Microchip Technology

ATTINY824-XU - 20MHz 8KB Flash AVR MCU | Microchip

MPN: ATTINY824-XU ✓ فعال
14-pin TSSOP Package 20 MHz Speed 8 KB (8K x 8) Memory
حداقل سفارش: 1 |

ATTINY824-XU نمای کلی

The Microchip Technology ATTINY824-XU is an 8-bit tinyAVR 2 microcontroller with an AVR CPU, hardware multiplier, up to 20 MHz operating frequency, 8 KB Flash, 1 KB SRAM, and 128 bytes of EEPROM in a 14-pin TSSOP package. It is designed for compact embedded-control designs that require deterministic peripheral handling, low component count, and an integrated AVR development ecosystem.

A microcontroller such as the ATTINY824 integrates a processor core, program memory, data memory, and peripherals such as GPIO, timers, serial interfaces, and analog functions into one device. In the system hierarchy, an MCU is a semiconductor and embedded-control IC that sits above simple logic components and below application-specific controllers. The ATTINY824 family is positioned for small control nodes, sensor interfaces, actuator drivers, and compact consumer or industrial products.

The ATTINY824 uses the AVR instruction architecture with a hardware multiplier and operates up to 20 MHz. Its 8 KB Flash memory provides program storage, while 1 KB SRAM supports working data and 128 bytes of EEPROM provides nonvolatile storage. The 14-pin TSSOP package is suitable for compact PCB layouts, while the peripheral set supports common embedded designs including UART, I2C, SPI, PWM, timers, and analog signal conditioning. The device is identified in the available product information as an industrial-temperature, green part.

The architecture is useful when firmware timing, interrupt responsiveness, and peripheral integration matter more than maximum memory capacity. The AVR CPU executes 16-bit and 32-bit instructions, and the family data sheet describes the Flash organization as pages of 4K x 16 bits. Program development is supported by the AVR tool ecosystem and in-system programming, allowing firmware to be programmed and updated through the device programming interface.

Typical applications include low-cost sensor nodes, compact motor and relay controllers, LED and lighting control, UART-connected measurement equipment, and small industrial control modules. The part is particularly suitable when the design requires more integration than a simple logic IC but less memory and processing complexity than a larger microcontroller platform.

Designers should preserve the pin assignments shown in the manufacturer datasheet, provide the required decoupling and programming connections, and verify the exact package variant before PCB release. When upgrading or substituting a device, compare memory size, peripheral configuration, timing, temperature grade, and pin compatibility rather than relying only on the device family name.

This product page combines the manufacturer identification, distributor technical summaries, package information, application guidance, drop-in comparison candidates, and design considerations to support faster engineering review and sourcing decisions.

جایگزین‌های drop-in برای ATTINY824-XU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

ATTINY1624-XU

✅ جایگزین مستقیم
📦 14-TSSOP
Flash is 16 KB versus 8 KB, while the listed 20 MHz speed, 14-TSSOP package, industrial 85°C rating, and green classification remain matched

📋 جایگزین مرجع (خارج از کاتالوگ)

ATTINY1624-XFR

✅ جایگزین مستقیم
📦 14-TSSOP
Flash is 16 KB versus 8 KB and the listed temperature rating is 125°C versus 85°C; the 20 MHz speed and 14-TSSOP format are matched

📋 جایگزین مرجع (خارج از کاتالوگ)

ATTINY824-XU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8-bit microcontroller
Architecture AVR tinyAVR 2
حداکثر فرکانس کلاک 20 MHz
Flash Memory 8 KB (8K x 8)
SRAM 1 KB
EEPROM 128 bytes
CPU Core 8-bit AVR
Hardware Multiplier Present
بسته‌بندی 14-pin TSSOP
نوع نصب Surface Mount
دمای کاری Industrial, 85°C maximum
Serial Interfaces UART, I2C, SPI
Programming In-system programmable
Flash Organization 4K x 16-bit pages
Green Classification Green

راهنمای پیکربندی پین ATTINY824-XU 14-pin tssop

پیکربندی پین برای ATTINY824-XU (پکیج 14-pin tssop). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 14-pin tssop برای ATTINY824-XU

داده پین‌آوت تفصیلی موجود نیست برای ATTINY824-XU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATTINY824-XU مناسب است برای 6 کاربردs: Compact Sensor Interface Controller, Small Motor and Relay Controller, LED Lighting and Display Control, UART Measurement and Service Module, Battery-Powered Environmental Monitor, Consumer Appliance Auxiliary Controller.

🧩

Compact Sensor Interface Controller

The ATTINY824-XU fits compact sensor nodes because its 20 MHz 8-bit AVR core can service timers, interrupts, UART, I2C, and SPI without requiring a higher-complexity processor. The 8 KB Flash footprint is suitable for acquisition, filtering, thresholding, calibration, and communication firmware when the application does not need the larger memory option. Its 14-pin TSSOP package helps reduce board area in densely populated sensing equipment. The main design consideration is to allocate pins for the selected sensor interface while retaining the programming signals required for in-system programming.

🏭

Small Motor and Relay Controller

The ATTINY824-XU can coordinate a small motor, relay, or solenoid system using its 20 MHz AVR processing capability and integrated timing functions. Timers and PWM allow deterministic switching sequences, while GPIO and serial interfaces support limit sensors, buttons, and supervisory commands. The 8 KB program memory is appropriate for basic motion patterns, debouncing, fault handling, and communication protocols. Engineers should size external drive transistors and protection components for the load rather than driving inductive outputs directly from the MCU.

💡

LED Lighting and Display Control

The ATTINY824-XU is appropriate for compact LED lighting modules because the 20 MHz core supports timed effects, button handling, status logic, and communication in a small 14-pin TSSOP footprint. PWM-capable peripherals can generate dimming and animation patterns while GPIO manages additional indicator channels. The 8 KB Flash capacity is suitable for fixed lighting sequences and simple user interfaces. For installations requiring extensive scene storage, animation libraries, or network stacks, the 16 KB ATTINY1624-XU provides additional program space in the same listed package format.

🔧

UART Measurement and Service Module

The ATTINY824-XU can act as a compact measurement front end that receives commands and reports results over UART or uses I2C and SPI to communicate with sensing hardware. Its 20 MHz speed supports responsive protocol handling, while 1 KB SRAM provides working space for buffering and 128 bytes of EEPROM retain small configuration values. The device fits instrument panels, board-level test fixtures, and service interfaces where space and power are constrained. Production designs should include a defined reset behavior and a reliable way to update firmware without disconnecting the end product.

🌐

Battery-Powered Environmental Monitor

The ATTINY824-XU suits low-power environmental monitoring because the tinyAVR architecture combines processing and peripherals in a compact 14-pin TSSOP package. An 8-bit core can perform periodic readings, threshold evaluation, sleep/wake control, and local logging while UART or another serial interface reports results. The 8 KB Flash footprint is adequate for moderate algorithm and firmware complexity. Power optimization should focus on minimizing active time, disabling unused peripherals, and selecting external sensors and regulators that match the system's voltage and quiescent-current requirements.

📱

Consumer Appliance Auxiliary Controller

The ATTINY824-XU can manage auxiliary functions in compact consumer appliances, including button input, status indication, sensor supervision, and controlled actuator outputs. The 20 MHz AVR core provides useful timing headroom for debouncing, interlocks, and communication tasks, while the industrial 85°C listing supports environments above typical room-temperature consumer limits. Its small TSSOP package simplifies integration near a display or control module. Engineers should use the family data sheet to assign pins and confirm that every control output remains safe during reset and firmware programming.

خلاصه محصولات پیشنهادی

ATTINY1624-XU Same-family option with 16 KB Flash for larger sensor firmware استفاده‌شده در: Compact Sensor Interface Controller, Small Motor and Relay Controller, LED Lighting and Display Control, UART Measurement and Service Module, Battery-Powered Environmental Monitor, Consumer Appliance Auxiliary Controller ATXMEGA64A1-CUR Microchip Technology استفاده‌شده در: Compact Sensor Interface Controller, Consumer Appliance Auxiliary Controller
What is the ATTINY824-XU?
The ATTINY824-XU is an 8-bit tinyAVR 2 microcontroller from Microchip Technology with an AVR CPU, hardware multiplier, up to 20 MHz operation, 8 KB Flash, 1 KB SRAM, and 128 bytes of EEPROM. According to the Microchip product page, it is offered in 14-pin TSSOP and SOIC packages. The device is suited to compact embedded-control systems requiring integrated timers, serial interfaces, analog functions, and in-system programmability.
What are the key specifications of ATTINY824-XU that engineers should know?
The ATTINY824-XU combines an 8-bit AVR core with a hardware multiplier, 20 MHz maximum clock, 8 KB Flash, 1 KB SRAM, and 128 bytes of EEPROM. The manufacturer product page identifies 14-pin TSSOP and SOIC package options, while the distributor listing identifies the exact ATTINY824-XU order code as a 14-TSSOP industrial-temperature green device. Its compact footprint and broad set of embedded peripherals make it useful for compact control, sensor, and communication modules.
Where can I download the ATTINY824-XU datasheet PDF?
The official family data sheet is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny424-426-427-824-826-827-DataSheet-DS40002311A.pdf. It covers the ATtiny424, ATtiny426, ATtiny427, ATtiny824, ATtiny826, and ATtiny827 family, including memory organization and device features. Use the pin-description and electrical tables from that document when assigning PCB nets and validating operating conditions.
Where can I find the ATTINY824-XU pinout?
The ATTINY824-XU pinout is documented in the Microchip ATtiny424/426/427/824/826/827 family data sheet, particularly the package pin-description and pinout sections. The exact ATTINY824-XU order code uses a 14-pin TSSOP package. When assigning signals, use the package-specific pin table rather than transferring a pinout from a 14-pin SOIC or another ATtiny family member without checking the document.
Is ATTINY824-XU suitable for low-cost embedded control applications?
Yes, ATTINY824-XU is suitable for compact embedded-control applications when the design requires an 8-bit AVR processor, 8 KB of program memory, and integrated peripherals in a 14-pin TSSOP package. Its 20 MHz clock and hardware multiplier support responsive control logic, while UART, I2C, SPI, timers, and PWM reduce the need for external components. It is a strong fit for sensor interfaces, small actuator controllers, LED control, and compact instrumentation.
What is the difference between ATTINY824-XU and ATTINY1624-XU?
The main documented difference is Flash memory: ATTINY824-XU has 8 KB, while ATTINY1624-XU has 16 KB. Both are listed as 20 MHz, 14-TSSOP, industrial-temperature, green 8-bit microcontrollers. ATTINY1624-XU therefore provides twice the program memory while retaining the same stated clock and package format, making it the more relevant candidate when firmware size or future expansion is the deciding factor.
Can ATTINY1624-XU replace ATTINY824-XU?
ATTINY1624-XU is a strong drop-in candidate because the comparison data lists both devices as 20 MHz, TSSOP14, industrial-temperature, green microcontrollers, with the same 8-bit architecture. Its principal difference is 16 KB Flash versus 8 KB Flash. Firmware images sized for the ATtiny824 should normally fit, but engineers should still verify every peripheral, pin function, timing parameter, and programming configuration before approving the substitution.
When should I choose ATTINY824-XU over ATTINY1624-XU?
Choose ATTINY824-XU when 8 KB of Flash is sufficient and the lower-memory device better matches the product's firmware footprint. Choose ATTINY1624-XU when the firmware needs more program space, future features are expected, or the extra 8 KB avoids a redesign. Both candidates are described as 20 MHz 14-TSSOP industrial-temperature green devices, so memory capacity and verified peripheral compatibility should drive the decision.
What can replace ATTINY824-XU?
The strongest identified replacement candidate is ATTINY1624-XU, which is listed with the same 20 MHz speed, 14-TSSOP package, industrial temperature rating, and green classification, while increasing Flash from 8 KB to 16 KB. Other ATtiny comparisons in the search results use different packages or memory arrangements, so they are not automatically drop-in replacements. Validate the candidate against the exact pin, peripheral, timing, and programming requirements.
Is ATTINY824-XU the same as ATTINY1624-XU?
No. ATTINY824-XU and ATTINY1624-XU share the principal comparison attributes of an 8-bit, 20 MHz, 14-TSSOP, industrial-temperature green microcontroller, but their Flash capacities differ: 8 KB versus 16 KB. The larger memory in ATTINY1624-XU can change the software image size and programming requirements even though the package format is the same. They are closely related alternatives, not identical devices.
What is the best Microchip equivalent for ATTINY824-XU?
ATTINY1624-XU is the best identified Microchip equivalent for ATTINY824-XU because it matches the stated 20 MHz operating speed, 14-TSSOP package, industrial-temperature classification, and green designation. It also retains 16 KB of Flash, twice the ATtiny824's 8 KB. The ATtiny1624 comparison entry provides the strongest cross-reference basis, although final substitution still requires verification of peripheral details and package pin functions.
Where can I buy ATTINY824-XU online?
Use the Request a Quote form on this page to request ATTINY824-XU availability, current commercial terms, and lead time. The product is listed as an active Microchip device in comparison information and is carried under the exact ATTINY824-XU order code by major distributors. Current stock, order quantity, and shipment timing should be confirmed through the quote workflow rather than assumed from a static listing.
What is the price of ATTINY824-XU?
Submit the ATTINY824-XU part number through the Request a Quote form on this page for current pricing and quantity-break terms. Commercial pricing can change with currency, volume, packaging, and market conditions, so this page does not publish a potentially stale fixed price. The request can also confirm whether the required 14-TSSOP ATTINY824-XU order code is available for your production quantity.
What is the lead time for ATTINY824-XU?
Request the current ATTINY824-XU lead time through the Request a Quote form on this page. Lead time depends on the exact package suffix, order quantity, manufacturing status, and inventory position. Microchip identifies the ATtiny824 as an active product family, and the exact ATTINY824-XU is represented in active-status comparison data, but a production schedule should be confirmed when the order is placed.
Is ATTINY824-XU in stock?
Request current stock for ATTINY824-XU using the Request a Quote form on this page. The exact device is listed as active and is offered through distribution channels, but inventory at any particular quantity can change rapidly. Include your required order quantity, date code preference, and production schedule in the request so the returned commercial response matches the actual build plan.
What design checks are required for an ATTINY824-XU PCB?
Check the package pinout, power pins, decoupling requirements, programming interface, clock arrangement, and unused pins against the Microchip family data sheet before fabrication. The ATTINY824-XU is a 14-pin TSSOP device, so its land pattern must not be copied from a 14-pin SOIC board without checking dimensions. Also confirm the configured clock source and keep programming access practical for firmware updates and manufacturing.

داده‌های مرجع مهندسی برای ATTINY824-XU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATTINY824-XU when its 8 KB Flash comfortably holds the application firmware and the 85°C industrial rating is appropriate. It provides a 20 MHz 8-bit AVR core, 1 KB SRAM, 128 bytes of EEPROM, and a 14-pin TSSOP package for compact embedded-control designs. Select ATTINY1624-XU when the same listed clock and package are useful but twice the Flash memory would reduce firmware risk or provide expansion capacity. ATTINY1624-XFR is appropriate when its 125°C rating is required, although its wider temperature range and different suffix should be checked against production requirements. Confirm exact pin functions, peripheral availability, clock settings, programming behavior, and supply requirements for whichever device is approved.

مقایسه با جایگزین‌ها

پارامتر این محصول ATTINY1624-XU ATTINY1624-XFR
Package 14-TSSOP 14-TSSOP 14-TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz
Flash Memory 8 KB 16 KB 16 KB
Core 8-bit 8-bit 8-bit
Operating Temperature Industrial, 85°C maximum Industrial, 85°C maximum 125°C maximum
Green Classification Green Green Green

تفاوت‌های کلیدی

  • Lower Flash option within the same identified 14-TSSOP and 20 MHz class (در مقابلATTINY1624-XU)
  • Lower listed maximum temperature rating (در مقابلATTINY1624-XFR)
  • Same package and core-speed basis while retaining a distinct memory option (در مقابلATTINY1624-XU)

یادداشت‌های طراحی

Use the 14-pin TSSOP land pattern and verify it against the manufacturer package drawing before releasing artwork. Do not reuse a 14-pin SOIC footprint even though both packages contain 14 leads; body width, lead span, and solder-pad geometry differ. Place input/output decoupling capacitors close to their associated supply pins and maintain the manufacturer datasheet's recommended layout for sensitive analog and communication signals.

Treat ATTINY824-XU and ATTINY1624-XU as close alternatives rather than identical devices because their Flash capacities differ by 8 KB. Before substitution, check the pin-description table, peripheral mapping, fuse or configuration behavior, clock limits, and programming procedure. A larger Flash device can affect boot, bootloader size, and firmware organization even when the package and clock are unchanged.

Estimate worst-case power use from processor activity, I/O loading, and peripheral operation rather than assuming the 20 MHz clock alone determines consumption. For battery-powered designs, disable unused peripherals, place the AVR in its intended sleep state, and wake it only for scheduled measurements. Confirm the external regulator's voltage range and quiescent current against the MCU operating requirements before finalizing the power tree.

Keep the AVR programming interface accessible and route it away from switching nodes and long sensor inputs. If an external clock or sensitive analog input is used, follow the family data sheet for grounding and decoupling. For UART, I2C, or SPI links, check rise-time and pull-up requirements during schematic review; correct package assignment alone does not guarantee interface-level signal integrity.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The distributor listing identifies ATTINY824-XU as a green industrial-temperature device, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not included in the available product information.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ATTINY824-XU datasheet ATTINY824-XU datasheet pdf ATTINY824-XU pinout ATTINY824-XU specifications ATTINY824-XU price ATTINY824-XU stock ATTINY824-XU equivalent ATTINY824-XU replacement ATTINY824-XU vs ATTINY1624-XU Microchip ATTINY824-XU ATTINY824 14-TSSOP pinout ATTINY824-XU application circuit ATTINY824-XU programming

قطعات و اصطلاحات مرتبط

Microchip Technology ATTINY824-XU ATTINY1624-XU ATTINY1624-XFR ATtiny824 AVR tinyAVR 2 8-bit microcontroller embedded-control IC semiconductor hardware multiplier Flash memory SRAM EEPROM UART I2C SPI PWM in-system programming 14-pin TSSOP TSSOP package family surface-mount package industrial temperature grade sensor interface controller motor and relay controller
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ