ATXMEGA64B3-MN 32MHz 64KB AVR Microcontroller | Microchip
Teilenummer: ATXMEGA64B3-MN ✓ AktivATXMEGA64B3-MN Übersicht
An 8/16-bit AVR microcontroller combines a RISC processor core, embedded Flash program memory, SRAM, EEPROM, and dedicated peripherals on one integrated circuit. These devices occupy the microcontroller level of the embedded-computing hierarchy and can provide a compact, low-power control platform for consumer equipment, industrial products, communications equipment, and human-interface devices. The ATxmega B3 family supports both standalone USB connectivity and segmented LCD control in the same device.
The ATXMEGA64B3-MN provides 64 KB of self-programming Flash with read-while-write capability, including a dedicated 4 KB boot-code section. Its 4 KB SRAM supports working data, while 2 KB of internal EEPROM provides nonvolatile storage without an external memory component. The two-channel DMA controller and four-channel event system can transfer data and route events between peripherals, reducing processor intervention in timing-sensitive designs.
The USB full-speed device interface supports direct USB connectivity, while the integrated LCD controller can drive up to four by 25 segments. The processor supports up to 32 MIPS at 32 MHz, giving it substantially more performance headroom than a conventional 8-bit AVR device while retaining the familiar AVR instruction set and peripheral ecosystem. Thirty-six general-purpose I/O lines are identified for the ATxmega64B3 family in the manufacturer documentation.
Typical uses include USB-connected human-interface devices, segmented display controllers, industrial control panels, compact data-acquisition equipment, and embedded accessories that need local data storage. The boot-code section can support controlled startup or firmware-update workflows, while internal EEPROM is useful for calibration values, configuration data, and counters that must survive power cycles.
Design with the 1.6 V to 3.6 V operating range in mind, particularly when using USB-powered equipment. The 64-pin QFN package requires careful PCB layout, adequate thermal-via placement beneath the exposed pad, and attention to high-speed USB routing. The listed 105°C maximum temperature identifies the device as suitable for demanding industrial-temperature designs when the complete system and board materials support that range.
This product page combines the manufacturer's core device characteristics with application guidance, package considerations, sourcing information, and an explicit assessment of drop-in replacement availability. Because pin-compatible alternatives must match the exact QFN footprint and electrical behavior, no substitute is presented unless its compatibility can be substantiated.
Drop-in-Alternativen für ATXMEGA64B3-MN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernATXMEGA64B3-MN Grenzwerte & elektrische Eigenschaften
| Product Type | 8/16-bit AVR microcontroller |
| Series | ATxmega B3 |
| Maximale Taktfrequenz | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Program Memory | 64 KB |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| Program Memory Type | Self-programming Flash with read-while-write |
| DMA Controller | 2 channels |
| Event System | 4 channels |
| USB Interface | USB Full Speed Device |
| LCD Controller | Up to 4 x 25 segments |
| General-Purpose I/O | 36 lines |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Maximum Temperature | 105 °C |
| Gehäuse | 64-pin QFN with exposed pad |
| Montageart | Surface mount |
| RoHS-Status | RoHS listed by the manufacturer |
ATXMEGA64B3-MN 64-pin qfn with exposed pad Pinbelegungsleitfaden
Pinbelegung für ATXMEGA64B3-MN (64-pin qfn with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für ATXMEGA64B3-MN.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ATXMEGA64B3-MN ist geeignet für 6 Anwendungs: USB Human-Interface Devices, Segmented LCD Instrument Panels, Industrial Data Acquisition, Bootloader and Field-Updatable Products, Connected Sensor Hubs, Low-Power Embedded Control.
USB Human-Interface Devices
The ATXMEGA64B3-MN fits USB-connected keyboards, control pads, and configuration interfaces because it combines a USB Full Speed Device controller with up to 32 MIPS of processing performance. Its 4 KB SRAM supports protocol buffering and interface state, while the two-channel DMA controller can transfer data with less processor involvement. The 1.6 V to 3.6 V operating range also permits integration into compact USB-powered products. Design the USB traces as a controlled-impedance interface, provide the required bus-disconnect and power-management behavior, and route sensitive analog or reference circuitry away from high-current switching nodes.
Empfohlen
Segmented LCD Instrument Panels
The integrated LCD controller makes the ATXMEGA64B3-MN appropriate for numerical meters, laboratory panels, and compact process displays with up to 4 x 25 segments. Its 64 KB Flash provides room for application firmware, graphics, menu logic, and communication protocols, while the four-channel event system can coordinate display updates with external activity. At a 32 MHz maximum clock, the device can maintain responsive controls and measurement handling. Select the display according to the controller’s voltage and bias requirements, and validate contrast, segment drive, update timing, and temperature performance across the intended operating range.
Empfohlen
Industrial Data Acquisition
The ATXMEGA64B3-MN supports compact data-acquisition modules that need local buffering, removable configuration, and fast host connectivity. Four KB of SRAM can hold working samples and protocol buffers, while the two-channel DMA controller can move peripheral data without tying the CPU to every transfer. Its listed 105 °C maximum temperature is useful for industrial-temperature designs, although enclosure temperature and PCB reliability must also be considered. The USB Full Speed Device interface can connect the module to a host for configuration and export, while EEPROM can preserve calibration constants between power cycles.
Empfohlen
Bootloader and Field-Updatable Products
The 4 KB boot-code section in the ATXMEGA64B3-MN supports a protected startup routine that can validate an application image before transferring control to the 64 KB Flash program area. Read-while-write operation and 2 KB of EEPROM add useful options for update state, device configuration, and production information. A robust design should include image validation, controlled rollback behavior, write endurance management, and a recovery path. The available supply range and low-power microcontroller architecture suit battery-operated accessories and compact embedded controllers where update reliability is important.
Empfohlen
Connected Sensor Hubs
The ATXMEGA64B3-MN can act as the local controller in a sensor hub that combines sampling, event handling, local storage, and USB communication. The four-channel event system is useful for timestamping or routing peripheral events, while DMA supports background transfers and reduces processor load. Its 2 KB EEPROM can hold sensor offsets, device identifiers, and configuration records, and 4 KB of SRAM provides a practical working area. Keep analog inputs on a controlled layout, observe signal-integrity requirements near the QFN pins, and confirm the device’s operating limits against the enclosure and sensor environment.
Empfohlen
Low-Power Embedded Control
The ATXMEGA64B3-MN fits compact embedded controllers that need more memory and event-driven peripherals than a basic 8-bit AVR while retaining the AVR software ecosystem. Internal Flash, SRAM, EEPROM, DMA, and the event system can reduce the need for external memory and discrete support components. Its 1.6 V to 3.6 V supply range allows direct integration into multi-voltage systems when the downstream loads and peripherals use compatible levels. Power modes, sleep-entry conditions, peripheral clocks, and load behavior should be evaluated together to determine battery life rather than relying on active-processing performance alone.
Empfohlen
Technische Referenzdaten für ATXMEGA64B3-MN – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Package | 64-pin QFN with exposed pad |
| Brand | Microchip Technology |
| Maximum Clock Frequency | 32 MHz |
| Maximum Throughput | 32 MIPS |
| Flash Program Memory | 64 KB |
| SRAM | 4 KB |
| EEPROM | 2 KB |
| Supply Voltage Range | 1.6 V to 3.6 V |
| USB Interface | USB Full Speed Device |
| LCD Controller | Up to 4 x 25 segments |
| DMA Controller | 2 channels |
| Event System | 4 channels |
Wichtigste Unterscheidungsmerkmale
- Substantially greater performance than a basic 8-bit AVR (vs. Basic 8-bit AVR microcontrollers)
- Integrated connectivity and display control reduce external components (vs. ATxmega64A1)
- Event-driven data movement reduces processor intervention (vs. ATxmega64A1)
Designhinweise
Use the manufacturer QFN land pattern and place thermal vias within or immediately beneath the exposed-pad region according to the package guidelines. Keep the exposed-pad connection and via arrangement consistent with the recommended stack-up because this path carries both ground return current and heat. Confirm pin-one orientation against the package drawing before routing power, USB, reset, and programming signals; reversing the package or confusing the exposed pad with a normal pin can prevent programming or cause a short.
Route USB D+ and D- as a short, tightly coupled pair with a continuous reference plane and manufacturer-recommended impedance. Avoid vias where practical, minimize stubs, and keep switching nodes and high-current paths away from the interface. If the board includes USB-to-serial circuitry, clock sources, or analog inputs, review their return-current paths as well. Compliance testing should use the final cable, connector, enclosure, and power configuration rather than a shortened test fixture.
Decouple each supply pin with local high-frequency ceramic capacitance and bulk capacitance placed according to the manufacturer's application guidance. The ATXMEGA64B3-MN operates from 1.6 V to 3.6 V, so verify startup behavior, voltage ramps, peripheral supply compatibility, and the point at which each subsystem becomes valid. For USB-powered systems, account for bus-supply tolerances, inrush, brownout behavior, and the current available when the system transitions from suspend to active operation.
Do not treat the ATXMEGA64B3-MN as a generic 8-bit MCU when planning firmware: its 32-bit-capable AVR architecture, 64 KB memory map, DMA channels, event system, and USB peripheral require the appropriate XMEGA device definitions and startup configuration. Preserve the boot-code section when programming the application area, and do not use the 2 KB EEPROM for high-frequency logging without an endurance plan. Validate interrupt priorities and DMA ownership early because those interactions affect deterministic control behavior.
Compliance-Informationen
The manufacturer product information identifies the ATXMEGA64B3-MN as RoHS compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly established.