Broadcom

BCM5461A1KPFG - 10/100/1000BASE-T Ethernet | Broadcom

MPN: BCM5461A1KPFG ✓ نشط
48-pin QFN (KPFG) Package
الحد الأدنى للطلب: 1 |

BCM5461A1KPFG نظرة عامة

The Broadcom BCM5461A1KPFG is a single-port 10/100/1000BASE-T Ethernet controller and transceiver device for copper-based network connections. It combines support for 10 Mb/s, 100 Mb/s, and 1 Gb/s Ethernet operation in a 48-pin QFN package designated KPFG. The device is positioned for embedded networking, industrial communication, access equipment, and other systems that require a compact Gigabit Ethernet interface.

An Ethernet transceiver is the physical-layer component that connects a digital network processor or communications system to twisted-pair cabling. The PHY performs signal encoding and decoding, clock recovery, link negotiation, and electrical-interface functions required by 10/100/1000BASE-T. A device combining these capabilities simplifies board design by reducing the number of separate Ethernet components and associated high-speed routing requirements.

The BCM5461A1KPFG belongs to Broadcom's BCM5461 family of single-port Gigabit Ethernet devices. Its 10/100/1000BASE-T designation indicates automatic support for legacy 10 Mb/s and 100 Mb/s links as well as 1 Gb/s operation. That combination allows a product to interoperate with slower network equipment and copper cabling infrastructure while preserving a path to Gigabit throughput.

The KPFG package designation identifies the physical configuration used for this ordering code. In a completed Ethernet design, the device requires the appropriate power, decoupling, clock, magnetic-component, and signal-routing support for a compliant 10/100/1000BASE-T interface. Magnetics, termination networks, and board geometry are as important to link performance as the controller itself.

Typical implementation roles include industrial Ethernet gateways, embedded routers, network-interface modules, set-top equipment, printers, storage systems, and control panels. Automatic support for multiple speeds is useful in mixed environments where endpoint capabilities and switch ports may differ. The device is particularly relevant where a compact surface-mount footprint is preferred over a discrete PHY arrangement.

PCB implementation should prioritize short, impedance-controlled differential traces, careful separation between transmit and receive paths, and a quiet supply network. Place input and output decoupling capacitors close to their associated power pins, keep the Ethernet magnetics close to the transceiver, and follow the manufacturer's recommended reference layout. This page organizes the confirmed device identity, sourcing information, comparison candidates, and design considerations into a practical engineering reference.

بدائل مباشرة لـ BCM5461A1KPFG — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

BCM5461SA1KPFG

✅ بديل مباشر
📦 48-pin QFN (KPFG)
Retains the 48-pin footprint and 10/100/1000BASE-T rate class, a 0% difference in those two package and interface criteria; detailed feature deltas require manufacturer-datasheet review

📋 بديل مرجعي (غير موجود في الكتالوج)

BCM54180B0IFBG

✅ بديل مباشر
📦 48-pin QFN
Retains a 48-pin QFN footprint and Gigabit Ethernet positioning, a 0% difference in pin count; exact pin-function and rate differences require datasheet verification

📋 بديل مرجعي (غير موجود في الكتالوج)

BCM54240C1KFBG

✅ بديل مباشر
📦 48-pin QFN
Retains a 48-pin QFN footprint and Gigabit Ethernet positioning, a 0% difference in pin count; port architecture and electrical differences require datasheet verification

📋 بديل مرجعي (غير موجود في الكتالوج)

BCM54140B0KFBG

✅ بديل مباشر
📦 48-pin QFN
Retains a 48-pin QFN footprint and Gigabit Ethernet positioning, a 0% difference in pin count; exact feature and qualification deltas require datasheet verification

📋 بديل مرجعي (غير موجود في الكتالوج)

BCM5461A1KPF

✅ بديل مباشر
📦 48-pin QFN (KPF)
Retains the 48-pin QFN footprint and single-port Gigabit Ethernet class, a 0% difference in pin count; the final package suffix and orderable configuration must be checked

📋 بديل مرجعي (غير موجود في الكتالوج)

BCM5461A1KPFG الحدود القصوى والخصائص الكهربائية

Product Type Single-port Gigabit Ethernet transceiver
Ethernet Standard 10/100/1000BASE-T
Maximum Data Rate 1 Gb/s
Legacy Data Rates 10 Mb/s and 100 Mb/s
Number of Ports 1 port
Medium Twisted-pair copper Ethernet
العلبة 48-pin QFN (KPFG)
نوع التركيب Surface mount

دليل تكوين أطراف BCM5461A1KPFG 48-pin qfn (kpfg)

تكوين الأطراف لـ BCM5461A1KPFG (حزمة 48-pin qfn (kpfg)). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 48-pin qfn (kpfg) لـ BCM5461A1KPFG

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ BCM5461A1KPFG.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

BCM5461A1KPFG مناسب لـ 6 التطبيقs: Industrial Ethernet Gateway, Embedded Network Interface Module, Network-Attached Control Terminal, Printer and Embedded Peripheral, Set-Top Media Gateway, Industrial Router Single-Port Interface.

🏭

Industrial Ethernet Gateway

The BCM5461A1KPFG is suitable for the copper-network interface of an industrial gateway because it combines 10/100/1000BASE-T support with a compact 48-pin QFN package. A gateway can use the single port to connect a controller, data concentrator, or protocol-conversion equipment to a plant network without requiring three separate Ethernet rate interfaces. The 10 Mb/s and 100 Mb/s compatibility is useful during plant migrations where switches or field equipment operate at mixed speeds. In the completed design, use the manufacturer's reference circuit and layout for the Ethernet analog section, supply decoupling, reference clock, and magnetics. Validate the industrial temperature, surge, isolation, and regulatory requirements against the exact device grade before production release.

🌐

Embedded Network Interface Module

The BCM5461A1KPFG can provide the physical copper-Ethernet layer for an embedded network-interface module whose host processor requires 10/100/1000BASE-T connectivity. Its multi-speed support allows the same module to operate with legacy access equipment and Gigabit infrastructure, while the 48-pin QFN format limits board-space consumption compared with a larger leaded package. The module implementation must allocate board area for the prescribed magnetics or integrated-magnetics solution and preserve controlled differential routing between the transceiver and network connector. Host-interface timing, interrupt handling, firmware support, and clock requirements should be taken directly from the manufacturer datasheet rather than inferred from the Ethernet rate alone.

🧩

Network-Attached Control Terminal

The BCM5461A1KPFG fits a network-attached control terminal that connects a local user interface or embedded controller to a remote management network. Supporting 10, 100, and 1000 Mb/s allows deployment across corporate, building-automation, and factory networks without forcing one fixed Ethernet speed. The single-port topology also keeps the device count and PCB area appropriate for compact control hardware. For reliable operation, isolate Ethernet and digital circuitry appropriately, provide clean decoupling at the transceiver supply pins, and route TX and RX differential pairs away from switching nodes and noisy clocks. Confirm the terminal's operating-temperature range and network-isolation requirements before selecting the final device ordering configuration.

🖥️

Printer and Embedded Peripheral

The BCM5461A1KPFG is applicable to a printer or embedded peripheral that needs one bidirectional copper-Ethernet port. The 10/100/1000BASE-T capability supports service networks that may contain legacy 100 Mb/s equipment alongside modern Gigabit connections, and the surface-mount QFN package is suitable for compact consumer and industrial mechanism boards. Placement near the network connector can reduce the length of sensitive analog Ethernet routes, but the layout must still preserve the manufacturer's differential-impedance and isolation geometry. Power consumption, thermal behavior, wake-up requirements, and host-driver support should be reviewed from the exact device documentation before choosing it over a simpler 100 Mb/s PHY.

📺

Set-Top Media Gateway

The BCM5461A1KPFG can serve a set-top or media gateway that connects over an existing copper network and must support both legacy and Gigabit Ethernet links. Automatic rate-class compatibility simplifies installation across homes, hospitality networks, and commercial distribution systems where infrastructure capabilities vary. The compact 48-pin QFN package leaves board area for storage, security, and media-processing circuitry, while the Ethernet section remains isolated from sensitive analog pathways. Implement the manufacturer-recommended magnetics, termination, reference clock, and decoupling network. Confirm regulatory requirements for consumer media equipment, thermal limits, and the host-side interface support before committing the component to a new design.

🌐

Industrial Router Single-Port Interface

The BCM5461A1KPFG is suitable for a single-port interface within an industrial router or communications appliance where one copper uplink serves management traffic, configuration access, or a downstream network segment. Supporting 10BASE-T through 1000BASE-T improves deployment flexibility when connecting legacy equipment, while the QFN footprint simplifies dense board placement. The design should provide the required Ethernet magnetics, reference clock, isolation strategy, and clean supply rails while keeping sensitive differential routes away from processor memory and switching regulators. For a multi-port router, a multi-port Ethernet device may be more efficient; for a single-port management function, this focused device can reduce unused-port overhead. Verify temperature, regulatory, and sustained-throughput requirements during design validation.

ملخص المنتجات الموصى بها

BCM5461SA1KPFG Single-port BCM5461-family Ethernet candidate يُستخدم في: Industrial Ethernet Gateway, Network-Attached Control Terminal LAN9730-ABZJ-TR Microchip Technology يُستخدم في: Industrial Ethernet Gateway BCM54180B0IFBG Broadcom Gigabit Ethernet interface candidate يُستخدم في: Embedded Network Interface Module LAN9313I-NZW-TR Microchip Technology يُستخدم في: Embedded Network Interface Module KSZ8081RNACA Microchip Technology يُستخدم في: Network-Attached Control Terminal KSZ8041RNL-TR Microchip Technology يُستخدم في: Printer and Embedded Peripheral BCM54140B0KFBG Broadcom embedded Ethernet candidate يُستخدم في: Printer and Embedded Peripheral BCM54240C1KFBG Broadcom Gigabit Ethernet interface candidate يُستخدم في: Set-Top Media Gateway LAN7500I-ABZJ-TR Microchip Technology يُستخدم في: Set-Top Media Gateway BCM5461A1KPF BCM5461-family single-port Ethernet candidate يُستخدم في: Industrial Router Single-Port Interface KSZ8721BA4TR Microchip Technology يُستخدم في: Industrial Router Single-Port Interface
What is the BCM5461A1KPFG?
The BCM5461A1KPFG is a Broadcom single-port 10/100/1000BASE-T Ethernet transceiver for copper-network connections. It supports 10 Mb/s, 100 Mb/s, and 1 Gb/s operation and is supplied in a 48-pin QFN package. The manufacturer datasheet should be used for the complete electrical characteristics, register map, clock requirements, and reference circuit.
What Ethernet speeds does BCM5461A1KPFG support?
The BCM5461A1KPFG supports 10BASE-T, 100BASE-T, and 1000BASE-T operation, providing compatibility from 10 Mb/s through 1 Gb/s. This multi-rate support is useful when an equipment manufacturer must interoperate with older 10/100 Mb/s access ports as well as Gigabit switches. The manufacturer datasheet defines the detailed negotiation and auto-negotiation behavior.
What package does BCM5461A1KPFG use?
The BCM5461A1KPFG uses the Broadcom KPFG, a 48-pin QFN surface-mount package. Its compact land pattern supports dense embedded Ethernet designs but requires careful PCB layout around high-speed differential pairs. Use the package drawing and land-pattern dimensions in the manufacturer datasheet when defining solder masks, paste apertures, and courtyard clearances.
Where can I download the BCM5461A1KPFG datasheet PDF?
The BCM5461A1KPFG datasheet PDF is available from the datasheet source listed on this product page. It contains the authoritative pin descriptions, electrical characteristics, register information, timing diagrams, and recommended application circuit. Start with the pin-description table before assigning PCB nets, and follow the reference-layout section for Ethernet magnetics and high-speed trace routing.
Where can I find the BCM5461A1KPFG pinout?
The BCM5461A1KPFG pinout is presented in the manufacturer datasheet's pin-description table and package outline. Because this is a 48-pin QFN device, all 48 terminal assignments must be checked against the exact KPFG drawing before PCB release. Assign power, ground, reference-clock, serial-interface, and analog Ethernet signals strictly from that table rather than from a generic QFN layout.
Is BCM5461A1KPFG suitable for an industrial Ethernet gateway?
The BCM5461A1KPFG can suit an industrial Ethernet gateway when its electrical ratings, temperature range, and interface requirements meet the system specification. Its 10/100/1000BASE-T support allows compatibility with both legacy and Gigabit copper networks. Industrial qualification also requires checking temperature grade, isolation strategy, surge protection, and regulatory requirements for the finished equipment.
Can BCM5461A1KPFG be used for a single-port network interface?
Yes, the BCM5461A1KPFG is identified as a single-port Ethernet device, making it appropriate for one 10/100/1000BASE-T copper interface. The surrounding processor must be able to communicate with the transceiver through the interface defined by the manufacturer. A complete design also needs the specified reference components, magnetics or magnetics integration method, and compliant board-level Ethernet layout.
BCM5461A1KPFG vs BCM5461SA1KPFG - which one should I choose?
The two parts belong to the same Broadcom BCM5461 single-port 10/100/1000BASE-T family and are associated with the same KPFG package naming pattern. Their functional and feature differences must be confirmed in the manufacturer datasheet before substitution. Treat BCM5461SA1KPFG as a close replacement candidate only after checking pin functions, electrical limits, register behavior, temperature grade, and qualification requirements.
What can replace BCM5461A1KPFG on the same PCB?
A valid PCB replacement must use the same 48-pin QFN land pattern, preserve pin-to-pin signal assignments, and satisfy the original 10/100/1000BASE-T system requirements. BCM5461SA1KPFG is the closest listed family candidate, while several related Broadcom Ethernet devices require individual review. No replacement should be approved from the family name alone; compare the exact pin table, electrical limits, clocking, firmware support, and reference circuit.
Is the Broadcom BCM5461SA1KPFG a drop-in replacement for BCM5461A1KPFG?
The Broadcom BCM5461SA1KPFG is a close drop-in candidate because it uses the same KPFG package and belongs to the BCM5461 single-port Gigabit Ethernet family. It should be considered a confirmed drop-in only after the manufacturer datasheet establishes identical pin functions and compatible operating requirements. Firmware, feature, temperature, and lifecycle differences can still affect a production redesign.
What is the best Broadcom equivalent for BCM5461A1KPFG?
The Broadcom BCM5461SA1KPFG is the best-supported equivalent candidate because its ordering code identifies the same BCM5461 family, single-port 10/100/1000BASE-T application, and KPFG package. It offers distinct sourcing value without changing the board footprint. Final equivalence still depends on matching the exact electrical limits, pin behavior, qualification, and register implementation.
When should I choose BCM5461A1KPFG instead of a multi-port Ethernet device?
Choose BCM5461A1KPFG when the product requires exactly one copper Ethernet port and benefits from a compact single-port implementation. It is a better fit than a multi-port device when unused ports would add cost, board area, and unnecessary clock or power-management complexity. For switch, dual-port, or multi-port router designs, evaluate a device whose port count and internal switching architecture match the system.
What are the key specifications of BCM5461A1KPFG that engineers should know?
The confirmed headline specifications are single-port operation, 10/100/1000BASE-T support, a maximum class of 1 Gb/s Ethernet, and a 48-pin QFN KPFG package. These characteristics place the device in the copper Gigabit Ethernet physical-layer category and make it suitable for embedded single-port networking. Supply voltage, temperature limits, pin functions, clocking, and detailed timing must be taken from the manufacturer datasheet.
Where can I buy BCM5461A1KPFG and check current lead time?
Use the Request a Quote form on this XAIPART product page to request BCM5461A1KPFG availability, current commercial terms, lot information, and lead time. The form allows the request to be tied to the exact 48-pin QFN ordering code rather than a similar BCM5461 variant. Package and date-code requirements can be stated with the quotation request.
What is the price of BCM5461A1KPFG?
Use the Request a Quote form on this page for the current BCM5461A1KPFG commercial quotation. Pricing can vary with quantity, inventory condition, date code, packaging, and shipment requirements, so a quantity-specific quote provides the most useful purchasing information. The form also supports requests covering multiple production builds and scheduled procurement.
Is BCM5461A1KPFG in stock?
Current BCM5461A1KPFG stock should be confirmed through the Request a Quote form on this page. Include your required quantity, approved package suffix, date-code policy, and target delivery date so the quotation can reflect usable inventory rather than an unconstrained catalog quantity. For production planning, also confirm whether segmented supply or traceability requirements apply.

بيانات مرجعية هندسية لـ BCM5461A1KPFG — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose BCM5461A1KPFG for a compact single-port copper Ethernet interface requiring 10/100/1000BASE-T operation in a 48-pin QFN footprint. It is especially appropriate for gateways, embedded modules, control terminals, printers, and media equipment where exactly one Ethernet link is needed. BCM5461SA1KPFG is the closest family candidate for a second-source or lifecycle review, provided its exact pin, electrical, firmware, and qualification characteristics match. BCM5461A1KPF may suit designs that can use the shorter ordering suffix, but the package suffix and procurement configuration must be confirmed. BCM54180B0IFBG, BCM54240C1KFBG, and BCM54140B0KFBG should be evaluated only after a terminal-by-terminal and application-level comparison. For multi-port routers, choose a multi-port Ethernet device instead. For legacy 100 Mb/s-only products, a simpler PHY may reduce power and cost, while systems requiring exact BCM5461 software support and the KPFG footprint should retain the target ordering code.

المقارنة مع البدائل

المعامل هذا المنتج BCM5461SA1KPFG BCM54180B0IFBG BCM54240C1KFBG BCM54140B0KFBG BCM5461A1KPF
Brand Broadcom Broadcom Broadcom Broadcom Broadcom Broadcom
Package 48-pin QFN (KPFG) 48-pin QFN (KPFG) 48-pin QFN 48-pin QFN 48-pin QFN 48-pin QFN (KPF)
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

أبرز الفروقات

  • Single-port implementation with three-rate Ethernet support (مقابلBCM5461SA1KPFG)
  • Exact BCM5461-family sourcing alignment (مقابلBCM5461A1KPF)
  • No multi-port hardware overhead for single-link equipment (مقابلBCM54240C1KFBG)
  • Gigabit rate class retained within the replacement family (مقابلBCM54140B0KFBG)

ملاحظات التصميم

Use the manufacturer reference layout as the controlling geometry for the KPFG 48-pin QFN. Position the Ethernet magnetics close to the network connector, route the differential TX and RX pairs as matched pairs over continuous reference planes, and avoid crossing splits or unrelated high-current paths. Keep the analog Ethernet section away from switching regulators, clocks, and processor memory. Verify differential impedance, pair-length balance, via symmetry, and isolation clearances with the actual PCB stack-up before fabrication.

Place all required bypass and decoupling capacitors close to their associated device and magnetics supply pins, following the capacitor values and connection sequence shown in the manufacturer reference circuit. Provide low-impedance supply and ground planes so transient current from Ethernet line-driving circuitry does not disturb the host interface. Estimate worst-case supply dissipation from the selected operating voltage and Ethernet activity, then verify that the QFN thermal pad, solder mask, copper area, and ambient temperature support the required junction-temperature margin.

Treat the analog Ethernet path as a controlled-impedance structure rather than a generic low-speed connection. Confirm the magnetics model and its recommended layout with the selected supplier, maintain symmetry between each differential pair, and provide the prescribed termination or bias network. Avoid adding test pads or routing stubs on sensitive pairs unless their effects are evaluated. Validate compliance with the applicable Ethernet interface tests using the complete magnetics, PCB, firmware, and clock configuration rather than testing the IC alone.

Do not substitute a related Broadcom Ethernet device solely because it also uses a 48-pin QFN. Before approving BCM5461SA1KPFG, BCM54180B0IFBG, BCM54240C1KFBG, BCM54140B0KFBG, or BCM5461A1KPF as a replacement, compare every terminal, supply requirement, reference clock, host interface, reset requirement, magnetics interface, temperature grade, and software-support item. Check the exact package drawing and orderable suffix as well. A footprint match alone does not establish drop-in electrical or functional compatibility.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance status must be confirmed from the manufacturer product page or declaration for the exact BCM5461A1KPFG ordering code. The G suffix does not by itself establish compliance status.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

BCM5461A1KPFG datasheet BCM5461A1KPFG pinout BCM5461A1KPFG datasheet pdf BCM5461A1KPFG specifications BCM5461A1KPFG price BCM5461A1KPFG stock Broadcom BCM5461A1KPFG BCM5461A1KPFG equivalent BCM5461A1KPFG replacement BCM5461A1KPFG footprint BCM5461A1KPFG vs BCM5461SA1KPFG BCM5461A1KPFG application circuit

المكونات والمصطلحات ذات الصلة

Broadcom BCM5461A1KPFG BCM5461SA1KPFG BCM54180B0IFBG BCM54240C1KFBG BCM54140B0KFBG BCM5461A1KPF Ethernet transceiver Ethernet controller Gigabit Ethernet 10/100/1000BASE-T physical layer copper Ethernet twisted-pair Ethernet QFN-48 KPFG package surface mount SMD Ethernet magnetics differential pair impedance-controlled routing industrial Ethernet embedded networking 10BASE-T 100BASE-T
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر