CD4024AK3 - 7-Bit CMOS Binary Counter | Harris Corporation
MPN: CD4024AK3 ✗ پایان تولیدCD4024AK3 نمای کلی
A CMOS binary counter is a synchronous-state logic device that advances through a predetermined sequence when triggered by an external clock. The CD4024AK3 is an asynchronous ripple counter, meaning each internal stage transitions in sequence after the preceding stage. Its negative-edge clock triggering makes the count change on the falling transition of the clock signal, while the parallel output pins expose the current seven-bit count.
Key features include 7-bit counting capacity, 128 selectable states, negative-edge triggering, and operation as a single one-element counter element. The output count advances in the up direction from binary 0000000 through 1111111. A dedicated reset input initializes the counter, and the carry output provides an indication that the terminal count has been reached. These functions support binary-frequency division, programmable timing chains, and repeatable event sequencing.
The CD4000-series architecture uses CMOS logic, allowing operation from the same supply rail as the surrounding digital system while producing complementary outputs. Because the counter contains cascaded internal stages, propagation delay accumulates through the chain. Designers should include this accumulated delay when determining maximum clock frequency or when using the carry output to trigger downstream circuitry.
Typical applications include digital time-base generation, sequential industrial controls, test-equipment pulse counting, frequency division, repetitive-event indexing, and programmable control logic. The seven outputs can directly represent a binary state or feed multiplexers, decoders, display drivers, and memory address logic. Negative-edge triggering also allows several counters to be cascaded while maintaining predictable event timing.
For reliable implementation, connect unused inputs to defined logic levels, observe the power-supply limits and absolute maximum ratings in the manufacturer datasheet, and account for package-specific lead assignments. The reset path should be kept free from long traces or noisy nodes because it establishes the starting state for every counting cycle. Decoupling near the supply pins helps reduce logic noise and false transitions in cascaded arrangements.
This product reference combines the device architecture, package identity, practical design guidance, structured commercial inquiry, and verified source links into a concise engineering selection resource for counter and timing applications.
جایگزینهای drop-in برای CD4024AK3 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
CD4024AK
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
CD4024BK3
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
CD4024CK3
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
CD4024DK3
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
CD4024DP
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
CD4024AK3 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 7-bit asynchronous binary counter |
| Counter Element Count | 1 element |
| Counter Width | 7 bits |
| Count Direction | Up |
| Counting Sequence | 0 to 127 |
| Logic Technology | CMOS |
| Counting Mode | Asynchronous, ripple-carry |
| Clock Triggering | Negative edge |
| نوع خروجی | Parallel binary outputs |
| Number of Terminals | 14 terminals |
| Package Code | PDSO14 |
| Package Shape | Rectangular |
| Terminal Form | Flat |
| Series | 4000/14000/40000 CMOS series |
| نوع نصب | Through-hole |
راهنمای پیکربندی پین CD4024AK3 rectangular
پیکربندی پین برای CD4024AK3 (پکیج rectangular). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای CD4024AK3.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
CD4024AK3 مناسب است برای 6 کاربردs: Binary Frequency Divider, Programmable Event Sequencer, Digital Time-Base Generator, Industrial Control Stepper, Pulse and Repetition Counter, Test and Measurement Indexing.
Binary Frequency Divider
The CD4024AK3 is well suited to binary frequency division because it provides seven parallel counter stages, allowing a clock to be divided at 2, 4, 8, 16, 32, 64, or 128 ratios. The negative-edge trigger gives the device a defined switching point, while the seven outputs make each available division stage directly accessible. Because the counter is asynchronous and ripple-carry, the transition delay accumulates through the selected output stage. Designers should therefore use the manufacturer timing limits when establishing the maximum input frequency and should keep the selected output routing short to limit additional delay.
پیشنهادی
Programmable Event Sequencer
The CD4024AK3 can form the counting core of a programmable event sequencer because its seven parallel outputs represent 128 distinct states. Each state may enable a different output, gate a timing interval, or advance a control stage. Negative-edge triggering establishes a consistent count-change boundary, which is useful when the next state must begin on a falling clock transition. The design should include a controlled reset path to return every chain to a known state, and timing margins must account for the accumulated propagation delay of the asynchronous counter stages.
پیشنهادی
Digital Time-Base Generator
A CD4024AK3-based time-base generator can derive several related timing divisions from one incoming clock. Seven binary outputs allow coarse and fine timing taps to feed comparators, display drivers, or downstream counters without requiring seven separate oscillator channels. The part's 128-state count range provides useful resolution for repetitive measurement and control cycles. Timing accuracy is governed by the input oscillator, counter propagation delay, and output loading, so the circuit should use a stable reference and account for the datasheet limits of the selected counter stage.
پیشنهادی
Industrial Control Stepper
The CD4024AK3 can serve as the state counter in an industrial stepper that indexes discrete machine positions. Its seven parallel outputs allow each position to control a decoder, relay driver, valve, or actuator-enable path. Up-counting and negative-edge triggering provide a straightforward progression from one defined state to the next. The asynchronous ripple architecture requires consideration of transition settling time, particularly when an actuator must not change during counter rollover. A synchronized reset and adequate output timing margin help prevent unintended motion.
پیشنهادی
Pulse and Repetition Counter
The CD4024AK3 can count repeated events in pulse-generation, batch-processing, or test systems where an operator needs a binary indication of accumulated activity. The 7-bit output range covers 0 through 127 events before terminal count, and the dedicated carry output provides a convenient indication for extending the count or triggering a completion event. Negative-edge clocking can also reject some signal shapes by selecting an appropriate triggering source. The input network must provide clean transitions because generated or mechanical events can cause multiple counts when no hysteresis or conditioning is present.
پیشنهادی
Test and Measurement Indexing
The CD4024AK3 is useful in test and measurement equipment as a repeatable index for stimulus patterns, measurement sequences, or channel-selection logic. Its seven visible outputs can represent a measurement step, and negative-edge triggering gives the system a precise point at which to update the associated test vector. Since the counter is ripple-based, the selected output should not be treated as changing instantaneously with the clock edge. Allow the worst-case accumulated propagation delay before sampling the counter, and synchronize external control signals when repeatable test timing is critical.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای CD4024AK3 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | CD4024AK | CD4024BK3 | CD4024CK3 | CD4024DK3 | CD4024DP |
|---|---|---|---|---|---|---|
| Brand | Harris Corporation | Harris Corporation | Harris Corporation | Harris Corporation | Harris Corporation | Harris Corporation |
| Package | PDSO-14 | PDSO-14 | PDSO-14 | PDSO-14 | PDSO-14 | PDSO-14 |
| Counter Width | 7 bits | 7 bits | 7 bits | 7 bits | 7 bits | 7 bits |
| Count States | 128 states (0 to 127) | 128 states (0 to 127) | 128 states (0 to 127) | 128 states (0 to 127) | 128 states (0 to 127) | 128 states (0 to 127) |
| Counting Mode | Asynchronous, ripple-carry | Asynchronous, ripple-carry | Asynchronous, ripple-carry | Asynchronous, ripple-carry | Asynchronous, ripple-carry | Asynchronous, ripple-carry |
| Clock Triggering | Negative edge | Negative edge | Negative edge | Negative edge | Negative edge | Negative edge |
| Count Direction | Up | Up | Up | Up | Up | Up |
| Logic Family | 4000/14000/40000 CMOS series | 4000/14000/40000 CMOS series | 4000/14000/40000 CMOS series | 4000/14000/40000 CMOS series | 4000/14000/40000 CMOS series | 4000/14000/40000 CMOS series |
| Number of Terminals | 14 terminals | 14 terminals | 14 terminals | 14 terminals | 14 terminals | 14 terminals |
تفاوتهای کلیدی
- Provides seven visible binary stages in one counter (در مقابلCD4024AK)
- Negative-edge triggering supports defined falling-edge count updates (در مقابلCD4024BK3)
- Ripple-carry architecture supports frequency division and terminal-count detection (در مقابلCD4024CK3)
- Parallel outputs simplify direct binary-state observation (در مقابلCD4024DK3)
یادداشتهای طراحی
Do not assume that every CD4024 order code is physically interchangeable with CD4024AK3. Confirm the 14-terminal PDSO outline, pin numbering, temperature grade, supply limits, and reset timing for the exact candidate. Related CD4024 variants can differ in package construction or ordering suffix even though they retain the same 7-bit counter function.
The CD4024AK3 is an asynchronous ripple counter, so its outputs do not all change simultaneously. When a decoded state drives sensitive circuitry, include settling time for the accumulated counter delay and avoid sampling a parallel output immediately after the clock transition. Short output traces, stable clock rise and fall times, and a controlled reset waveform help prevent false or intermediate state recognition.
Place the power-decoupling capacitor close to the supply and ground terminals, and route clock and reset traces away from noisy switching nodes. Because this is a through-hole PDSO-14 device, preserve the package-specific lead spacing and avoid excessive mechanical stress during insertion. When several counters are cascaded, provide a common reset distribution path that initializes all stages together.
اطلاعات انطباق
The legacy Harris Corporation CD4000-series product listing does not provide a complete compliance declaration. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status remain unknown.