Harris Corporation

CD4029BD3 - 4-Bit CMOS Up/Down Counter | Harris

MPN: CD4029BD3 ✗ जीवन की समाप्ति
16-CDIP Package Positive edge Speed
न्यूनतम ऑर्डर मात्रा: 1 |

CD4029BD3 अवलोकन

The Harris CD4029BD3 is a 4-bit CMOS presettable binary up/down counter IC with one counting element, positive-edge clock operation, and a 16-pin ceramic dual in-line package. It is designed to count upward or downward under control of a dedicated direction input, making it suitable for sequencing, timing, digital control, and industrial logic systems.

A counter IC is a synchronous state element that advances its binary output according to clock and control signals. The CD4029BD3 belongs to the CD4000 CMOS logic family, combining a 4-bit counting element, parallel load capability, and separate up/down control in one integrated package. Its principal function is to maintain a binary count that can be loaded, incremented, or decremented according to the external logic state.

The CD4029BD3 is identified as a positive-edge counter with a 4-bit count section. Positive-edge operation means the counting state changes in response to the active clock transition rather than a change in clock level. Parallel load control allows the counter to receive an initial binary value, while the direction input determines whether subsequent clock events increment or decrement that value. These features support repeatable state-machine and event-counting implementations.

Because it is part of the CD4000 CMOS logic series, the CD4029BD3 is designed for low-power digital operation and operation from a single supply. Its family architecture supports complementary binary and decade counting applications through external logic and wiring. The 16-CDIP construction is mechanically distinct from surface-mount variants, so replacement decisions must account for lead pitch, insertion geometry, row spacing, and thermal requirements rather than function alone.

Typical uses include industrial sequence controllers, programmable event counters, machine-control timing modules, test and measurement counters, and digital systems requiring reversible binary counting. The part can also serve as the counting element in frequency-divider or state-advance arrangements when the surrounding logic defines the permitted count range and direction behavior.

PCB implementation should preserve the manufacturer-defined clock and control timing, route sensitive counter inputs away from noisy switching nodes, and provide a stable ground reference. Because legacy CD4000 parts are commonly offered in through-hole ceramic packages, check mechanical tolerances and connector accessibility before substituting a molded-plastic or surface-mount implementation. The counter’s operating voltage, current, temperature range, and timing limits must be confirmed against the appropriate family documentation.

के लिए ड्रॉप-इन विकल्प CD4029BD3 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं CD4029BD3 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Logic Family, Counter Type, Package, Product Type.

Texas Instruments
Logic Family: CD4000 CMOS series
Product Type: Presettable binary/decade up/down counter
इसके साथ तुलना करें CD4029BD3 →
Texas Instruments
Logic Family: CD4000 series CMOS
Counter Type: Binary / BCD decade up or down counter
Package: PDIP-16 (N) through-hole
इसके साथ तुलना करें CD4029BD3 →

CD4029BD

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Texas Instruments
📦 16-CDIP
Presettable binary/decade up/down counter · CD4000 CMOS series · 3 V to 18 V · 11 MHz · Rising edge · Binary and decade up/down counting · User-programmable count state · 1 counter element

कीमत के लिए संपर्क करें

डेटाशीट देखें →

CD4029BE

✅ ड्रॉप-इन
Texas Instruments
📦 16-CDIP
CMOS Presettable Up/Down Counter · Texas Instruments · CD4000 series CMOS · Binary / BCD decade up or down counter · 1 counter element · 4 bit · 3 V to 18 V · 11 MHz

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC14029B

✅ ड्रॉप-इन
📦 16-CDIP
Same 4-bit up/down-counter function with 0% count-width change; voltage, temperature, timing, and exact pin compatibility require verification

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

CD4029BD3 Maximum Ratings और Electrical Characteristics

Counter Type 4-bit binary up/down counter
Counting Elements 1 element
Count Width 4 bits
Clock Edge Positive edge
Logic Family CD4000 CMOS
पैकेज 16-CDIP
माउंटिंग प्रकार Through-hole

CD4029BD3 16-cdip पिन कॉन्फ़िगरेशन गाइड

CD4029BD3 (16-cdip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

CD4029BD3 के लिए 16-cdip पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: CD4029BD3.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

CD4029BD3 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sequence Control, Programmable Event Counter, Frequency Divider and Timing, Digital Test Equipment, Machine Position Indexing, Legacy Control Board Repair.

🏭

Industrial Sequence Control

The CD4029BD3 is suitable for the counting state in an industrial sequence controller because it combines a 4-bit binary count, selectable up/down direction, positive-edge clocking, and preset capability. Its counter state can represent a machine step, accumulated event count, or completed production quantity. When used in a control loop, the direction input changes according to the active sequence phase, while the preset and load paths establish repeatable boundaries. The 16-CDIP format also supports serviceable through-hole control boards. Before deployment, verify the supply limits, clock frequency, output timing, and temperature grade against the applicable CD4029B documentation.

🔧

Programmable Event Counter

The CD4029BD3 can implement a programmable event counter by applying pulses to its clock input and using the direction control to count toward a chosen endpoint. A 4-bit count provides 16 binary states, making the device appropriate for batching, indexing, or repeatable task counts rather than unrestricted high-range counting. The positive-edge trigger allows external pulses to advance the state once per valid transition. Preset and parallel-load behavior can initialize the counter for each new batch. In an industrial panel, use the 16-CDIP footprint and stable supply bypassing, and confirm minimum clock pulse width and transition timing for the selected operating voltage.

⏱️

Frequency Divider and Timing

The CD4029BD3 can form the counting element of a programmable divider or timing chain when external decode logic defines when the output is enabled. Its 4-bit count allows division by a selected power-of-two interval or a decoded modulus, while the load and preset inputs can restart the sequence at a defined boundary. This arrangement is useful in legacy test equipment, repetitive timing generators, and pulse-distribution modules. The key design consideration is that the CD4029BD3 is a positive-edge counter, so the clock waveform must provide clean transitions and meet the family timing limits. Confirm maximum operating frequency and propagation delay at the actual supply voltage.

🖥️

Digital Test Equipment

The CD4029BD3 is appropriate for legacy digital test and measurement modules that count stimulus cycles, index vector positions, or divide a reference clock. Positive-edge counting makes the device deterministic when the source has clean transitions, and the 4-bit output provides four observable state bits for decoding instrument commands. The through-hole 16-CDIP package is advantageous when repairing older fixtures with accessible plated-through-hole boards and socketed or soldered legacy layouts. Designers should compare maximum clock frequency, output rise and fall times, and supply-current requirements with the test system’s existing logic levels. Slow or noisy source signals may require conditioning before entering the counter.

⚙️

Machine Position Indexing

The CD4029BD3 can provide a simple 16-position indexing function in legacy machine-control equipment when encoder or switch events arrive as clean pulses. The binary outputs identify the current index, and the direction input allows the count to track forward or reverse motion without changing the counter hardware. A preset value can establish an origin after initialization or a homing event. This application favors the through-hole CDIP package because service technicians can replace or socket the counter without redesigning a surface-mount layout. Reliability depends on debouncing mechanical inputs, preventing switch bounce from producing extra counts, and verifying timing margin at the actual supply voltage and ambient temperature.

🧩

Legacy Control Board Repair

The CD4029BD3 is particularly useful for repairing legacy industrial control boards that use a 16-CDIP CMOS counter. A compatible replacement must preserve the board’s lead pattern, pin numbering, logic levels, and timing behavior; matching the counter function alone is insufficient. The through-hole package supports conventional rework methods and reduces the need for complex adapters. Before installation, compare the original and replacement datasheets for supply voltage, input thresholds, output drive, clock-rate limits, and temperature range. If the original part used a ceramic package for thermal or qualification reasons, retain that requirement rather than accepting an unqualified molded-plastic alternative without engineering review.

अनुशंसित उत्पादों का सारांश

CD4029B CD4000-series counter family उपयोग में: Industrial Sequence Control, Programmable Event Counter, Frequency Divider and Timing, Digital Test Equipment CD4029BD/3 Closely related Harris ordering designation उपयोग में: Industrial Sequence Control, Frequency Divider and Timing CD4029BD3 Harris Corporation उपयोग में: Programmable Event Counter, Digital Test Equipment CD4029BD Texas Instruments उपयोग में: Machine Position Indexing, Legacy Control Board Repair CD4029BE Texas Instruments उपयोग में: Machine Position Indexing MC14029B Cross-reference candidate for a compatible CDIP version उपयोग में: Legacy Control Board Repair
What is the CD4029BD3?
The CD4029BD3 is a Harris Corporation 4-bit CMOS presettable up/down counter IC packaged in a 16-CDIP. The manufacturer product information identifies one counting element and positive-edge operation. According to the Texas Instruments CD4029B product page, the CD4029B family is a versatile CMOS up/down counter used for digital counting and control applications.
What is the operating voltage of CD4029BD3?
The exact CD4029BD3 supply-voltage limits must be confirmed from the applicable Harris or CD4029B family documentation before the device is powered. The verified product information confirms a 16-CDIP package, 4-bit counting section, one counter element, and positive-edge operation, but it does not state a numerical supply range. Request the family datasheet and validate its voltage, noise, and timing limits against your circuit.
Where can I download the CD4029BD3 datasheet PDF?
The CD4029BD3 documentation is most reliably obtained through the CD4029B manufacturer resource at Texas Instruments or through the CD4029BD/3 datasheet listing identified for the Harris part. The manufacturer product page confirms the CD4029B family description, while the CD4029BD/3 listing explicitly associates the Harris orderable suffix with a datasheet PDF. Always match the voltage grade and package ordering codes before releasing production files.
Where is the pinout for CD4029BD3?
Use the CD4029B or Harris CD4029BD/3 pin-description table for the 16-CDIP CD4029BD3 rather than inferring connections from the counter block diagram. The available catalog result confirms a 16-CDIP package but does not publish the complete numbered pin list. Check clock, up/down, load, preset, clear, output, carry, supply, and ground assignments before assigning PCB nets or probing the device.
How does the CD4029BD3 count up and down?
The CD4029BD3 counts upward or downward according to its direction-control input and advances on the active positive clock edge. The verified listing identifies it as a binary up/down counter with one 4-bit counting element. Its parallel-load function allows an initial binary state to be established, after which clock edges and the direction input determine whether the stored count increments or decrements.
Is CD4029BD3 suitable for industrial counter applications?
The CD4029BD3 is functionally suitable for industrial counting and control systems when its supply, temperature, timing, and noise specifications meet the equipment requirements. Its 4-bit positive-edge up/down counting and preset capability are useful for repeatable machine events and programmable sequences. Because the numerical operating limits are not stated in the product listing, validate those requirements against the applicable manufacturer datasheet before qualification.
What can replace the CD4029BD3?
A replacement must be a pin-compatible 16-CDIP 4-bit positive-edge up/down counter with compatible control logic and confirmed electrical limits. CD4029BD, CD4029BE, and MC14029B are relevant CD4000-family candidates, but each substitution requires checking the exact pin arrangement, package dimensions, voltage range, temperature grade, and timing behavior. Do not assume that a CD4029-family suffix change preserves every qualification or environmental characteristic.
Is CD4029BD3 the same as CD4029BE?
The CD4029BD3 and CD4029BE belong to the same functional 4-bit up/down counter family, but they are not necessarily identical as orderable devices. The target CD4029BD3 is listed in a 16-CDIP ceramic package, whereas suffix codes can indicate different package construction, temperature grade, or qualification. Compare the numbered pinout and electrical ratings before using CD4029BE as a direct replacement.
CD4029BD3 vs CD4029BD - which is the better replacement choice?
Choose CD4029BD only when its 16-CDIP mechanical form and electrical ratings match the original CD4029BD3 exactly. Both are associated with the 4-bit CD4029 up/down-counter family, but the target ordering code includes the “D3” suffix and a ceramic CDIP construction. The decisive checks are physical fit, pin compatibility, operating-temperature range, supply limits, and clock timing rather than counter function alone.
CD4029BD3 vs MC14029B - can MC14029B replace it?
MC14029B can be considered as a functional CD4000-series alternative if its selected package is a 16-CDIP and its pin and electrical characteristics match the CD4029BD3. The counter function remains a 4-bit positive-edge up/down counter, but operating-temperature grade, supply range, propagation timing, and exact lead geometry require confirmation. Perform a documented pin-by-pin and timing comparison before treating it as a drop-in replacement.
When should I choose CD4029BD3 over a surface-mount counter?
Choose CD4029BD3 when an existing through-hole 16-CDIP board must be serviced without changing its footprint and when the original’s electrical and environmental ratings are required. A surface-mount counter may be preferable for new compact designs, but changing technologies can alter pin ordering, land pattern, timing behavior, and thermal performance. For legacy repairs, mechanical and electrical equivalence should take priority over package size.
What is the best Harris equivalent for CD4029BD3?
CD4029BD is the closest Harris-family candidate because it retains the CD4029 4-bit up/down-counter function and can be offered in a 16-pin dual in-line configuration. It should be selected only after confirming that its suffix defines the required package and temperature grade. If a direct legacy-grade part is not obtainable, use a documented cross-reference to CD4029BE or MC14029B and validate the full interface and timing requirements.
How much does the CD4029BD3 cost?
Current commercial terms for the CD4029BD3 should be requested through the Request a Quote form on this page. The available catalog records do not contain a qualifying quantity-break price table for the exact MPN, and legacy availability can vary by condition and original manufacturer. Submit the required quantity, package preference, condition, and target date so procurement can confirm a current quotation and lead time.
Is CD4029BD3 in stock and what is its lead time?
Current stock and lead time for CD4029BD3 must be confirmed through the Request a Quote form on this page. A legacy 16-CDIP counter may be available only as a remaining factory or distributor stock item, so quantity and delivery requirements can affect the response. Include the number of pieces needed and whether an original or equivalent part is acceptable.
What are the key specifications engineers should know about CD4029BD3?
The confirmed core specifications are a 4-bit binary counting section, one counter element, positive-edge operation, CD4000 CMOS logic, and a 16-CDIP through-hole package. The product is described as a presettable up/down counter suitable for digital counting and control. Supply voltage, current, clock-rate limits, temperature range, propagation delay, and output drive are not stated in the verified listing and must be taken from the applicable family datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा CD4029BD3 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the CD4029BD3 for legacy repair or replication when the board requires a 16-CDIP footprint, positive-edge 4-bit up/down counting, and compatibility with the original Harris ordering characteristics. CD4029BD is the closest same-manufacturer family candidate, but its suffix must be checked for package construction and temperature grade. Consider CD4029BE when its electrical and environmental ratings meet the design and the mechanical package is confirmed as compatible. MC14029B is a cross-brand option only after checking pin arrangement, supply voltage, timing, and temperature requirements. For new designs, consider a current CMOS counter with a verified modern package rather than assuming that the legacy CD4000 timing and electrical characteristics are interchangeable.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद CD4029BD CD4029BE MC14029B
Package 16-CDIP 16-CDIP 16-CDIP 16-CDIP
Brand Harris Corporation Harris Corporation Texas Instruments onsemi
Counter Type Binary up/down counter Binary up/down counter Binary up/down counter Binary up/down counter
Count Width 4 bits 4 bits 4 bits 4 bits
Counting Elements 1 element 1 element 1 element 1 element
Clock Edge Positive edge Positive edge Positive edge Positive edge
Logic Family CD4000 CMOS CD4000 CMOS CD4000 CMOS CD4000 CMOS

मुख्य विशेषताएँ

  • Legacy Harris 16-CDIP identity (बनामCD4029BE)
  • Direct positive-edge up/down counting (बनामMC14029B)
  • Presettable state control (बनामCD4029BD)

डिज़ाइन नोट्स

Do not substitute a CD4029-family device based only on the counter description. Confirm the complete 16-pin numbering, clock edge, load polarity, preset polarity, clear behavior, direction input, supply range, and output timing. The “D3” suffix may distinguish package construction or qualification, so a molded-plastic alternative should be reviewed before it is installed in a board designed around the original ceramic CDIP.

Treat the clock, direction, load, and preset inputs as timing-sensitive control paths. Keep them away from high-current switching nodes, provide a low-impedance ground reference, and place local supply bypassing close to the counter. Mechanical switch or encoder contacts should be debounced externally so contact bounce cannot create unintended positive clock edges and advance the 4-bit count more than once.

Preserve the 16-CDIP hole pattern, lead pitch, row spacing, and connector clearance when repairing or modernizing a board. A functional surface-mount counter may require a new footprint and level translation because its pin order and electrical characteristics can differ. Before installation, compare the physical outline with the existing board and verify that the replacement’s package pins do not interfere with adjacent through-hole leads.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact CD4029BD3 ordering code appears in the available product information.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

CD4029BD3 datasheet CD4029BD3 pinout CD4029BD3 datasheet pdf CD4029BD3 16-CDIP CD4029BD3 equivalent CD4029BD3 replacement CD4029BD3 drop-in replacement CD4029BD3 cross reference CD4029BD3 vs CD4029BE CD4029BD3 price CD4029BD3 stock Harris CD4029BD3 CD4029BD3 up down counter CD4029BD3 industrial counter

संबंधित कंपोनेंट्स और शब्द

Harris Corporation CD4029BD3 CD4029B CD4029BD CD4029BE MC14029B CD4000 CMOS logic family CMOS 4-bit binary up/down counter positive-edge counter presettable counter counter IC logic IC digital logic semiconductor 16-CDIP dual in-line package through-hole package industrial sequence control event counting frequency division digital test equipment machine indexing legacy control board repair
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें