CD4029BD3 - 4-Bit CMOS Up/Down Counter | Harris
MPN: CD4029BD3 ✗ انتهى عمره الإنتاجيCD4029BD3 نظرة عامة
A counter IC is a synchronous state element that advances its binary output according to clock and control signals. The CD4029BD3 belongs to the CD4000 CMOS logic family, combining a 4-bit counting element, parallel load capability, and separate up/down control in one integrated package. Its principal function is to maintain a binary count that can be loaded, incremented, or decremented according to the external logic state.
The CD4029BD3 is identified as a positive-edge counter with a 4-bit count section. Positive-edge operation means the counting state changes in response to the active clock transition rather than a change in clock level. Parallel load control allows the counter to receive an initial binary value, while the direction input determines whether subsequent clock events increment or decrement that value. These features support repeatable state-machine and event-counting implementations.
Because it is part of the CD4000 CMOS logic series, the CD4029BD3 is designed for low-power digital operation and operation from a single supply. Its family architecture supports complementary binary and decade counting applications through external logic and wiring. The 16-CDIP construction is mechanically distinct from surface-mount variants, so replacement decisions must account for lead pitch, insertion geometry, row spacing, and thermal requirements rather than function alone.
Typical uses include industrial sequence controllers, programmable event counters, machine-control timing modules, test and measurement counters, and digital systems requiring reversible binary counting. The part can also serve as the counting element in frequency-divider or state-advance arrangements when the surrounding logic defines the permitted count range and direction behavior.
PCB implementation should preserve the manufacturer-defined clock and control timing, route sensitive counter inputs away from noisy switching nodes, and provide a stable ground reference. Because legacy CD4000 parts are commonly offered in through-hole ceramic packages, check mechanical tolerances and connector accessibility before substituting a molded-plastic or surface-mount implementation. The counter’s operating voltage, current, temperature range, and timing limits must be confirmed against the appropriate family documentation.
بدائل مباشرة لـ CD4029BD3 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع CD4029BD3 (نفس عامل الشكل والبصمة) — يختلف في Logic Family, Counter Type, Package, Product Type.
CD4029BD
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←CD4029BE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MC14029B
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
CD4029BD3 الحدود القصوى والخصائص الكهربائية
| Counter Type | 4-bit binary up/down counter |
| Counting Elements | 1 element |
| Count Width | 4 bits |
| Clock Edge | Positive edge |
| Logic Family | CD4000 CMOS |
| العلبة | 16-CDIP |
| نوع التركيب | Through-hole |
دليل تكوين أطراف CD4029BD3 16-cdip
تكوين الأطراف لـ CD4029BD3 (حزمة 16-cdip). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CD4029BD3.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
CD4029BD3 مناسب لـ 6 التطبيقs: Industrial Sequence Control, Programmable Event Counter, Frequency Divider and Timing, Digital Test Equipment, Machine Position Indexing, Legacy Control Board Repair.
Industrial Sequence Control
The CD4029BD3 is suitable for the counting state in an industrial sequence controller because it combines a 4-bit binary count, selectable up/down direction, positive-edge clocking, and preset capability. Its counter state can represent a machine step, accumulated event count, or completed production quantity. When used in a control loop, the direction input changes according to the active sequence phase, while the preset and load paths establish repeatable boundaries. The 16-CDIP format also supports serviceable through-hole control boards. Before deployment, verify the supply limits, clock frequency, output timing, and temperature grade against the applicable CD4029B documentation.
موصى به
Programmable Event Counter
The CD4029BD3 can implement a programmable event counter by applying pulses to its clock input and using the direction control to count toward a chosen endpoint. A 4-bit count provides 16 binary states, making the device appropriate for batching, indexing, or repeatable task counts rather than unrestricted high-range counting. The positive-edge trigger allows external pulses to advance the state once per valid transition. Preset and parallel-load behavior can initialize the counter for each new batch. In an industrial panel, use the 16-CDIP footprint and stable supply bypassing, and confirm minimum clock pulse width and transition timing for the selected operating voltage.
موصى به
Frequency Divider and Timing
The CD4029BD3 can form the counting element of a programmable divider or timing chain when external decode logic defines when the output is enabled. Its 4-bit count allows division by a selected power-of-two interval or a decoded modulus, while the load and preset inputs can restart the sequence at a defined boundary. This arrangement is useful in legacy test equipment, repetitive timing generators, and pulse-distribution modules. The key design consideration is that the CD4029BD3 is a positive-edge counter, so the clock waveform must provide clean transitions and meet the family timing limits. Confirm maximum operating frequency and propagation delay at the actual supply voltage.
موصى به
Digital Test Equipment
The CD4029BD3 is appropriate for legacy digital test and measurement modules that count stimulus cycles, index vector positions, or divide a reference clock. Positive-edge counting makes the device deterministic when the source has clean transitions, and the 4-bit output provides four observable state bits for decoding instrument commands. The through-hole 16-CDIP package is advantageous when repairing older fixtures with accessible plated-through-hole boards and socketed or soldered legacy layouts. Designers should compare maximum clock frequency, output rise and fall times, and supply-current requirements with the test system’s existing logic levels. Slow or noisy source signals may require conditioning before entering the counter.
موصى به
Machine Position Indexing
The CD4029BD3 can provide a simple 16-position indexing function in legacy machine-control equipment when encoder or switch events arrive as clean pulses. The binary outputs identify the current index, and the direction input allows the count to track forward or reverse motion without changing the counter hardware. A preset value can establish an origin after initialization or a homing event. This application favors the through-hole CDIP package because service technicians can replace or socket the counter without redesigning a surface-mount layout. Reliability depends on debouncing mechanical inputs, preventing switch bounce from producing extra counts, and verifying timing margin at the actual supply voltage and ambient temperature.
موصى به
Legacy Control Board Repair
The CD4029BD3 is particularly useful for repairing legacy industrial control boards that use a 16-CDIP CMOS counter. A compatible replacement must preserve the board’s lead pattern, pin numbering, logic levels, and timing behavior; matching the counter function alone is insufficient. The through-hole package supports conventional rework methods and reduces the need for complex adapters. Before installation, compare the original and replacement datasheets for supply voltage, input thresholds, output drive, clock-rate limits, and temperature range. If the original part used a ceramic package for thermal or qualification reasons, retain that requirement rather than accepting an unqualified molded-plastic alternative without engineering review.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ CD4029BD3 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | CD4029BD | CD4029BE | MC14029B |
|---|---|---|---|---|
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Brand | Harris Corporation | Harris Corporation | Texas Instruments | onsemi |
| Counter Type | Binary up/down counter | Binary up/down counter | Binary up/down counter | Binary up/down counter |
| Count Width | 4 bits | 4 bits | 4 bits | 4 bits |
| Counting Elements | 1 element | 1 element | 1 element | 1 element |
| Clock Edge | Positive edge | Positive edge | Positive edge | Positive edge |
| Logic Family | CD4000 CMOS | CD4000 CMOS | CD4000 CMOS | CD4000 CMOS |
أبرز الفروقات
- Legacy Harris 16-CDIP identity (مقابلCD4029BE)
- Direct positive-edge up/down counting (مقابلMC14029B)
- Presettable state control (مقابلCD4029BD)
ملاحظات التصميم
Do not substitute a CD4029-family device based only on the counter description. Confirm the complete 16-pin numbering, clock edge, load polarity, preset polarity, clear behavior, direction input, supply range, and output timing. The “D3” suffix may distinguish package construction or qualification, so a molded-plastic alternative should be reviewed before it is installed in a board designed around the original ceramic CDIP.
Treat the clock, direction, load, and preset inputs as timing-sensitive control paths. Keep them away from high-current switching nodes, provide a low-impedance ground reference, and place local supply bypassing close to the counter. Mechanical switch or encoder contacts should be debounced externally so contact bounce cannot create unintended positive clock edges and advance the 4-bit count more than once.
Preserve the 16-CDIP hole pattern, lead pitch, row spacing, and connector clearance when repairing or modernizing a board. A functional surface-mount counter may require a new footprint and level translation because its pin order and electrical characteristics can differ. Before installation, compare the physical outline with the existing board and verify that the replacement’s package pins do not interfere with adjacent through-hole leads.
معلومات الامتثال
No RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact CD4029BD3 ordering code appears in the available product information.