BCM5221A4IMLG - Single-Port RMII Ethernet PHY | Broadcom
MPN: BCM5221A4IMLG ✓ نشطBCM5221A4IMLG نظرة عامة
An Ethernet PHY is an interface integrated circuit that converts between physical network signals and digital data. It is a member of the broader Ethernet interface hierarchy, which includes controllers, transceivers, magnetics, connectors, and network processors. RMII is the Reduced Media Independent Interface used to connect the PHY to a digital Ethernet controller. This separation allows the PHY to handle the physical network layer while the controller manages higher-level frame processing and traffic control.
The BCM5221A4IMLG is identified as a single-PHY RMII Ethernet device. Its ordering code, BCM5221A4IMLG, retains the broader BCM5221 family designation while distinguishing the A4I variant and MLG package identifier. This makes the exact suffix important during procurement and PCB design. The manufacturer’s BCM5221 product brief is the primary document for confirming the final electrical limits, temperature range, media interfaces, register behavior, and recommended application circuit before production release.
As a single-port Ethernet transceiver, the device is suitable for embedded equipment, industrial controllers, set-top equipment, printers, network appliances, and other embedded platforms that use an RMII-connected Ethernet controller. A typical implementation places the BCM5221A4IMLG between the controller and the network magnetics or line-driver interface, while a 10/100 Ethernet magnetics component connects the PHY to the physical cable path. RMII reduces the number of parallel data lines relative to older MII arrangements, making it useful where board routing and connector density are important.
The exact Ethernet speed support, internal and external crystal requirements, supply voltages, bias-resistor configuration, register map, and thermal limits must be taken from the BCM5221 product brief because those values are not identified by the distributor title alone. Engineers should also confirm the relationship between RMII clocking, PHY reset timing, strap resistors, and the selected network magnetics. Those details determine whether the controller interface operates reliably at power-up.
A practical design priority is to preserve the manufacturer’s recommended power, decoupling, clock, and analog-network layout. RMII signals are digital, but the PHY still contains sensitive communication circuitry, so return paths, ground continuity, and isolation between digital and network-side return currents can affect signal integrity. Use the pin-description table and reference circuit in the BCM5221 product brief when assigning tracks and selecting external components.
This page organizes the verified ordering information, interface classification, replacement candidate, application guidance, and design considerations into one engineering-focused reference. It also distinguishes the BCM5221A4IMLG from the closely related BCM5221A4KMLG ordering code, helping designers confirm package and suffix requirements without treating related family members as interchangeable without a complete review.
بدائل مباشرة لـ BCM5221A4IMLG — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع BCM5221A4IMLG (نفس عامل الشكل والبصمة) — يختلف في Product Type.
BCM5221A4KMLG
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←BCM5221A4IMLG الحدود القصوى والخصائص الكهربائية
| Product Type | Single-port Ethernet PHY transceiver |
| Controller Interface | RMII |
| Ethernet Port Count | 1 port |
| Product Family | BCM5221 |
| Manufacturer | Broadcom Limited |
| Ordering Code | BCM5221A4IMLG |
| Package Identifier | MLG |
| نوع التركيب | Surface mount |
دليل تكوين أطراف BCM5221A4IMLG mlg
تكوين الأطراف لـ BCM5221A4IMLG (حزمة mlg). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ BCM5221A4IMLG.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
BCM5221A4IMLG مناسب لـ 6 التطبيقs: Industrial Ethernet Controller Interface, Set-Top and Network Appliance Ethernet, Embedded Printer Ethernet Connectivity, IoT Gateway Ethernet Uplink, Automated Test and Measurement Equipment, Camera and Security Network Interface.
Industrial Ethernet Controller Interface
BCM5221A4IMLG fits an embedded industrial controller that requires one physical Ethernet connection and a digital host interface. The part is identified as a single-port PHY transceiver with RMII, allowing it to sit between the Ethernet controller and the network-side interface circuitry. This arrangement separates media signaling from frame processing and reduces the number of parallel signals required by the controller connection. Engineers should use the Broadcom BCM5221 product brief to confirm clocking, reset, supply, and reference-circuit requirements before layout release.
موصى به
Set-Top and Network Appliance Ethernet
BCM5221A4IMLG can provide the physical-layer function in a set-top box or compact network appliance with one Ethernet port. Its RMII interface supports connection to a digital network controller while the PHY handles the physical network-side role. The single-port organization is appropriate for products that do not require multiple integrated copper PHYs. Use the manufacturer application circuit and pin-description table to establish component placement, clock distribution, reset sequencing, and the connection to external network magnetics.
موصى به
Embedded Printer Ethernet Connectivity
BCM5221A4IMLG is suitable for adding one wired Ethernet connection to an embedded printer controller. The host controller can communicate through RMII while the BCM5221 supplies the physical-layer transceiver function required by the Ethernet connection. This separation supports modular firmware architectures in which networking is handled separately from print-engine control. The designer should verify the required PHY rate, magnetics selection, reference clock source, and startup behavior against the Broadcom BCM5221 product brief.
موصى به
IoT Gateway Ethernet Uplink
BCM5221A4IMLG can serve as the wired Ethernet physical interface for an IoT gateway that couples embedded processing to a local network. The RMII connection provides a defined digital boundary between the PHY and gateway controller, while the single-port configuration avoids unnecessary PHY integration for a basic uplink. Placement near the external magnetics and controlled return paths can reduce susceptibility to network-side noise. Confirm supply sequencing and RMII timing using the manufacturer’s BCM5221 documentation.
موصى به
Automated Test and Measurement Equipment
BCM5221A4IMLG is applicable to test and measurement equipment that needs a single Ethernet management or communication port. RMII provides a compact digital interface between the instrument controller and the Ethernet physical layer, while the PHY handles the network-facing role. The exact data-rate and clocking configuration must be selected from the BCM5221 product brief because the distributor classification alone does not define them. Controlled grounding and isolation from noisy analog or switching circuitry are central to a reliable implementation.
موصى به
Camera and Security Network Interface
BCM5221A4IMLG can support a one-port Ethernet connection in a camera or security appliance when its controller uses RMII. The PHY separates physical network signaling from the video or control processor, allowing the host processor to concentrate on image processing and system management. Placement and return-path design should keep the Ethernet network side physically separated from high-speed digital circuitry. Confirm the supported media rate, interface clock, reset timing, and external magnetic-device configuration in the Broadcom BCM5221 product brief.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ BCM5221A4IMLG — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | BCM5221A4KMLG |
|---|---|---|
| Brand | Broadcom | Broadcom |
| Package | MLG | MLG - same package code |
| Product Family | BCM5221 | BCM5221 - same family |
| Ethernet PHY Port Count | 1 port | 1 port |
| Controller Interface | RMII | RMII |
| Ordering-Code Difference | A4I | A4K |
| Functional Match | 100% at verified family and package-code level | 100% at verified family and package-code level |
أبرز الفروقات
- Exact A4I ordering configuration (مقابلBCM5221A4KMLG)
- Shared RMII controller interface (مقابلBCM5221A4KMLG)
- Shared single-port Ethernet architecture (مقابلBCM5221A4KMLG)
ملاحظات التصميم
Use the pin-description table and reference layout in the Broadcom BCM5221 product brief when assigning tracks. Keep the RMII route short and continuous, provide the manufacturer-recommended clock distribution, and place required decoupling components close to their associated pins. Do not infer a footprint solely from the MLG identifier; confirm land pattern, pin numbering, exposed-pad treatment, and thermal requirements against the final package drawing before fabrication.
Separate the RMII side from the network-side return currents and preserve a continuous ground reference beneath the PHY and its supporting components. Network magnetics, clock circuitry, and the PHY should be arranged according to the manufacturer reference circuit so switching or magnetics-related return currents do not pass beneath sensitive digital traces. Validate interface timing with the selected controller, clock source, reset sequence, and operating conditions before production release.
Do not treat BCM5221A4IMLG and BCM5221A4KMLG as unconditional equivalents. The A4I and A4K grade codes differ, and the suffix selection can carry temperature, qualification, marking, or lifecycle meaning even though both devices share the BCM5221 family, MLG package code, one-port configuration, and RMII interface. Check the exact ordering table, operating limits, and production requirements in the Broadcom BCM5221 product brief.
معلومات الامتثال
Compliance status for the exact BCM5221A4IMLG ordering code was not identified and must be confirmed through Broadcom product documentation or the manufacturer’s compliance records.