY427-MF should be requested through the Request a Quote form on this page. Include your required quantity, shipment date, and destination so the quote can reflect an actionable schedule. For production planning, also request confirmation of the exact -MF package and any authorized-channel lead time associated with that ordering code.
Is ATTINY427-MF in stock?
Request ATTINY427-MF stock status through the Request a Quote form on this page. The response should state the quantity currently available for the exact ATTINY427-MF ordering code and any lead time needed to cover additional demand. Do not base a build schedule on general family inventory because package, temperature grade, and packing code can affect allocation.
What are the key specifications of ATTINY427-MF that engineers should know?
The ATTINY427-MF combines a 20 MHz AVR CPU with a hardware multiplier, 4 KB of Flash, 512 B of SRAM, and 128 B of EEPROM in a 24-pin 4 x 4 mm VQFN package. The Microchip manufacturer data sheet also identifies the family's Core Independent Peripherals architecture and low-power design. These figures define its suitability for compact real-time controllers with modest firmware and data-storage requirements.
What is the best Microchip equivalent for ATTINY427-MF?
The ATtiny827-MF is the best same-family drop-in upgrade identified for the ATTINY427-MF because it uses the same 24-pin VQFN format and retains the tinyAVR 2 architecture. Its principal difference is memory: 8 KB of Flash and 1 KB of SRAM instead of 4 KB and 512 B, respectively. Review the memory map, peripheral behavior, clock configuration, and application requirements before converting the design.

بيانات مرجعية هندسية لـ ATTINY427-MF — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose ATTINY427-MF for compact 8-bit control designs whose firmware fits within 4 KB of Flash and whose working data fits within 512 B of SRAM. Its 20 MHz AVR CPU, hardware multiplier, Core Independent Peripherals architecture, and 24-pin 4 x 4 mm VQFN package make it appropriate for sensor nodes, automation modules, lighting controllers, and compact accessories. Choose ATtiny827-MF when firmware or working-memory growth is expected: it retains the same family architecture and 24-pin VQFN format while doubling Flash to 8 KB and SRAM to 1 KB. The larger device does not remove the need for application review, because firmware assumptions, linked addresses, and timing behavior must still be checked. For either selection, validate the electrical limits, pin multiplexing, package footprint, and environmental requirements against the manufacturer data sheet before production release.

المقارنة مع البدائل

المعامل هذا المنتج ATtiny827-MF
Brand Microchip Technology Microchip Technology
Package 24-pin VQFN (4 x 4 mm) 24-pin VQFN (4 x 4 mm)
Maximum CPU Frequency 20 MHz 20 MHz
Flash Memory 4 KB 8 KB
SRAM 512 B 1 KB
EEPROM 128 B 128 B
CPU Core AVR with hardware multiplier AVR with hardware multiplier
Architecture Core Independent Peripherals Core Independent Peripherals
Program Memory Organization 4K x 8 8K x 8

أبرز الفروقات

  • Lower Flash requirement for focused control firmware (مقابلATtiny827-MF)
  • Lower SRAM requirement for compact control tasks (مقابلATtiny827-MF)
  • Shared compact package and family architecture (مقابلATtiny827-MF)

ملاحظات التصميم

Follow the manufacturer land pattern for the 24-pin VQFN and place all decoupling capacitors close to their intended supply pins. VQFN packages are difficult to inspect after assembly, so verify pad dimensions, solder-mask clearance, and paste volume against the latest Microchip package drawing before fabrication. Preserve solderable leads and thermal-via access on the exposed pad area if the package drawing specifies one.

Budget the supply voltage and operating current across active, low-frequency, and sleep operating states. The 20 MHz CPU rate is a maximum capability rather than a constant-power requirement. Use the manufacturer electrical-characteristics table to select the regulator headroom and decoupling network, and avoid tying unused I/O pins to a voltage source that could create an unintended path through protection circuitry.

Separate analog sensing paths, communication lines, and timing-sensitive outputs from relay, motor, LED, and switching-converter paths. Keep the ground return from the microcontroller local and continuous, and provide a low-impedance reference plane beneath the device. When an exposed pad is present, follow the package drawing’s connection and via recommendations rather than treating it as an unrestricted thermal or electrical region.

Do not assume that another tinyAVR 2 device is interchangeable solely because it uses a similar package. Confirm the exact pin count, exposed-pad arrangement, reset behavior, peripheral multiplexing, clock requirements, memory map, and operating voltage before using a substitute. In particular, ATtiny827-MF provides twice the Flash and SRAM of ATTINY427-MF, which is beneficial for memory growth but still requires software and timing review.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ATTINY427-MF datasheet ATTINY427-MF specifications ATTINY427-MF pinout ATTINY427-MF datasheet pdf Microchip ATTINY427-MF ATTINY427-MF 20MHz 4KB ATTINY427-MF VQFN-24 ATTINY427-MF equivalent ATTINY427-MF replacement ATTINY427-MF vs ATtiny827-MF ATTINY427-MF price ATTINY427-MF stock ATTINY427-MF application circuit AVR ATtiny427-MF pinout

المكونات والمصطلحات ذات الصلة

Microchip Technology ATTINY427-MF ATtiny427 ATtiny827-MF AVR CPU tinyAVR 2 8-bit microcontroller RISC microcontroller hardware multiplier Core Independent Peripherals Event Control Flash memory SRAM EEPROM VQFN-24 QFN family surface-mount package 4 x 4 mm package industrial automation sensor controller LED lighting controller smart-home sensor node battery-powered accessory building automation communication interface node
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر