BCM5461A1KPFG - 10/100/1000BASE-T Ethernet | Broadcom
Артикул: BCM5461A1KPFG ✓ АктивенBCM5461A1KPFG Обзор
An Ethernet transceiver is the physical-layer component that connects a digital network processor or communications system to twisted-pair cabling. The PHY performs signal encoding and decoding, clock recovery, link negotiation, and electrical-interface functions required by 10/100/1000BASE-T. A device combining these capabilities simplifies board design by reducing the number of separate Ethernet components and associated high-speed routing requirements.
The BCM5461A1KPFG belongs to Broadcom's BCM5461 family of single-port Gigabit Ethernet devices. Its 10/100/1000BASE-T designation indicates automatic support for legacy 10 Mb/s and 100 Mb/s links as well as 1 Gb/s operation. That combination allows a product to interoperate with slower network equipment and copper cabling infrastructure while preserving a path to Gigabit throughput.
The KPFG package designation identifies the physical configuration used for this ordering code. In a completed Ethernet design, the device requires the appropriate power, decoupling, clock, magnetic-component, and signal-routing support for a compliant 10/100/1000BASE-T interface. Magnetics, termination networks, and board geometry are as important to link performance as the controller itself.
Typical implementation roles include industrial Ethernet gateways, embedded routers, network-interface modules, set-top equipment, printers, storage systems, and control panels. Automatic support for multiple speeds is useful in mixed environments where endpoint capabilities and switch ports may differ. The device is particularly relevant where a compact surface-mount footprint is preferred over a discrete PHY arrangement.
PCB implementation should prioritize short, impedance-controlled differential traces, careful separation between transmit and receive paths, and a quiet supply network. Place input and output decoupling capacitors close to their associated power pins, keep the Ethernet magnetics close to the transceiver, and follow the manufacturer's recommended reference layout. This page organizes the confirmed device identity, sourcing information, comparison candidates, and design considerations into a practical engineering reference.
Аналоги без доработки для BCM5461A1KPFG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
BCM5461SA1KPFG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
BCM54180B0IFBG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
BCM54240C1KFBG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
BCM54140B0KFBG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
BCM5461A1KPF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
BCM5461A1KPFG Максимальные параметры и электрические характеристики
| Product Type | Single-port Gigabit Ethernet transceiver |
| Ethernet Standard | 10/100/1000BASE-T |
| Maximum Data Rate | 1 Gb/s |
| Legacy Data Rates | 10 Mb/s and 100 Mb/s |
| Number of Ports | 1 port |
| Medium | Twisted-pair copper Ethernet |
| Корпус | 48-pin QFN (KPFG) |
| Тип монтажа | Surface mount |
Руководство по цоколевке BCM5461A1KPFG в корпусе 48-pin qfn (kpfg)
Цоколевка для BCM5461A1KPFG (корпус 48-pin qfn (kpfg)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для BCM5461A1KPFG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
BCM5461A1KPFG подходит для 6 применениеs: Industrial Ethernet Gateway, Embedded Network Interface Module, Network-Attached Control Terminal, Printer and Embedded Peripheral, Set-Top Media Gateway, Industrial Router Single-Port Interface.
Industrial Ethernet Gateway
The BCM5461A1KPFG is suitable for the copper-network interface of an industrial gateway because it combines 10/100/1000BASE-T support with a compact 48-pin QFN package. A gateway can use the single port to connect a controller, data concentrator, or protocol-conversion equipment to a plant network without requiring three separate Ethernet rate interfaces. The 10 Mb/s and 100 Mb/s compatibility is useful during plant migrations where switches or field equipment operate at mixed speeds. In the completed design, use the manufacturer's reference circuit and layout for the Ethernet analog section, supply decoupling, reference clock, and magnetics. Validate the industrial temperature, surge, isolation, and regulatory requirements against the exact device grade before production release.
Рекомендуется
Embedded Network Interface Module
The BCM5461A1KPFG can provide the physical copper-Ethernet layer for an embedded network-interface module whose host processor requires 10/100/1000BASE-T connectivity. Its multi-speed support allows the same module to operate with legacy access equipment and Gigabit infrastructure, while the 48-pin QFN format limits board-space consumption compared with a larger leaded package. The module implementation must allocate board area for the prescribed magnetics or integrated-magnetics solution and preserve controlled differential routing between the transceiver and network connector. Host-interface timing, interrupt handling, firmware support, and clock requirements should be taken directly from the manufacturer datasheet rather than inferred from the Ethernet rate alone.
Рекомендуется
Network-Attached Control Terminal
The BCM5461A1KPFG fits a network-attached control terminal that connects a local user interface or embedded controller to a remote management network. Supporting 10, 100, and 1000 Mb/s allows deployment across corporate, building-automation, and factory networks without forcing one fixed Ethernet speed. The single-port topology also keeps the device count and PCB area appropriate for compact control hardware. For reliable operation, isolate Ethernet and digital circuitry appropriately, provide clean decoupling at the transceiver supply pins, and route TX and RX differential pairs away from switching nodes and noisy clocks. Confirm the terminal's operating-temperature range and network-isolation requirements before selecting the final device ordering configuration.
Рекомендуется
Printer and Embedded Peripheral
The BCM5461A1KPFG is applicable to a printer or embedded peripheral that needs one bidirectional copper-Ethernet port. The 10/100/1000BASE-T capability supports service networks that may contain legacy 100 Mb/s equipment alongside modern Gigabit connections, and the surface-mount QFN package is suitable for compact consumer and industrial mechanism boards. Placement near the network connector can reduce the length of sensitive analog Ethernet routes, but the layout must still preserve the manufacturer's differential-impedance and isolation geometry. Power consumption, thermal behavior, wake-up requirements, and host-driver support should be reviewed from the exact device documentation before choosing it over a simpler 100 Mb/s PHY.
Рекомендуется
Set-Top Media Gateway
The BCM5461A1KPFG can serve a set-top or media gateway that connects over an existing copper network and must support both legacy and Gigabit Ethernet links. Automatic rate-class compatibility simplifies installation across homes, hospitality networks, and commercial distribution systems where infrastructure capabilities vary. The compact 48-pin QFN package leaves board area for storage, security, and media-processing circuitry, while the Ethernet section remains isolated from sensitive analog pathways. Implement the manufacturer-recommended magnetics, termination, reference clock, and decoupling network. Confirm regulatory requirements for consumer media equipment, thermal limits, and the host-side interface support before committing the component to a new design.
Рекомендуется
Industrial Router Single-Port Interface
The BCM5461A1KPFG is suitable for a single-port interface within an industrial router or communications appliance where one copper uplink serves management traffic, configuration access, or a downstream network segment. Supporting 10BASE-T through 1000BASE-T improves deployment flexibility when connecting legacy equipment, while the QFN footprint simplifies dense board placement. The design should provide the required Ethernet magnetics, reference clock, isolation strategy, and clean supply rails while keeping sensitive differential routes away from processor memory and switching regulators. For a multi-port router, a multi-port Ethernet device may be more efficient; for a single-port management function, this focused device can reduce unused-port overhead. Verify temperature, regulatory, and sustained-throughput requirements during design validation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для BCM5461A1KPFG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | BCM5461SA1KPFG | BCM54180B0IFBG | BCM54240C1KFBG | BCM54140B0KFBG | BCM5461A1KPF |
|---|---|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | 48-pin QFN (KPFG) | 48-pin QFN (KPFG) | 48-pin QFN | 48-pin QFN | 48-pin QFN | 48-pin QFN (KPF) |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Ключевые отличия
- Single-port implementation with three-rate Ethernet support (против BCM5461SA1KPFG)
- Exact BCM5461-family sourcing alignment (против BCM5461A1KPF)
- No multi-port hardware overhead for single-link equipment (против BCM54240C1KFBG)
- Gigabit rate class retained within the replacement family (против BCM54140B0KFBG)
Заметки по проектированию
Use the manufacturer reference layout as the controlling geometry for the KPFG 48-pin QFN. Position the Ethernet magnetics close to the network connector, route the differential TX and RX pairs as matched pairs over continuous reference planes, and avoid crossing splits or unrelated high-current paths. Keep the analog Ethernet section away from switching regulators, clocks, and processor memory. Verify differential impedance, pair-length balance, via symmetry, and isolation clearances with the actual PCB stack-up before fabrication.
Place all required bypass and decoupling capacitors close to their associated device and magnetics supply pins, following the capacitor values and connection sequence shown in the manufacturer reference circuit. Provide low-impedance supply and ground planes so transient current from Ethernet line-driving circuitry does not disturb the host interface. Estimate worst-case supply dissipation from the selected operating voltage and Ethernet activity, then verify that the QFN thermal pad, solder mask, copper area, and ambient temperature support the required junction-temperature margin.
Treat the analog Ethernet path as a controlled-impedance structure rather than a generic low-speed connection. Confirm the magnetics model and its recommended layout with the selected supplier, maintain symmetry between each differential pair, and provide the prescribed termination or bias network. Avoid adding test pads or routing stubs on sensitive pairs unless their effects are evaluated. Validate compliance with the applicable Ethernet interface tests using the complete magnetics, PCB, firmware, and clock configuration rather than testing the IC alone.
Do not substitute a related Broadcom Ethernet device solely because it also uses a 48-pin QFN. Before approving BCM5461SA1KPFG, BCM54180B0IFBG, BCM54240C1KFBG, BCM54140B0KFBG, or BCM5461A1KPF as a replacement, compare every terminal, supply requirement, reference clock, host interface, reset requirement, magnetics interface, temperature grade, and software-support item. Check the exact package drawing and orderable suffix as well. A footprint match alone does not establish drop-in electrical or functional compatibility.
Информация о соответствии
Compliance status must be confirmed from the manufacturer product page or declaration for the exact BCM5461A1KPFG ordering code. The G suffix does not by itself establish compliance status.