Harris Corporation

CD4024AK3 - 7-Bit CMOS Binary Counter | Harris Corporation

MPN: CD4024AK3 ✗ انتهى عمره الإنتاجي
PDSO14 Package Negative edge Speed
الحد الأدنى للطلب: 1 |

CD4024AK3 نظرة عامة

The Harris Corporation CD4024AK3 is a 7-bit asynchronous, ripple-carry CMOS binary counter with negative-edge triggering and up-counting operation in a 14-pin PDSO package. It provides 128 count states, seven parallel binary outputs, and separate clock, reset, and carry connections. The part belongs to the CD4000 CMOS logic family and is intended for digital counting, frequency division, state sequencing, and timing applications.

A CMOS binary counter is a synchronous-state logic device that advances through a predetermined sequence when triggered by an external clock. The CD4024AK3 is an asynchronous ripple counter, meaning each internal stage transitions in sequence after the preceding stage. Its negative-edge clock triggering makes the count change on the falling transition of the clock signal, while the parallel output pins expose the current seven-bit count.

Key features include 7-bit counting capacity, 128 selectable states, negative-edge triggering, and operation as a single one-element counter element. The output count advances in the up direction from binary 0000000 through 1111111. A dedicated reset input initializes the counter, and the carry output provides an indication that the terminal count has been reached. These functions support binary-frequency division, programmable timing chains, and repeatable event sequencing.

The CD4000-series architecture uses CMOS logic, allowing operation from the same supply rail as the surrounding digital system while producing complementary outputs. Because the counter contains cascaded internal stages, propagation delay accumulates through the chain. Designers should include this accumulated delay when determining maximum clock frequency or when using the carry output to trigger downstream circuitry.

Typical applications include digital time-base generation, sequential industrial controls, test-equipment pulse counting, frequency division, repetitive-event indexing, and programmable control logic. The seven outputs can directly represent a binary state or feed multiplexers, decoders, display drivers, and memory address logic. Negative-edge triggering also allows several counters to be cascaded while maintaining predictable event timing.

For reliable implementation, connect unused inputs to defined logic levels, observe the power-supply limits and absolute maximum ratings in the manufacturer datasheet, and account for package-specific lead assignments. The reset path should be kept free from long traces or noisy nodes because it establishes the starting state for every counting cycle. Decoupling near the supply pins helps reduce logic noise and false transitions in cascaded arrangements.

This product reference combines the device architecture, package identity, practical design guidance, structured commercial inquiry, and verified source links into a concise engineering selection resource for counter and timing applications.

بدائل مباشرة لـ CD4024AK3 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

CD4024AK

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 PDSO-14
7-bit count capacity and 128-state range are unchanged (0% difference); ordering-code qualification or package marking differs

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4024BK3

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 PDSO-14
7-bit count capacity and 128-state range are unchanged (0% difference); ordering-code grade or marking differs

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4024CK3

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 PDSO-14
7-bit count capacity and 128-state range are unchanged (0% difference); ordering-code grade or marking differs

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4024DK3

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 PDSO-14
7-bit count capacity and 128-state range are unchanged (0% difference); ordering-code grade or marking differs

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4024DP

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 PDSO-14
7-bit count capacity and 128-state range are unchanged (0% difference); ordering-code grade or marking differs

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4024AK3 الحدود القصوى والخصائص الكهربائية

Product Type 7-bit asynchronous binary counter
Counter Element Count 1 element
Counter Width 7 bits
Count Direction Up
Counting Sequence 0 to 127
Logic Technology CMOS
Counting Mode Asynchronous, ripple-carry
Clock Triggering Negative edge
نوع الخرج Parallel binary outputs
Number of Terminals 14 terminals
Package Code PDSO14
Package Shape Rectangular
Terminal Form Flat
Series 4000/14000/40000 CMOS series
نوع التركيب Through-hole

دليل تكوين أطراف CD4024AK3 rectangular

تكوين الأطراف لـ CD4024AK3 (حزمة rectangular). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة rectangular لـ CD4024AK3

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CD4024AK3.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

CD4024AK3 مناسب لـ 6 التطبيقs: Binary Frequency Divider, Programmable Event Sequencer, Digital Time-Base Generator, Industrial Control Stepper, Pulse and Repetition Counter, Test and Measurement Indexing.

⚡

Binary Frequency Divider

The CD4024AK3 is well suited to binary frequency division because it provides seven parallel counter stages, allowing a clock to be divided at 2, 4, 8, 16, 32, 64, or 128 ratios. The negative-edge trigger gives the device a defined switching point, while the seven outputs make each available division stage directly accessible. Because the counter is asynchronous and ripple-carry, the transition delay accumulates through the selected output stage. Designers should therefore use the manufacturer timing limits when establishing the maximum input frequency and should keep the selected output routing short to limit additional delay.

🏭

Programmable Event Sequencer

The CD4024AK3 can form the counting core of a programmable event sequencer because its seven parallel outputs represent 128 distinct states. Each state may enable a different output, gate a timing interval, or advance a control stage. Negative-edge triggering establishes a consistent count-change boundary, which is useful when the next state must begin on a falling clock transition. The design should include a controlled reset path to return every chain to a known state, and timing margins must account for the accumulated propagation delay of the asynchronous counter stages.

⏱️

Digital Time-Base Generator

A CD4024AK3-based time-base generator can derive several related timing divisions from one incoming clock. Seven binary outputs allow coarse and fine timing taps to feed comparators, display drivers, or downstream counters without requiring seven separate oscillator channels. The part's 128-state count range provides useful resolution for repetitive measurement and control cycles. Timing accuracy is governed by the input oscillator, counter propagation delay, and output loading, so the circuit should use a stable reference and account for the datasheet limits of the selected counter stage.

🏭

Industrial Control Stepper

The CD4024AK3 can serve as the state counter in an industrial stepper that indexes discrete machine positions. Its seven parallel outputs allow each position to control a decoder, relay driver, valve, or actuator-enable path. Up-counting and negative-edge triggering provide a straightforward progression from one defined state to the next. The asynchronous ripple architecture requires consideration of transition settling time, particularly when an actuator must not change during counter rollover. A synchronized reset and adequate output timing margin help prevent unintended motion.

🔧

Pulse and Repetition Counter

The CD4024AK3 can count repeated events in pulse-generation, batch-processing, or test systems where an operator needs a binary indication of accumulated activity. The 7-bit output range covers 0 through 127 events before terminal count, and the dedicated carry output provides a convenient indication for extending the count or triggering a completion event. Negative-edge clocking can also reject some signal shapes by selecting an appropriate triggering source. The input network must provide clean transitions because generated or mechanical events can cause multiple counts when no hysteresis or conditioning is present.

🖥️

Test and Measurement Indexing

The CD4024AK3 is useful in test and measurement equipment as a repeatable index for stimulus patterns, measurement sequences, or channel-selection logic. Its seven visible outputs can represent a measurement step, and negative-edge triggering gives the system a precise point at which to update the associated test vector. Since the counter is ripple-based, the selected output should not be treated as changing instantaneously with the clock edge. Allow the worst-case accumulated propagation delay before sampling the counter, and synchronize external control signals when repeatable test timing is critical.

ملخص المنتجات الموصى بها

CD4024AK3 Harris Corporation يُستخدم في: Binary Frequency Divider, Programmable Event Sequencer, Digital Time-Base Generator, Industrial Control Stepper, Pulse and Repetition Counter, Test and Measurement Indexing CD4042BE CMOS counter for related counting functions يُستخدم في: Binary Frequency Divider CD4051BE Texas Instruments يُستخدم في: Programmable Event Sequencer, Industrial Control Stepper, Test and Measurement Indexing CD4040BE Texas Instruments يُستخدم في: Digital Time-Base Generator, Pulse and Repetition Counter CD4078BE Logic gate for state qualification يُستخدم في: Industrial Control Stepper, Test and Measurement Indexing CD4093BE Schmitt-trigger input conditioning يُستخدم في: Pulse and Repetition Counter
What is the Harris Corporation CD4024AK3?
The Harris Corporation CD4024AK3 is a 7-bit asynchronous, negative-edge-triggered CMOS binary counter in a 14-pin PDSO package. According to the Harris product description and the CD4024 manufacturer datasheet, it counts in the up direction, provides parallel binary outputs, and provides a carry function for extending or detecting the terminal count. The device is intended for binary counting, frequency division, timing, and sequential-control applications.
How many count states does the CD4024AK3 provide?
The CD4024AK3 provides 128 count states, corresponding to binary values from 0 through 127. According to the manufacturer datasheet, the device is a 7-bit binary counter with seven parallel output stages. One additional state beyond the normal count can be used during cascading or carry detection, but the basic programmed count sequence covers 7-bit binary values from 0000000 through 1111111.
What clock edge advances the CD4024AK3 counter?
The CD4024AK3 advances on the negative, or falling, edge of its clock input. According to the manufacturer datasheet, the counter is asynchronous and ripple-carry, so its internal stages change in sequence after the triggering edge. This timing must be included when calculating the maximum operating frequency and when interpreting a carry output generated by the cascaded stages.
What is the difference between CD4024AK3 and CD4024?
The CD4024AK3 is the Harris Corporation 14-terminal PDSO ordering variant of the 7-bit CD4024 CMOS binary counter, while CD4024 denotes the broader base device family. According to the Harris product description, CD4024AK3 is a negative-edge-triggered, up-counting, asynchronous counter with parallel binary outputs. Package, qualification, and ordering details must be checked against the specific manufacturer datasheet before assigning a replacement.
Where can I download the CD4024AK3 datasheet PDF?
The CD4024AK3 datasheet can be accessed through the linked CD4024 PDF or the dedicated Octopart datasheet result for the Harris part. The CD4024 document identifies the device as a CMOS ripple-carry binary counter and divider. Use the Harris-specific ordering information for CD4024AK3 when confirming package, temperature grade, electrical limits, and pin assignments.
Where is the CD4024AK3 pinout located?
The CD4024AK3 pinout is located in the pin-description and terminal-assignment section of the manufacturer datasheet. The device uses 14 flat package terminals and includes clock, reset, carry, and seven binary-output functions. Use the exact CD4024AK3 terminal drawing when assigning PCB tracks because package families sharing the CD4024 function can use different physical outlines or terminal numbering.
Is CD4024AK3 suitable for frequency division?
The CD4024AK3 is suitable for frequency division because it provides seven binary stages and an asynchronous ripple-carry architecture. According to the manufacturer datasheet, each available output represents a successively divided version of the clock frequency. The actual division ratio and maximum usable input frequency depend on the selected output and the propagation delay accumulated through the cascaded stages.
How do I reset the CD4024AK3 counter?
The CD4024AK3 resets to its zero count through its dedicated reset input, which clears the seven binary output stages. According to the manufacturer datasheet, reset must be driven and released according to the specified timing requirements. Keep the reset trace short and away from high-impedance nodes so that noise cannot cause an unintended count state during sensitive timing sequences.
Can multiple CD4024AK3 counters be cascaded?
Multiple CD4024AK3 counters can be cascaded by using a terminal-count indication to clock the next counter, allowing the overall system to count beyond the seven-bit range of one device. According to the manufacturer datasheet, the counter uses an asynchronous ripple-carry architecture. Designers must account for cumulative propagation delay and include reset-control circuitry that initializes every counter in the chain simultaneously.
Where can I buy CD4024AK3, and what is its lead time?
Use the Request a Quote form on this page to ask for CD4024AK3 availability, current lead time, minimum order quantity, and orderable packaging. The commercial form routes the request without presenting a static unit price that could become outdated. Because this is a mature Harris Corporation logic product, procurement should confirm lifecycle status and whether any remaining stock is factory-packed or legacy inventory.
What is the price of CD4024AK3?
The current commercial price for CD4024AK3 is not stated on this page because it can change with quantity, availability, and condition. Use the Request a Quote form on this page to obtain a current quotation for the exact CD4024AK3 ordering code. For legacy inventory, specify whether reel, tube, tray, bulk, or another permitted delivery format is required before accepting the quotation.
Is CD4024AK3 currently in stock?
Current CD4024AK3 stock should be confirmed through the Request a Quote form on this page rather than assumed from an aggregator count. Availability can vary for legacy or obsolete logic devices, particularly when only distributor inventory remains. The quote request can specify quantity, target date, acceptable pack style, and inspection requirements to help determine whether the exact MPN can be supplied.
What can replace the CD4024AK3?
A valid CD4024AK3 replacement must preserve the 7-bit counting function, negative-edge clock behavior, 14-terminal logic interface, reset timing, carry behavior, and the physical PDSO footprint. According to the manufacturer datasheet, functional equivalence alone is insufficient because package and pin assignments must also match. Use the Request a Quote form for the exact legacy MPN, and request engineering review before approving any substitution.
Is the CD4024AK3 a drop-in replacement for another CD4024 variant?
The CD4024AK3 is a drop-in candidate only when the candidate has the same PDSO-14 footprint and identical terminal assignments. According to the Harris product description, the device is a 14-terminal, negative-edge-triggered, 7-bit counter, but related CD4024 order codes can differ in package construction or qualification. Compare pinouts, electrical limits, temperature grade, and reset timing before approving a board-level substitution.
When should I choose CD4024AK3 instead of a smaller CMOS counter?
Choose CD4024AK3 when a design requires seven simultaneously available binary outputs and negative-edge counting in a 14-terminal PDSO package. According to the manufacturer datasheet, its 7-bit capacity covers 128 basic states and its ripple-carry structure suits frequency-divider and sequencing roles. A smaller counter may be preferable when fewer states are required, but it may also use a different footprint or output count.
What are the key specifications engineers should know about CD4024AK3?
The key CD4024AK3 specifications are 7-bit asynchronous up-counting, 128 basic count states, negative-edge clock triggering, parallel binary outputs, CMOS logic, and a 14-terminal PDSO package. According to the Harris product description and manufacturer datasheet, the device also includes reset and carry functions. Supply voltage, operating temperature, maximum clock rate, and propagation-delay limits must be taken from the exact datasheet revision.
What is the best Harris Corporation equivalent for CD4024AK3?
The best Harris Corporation equivalent for CD4024AK3 is the ordering variant that matches its 7-bit counter function, 14-terminal PDSO footprint, terminal assignments, qualification, and electrical limits. According to the manufacturer datasheet, variants within the CD4024 family may use different package or temperature codes. Use the Request a Quote form for the exact MPN, then compare its manufacturer datasheet before treating it as a drop-in replacement.

بيانات مرجعية هندسية لـ CD4024AK3 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose CD4024AK3 when the design requires a 7-bit asynchronous up-counter with negative-edge triggering, 128 count states, parallel binary outputs, and a 14-terminal PDSO footprint. It is appropriate for frequency division, event counting, timing generation, and programmable sequencing. Choose another CD4024AK-series ordering code only after confirming that its package outline, pin assignments, qualification, electrical limits, and reset timing are identical. A different CD4024 package should not be treated as a drop-in replacement even when its counter logic matches. For designs that need strictly simultaneous binary outputs or faster settling between stages, a synchronous counter may be a better architectural choice, but it will not provide a direct board-level replacement. For new volume production, confirm lifecycle availability and obtain a quotation before committing the exact MPN to a long-running BOM.

المقارنة مع البدائل

المعامل هذا المنتج CD4024AK CD4024BK3 CD4024CK3 CD4024DK3 CD4024DP
Brand Harris Corporation Harris Corporation Harris Corporation Harris Corporation Harris Corporation Harris Corporation
Package PDSO-14 PDSO-14 PDSO-14 PDSO-14 PDSO-14 PDSO-14
Counter Width 7 bits 7 bits 7 bits 7 bits 7 bits 7 bits
Count States 128 states (0 to 127) 128 states (0 to 127) 128 states (0 to 127) 128 states (0 to 127) 128 states (0 to 127) 128 states (0 to 127)
Counting Mode Asynchronous, ripple-carry Asynchronous, ripple-carry Asynchronous, ripple-carry Asynchronous, ripple-carry Asynchronous, ripple-carry Asynchronous, ripple-carry
Clock Triggering Negative edge Negative edge Negative edge Negative edge Negative edge Negative edge
Count Direction Up Up Up Up Up Up
Logic Family 4000/14000/40000 CMOS series 4000/14000/40000 CMOS series 4000/14000/40000 CMOS series 4000/14000/40000 CMOS series 4000/14000/40000 CMOS series 4000/14000/40000 CMOS series
Number of Terminals 14 terminals 14 terminals 14 terminals 14 terminals 14 terminals 14 terminals

أبرز الفروقات

  • Provides seven visible binary stages in one counter (مقابلCD4024AK)
  • Negative-edge triggering supports defined falling-edge count updates (مقابلCD4024BK3)
  • Ripple-carry architecture supports frequency division and terminal-count detection (مقابلCD4024CK3)
  • Parallel outputs simplify direct binary-state observation (مقابلCD4024DK3)

ملاحظات التصميم

Do not assume that every CD4024 order code is physically interchangeable with CD4024AK3. Confirm the 14-terminal PDSO outline, pin numbering, temperature grade, supply limits, and reset timing for the exact candidate. Related CD4024 variants can differ in package construction or ordering suffix even though they retain the same 7-bit counter function.

The CD4024AK3 is an asynchronous ripple counter, so its outputs do not all change simultaneously. When a decoded state drives sensitive circuitry, include settling time for the accumulated counter delay and avoid sampling a parallel output immediately after the clock transition. Short output traces, stable clock rise and fall times, and a controlled reset waveform help prevent false or intermediate state recognition.

Place the power-decoupling capacitor close to the supply and ground terminals, and route clock and reset traces away from noisy switching nodes. Because this is a through-hole PDSO-14 device, preserve the package-specific lead spacing and avoid excessive mechanical stress during insertion. When several counters are cascaded, provide a common reset distribution path that initializes all stages together.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The legacy Harris Corporation CD4000-series product listing does not provide a complete compliance declaration. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status remain unknown.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

CD4024AK3 datasheet CD4024AK3 pinout CD4024AK3 datasheet pdf CD4024AK3 equivalent CD4024AK3 replacement CD4024AK3 cross reference CD4024AK3 vs CD4024AK CD4024AK3 PDSO14 footprint CD4024AK3 7-bit counter CD4024AK3 frequency divider CD4024AK3 price CD4024AK3 stock Harris Corporation CD4024AK3 CD4024AK3 application circuit

المكونات والمصطلحات ذات الصلة

Harris Corporation CD4024AK3 CD4024 CD4024AK CD4024BK3 CD4024CK3 CD4024DK3 CD4024DP binary counter asynchronous counter ripple-carry counter CMOS logic CD4000 series 7-bit counter negative-edge triggering parallel binary output frequency divider binary frequency division event counter state sequencing carry output reset input PDSO-14 logic IC digital counter
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر