Broadcom

BCM5221A4IMLG - Single-Port RMII Ethernet PHY | Broadcom

MPN: BCM5221A4IMLG ✓ פעיל
MLG Package
כמות הזמנה מינימלית: 1 |

BCM5221A4IMLG סקירה

Broadcom BCM5221A4IMLG is a single-port Ethernet physical-layer transceiver with an RMII interface, supplied with the MLG package code. It is intended for systems that require an Ethernet PHY connection to a digital controller or processor. The part belongs to the Interface ICs category and operates as part of the physical layer in an Ethernet communication chain, where it interfaces network media signals with a digital MAC-side bus.

An Ethernet PHY is an interface integrated circuit that converts between physical network signals and digital data. It is a member of the broader Ethernet interface hierarchy, which includes controllers, transceivers, magnetics, connectors, and network processors. RMII is the Reduced Media Independent Interface used to connect the PHY to a digital Ethernet controller. This separation allows the PHY to handle the physical network layer while the controller manages higher-level frame processing and traffic control.

The BCM5221A4IMLG is identified as a single-PHY RMII Ethernet device. Its ordering code, BCM5221A4IMLG, retains the broader BCM5221 family designation while distinguishing the A4I variant and MLG package identifier. This makes the exact suffix important during procurement and PCB design. The manufacturer’s BCM5221 product brief is the primary document for confirming the final electrical limits, temperature range, media interfaces, register behavior, and recommended application circuit before production release.

As a single-port Ethernet transceiver, the device is suitable for embedded equipment, industrial controllers, set-top equipment, printers, network appliances, and other embedded platforms that use an RMII-connected Ethernet controller. A typical implementation places the BCM5221A4IMLG between the controller and the network magnetics or line-driver interface, while a 10/100 Ethernet magnetics component connects the PHY to the physical cable path. RMII reduces the number of parallel data lines relative to older MII arrangements, making it useful where board routing and connector density are important.

The exact Ethernet speed support, internal and external crystal requirements, supply voltages, bias-resistor configuration, register map, and thermal limits must be taken from the BCM5221 product brief because those values are not identified by the distributor title alone. Engineers should also confirm the relationship between RMII clocking, PHY reset timing, strap resistors, and the selected network magnetics. Those details determine whether the controller interface operates reliably at power-up.

A practical design priority is to preserve the manufacturer’s recommended power, decoupling, clock, and analog-network layout. RMII signals are digital, but the PHY still contains sensitive communication circuitry, so return paths, ground continuity, and isolation between digital and network-side return currents can affect signal integrity. Use the pin-description table and reference circuit in the BCM5221 product brief when assigning tracks and selecting external components.

This page organizes the verified ordering information, interface classification, replacement candidate, application guidance, and design considerations into one engineering-focused reference. It also distinguishes the BCM5221A4IMLG from the closely related BCM5221A4KMLG ordering code, helping designers confirm package and suffix requirements without treating related family members as interchangeable without a complete review.

חלופות תחליף ישיר עבור BCM5221A4IMLG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם BCM5221A4IMLG (אותו גורם צורה וטביעת רגל) — שונים ב Product Type.

Broadcom
Product Type: Single-port Ethernet physical-layer transceiver
השווה עם BCM5221A4IMLG →

BCM5221A4KMLG

✅ Drop-In
Broadcom
📦 MLG
Single-port Ethernet physical-layer transceiver · 10 Mbps or 100 Mbps · 1 driver / 1 receiver · 2.5 V to 3.3 V · 175 mW · -40°C to +85°C · 48-pin QFN · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

BCM5221A4IMLG דירוגים מרביים ומאפיינים חשמליים

Product Type Single-port Ethernet PHY transceiver
Controller Interface RMII
Ethernet Port Count 1 port
Product Family BCM5221
Manufacturer Broadcom Limited
Ordering Code BCM5221A4IMLG
Package Identifier MLG
סוג הרכבה Surface mount

מדריך תצורת פינים של BCM5221A4IMLG mlg

תצורת פינים עבור BCM5221A4IMLG (מארזת mlg). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת mlg עבור BCM5221A4IMLG

אין נתוני פריסת פינים מפורטים עבור BCM5221A4IMLG.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

BCM5221A4IMLG מתאים עבור 6 יישוםs: Industrial Ethernet Controller Interface, Set-Top and Network Appliance Ethernet, Embedded Printer Ethernet Connectivity, IoT Gateway Ethernet Uplink, Automated Test and Measurement Equipment, Camera and Security Network Interface.

🏭

Industrial Ethernet Controller Interface

BCM5221A4IMLG fits an embedded industrial controller that requires one physical Ethernet connection and a digital host interface. The part is identified as a single-port PHY transceiver with RMII, allowing it to sit between the Ethernet controller and the network-side interface circuitry. This arrangement separates media signaling from frame processing and reduces the number of parallel signals required by the controller connection. Engineers should use the Broadcom BCM5221 product brief to confirm clocking, reset, supply, and reference-circuit requirements before layout release.

🌐

Set-Top and Network Appliance Ethernet

BCM5221A4IMLG can provide the physical-layer function in a set-top box or compact network appliance with one Ethernet port. Its RMII interface supports connection to a digital network controller while the PHY handles the physical network-side role. The single-port organization is appropriate for products that do not require multiple integrated copper PHYs. Use the manufacturer application circuit and pin-description table to establish component placement, clock distribution, reset sequencing, and the connection to external network magnetics.

🖥️

Embedded Printer Ethernet Connectivity

BCM5221A4IMLG is suitable for adding one wired Ethernet connection to an embedded printer controller. The host controller can communicate through RMII while the BCM5221 supplies the physical-layer transceiver function required by the Ethernet connection. This separation supports modular firmware architectures in which networking is handled separately from print-engine control. The designer should verify the required PHY rate, magnetics selection, reference clock source, and startup behavior against the Broadcom BCM5221 product brief.

🧩

IoT Gateway Ethernet Uplink

BCM5221A4IMLG can serve as the wired Ethernet physical interface for an IoT gateway that couples embedded processing to a local network. The RMII connection provides a defined digital boundary between the PHY and gateway controller, while the single-port configuration avoids unnecessary PHY integration for a basic uplink. Placement near the external magnetics and controlled return paths can reduce susceptibility to network-side noise. Confirm supply sequencing and RMII timing using the manufacturer’s BCM5221 documentation.

🔧

Automated Test and Measurement Equipment

BCM5221A4IMLG is applicable to test and measurement equipment that needs a single Ethernet management or communication port. RMII provides a compact digital interface between the instrument controller and the Ethernet physical layer, while the PHY handles the network-facing role. The exact data-rate and clocking configuration must be selected from the BCM5221 product brief because the distributor classification alone does not define them. Controlled grounding and isolation from noisy analog or switching circuitry are central to a reliable implementation.

🎥

Camera and Security Network Interface

BCM5221A4IMLG can support a one-port Ethernet connection in a camera or security appliance when its controller uses RMII. The PHY separates physical network signaling from the video or control processor, allowing the host processor to concentrate on image processing and system management. Placement and return-path design should keep the Ethernet network side physically separated from high-speed digital circuitry. Confirm the supported media rate, interface clock, reset timing, and external magnetic-device configuration in the Broadcom BCM5221 product brief.

What is BCM5221A4IMLG?
BCM5221A4IMLG is a Broadcom single-port Ethernet physical-layer transceiver with an RMII controller interface. It is part of the BCM5221 interface family and is intended to connect a digital Ethernet controller to physical network circuitry. According to the Broadcom BCM5221 product brief, the product brief identifies the BCM5221 family, while the exact BCM5221A4IMLG ordering suffix distinguishes the selected device configuration and MLG package code.
Where can I download the BCM5221A4IMLG datasheet?
The BCM5221A4IMLG product brief is available through the BCM5221 family document linked on this page. The document is the appropriate starting point for the device’s application diagram, pin descriptions, electrical characteristics, register information, and recommended external components. Engineers should use the A4IMLG ordering code when checking device-specific ordering information, because BCM5221A4KMLG is a related but distinct ordering code shown in the Broadcom BCM5221 documentation.
What interface does BCM5221A4IMLG use?
BCM5221A4IMLG uses the RMII interface for communication with the Ethernet controller. RMII provides a parallel digital connection between the PHY and the controller while leaving the physical network signaling to the PHY and its external network interface. According to the Broadcom BCM5221 product brief, the BCM5221 is a single-PHY RMII Ethernet device, making the RMII timing and clock requirements central to PCB-level integration.
Is BCM5221A4IMLG a single-port or multi-port Ethernet PHY?
BCM5221A4IMLG is a single-port Ethernet PHY transceiver. Its single-PHY configuration is suitable for embedded equipment that needs one network port and an RMII connection to a host controller. According to the Broadcom BCM5221 product brief and the manufacturer’s product classification, BCM5221 belongs to the Ethernet transceiver family and uses the RMII interface for its controller-side connection.
Can BCM5221A4KMLG replace BCM5221A4IMLG?
BCM5221A4KMLG is the closest documented drop-in candidate for BCM5221A4IMLG because both are BCM5221 single-PHY RMII devices with the MLG package code. The verified cross-reference identifies 100% key-parameter proximity at the family and ordering-code level. Before substitution, confirm the A4I versus A4K grade code, temperature rating, pin configuration, and production requirements against the Broadcom BCM5221 product brief.
What is the best Broadcom replacement for BCM5221A4IMLG?
BCM5221A4KMLG is the best documented Broadcom-family candidate for BCM5221A4IMLG because it retains the BCM5221 single-port RMII function and MLG package identifier. The functional match is 100% at the stated family level, but the A4I and A4K ordering codes must be checked for qualification differences. The Broadcom BCM5221 product brief is the controlling source for the final temperature, marking, and configuration requirements.
BCM5221A4IMLG vs BCM5221A4KMLG: which is better?
BCM5221A4IMLG and BCM5221A4KMLG share the same BCM5221 single-port RMII Ethernet classification and MLG package code, so they have a 100% functional match in the documented cross-reference. Choose BCM5221A4IMLG when its A4I ordering code matches the required production specification. Choose BCM5221A4KMLG only after confirming that the A4K grade satisfies the temperature, qualification, and lifecycle requirements for the finished equipment.
When should I choose BCM5221A4IMLG instead of BCM5221A4KMLG?
Choose BCM5221A4IMLG when the A4I suffix is the manufacturer-approved configuration for the product’s operating environment and production requirements. Both candidates provide one Ethernet port and an RMII controller interface, so functional media support alone does not distinguish them. According to the Broadcom BCM5221 product brief, the complete ordering code and grade information should be checked before either part is released for procurement.
Is BCM5221A4IMLG suitable for an RMII Ethernet controller?
BCM5221A4IMLG is suitable for a system that uses one RMII Ethernet port and requires a separate Ethernet PHY function. The part is specifically identified as a single-PHY RMII transceiver. According to the Broadcom BCM5221 product brief, system integration should account for the required reference clock, reset behavior, supply arrangement, external magnetics or line interface, and RMII signal timing.
Where to buy BCM5221A4IMLG online?
BCM5221A4IMLG can be requested through the Request a Quote form on this page. The form accepts the exact ordering code BCM5221A4IMLG, helping procurement confirm package code, production quantity, and current sourcing conditions without substituting a related BCM5221 suffix. The Broadcom BCM5221 product brief should be attached to the request when the buyer needs confirmation of configuration or qualification requirements.
What is the price of BCM5221A4IMLG?
Use the Request a Quote form on this page for the current unit price and volume basis of BCM5221A4IMLG. Because the exact A4I suffix and MLG package code control the orderable configuration, a generic BCM5221 price may not represent the correct device. The request should specify BCM5221A4IMLG exactly and include the required quantity, delivery location, and target schedule.
What is the lead time and stock status of BCM5221A4IMLG?
Request the current stock position, minimum order quantity, and lead time for BCM5221A4IMLG through the Request a Quote form on this page. The exact BCM5221A4IMLG ordering code should be included in the inquiry so the response applies to the A4I grade and MLG package rather than a related family member. The Broadcom BCM5221 product brief remains the reference for the component’s configuration.
What are the key specifications engineers should know about BCM5221A4IMLG?
BCM5221A4IMLG is a Broadcom single-port Ethernet PHY transceiver using RMII, with the MLG package identifier and the BCM5221A4IMLG ordering code. The verified manufacturer classification identifies one Ethernet PHY port and an RMII controller interface. Supply limits, Ethernet rates, temperature range, dimensions, clocking requirements, and qualification markings should be confirmed in the Broadcom BCM5221 product brief before schematic and PCB release.
How should BCM5221A4IMLG be placed near the Ethernet network interface?
Place BCM5221A4IMLG in accordance with the Broadcom BCM5221 product brief, keeping the RMII interface away from the network-side return currents and maintaining a continuous ground reference under the device. The exact trace geometry cannot be prescribed without the complete pin and layout information. Confirm the selected magnetics or line-driver component, grounding arrangement, and return-path design before releasing the layout.
What can replace BCM5221A4IMLG?
BCM5221A4KMLG is the documented same-family drop-in candidate for BCM5221A4IMLG. Both are single-port RMII Ethernet devices with the MLG package code, resulting in a 100% match for the verified functional parameters. The substitution still requires confirmation of the A4I versus A4K grade code and any temperature or qualification requirements. No additional cross-brand drop-in replacement was established by the verified cross-reference results.

נתוני עזר הנדסיים עבור BCM5221A4IMLG — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose BCM5221A4IMLG when the equipment specification calls for the A4I grade code and a single-port Broadcom Ethernet PHY with an RMII interface. It is appropriate for embedded products with one Ethernet connection, particularly where the controller uses RMII and the design follows the Broadcom BCM5221 reference circuit. BCM5221A4KMLG is the closest documented drop-in candidate because it retains the same BCM5221 family, one-port function, RMII interface, and MLG package code. Select it only after checking the A4K grade’s temperature, qualification, and lifecycle requirements. No cross-brand drop-in replacement was established by the verified cross-reference results, so an alternative from another manufacturer should not be assigned to the existing footprint without a separate manufacturer-confirmed compatibility study.

השוואה עם חלופות

פרמטר מוצר זה BCM5221A4KMLG
Brand Broadcom Broadcom
Package MLG MLG - same package code
Product Family BCM5221 BCM5221 - same family
Ethernet PHY Port Count 1 port 1 port
Controller Interface RMII RMII
Ordering-Code Difference A4I A4K
Functional Match 100% at verified family and package-code level 100% at verified family and package-code level

מבדילים עיקריים

  • Exact A4I ordering configuration (לעומתBCM5221A4KMLG)
  • Shared RMII controller interface (לעומתBCM5221A4KMLG)
  • Shared single-port Ethernet architecture (לעומתBCM5221A4KMLG)

הערות תכנון

Use the pin-description table and reference layout in the Broadcom BCM5221 product brief when assigning tracks. Keep the RMII route short and continuous, provide the manufacturer-recommended clock distribution, and place required decoupling components close to their associated pins. Do not infer a footprint solely from the MLG identifier; confirm land pattern, pin numbering, exposed-pad treatment, and thermal requirements against the final package drawing before fabrication.

Separate the RMII side from the network-side return currents and preserve a continuous ground reference beneath the PHY and its supporting components. Network magnetics, clock circuitry, and the PHY should be arranged according to the manufacturer reference circuit so switching or magnetics-related return currents do not pass beneath sensitive digital traces. Validate interface timing with the selected controller, clock source, reset sequence, and operating conditions before production release.

Do not treat BCM5221A4IMLG and BCM5221A4KMLG as unconditional equivalents. The A4I and A4K grade codes differ, and the suffix selection can carry temperature, qualification, marking, or lifecycle meaning even though both devices share the BCM5221 family, MLG package code, one-port configuration, and RMII interface. Check the exact ordering table, operating limits, and production requirements in the Broadcom BCM5221 product brief.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance status for the exact BCM5221A4IMLG ordering code was not identified and must be confirmed through Broadcom product documentation or the manufacturer’s compliance records.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

BCM5221A4IMLG datasheet BCM5221A4IMLG datasheet pdf BCM5221A4IMLG pinout BCM5221A4IMLG equivalent BCM5221A4IMLG replacement BCM5221A4IMLG vs BCM5221A4KMLG BCM5221A4IMLG cross reference BCM5221A4IMLG footprint BCM5221A4IMLG RMII PHY BCM5221A4IMLG price BCM5221A4IMLG stock Broadcom BCM5221A4IMLG BCM5221A4IMLG application circuit single port RMII Ethernet PHY

רכיבים ומונחים קשורים

Broadcom Broadcom Limited BCM5221A4IMLG BCM5221A4KMLG BCM5221 Ethernet PHY Ethernet transceiver single-port Ethernet RMII Reduced Media Independent Interface Interface IC network physical layer digital Ethernet controller Ethernet magnetics MLG package surface-mount semiconductor embedded networking industrial controller set-top equipment Ethernet management
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר