ATTINY427-MF - 20MHz 4KB AVR Microcontroller | Microchip
Артикул: ATTINY427-MF ✓ АктивенATTINY427-MF Обзор
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one package. The ATTINY427 belongs to the tinyAVR 2 family, where tinyAVR denotes low-power 8-bit AVR devices and Core Independent Peripherals describe hardware functions that can perform tasks without continuous CPU intervention. This combination supports responsive control in compact industrial, consumer, and connected products.
The ATTINY427 provides 4 KB of Flash for program storage, 512 B of SRAM for working data, and 128 B of EEPROM for nonvolatile parameter retention. Its AVR CPU runs at up to 20 MHz and includes a hardware multiplier, supporting efficient 8-bit control calculations. The 24-pin VQFN offers a compact 4 x 4 mm footprint for space-constrained boards while providing the interface options expected from the tinyAVR 2 family.
According to the Microchip ATtiny424/426/427/824/826/827 data sheet, the family uses a flexible, low-power architecture that includes Event Control, permitting peripherals to communicate directly with each other and reducing the processing burden on the CPU. This architecture is particularly useful for routine control loops where timer, communication, and interface events must be handled predictably without excessive polling.
Typical applications include compact sensor controllers, building and industrial automation modules, appliance control boards, battery-powered accessories, LED lighting controllers, and low-cost communication nodes. The small package and mixed analog and digital control resources make the ATTINY427 suitable for designs that need more flexibility than a fixed-function logic device but less overhead than a larger general-purpose microcontroller.
When laying out a board, follow the pin-description table and recommended land pattern in the manufacturer data sheet for the 24-pin VQFN package. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and verify programming, clock, reset, and peripheral connections before releasing the PCB layout for production.
This product record combines the manufacturer specifications with package information, design guidance, source links, and a direct comparison framework. It is intended to help engineers determine whether the ATTINY427's memory capacity, 20 MHz execution rate, and compact VQFN footprint satisfy an embedded-control requirement without paying for a larger microcontroller platform.
Аналоги без доработки для ATTINY427-MF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATTINY427-MF (тот же форм-фактор и посадочное место) — отличается по EEPROM, Package, Product Type, SRAM.
ATTINY827-MF
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ATTINY427-MF Максимальные параметры и электрические характеристики
| Product Type | 8-bit AVR tinyAVR 2 microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 4 KB |
| Program Memory Organization | 4K x 8 |
| SRAM | 512 B |
| EEPROM | 128 B |
| CPU Core | AVR with hardware multiplier |
| Architecture | Core Independent Peripherals |
| Корпус | 24-pin VQFN, 4 x 4 mm |
| Тип монтажа | Surface mount |
| Рабочая температура | -40C to +125C |
| Статус RoHS | unknown |
| REACH Status | unknown |
Руководство по цоколевке ATTINY427-MF в корпусе 24-pin vqfn, 4 x 4 mm
Цоколевка для ATTINY427-MF (корпус 24-pin vqfn, 4 x 4 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATTINY427-MF.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATTINY427-MF подходит для 6 применениеs: Industrial Sensor and Actuator Controller, Smart Home Sensor Node, LED Lighting Controller, Battery-Powered Accessory Controller, Building Automation Module, Compact Communication Interface Node.
Industrial Sensor and Actuator Controller
The ATTINY427-MF fits compact sensor-hub and actuator-control designs because its 20 MHz AVR CPU, hardware multiplier, and Core Independent Peripherals architecture can handle real-time control tasks without a larger processor. The 4 KB Flash accommodates a focused firmware image, while 512 B of SRAM and 128 B of EEPROM provide space for working state and retained configuration. Place the device between sensor conditioning and actuator drive circuits, keep analog inputs away from switching nodes, and validate timing at the system’s worst-case operating conditions.
Рекомендуется
Smart Home Sensor Node
The ATTINY427-MF is appropriate for a low-power smart-home sensor node that combines local sensing, configuration storage, and simple actuator logic. Its 4 KB Flash supports compact application firmware, and the 128 B EEPROM can retain calibration or network configuration across power cycles. Use the 20 MHz operating capability for responsive peripheral coordination, then disable unused functions and choose the lowest acceptable clock setting where average power consumption is the priority.
Рекомендуется
LED Lighting Controller
The ATTINY427-MF can control addressable or multi-channel LED lighting systems where deterministic timing and compact routing matter. Its 20 MHz AVR CPU is suitable for updating output states and coordinating timer-driven effects, while Core Independent Peripherals can reduce CPU involvement in peripheral events. Keep high-current LED drive stages separate from the microcontroller, provide local supply decoupling, and route switching currents away from the device ground and analog inputs to reduce noise coupling.
Рекомендуется
Battery-Powered Accessory Controller
The ATTINY427-MF suits compact battery-powered accessories that need local control, nonvolatile settings, and low peripheral overhead. Its 4 KB Flash is sufficient for focused firmware, and its EEPROM can preserve user configuration without consuming RAM. Review clock, unused-peripheral, and sleep-mode settings during power-budget calculations, and validate average current against the accessory’s battery target rather than relying only on the maximum CPU frequency.
Рекомендуется
Building Automation Module
The ATTINY427-MF can serve as the local controller in a compact building-automation module that monitors inputs and manages relays, indicators, or communication interfaces. The 20 MHz processor and Core Independent Peripherals architecture support responsive event-driven control, while 512 B of SRAM and 128 B of EEPROM are useful for operating state and configuration. Separate field-side switching energy from sensitive logic, provide robust input conditioning, and verify timing behavior across the full product temperature range.
Рекомендуется
Compact Communication Interface Node
The ATTINY427-MF is suitable for a compact protocol or communication interface node when the application needs an 8-bit controller rather than a high-performance system processor. Its AVR CPU with hardware multiplier can manage framing, state handling, and peripheral events, while the tinyAVR 2 event architecture reduces polling overhead. Match the selected communication peripheral and I/O requirements to the pin-description table, keep the data interface away from switching regulators, and test timing margin with realistic bus loading.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATTINY427-MF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATtiny827-MF |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 24-pin VQFN (4 x 4 mm) | 24-pin VQFN (4 x 4 mm) |
| Maximum CPU Frequency | 20 MHz | 20 MHz |
| Flash Memory | 4 KB | 8 KB |
| SRAM | 512 B | 1 KB |
| EEPROM | 128 B | 128 B |
| CPU Core | AVR with hardware multiplier | AVR with hardware multiplier |
| Architecture | Core Independent Peripherals | Core Independent Peripherals |
| Program Memory Organization | 4K x 8 | 8K x 8 |
Ключевые отличия
- Lower Flash requirement for focused control firmware (против ATtiny827-MF)
- Lower SRAM requirement for compact control tasks (против ATtiny827-MF)
- Shared compact package and family architecture (против ATtiny827-MF)
Заметки по проектированию
Follow the manufacturer land pattern for the 24-pin VQFN and place all decoupling capacitors close to their intended supply pins. VQFN packages are difficult to inspect after assembly, so verify pad dimensions, solder-mask clearance, and paste volume against the latest Microchip package drawing before fabrication. Preserve solderable leads and thermal-via access on the exposed pad area if the package drawing specifies one.
Budget the supply voltage and operating current across active, low-frequency, and sleep operating states. The 20 MHz CPU rate is a maximum capability rather than a constant-power requirement. Use the manufacturer electrical-characteristics table to select the regulator headroom and decoupling network, and avoid tying unused I/O pins to a voltage source that could create an unintended path through protection circuitry.
Separate analog sensing paths, communication lines, and timing-sensitive outputs from relay, motor, LED, and switching-converter paths. Keep the ground return from the microcontroller local and continuous, and provide a low-impedance reference plane beneath the device. When an exposed pad is present, follow the package drawing’s connection and via recommendations rather than treating it as an unrestricted thermal or electrical region.
Do not assume that another tinyAVR 2 device is interchangeable solely because it uses a similar package. Confirm the exact pin count, exposed-pad arrangement, reset behavior, peripheral multiplexing, clock requirements, memory map, and operating voltage before using a substitute. In particular, ATtiny827-MF provides twice the Flash and SRAM of ATTINY427-MF, which is beneficial for memory growth but still requires software and timing review.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code.