C8051F000-GQ 20MHz 32KB Flash 8051 MCU | Silicon Labs
MPN: C8051F000-GQ ✗ انتهى عمره الإنتاجيC8051F000-GQ نظرة عامة
A microcontroller is a programmable system-on-chip that combines a CPU core, program memory, data memory, and peripherals into one component. The C8051F000 belongs to the 8051-compatible microcontroller family and sits within the broader hierarchy of embedded processors, microcontrollers, and mixed-signal ICs. Its C8051F00x architecture is suited to industrial control, measurement, communications, and embedded automation products where predictable timing and compact integration are important.
Key device features include a 20 MHz clock, 32 KB of Flash memory organized as 32K by 8 bytes, and 256 bytes of RAM. The family includes on-chip JTAG debug circuitry that supports non-intrusive, full-speed in-circuit debugging with the four-pin JTAG interface. The Silicon Labs C8051F0xx data sheet also identifies in-system programming support and mixed-signal capabilities for applications that combine digital control with analog measurement.
The C8051F000-GQ is specified for a 3.3 V supply, with listings indicating 3.30 V operation and a 3.60 V maximum supply voltage. Its 64-pin TQFP-64 surface-mount package provides the mixed-signal peripheral connections needed for larger control systems. Because the device is marked “Not For New Designs,” engineers should confirm lifecycle availability and obtain manufacturer approval before starting a new production design.
Typical applications include industrial controllers, sensor-conditioning and data-acquisition equipment, communications equipment, motor and process control, and embedded instrumentation. The 8051 instruction set and existing C8051 development ecosystem can reduce software migration effort when replacing an earlier 8051-family design while retaining the same 64-lead footprint.
For new layouts, check the C8051F0xx data sheet pin table and application notes before assigning PCB tracks, especially for analog inputs, supply decoupling, oscillator connections, and JTAG signals. Confirm the exact package drawing, exposed thermal considerations, and peripheral multiplexing for the selected board revision.
بدائل مباشرة لـ C8051F000-GQ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع C8051F000-GQ (نفس عامل الشكل والبصمة) — يختلف في Maximum Clock Frequency, Package, Flash Memory.
C8051F005-GQ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
C8051F010-GQ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
C8051F015-GQ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
C8051F230-GQ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
C8051F380-GQ
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←C8051F000-GQ الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit mixed-signal microcontroller |
| Core Architecture | 8051-compatible C8051 core |
| أقصى تردد للساعة | 20 MHz |
| Flash Memory | 32 KB (32K x 8) |
| RAM Size | 256 bytes |
| جهد التغذية | 3.30 V nominal |
| Maximum Supply Voltage | 3.60 V |
| العلبة | TQFP-64, 10 mm x 10 mm |
| عدد الدبابيس | 64 pins |
| نوع التركيب | Surface mount |
| Program Memory Type | ISP Flash |
| Debug Interface | 4-pin JTAG |
| On-Chip Debug | Full-speed, non-intrusive in-circuit debug |
| نطاق درجة حرارة التشغيل | -40 °C to +85 °C |
| Core Processor | 8-bit |
| Manufacturer Product Family | C8051F00x mixed-signal MCU family |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| حالة دورة الحياة | Not For New Designs |
دليل تكوين أطراف C8051F000-GQ tqfp-64, 10 mm x 10 mm
تكوين الأطراف لـ C8051F000-GQ (حزمة tqfp-64, 10 mm x 10 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ C8051F000-GQ.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
C8051F000-GQ مناسب لـ 6 التطبيقs: Industrial Sensor and Process Control, Data Acquisition and Instrumentation, Communications Equipment, Embedded Motor and Valve Control, Legacy 8051 Product Maintenance, Mixed-Signal Control Boards.
Industrial Sensor and Process Control
The C8051F000-GQ fits compact industrial controllers that read sensors and actuate relays, valves, or indicators. Its 8051-compatible 20 MHz core provides deterministic instruction execution, while 32 KB of Flash accommodates application code, calibration tables, and communication routines. The 256-byte RAM is modest but sufficient for small control loops. Use the mixed-signal peripherals to reduce external circuitry, isolate analog signals according to the data sheet, and verify the 3.30 V supply. For production equipment, confirm long-term availability because the device is marked Not For New Designs.
موصى به
Data Acquisition and Instrumentation
The C8051F000-GQ can serve as the control core of a compact measurement instrument that converts mixed-signal inputs into processed sensor data. Its 20 MHz clock supports fast interrupt servicing and digital filtering, while the 32 KB Flash supports calibration, scaling, and protocol handling. The 64-lead TQFP package exposes the analog and digital resources needed for multi-channel designs. Keep analog inputs away from fast digital and JTAG routing, use the manufacturer reference layout for bypass capacitors, and validate gain, accuracy, and channel multiplexing against the complete family data sheet.
موصى به
Communications Equipment
The C8051F000-GQ is appropriate for legacy communications modules that need local control, protocol handling, and status reporting without a high-end processor. The 8051 instruction set and C8051 development environment allow existing communications firmware to be maintained, while the 32 KB Flash provides room for a complete embedded protocol stack. At 3.30 V operation, the device fits many industrial and embedded boards. Confirm UART, SMBus, oscillator, and interrupt requirements before assignment, and use the four-pin JTAG interface for efficient field debugging.
موصى به
Embedded Motor and Valve Control
The C8051F000-GQ can manage timing-sensitive control tasks in small motor, pump, or valve controllers. A 20 MHz 8051 core executes motor-sequence logic while the mixed-signal resources support feedback and current sensing. The 64-pin TQFP package offers enough external connections for control outputs, status LEDs, and serial service access. Design isolation and drive circuitry around the MCU rather than driving loads directly, protect switching nodes from transients, and validate timing against the selected peripheral configuration. For new high-current designs, verify availability before committing the architecture.
موصى به
Legacy 8051 Product Maintenance
The C8051F000-GQ is particularly useful for maintaining products built around the C8051F00x platform, where replacing the MCU with a different architecture would require substantial firmware and board changes. Its familiar 8051-compatible instruction set, 32 KB of Flash, and 64-lead TQFP package support targeted repair and continuation builds. Confirm peripheral equivalence, oscillator behavior, pin multiplexing, and electrical limits for every revision of the original board. Use the manufacturer C8051F0xx data sheet and the original schematic to establish a pin-accurate replacement plan.
موصى به
Mixed-Signal Control Boards
The C8051F000-GQ combines an 8051-compatible digital core with mixed-signal resources, making it practical for control boards that digitize external analog conditions and operate actuators from the same device. The 20 MHz core manages protocol tasks and control logic, and the 32 KB Flash holds application and calibration code. Keep analog routing short and separated from switching nodes, use the manufacturer bypass recommendations, and place the JTAG connector where it can be accessed without disturbing sensitive signals. Validate offset, noise, and converter performance over the full operating range.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ C8051F000-GQ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | C8051F005-GQ | C8051F010-GQ | C8051F015-GQ | C8051F230-GQ | C8051F380-GQ |
|---|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | 8-bit 8051-compatible | 8-bit 8051-compatible | 8051-compatible C8051 family | 8051-compatible C8051 family | 8051-compatible C8051 family | 8051-compatible C8051 family |
أبرز الفروقات
- Exact 20 MHz operating point within the C8051F00x family (مقابلC8051F005-GQ)
- Compact mixed-signal integration in 64-pin TQFP (مقابلC8051F230-GQ)
- Established C8051F00x software and debug ecosystem (مقابلC8051F380-GQ)
ملاحظات التصميم
Route the C8051F0xx supply and ground pins according to the manufacturer decoupling guidance, and place bypass capacitors close to the device rather than at the power-entry point. Keep analog inputs, voltage references, and low-level sensor traces away from JTAG and switching-node routing. Use the TQFP-64 land pattern from the package drawing and confirm pin multiplexing against the specific C8051F000 variant before releasing artwork.
The four-pin JTAG interface provides non-intrusive full-speed debugging, but debug signals still need controlled routing. Keep the JTAG connector accessible, provide clean reference grounds, and avoid routing debug nets parallel to sensitive analog inputs. When using the 25 MHz C8051F005-GQ as an alternative, recheck oscillator layout and timing-sensitive traces rather than assuming that the higher clock can be substituted without margin analysis.
Do not treat identical package dimensions as proof of unconditional interchangeability. The C8051F000, C8051F005, and other 64-pin family members can differ in clock, memory, peripheral assignments, and reset behavior. For each migration, compare the pin table, electrical characteristics, oscillator requirements, and firmware configuration. The target is marked Not For New Designs, so lifecycle approval and supply planning are part of the design review.
معلومات الامتثال
The target is a general-purpose mixed-signal microcontroller marked Not For New Designs. Explicit certification statements were not present in the manufacturer or distributor records used for this listing.