Microchip Technology

ATXMEGA64B3-MN 32MHz 64KB AVR Microcontroller | Microchip

MPN: ATXMEGA64B3-MN ✓ نشط
1.6 V to 3.6 V Vdss 64-pin QFN with exposed pad Package 32 MHz Speed 64 KB Memory
الحد الأدنى للطلب: 1 |

ATXMEGA64B3-MN نظرة عامة

The Microchip ATXMEGA64B3-MN is a low-power, high-performance 8/16-bit AVR microcontroller with 64 KB of self-programming Flash memory, 4 KB of SRAM, 2 KB of EEPROM, and up to 32 MIPS throughput at 32 MHz. It is supplied in a 64-pin QFN package with an exposed pad and operates from 1.6 V to 3.6 V. The device also includes a 4 KB boot-code section, a two-channel DMA controller, a four-channel event system, and a USB full-speed device interface.

An 8/16-bit AVR microcontroller combines a RISC processor core, embedded Flash program memory, SRAM, EEPROM, and dedicated peripherals on one integrated circuit. These devices occupy the microcontroller level of the embedded-computing hierarchy and can provide a compact, low-power control platform for consumer equipment, industrial products, communications equipment, and human-interface devices. The ATxmega B3 family supports both standalone USB connectivity and segmented LCD control in the same device.

The ATXMEGA64B3-MN provides 64 KB of self-programming Flash with read-while-write capability, including a dedicated 4 KB boot-code section. Its 4 KB SRAM supports working data, while 2 KB of internal EEPROM provides nonvolatile storage without an external memory component. The two-channel DMA controller and four-channel event system can transfer data and route events between peripherals, reducing processor intervention in timing-sensitive designs.

The USB full-speed device interface supports direct USB connectivity, while the integrated LCD controller can drive up to four by 25 segments. The processor supports up to 32 MIPS at 32 MHz, giving it substantially more performance headroom than a conventional 8-bit AVR device while retaining the familiar AVR instruction set and peripheral ecosystem. Thirty-six general-purpose I/O lines are identified for the ATxmega64B3 family in the manufacturer documentation.

Typical uses include USB-connected human-interface devices, segmented display controllers, industrial control panels, compact data-acquisition equipment, and embedded accessories that need local data storage. The boot-code section can support controlled startup or firmware-update workflows, while internal EEPROM is useful for calibration values, configuration data, and counters that must survive power cycles.

Design with the 1.6 V to 3.6 V operating range in mind, particularly when using USB-powered equipment. The 64-pin QFN package requires careful PCB layout, adequate thermal-via placement beneath the exposed pad, and attention to high-speed USB routing. The listed 105°C maximum temperature identifies the device as suitable for demanding industrial-temperature designs when the complete system and board materials support that range.

This product page combines the manufacturer's core device characteristics with application guidance, package considerations, sourcing information, and an explicit assessment of drop-in replacement availability. Because pin-compatible alternatives must match the exact QFN footprint and electrical behavior, no substitute is presented unless its compatibility can be substantiated.

بدائل مباشرة لـ ATXMEGA64B3-MN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

ATXMEGA64B3-MN الحدود القصوى والخصائص الكهربائية

Product Type 8/16-bit AVR microcontroller
Series ATxmega B3
أقصى تردد للساعة 32 MHz
Maximum Throughput 32 MIPS
Flash Program Memory 64 KB
Boot Code Section 4 KB
SRAM 4 KB
EEPROM 2 KB
Program Memory Type Self-programming Flash with read-while-write
DMA Controller 2 channels
Event System 4 channels
USB Interface USB Full Speed Device
LCD Controller Up to 4 x 25 segments
General-Purpose I/O 36 lines
Supply Voltage Range 1.6 V to 3.6 V
Maximum Temperature 105 °C
العلبة 64-pin QFN with exposed pad
نوع التركيب Surface mount
حالة RoHS RoHS listed by the manufacturer

دليل تكوين أطراف ATXMEGA64B3-MN 64-pin qfn with exposed pad

تكوين الأطراف لـ ATXMEGA64B3-MN (حزمة 64-pin qfn with exposed pad). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 64-pin qfn with exposed pad لـ ATXMEGA64B3-MN

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ ATXMEGA64B3-MN.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

ATXMEGA64B3-MN مناسب لـ 6 التطبيقs: USB Human-Interface Devices, Segmented LCD Instrument Panels, Industrial Data Acquisition, Bootloader and Field-Updatable Products, Connected Sensor Hubs, Low-Power Embedded Control.

🖥️

USB Human-Interface Devices

The ATXMEGA64B3-MN fits USB-connected keyboards, control pads, and configuration interfaces because it combines a USB Full Speed Device controller with up to 32 MIPS of processing performance. Its 4 KB SRAM supports protocol buffering and interface state, while the two-channel DMA controller can transfer data with less processor involvement. The 1.6 V to 3.6 V operating range also permits integration into compact USB-powered products. Design the USB traces as a controlled-impedance interface, provide the required bus-disconnect and power-management behavior, and route sensitive analog or reference circuitry away from high-current switching nodes.

📺

Segmented LCD Instrument Panels

The integrated LCD controller makes the ATXMEGA64B3-MN appropriate for numerical meters, laboratory panels, and compact process displays with up to 4 x 25 segments. Its 64 KB Flash provides room for application firmware, graphics, menu logic, and communication protocols, while the four-channel event system can coordinate display updates with external activity. At a 32 MHz maximum clock, the device can maintain responsive controls and measurement handling. Select the display according to the controller’s voltage and bias requirements, and validate contrast, segment drive, update timing, and temperature performance across the intended operating range.

🏭

Industrial Data Acquisition

The ATXMEGA64B3-MN supports compact data-acquisition modules that need local buffering, removable configuration, and fast host connectivity. Four KB of SRAM can hold working samples and protocol buffers, while the two-channel DMA controller can move peripheral data without tying the CPU to every transfer. Its listed 105 °C maximum temperature is useful for industrial-temperature designs, although enclosure temperature and PCB reliability must also be considered. The USB Full Speed Device interface can connect the module to a host for configuration and export, while EEPROM can preserve calibration constants between power cycles.

🧩

Bootloader and Field-Updatable Products

The 4 KB boot-code section in the ATXMEGA64B3-MN supports a protected startup routine that can validate an application image before transferring control to the 64 KB Flash program area. Read-while-write operation and 2 KB of EEPROM add useful options for update state, device configuration, and production information. A robust design should include image validation, controlled rollback behavior, write endurance management, and a recovery path. The available supply range and low-power microcontroller architecture suit battery-operated accessories and compact embedded controllers where update reliability is important.

🧩

Connected Sensor Hubs

The ATXMEGA64B3-MN can act as the local controller in a sensor hub that combines sampling, event handling, local storage, and USB communication. The four-channel event system is useful for timestamping or routing peripheral events, while DMA supports background transfers and reduces processor load. Its 2 KB EEPROM can hold sensor offsets, device identifiers, and configuration records, and 4 KB of SRAM provides a practical working area. Keep analog inputs on a controlled layout, observe signal-integrity requirements near the QFN pins, and confirm the device’s operating limits against the enclosure and sensor environment.

⚡

Low-Power Embedded Control

The ATXMEGA64B3-MN fits compact embedded controllers that need more memory and event-driven peripherals than a basic 8-bit AVR while retaining the AVR software ecosystem. Internal Flash, SRAM, EEPROM, DMA, and the event system can reduce the need for external memory and discrete support components. Its 1.6 V to 3.6 V supply range allows direct integration into multi-voltage systems when the downstream loads and peripherals use compatible levels. Power modes, sleep-entry conditions, peripheral clocks, and load behavior should be evaluated together to determine battery life rather than relying on active-processing performance alone.

What is the ATXMEGA64B3-MN?
The ATXMEGA64B3-MN is a Microchip ATxmega B3 8/16-bit AVR microcontroller rated for operation from 1.6 V to 3.6 V, with 64 KB of self-programming Flash, 4 KB of SRAM, and 2 KB of EEPROM. According to the Microchip product page, it operates at up to 32 MHz and delivers up to 32 MIPS. It also includes USB Full Speed Device connectivity, a two-channel DMA controller, a four-channel event system, and an LCD controller for up to 4 x 25 segments.
What are the key specifications of ATXMEGA64B3-MN that engineers should know?
The principal ATXMEGA64B3-MN specifications are a 32 MHz clock, up to 32 MIPS throughput, 64 KB of Flash, 4 KB of SRAM, 2 KB of EEPROM, and a 1.6 V to 3.6 V supply range. The manufacturer also identifies two DMA channels, four event-system channels, 36 general-purpose I/O lines, USB Full Speed Device support, and an LCD controller capable of driving up to 4 x 25 segments. These figures define the device's memory, connectivity, and real-time peripheral capability.
Where can I download the ATXMEGA64B3-MN datasheet PDF?
The ATXMEGA64B3-MN datasheet PDF is available from the Microchip document link listed on this page, at https://ww1.microchip.com/downloads/cn/DeviceDoc/cn598040.pdf. The document covers the ATxmega128B3 and ATxmega64B3 families, including memory organization, USB, DMA, event-system, LCD, electrical, and package characteristics. Use the pin-description and electrical-characteristics tables when assigning PCB nets and checking voltage, current, timing, and thermal limits.
Where can I find the ATXMEGA64B3-MN pinout?
The ATXMEGA64B3-MN pin assignments are found in the pin-description table and package drawing in the Microchip ATxmega64B3 datasheet. Because this device uses a 64-pin QFN with an exposed pad, the exposed thermal pad must be identified separately from ordinary signal pins. Before routing a board, verify every pin number, power-supply connection, ground connection, and exposed-pad connection directly against the manufacturer datasheet.
Can the ATXMEGA64B3-MN control a segmented LCD?
Yes. The ATXMEGA64B3-MN includes an LCD controller capable of driving up to 4 x 25 segments, as stated on the Microchip ATxmega64B3 product page. This makes it suitable for compact numeric or alphanumeric instruments, control panels, and sensor interfaces that require a local display. The LCD voltage-generation requirements, segment mapping, frame rate, and bias configuration must be designed according to the manufacturer datasheet and the selected display.
Does the ATXMEGA64B3-MN support USB?
The ATXMEGA64B3-MN supports a USB Full Speed Device interface. This interface allows the microcontroller to implement USB-connected control, data-acquisition, configuration, or human-interface functions without a separate USB controller. A compliant implementation must account for USB impedance-controlled traces, power supervision, pull-up placement, firmware support, and the electrical requirements in the manufacturer datasheet.
Is the ATXMEGA64B3-MN suitable for industrial control applications?
The ATXMEGA64B3-MN is suitable for many industrial-control designs because it combines a 1.6 V to 3.6 V supply range, a listed maximum temperature of 105 °C, internal EEPROM, DMA, and a programmable event system. Its integrated USB and LCD capabilities can simplify connected instruments and operator panels. Final qualification also depends on the PCB materials, enclosure, power supply, environmental exposure, and the system-level reliability requirements.
What is the difference between ATXMEGA64B3-MN and ATXMEGA64B3-MU?
Both designations identify the ATxmega64B3 device in a 64-pin QFN package with an exposed pad, but the final packaging code normally indicates the shipping format. Such a change does not create a meaningful engineering alternative because the electrical device and footprint remain the same. Do not interchange these MPNs without confirming reel, tray, moisture-protection, labeling, and production-handling requirements with Microchip.
When should I choose the ATXMEGA64B3-MN over a smaller AVR microcontroller?
Choose the ATXMEGA64B3-MN when the design benefits from more than 32 KB of program memory, more SRAM or EEPROM, USB connectivity, DMA-assisted transfers, a hardware event system, or segmented-LCD control. Its 32 MHz maximum clock and up-to-32-MIPS throughput provide considerably more processing headroom than a basic 8-bit AVR. A smaller AVR may be preferable when the product needs only basic control and its lower memory and peripheral requirements are sufficient.
Is the ATXMEGA64B3-MN suitable for a USB-connected data-acquisition product?
Yes, the ATXMEGA64B3-MN is well suited to compact USB-connected data-acquisition equipment because it combines USB Full Speed Device support with 4 KB of SRAM, 2 KB of EEPROM, a two-channel DMA controller, and a four-channel event system. DMA can move data with reduced CPU overhead, while EEPROM can retain calibration or configuration information. Analog front-end design, sensor accuracy, sampling rate, and USB bus compliance require separate design work.
What is the best drop-in replacement for ATXMEGA64B3-MN?
A drop-in replacement must match the ATXMEGA64B3-MN's exact 64-pin QFN footprint, exposed-pad arrangement, pin functions, supply range, memory organization, clocking, and peripheral resources. No independently verified alternative meeting all of those requirements was identified for this page. Packaging-code variants are not recommended as engineering alternatives because they do not add functional differentiation; use the Request a Quote form when sourcing the exact MPN.
Can an ATXMEGA64A1 replace the ATXMEGA64B3-MN?
The ATXMEGA64A1 should not be treated as a drop-in replacement for the ATXMEGA64B3-MN without a complete pin, package, memory, and peripheral comparison. The ATXMEGA64A1 is a different ATxmega family variant, and the available information does not establish that its package and pin functions match the ATXMEGA64B3-MN's 64-pin QFN footprint. A board redesign or schematic review would be required.
What is a suitable Microchip alternative when the ATXMEGA64B3-MN is unavailable?
The correct Microchip alternative depends on whether availability, memory, USB, LCD, temperature, and package compatibility are mandatory. A part with only similar clock speed is not a drop-in replacement. Use Microchip's cross-reference search to compare candidate devices, then review each candidate's package drawing, pin table, memory map, interrupt system, and peripheral resources against the existing ATXMEGA64B3-MN design.
How should the ATXMEGA64B3-MN exposed pad be connected?
The ATXMEGA64B3-MN exposed pad should be connected according to the manufacturer package and land-pattern guidance, including the required electrical connection to ground or another specified network and the recommended thermal-via arrangement. The pad is not an optional mechanical feature. Follow the datasheet's package drawing and PCB guidelines to preserve heat transfer and confirm that the selected land pattern matches the 64-pin QFN footprint.
Where can I buy ATXMEGA64B3-MN and what is its price?
Use the Request a Quote form on this page to request current ATXMEGA64B3-MN pricing, stock, minimum order quantity, and lead time. Quote requests can be matched to the exact 64-pin QFN MPN and required shipping format, reducing the risk of ordering a similar but non-compatible package variant. Pricing and availability change with supplier conditions and order quantity, so the form provides the current commercial answer for this exact device.
What is the lead time and stock status for ATXMEGA64B3-MN?
Use the Request a Quote form on this page for the current ATXMEGA64B3-MN stock position, lead time, minimum order quantity, and reel or tray requirements. The exact MPN is ATXMEGA64B3-MN, and its 64-pin QFN package with exposed pad must not be substituted with another footprint without engineering review. Current supply status should be confirmed before committing the production schedule or purchase order.

بيانات مرجعية هندسية لـ ATXMEGA64B3-MN — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the ATXMEGA64B3-MN when a compact system needs USB Full Speed Device connectivity, as much as 4 x 25 segments of LCD control, substantial internal memory, or event-driven data movement. Its 64 KB Flash, 4 KB SRAM, 2 KB EEPROM, two DMA channels, four event-system channels, and up-to-32-MIPS performance make it appropriate for connected instruments, segmented-display products, sensor hubs, and field-updatable controllers. A basic 8-bit AVR is preferable when the application only requires simple control and does not benefit from USB, DMA, event routing, or the larger XMEGA memory architecture. An ATXMEGA64A1 or another family member should not be treated as a direct replacement without checking the exact package, pin assignments, memory map, USB implementation, LCD resources, and clock requirements. For a true drop-in substitution, the candidate must preserve the 64-pin QFN footprint and exposed-pad behavior as well as the electrical and peripheral functions used by the existing firmware.

المقارنة مع البدائل

المعامل هذا المنتج
Package 64-pin QFN with exposed pad
Brand Microchip Technology
Maximum Clock Frequency 32 MHz
Maximum Throughput 32 MIPS
Flash Program Memory 64 KB
SRAM 4 KB
EEPROM 2 KB
Supply Voltage Range 1.6 V to 3.6 V
USB Interface USB Full Speed Device
LCD Controller Up to 4 x 25 segments
DMA Controller 2 channels
Event System 4 channels

أبرز الفروقات

  • Substantially greater performance than a basic 8-bit AVR (مقابلBasic 8-bit AVR microcontrollers)
  • Integrated connectivity and display control reduce external components (مقابلATxmega64A1)
  • Event-driven data movement reduces processor intervention (مقابلATxmega64A1)

ملاحظات التصميم

Use the manufacturer QFN land pattern and place thermal vias within or immediately beneath the exposed-pad region according to the package guidelines. Keep the exposed-pad connection and via arrangement consistent with the recommended stack-up because this path carries both ground return current and heat. Confirm pin-one orientation against the package drawing before routing power, USB, reset, and programming signals; reversing the package or confusing the exposed pad with a normal pin can prevent programming or cause a short.

Route USB D+ and D- as a short, tightly coupled pair with a continuous reference plane and manufacturer-recommended impedance. Avoid vias where practical, minimize stubs, and keep switching nodes and high-current paths away from the interface. If the board includes USB-to-serial circuitry, clock sources, or analog inputs, review their return-current paths as well. Compliance testing should use the final cable, connector, enclosure, and power configuration rather than a shortened test fixture.

Decouple each supply pin with local high-frequency ceramic capacitance and bulk capacitance placed according to the manufacturer's application guidance. The ATXMEGA64B3-MN operates from 1.6 V to 3.6 V, so verify startup behavior, voltage ramps, peripheral supply compatibility, and the point at which each subsystem becomes valid. For USB-powered systems, account for bus-supply tolerances, inrush, brownout behavior, and the current available when the system transitions from suspend to active operation.

Do not treat the ATXMEGA64B3-MN as a generic 8-bit MCU when planning firmware: its 32-bit-capable AVR architecture, 64 KB memory map, DMA channels, event system, and USB peripheral require the appropriate XMEGA device definitions and startup configuration. Preserve the boot-code section when programming the application area, and do not use the 2 KB EEPROM for high-frequency logging without an endurance plan. Validate interrupt priorities and DMA ownership early because those interactions affect deterministic control behavior.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer product information identifies the ATXMEGA64B3-MN as RoHS compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly established.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

ATXMEGA64B3-MN datasheet ATXMEGA64B3-MN specifications ATXMEGA64B3-MN pinout ATXMEGA64B3-MN datasheet pdf ATXMEGA64B3-MN equivalent ATXMEGA64B3-MN replacement ATXMEGA64B3-MN price ATXMEGA64B3-MN stock Microchip ATXMEGA64B3-MN ATXMEGA64B3-MN 64-QFN footprint ATXMEGA64B3-MN USB application circuit ATXMEGA64B3-MN LCD controller ATXMEGA64B3-MN vs ATXMEGA64A1

المكونات والمصطلحات ذات الصلة

Microchip Technology ATXMEGA64B3-MN ATxmega64B3 ATxmega B3 AVR 8/16-bit microcontroller RISC microcontroller embedded microcontroller semiconductor self-programming Flash read-while-write SRAM EEPROM USB Full Speed Device DMA controller event system segmented LCD controller 32 MIPS 32 MHz 64-pin QFN QFN family surface-mount package SMD package boot-code section general-purpose I/O
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر