ATTINY824-XU - 20MHz 8KB Flash AVR MCU | Microchip
MPN: ATTINY824-XU ✓ نشطATTINY824-XU نظرة عامة
A microcontroller such as the ATTINY824 integrates a processor core, program memory, data memory, and peripherals such as GPIO, timers, serial interfaces, and analog functions into one device. In the system hierarchy, an MCU is a semiconductor and embedded-control IC that sits above simple logic components and below application-specific controllers. The ATTINY824 family is positioned for small control nodes, sensor interfaces, actuator drivers, and compact consumer or industrial products.
The ATTINY824 uses the AVR instruction architecture with a hardware multiplier and operates up to 20 MHz. Its 8 KB Flash memory provides program storage, while 1 KB SRAM supports working data and 128 bytes of EEPROM provides nonvolatile storage. The 14-pin TSSOP package is suitable for compact PCB layouts, while the peripheral set supports common embedded designs including UART, I2C, SPI, PWM, timers, and analog signal conditioning. The device is identified in the available product information as an industrial-temperature, green part.
The architecture is useful when firmware timing, interrupt responsiveness, and peripheral integration matter more than maximum memory capacity. The AVR CPU executes 16-bit and 32-bit instructions, and the family data sheet describes the Flash organization as pages of 4K x 16 bits. Program development is supported by the AVR tool ecosystem and in-system programming, allowing firmware to be programmed and updated through the device programming interface.
Typical applications include low-cost sensor nodes, compact motor and relay controllers, LED and lighting control, UART-connected measurement equipment, and small industrial control modules. The part is particularly suitable when the design requires more integration than a simple logic IC but less memory and processing complexity than a larger microcontroller platform.
Designers should preserve the pin assignments shown in the manufacturer datasheet, provide the required decoupling and programming connections, and verify the exact package variant before PCB release. When upgrading or substituting a device, compare memory size, peripheral configuration, timing, temperature grade, and pin compatibility rather than relying only on the device family name.
This product page combines the manufacturer identification, distributor technical summaries, package information, application guidance, drop-in comparison candidates, and design considerations to support faster engineering review and sourcing decisions.
بدائل مباشرة لـ ATTINY824-XU — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
ATTINY1624-XU
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATTINY1624-XFR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATTINY824-XU الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit microcontroller |
| Architecture | AVR tinyAVR 2 |
| أقصى تردد للساعة | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| SRAM | 1 KB |
| EEPROM | 128 bytes |
| CPU Core | 8-bit AVR |
| Hardware Multiplier | Present |
| العلبة | 14-pin TSSOP |
| نوع التركيب | Surface Mount |
| درجة حرارة التشغيل | Industrial, 85°C maximum |
| Serial Interfaces | UART, I2C, SPI |
| Programming | In-system programmable |
| Flash Organization | 4K x 16-bit pages |
| Green Classification | Green |
دليل تكوين أطراف ATTINY824-XU 14-pin tssop
تكوين الأطراف لـ ATTINY824-XU (حزمة 14-pin tssop). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATTINY824-XU.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
ATTINY824-XU مناسب لـ 6 التطبيقs: Compact Sensor Interface Controller, Small Motor and Relay Controller, LED Lighting and Display Control, UART Measurement and Service Module, Battery-Powered Environmental Monitor, Consumer Appliance Auxiliary Controller.
Compact Sensor Interface Controller
The ATTINY824-XU fits compact sensor nodes because its 20 MHz 8-bit AVR core can service timers, interrupts, UART, I2C, and SPI without requiring a higher-complexity processor. The 8 KB Flash footprint is suitable for acquisition, filtering, thresholding, calibration, and communication firmware when the application does not need the larger memory option. Its 14-pin TSSOP package helps reduce board area in densely populated sensing equipment. The main design consideration is to allocate pins for the selected sensor interface while retaining the programming signals required for in-system programming.
موصى به
Small Motor and Relay Controller
The ATTINY824-XU can coordinate a small motor, relay, or solenoid system using its 20 MHz AVR processing capability and integrated timing functions. Timers and PWM allow deterministic switching sequences, while GPIO and serial interfaces support limit sensors, buttons, and supervisory commands. The 8 KB program memory is appropriate for basic motion patterns, debouncing, fault handling, and communication protocols. Engineers should size external drive transistors and protection components for the load rather than driving inductive outputs directly from the MCU.
موصى به
LED Lighting and Display Control
The ATTINY824-XU is appropriate for compact LED lighting modules because the 20 MHz core supports timed effects, button handling, status logic, and communication in a small 14-pin TSSOP footprint. PWM-capable peripherals can generate dimming and animation patterns while GPIO manages additional indicator channels. The 8 KB Flash capacity is suitable for fixed lighting sequences and simple user interfaces. For installations requiring extensive scene storage, animation libraries, or network stacks, the 16 KB ATTINY1624-XU provides additional program space in the same listed package format.
موصى به
UART Measurement and Service Module
The ATTINY824-XU can act as a compact measurement front end that receives commands and reports results over UART or uses I2C and SPI to communicate with sensing hardware. Its 20 MHz speed supports responsive protocol handling, while 1 KB SRAM provides working space for buffering and 128 bytes of EEPROM retain small configuration values. The device fits instrument panels, board-level test fixtures, and service interfaces where space and power are constrained. Production designs should include a defined reset behavior and a reliable way to update firmware without disconnecting the end product.
موصى به
Battery-Powered Environmental Monitor
The ATTINY824-XU suits low-power environmental monitoring because the tinyAVR architecture combines processing and peripherals in a compact 14-pin TSSOP package. An 8-bit core can perform periodic readings, threshold evaluation, sleep/wake control, and local logging while UART or another serial interface reports results. The 8 KB Flash footprint is adequate for moderate algorithm and firmware complexity. Power optimization should focus on minimizing active time, disabling unused peripherals, and selecting external sensors and regulators that match the system's voltage and quiescent-current requirements.
موصى به
Consumer Appliance Auxiliary Controller
The ATTINY824-XU can manage auxiliary functions in compact consumer appliances, including button input, status indication, sensor supervision, and controlled actuator outputs. The 20 MHz AVR core provides useful timing headroom for debouncing, interlocks, and communication tasks, while the industrial 85°C listing supports environments above typical room-temperature consumer limits. Its small TSSOP package simplifies integration near a display or control module. Engineers should use the family data sheet to assign pins and confirm that every control output remains safe during reset and firmware programming.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATTINY824-XU — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ATTINY1624-XU | ATTINY1624-XFR |
|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 16 KB | 16 KB |
| Core | 8-bit | 8-bit | 8-bit |
| Operating Temperature | Industrial, 85°C maximum | Industrial, 85°C maximum | 125°C maximum |
| Green Classification | Green | Green | Green |
أبرز الفروقات
- Lower Flash option within the same identified 14-TSSOP and 20 MHz class (مقابلATTINY1624-XU)
- Lower listed maximum temperature rating (مقابلATTINY1624-XFR)
- Same package and core-speed basis while retaining a distinct memory option (مقابلATTINY1624-XU)
ملاحظات التصميم
Use the 14-pin TSSOP land pattern and verify it against the manufacturer package drawing before releasing artwork. Do not reuse a 14-pin SOIC footprint even though both packages contain 14 leads; body width, lead span, and solder-pad geometry differ. Place input/output decoupling capacitors close to their associated supply pins and maintain the manufacturer datasheet's recommended layout for sensitive analog and communication signals.
Treat ATTINY824-XU and ATTINY1624-XU as close alternatives rather than identical devices because their Flash capacities differ by 8 KB. Before substitution, check the pin-description table, peripheral mapping, fuse or configuration behavior, clock limits, and programming procedure. A larger Flash device can affect boot, bootloader size, and firmware organization even when the package and clock are unchanged.
Estimate worst-case power use from processor activity, I/O loading, and peripheral operation rather than assuming the 20 MHz clock alone determines consumption. For battery-powered designs, disable unused peripherals, place the AVR in its intended sleep state, and wake it only for scheduled measurements. Confirm the external regulator's voltage range and quiescent current against the MCU operating requirements before finalizing the power tree.
Keep the AVR programming interface accessible and route it away from switching nodes and long sensor inputs. If an external clock or sensitive analog input is used, follow the family data sheet for grounding and decoupling. For UART, I2C, or SPI links, check rise-time and pull-up requirements during schematic review; correct package assignment alone does not guarantee interface-level signal integrity.
معلومات الامتثال
The distributor listing identifies ATTINY824-XU as a green industrial-temperature device, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not included in the available product information.