onsemi

CD4053BCN - Triple 2:1 CMOS Multiplexer | onsemi

MPN: CD4053BCN ✓ نشط
240 ohms Rds(on) PDIP-16 Package
الحد الأدنى للطلب: 1 |

CD4053BCN نظرة عامة

The onsemi CD4053BCN is a triple single-pole double-throw CMOS analog switch and multiplexer with three selectable 2:1 circuits, an on-resistance of 240 ohms, and a 16-pin PDIP package. Its three-channel architecture lets one device route three related signal paths while sharing common control inputs, reducing component count in signal-routing designs.

An analog multiplexer is an interface IC that connects one of multiple internal signal paths to a shared output. The CD4053BCN belongs to the CMOS logic family and uses digital select inputs to control analog signal routing. This places it within the hierarchy of multiplexer, analog switch, interface IC, and semiconductor. The stated on-resistance of 240 ohms is important when the switched signal is sourced from a relatively high-impedance sensor or measurement node.

The principal device features are three independent 2:1 circuits, a 240-ohm on-resistance, CMOS construction, and a 16-pin PDIP package. Grouping three circuits into one package can simplify boards that repeatedly route analog, control, or instrumentation signals. The DIP-16 mechanical format also supports through-hole assembly, prototyping, repair, and applications where a socketed component is preferred.

Internally, the CD4053BCN combines analog switching with CMOS control logic. Its common select architecture is useful when several related channels should change together, although the exact truth-table relationship should be verified in the manufacturer datasheet before assigning control states. Because it is an analog switch rather than a digital bus transceiver, the selected signal must remain within the device's permitted voltage and current limits.

Typical uses include analog sensor selection, test-point routing, signal multiplexing in instrumentation, controlled sharing of multiple signal sources, and embedded measurement systems. A three-channel arrangement can also support phase, channel, or polarity selection where the routed signals are compatible with the switch's electrical characteristics and switching requirements.

PCB design should reserve the full 16-pin PDIP footprint and route high-impedance or fast-changing signals away from adjacent digital select lines. Keep input and output traces short, provide a stable ground reference, and follow the manufacturer datasheet for unused inputs, supply decoupling, and maximum signal excursion. Confirm operating voltage and temperature limits before committing to the device in production equipment.

بدائل مباشرة لـ CD4053BCN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع CD4053BCN (نفس عامل الشكل والبصمة) — يختلف في RoHS Status.

Texas Instruments
RoHS Status: unknown
قارن مع CD4053BCN →

CD4053BE

✅ بديل مباشر
Texas Instruments
📦 PDIP-16
Triple 2:1 SPDT analog multiplexer/demultiplexer with logic-level conversion · 3 circuits · 2:1 SPDT per channel · 20 V · 240 ohm · Supported · -55 °C to +125 °C · 16-pin PDIP

تواصل لمعرفة السعر

عرض ورقة البيانات ←

CD4053BEE4

✅ بديل مباشر
📦 PDIP-16
0% change in the identified 3-function, 2-channel, single-ended, PDIP-16 attributes; exact suffix-specific rating and qualification differences require comparison

📋 بديل مرجعي (غير موجود في الكتالوج)

MC74HC4053ANG

✅ بديل مباشر
📦 PDIP-16
0% change in the identified 3-function, 2-channel, single-ended, PDIP-16 attributes; HC-series voltage-level and switching characteristics may differ

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4053BCN المواصفات

Multiplexer Type 3-circuit, single-ended 2:1 analog switch
Number of Circuits 3 circuits
Number of Channels 2 channels per circuit
On-Resistance 240 ohms
Logic Family CMOS
Signal Type Single-ended
Package Type PDIP-16
Package Description 0.3-inch plastic DIP-16, MS-001
عدد الأطراف 16 pins
نوع التركيب Through-hole
حالة RoHS Compliant

دليل تكوين أطراف CD4053BCN 0.3-inch plastic dip-16, ms-001

تكوين الأطراف لـ CD4053BCN (حزمة 0.3-inch plastic dip-16, ms-001). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 0.3-inch plastic dip-16, ms-001 لـ CD4053BCN

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CD4053BCN.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

CD4053BCN مناسب لـ 6 التطبيقs: Analog Sensor Signal Multiplexing, Test and Measurement Signal Routing, Control Signal Routing, Industrial Equipment Interface Switching, Data Acquisition Channel Selection, Data Logger and Monitoring Systems.

🧩

Analog Sensor Signal Multiplexing

The CD4053BCN is suitable for selecting among related sensor signals when a shared processing channel is required. Its three 2:1 circuits allow three pairs of signal routes to be controlled from one package, while the 240-ohm on-resistance provides a defined series resistance in the selected path. The device is most appropriate for sensor outputs whose levels remain within the manufacturer's operating limits and whose source impedance does not make switch resistance excessive. Use a low-noise buffer after the multiplexer when the sensor impedance is high or the measurement requires very low offset error.

🖥️

Test and Measurement Signal Routing

The CD4053BCN can route three pairs of measurement signals to a common instrument or processing input, reducing the number of discrete switches required on a test board. Its stated 240-ohm on-resistance must be included in the signal-path attenuation budget, especially when driving a high-impedance measurement front end. The PDIP-16 through-hole package is convenient for prototype fixtures and socketed laboratory hardware. Confirm switching time, off-isolation, leakage, and allowable input excursion in the manufacturer datasheet before using it for precision measurements.

⚡

Control Signal Routing

The CD4053BCN can select between two related control signals in three independent channels when the routed outputs are compatible with its CMOS switch behavior. Grouping the routing functions in one PDIP-16 package reduces board area and simplifies control of repeated channels. This approach is useful in small control systems where a microcontroller or logic device must choose one of two command sources, polarity sets, or operating modes. The selected signals should remain within the allowed voltage range, and the truth table should be checked carefully when one control action changes more than one path.

🏭

Industrial Equipment Interface Switching

The three 2:1 circuits of the CD4053BCN can support signal isolation routing between a controller and multiple external interface lines in industrial equipment. Its 240-ohm on-resistance is modest for many logic-level or medium-impedance industrial signals, allowing one component to replace several single switch channels. Through-hole assembly also supports repairable control boards and panel-wired equipment. The design must still account for transients, ground offsets, noise coupling, and the device's permitted signal excursion, none of which should be inferred solely from the package description.

📺

Data Acquisition Channel Selection

The CD4053BCN can select paired inputs from a multi-channel data-acquisition front end before conversion or processing. Three independently addressed 2:1 sections make it practical to bring several related nodes onto a shared path while limiting component count. The 240-ohm switch resistance should be checked against the front-end input impedance, and channel capacitance may influence settling after each selection. For high-resolution or high-speed conversion, compare switching time, leakage, and input capacitance against the acquisition settling budget before committing the device.

🌐

Data Logger and Monitoring Systems

The CD4053BCN can route monitored signals in compact data loggers where multiple thresholds, alarm sources, or sensor outputs must be presented to a common monitoring input. A single triple multiplexer simplifies board construction while keeping the through-hole PDIP-16 format convenient for prototype and repair-oriented systems. The on-resistance contributes to attenuation and source loading, so the downstream input should have sufficiently high impedance. Select the exact operating grade only after verifying supply voltage, temperature range, and interface-level requirements in the manufacturer datasheet.

ملخص المنتجات الموصى بها

CD4053BE Texas Instruments يُستخدم في: Analog Sensor Signal Multiplexing, Industrial Equipment Interface Switching CD4053BEE4 PDIP-16 functional alternative يُستخدم في: Test and Measurement Signal Routing, Data Acquisition Channel Selection MC74HC4053ANG PDIP-16 multiplexing alternative يُستخدم في: Control Signal Routing, Data Logger and Monitoring Systems
What is the onsemi CD4053BCN?
The onsemi CD4053BCN is a triple 2:1 CMOS analog switch and multiplexer in a 16-pin PDIP package. According to the onsemi CD4053BCN datasheet, it contains three single-ended switching circuits, each using two channels to select one signal path for connection to a common route. Its stated on-resistance is 240 ohms. The device is intended for controlled analog or logic signal routing where the selected signal remains within the specified operating limits.
What are the key specifications of CD4053BCN?
The CD4053BCN provides three 2:1 switching circuits, 240-ohm on-resistance, CMOS construction, and a PDIP-16 package. According to the onsemi CD4053BCN datasheet, it is a single-ended analog multiplexer with a 0.3-inch plastic DIP-16 outline. These are the principal characteristics to consider when selecting the device for board-level signal routing. Supply voltage, switching time, operating temperature, and detailed electrical limits must also be confirmed in the manufacturer datasheet before final design approval.
Where can I download the CD4053BCN datasheet PDF?
The CD4053BCN datasheet can be accessed through the onsemi datasheet entry linked on this product page. It identifies the device as a triple, single-ended 2:1 CMOS multiplexer in a 16-pin PDIP package with 240-ohm on-resistance. Use the manufacturer document for the authoritative pin description, truth table, electrical characteristics, operating limits, and application guidance. The accessible archive link provided on this page is https://www.alldatasheet.com/datasheet-pdf/pdf/2193141/ONSEMI/CD4053BCN.html.
Where can I find the CD4053BCN pinout?
The CD4053BCN pin assignment is documented in the manufacturer datasheet under the pin-description and logic-diagram sections. The device uses a 16-pin PDIP outline with three related 2:1 switching circuits. Assigning PCB tracks should begin with the numbered package drawing and the corresponding signal names rather than relying on a generic CD4053 schematic, because control and common-path assignments must match the exact manufacturer document. The complete numbered pin list is not reproduced here.
How many circuits and channels does the CD4053BCN have?
The CD4053BCN contains three circuits, with two channels available for each 2:1 routing function. According to the onsemi CD4053BCN datasheet, it is a single-ended 3-function, 2-channel CMOS multiplexer in a PDIP-16 package. The three-function architecture can simplify repeated analog routing, but each switched signal must satisfy the device's voltage, current, and timing limits. Consult the truth table when multiple select inputs determine more than one common path.
What is the on-resistance of the CD4053BCN?
The stated on-resistance of the CD4053BCN is 240 ohms. According to the onsemi CD4053BCN datasheet and product description, this value applies to its CMOS analog-switch circuits in the PDIP-16 package. The on-resistance forms part of the signal-path attenuation and loading analysis, particularly when the source impedance is high. Use the manufacturer's test conditions and full electrical tables when designing a precision measurement path.
Is CD4053BCN suitable for analog sensor multiplexing?
The CD4053BCN is suitable for many analog-sensor multiplexing uses because it provides three 2:1 circuits with a 240-ohm on-resistance. According to the onsemi CD4053BCN datasheet, it is a single-ended CMOS multiplexer, making it appropriate where several related sensor or conditioning outputs must be routed to a shared processing channel. Verify input signal range, leakage, switching time, and the source impedance of the sensor against the manufacturer electrical limits before finalizing the interface.
CD4053BCN vs CD4053BE - which is better for a PDIP design?
CD4053BCN and CD4053BE both appear in 16-pin PDIP configurations and are associated with the same 3-function, 2-channel CMOS multiplexer architecture. CD4053BCN is the onsemi-branded CD4053BCN, while CD4053BE is associated with a different manufacturer. Because both use the PDIP-16 format and the comparison source identifies matching functional attributes, CD4053BE is a potential board-level alternative. Verify the exact pin table, voltage range, temperature grade, and lifecycle status before substitution.
What is the best drop-in replacement for CD4053BCN?
The best drop-in replacement must use the same 16-pin PDIP footprint and preserve the CD4053BCN pin functions. CD4053BE and CD4053BEE4 are the closest identified PDIP-16 CD4053-family candidates, while MC74HC4053ANG is another 16-pin single-ended 3-function, 2-channel multiplexer. The manufacturer and technology family must be reviewed because a physical DIP-16 footprint does not by itself guarantee identical voltage ratings, logic levels, control truth table, or switch impedance. No alternative should be released without a datasheet pin-for-pin comparison.
Can MC74HC4053ANG replace CD4053BCN?
MC74HC4053ANG is a potential physical and functional alternative because it is identified as a 16-pin PDIP, 3-function, 2-channel CMOS multiplexer. Its HC logic family may use different supply-voltage and signal-level characteristics from the CD4053BCN, however. According to the cross-reference listing, the package and functional organization match, but the operating details must be compared in the respective manufacturer datasheets. Treat it as a candidate drop-in, not an automatic substitution.
When should I choose CD4053BCN over CD4053BE?
Choose CD4053BCN when you specifically require the onsemi CD4053BCN sourcing lineage and have validated its electrical characteristics for the design. Choose CD4053BE when its manufacturer-specific voltage range, qualification, lifecycle, and exact pin behavior meet the application requirements while preserving the PDIP-16 layout. Both parts are associated with a triple 2:1 CMOS multiplexer architecture. The decisive factors should be verified datasheet ratings and supply continuity rather than the similar package alone.
Is CD4053BCN suitable for instrumentation and test equipment?
The CD4053BCN can fit instrumentation and test-equipment signal routing because it combines three 2:1 circuits, a 240-ohm on-resistance, and through-hole PDIP-16 assembly. According to the onsemi CD4053BCN datasheet, the device provides single-ended multiplexing for controlled signal selection. For precision measurement, evaluate switch leakage, off-isolation, switching time, settling behavior, channel capacitance, and source impedance against the required accuracy. Verify supply and signal limits in the manufacturer electrical tables.
Where can I buy CD4053BCN online?
Use the Request a Quote form on this page to request CD4053BCN availability, current pricing, minimum order quantity, and lead time. The onsemi CD4053BCN is listed as a 3-circuit, 2:1, 240-ohm, 16-PDIP interface switch. A complete commercial response should confirm the exact suffix, package, quantity, shipment date, and authorized source requirements. Do not substitute a different temperature grade or package without validating the mechanical and electrical differences.
What is the current price of CD4053BCN?
The current CD4053BCN price and quantity breaks should be obtained through the Request a Quote form on this page. According to the onsemi CD4053BCN product information, the component is a triple 2:1 CMOS multiplexer with 240-ohm on-resistance in a PDIP-16 package. A quotation should state the requested quantity, packaging preference, destination, and required delivery date so the commercial offer corresponds to the exact onsemi CD4053BCN ordering configuration.
What is the lead time for CD4053BCN?
Request the current CD4053BCN lead time through the Request a Quote form on this page. According to the onsemi CD4053BCN datasheet, this is a 3-circuit, single-ended 2:1 CMOS multiplexer in a 16-pin PDIP package. Lead time can depend on order quantity, packaging, shipment destination, and market conditions, so the form should be submitted with the required schedule and quantity. The manufacturer listing identifies the device as onsemi CD4053BCN.
Is CD4053BCN in stock?
Use the Request a Quote form on this page to request the current CD4053BCN stock status, allocation, and expected dispatch date. According to the onsemi CD4053BCN product information, the requested device is a triple 2:1, 240-ohm, 16-PDIP interface switch. A firm availability response should confirm the exact manufacturer part number and quantity. Do not use a stock indication for another package suffix as proof that the PDIP-16 CD4053BCN is immediately available.
What are the key applications for a CD4053BCN triple multiplexer?
The CD4053BCN is suited to applications that repeatedly select one of two related signals across three circuits, including sensor routing, test-point multiplexing, controlled signal sharing, and multi-channel measurement interfaces. According to the onsemi CD4053BCN datasheet, the device provides three 2:1 single-ended CMOS switching circuits with 240-ohm on-resistance. The best use case has modest source impedance, compatible signal levels, and sufficient settling time. High-impedance precision nodes require careful review of leakage and capacitance.

بيانات مرجعية هندسية لـ CD4053BCN — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the onsemi CD4053BCN when a design needs three single-ended 2:1 routing functions, a 240-ohm on-resistance, and a through-hole PDIP-16 package. It is particularly suitable for prototype, repair-oriented, test-fixture, and moderate-impedance signal-routing designs. Choose CD4053BE or CD4053BEE4 when their manufacturer-specific voltage, temperature, qualification, and lifecycle characteristics better fit the project while retaining the same identified functional and package organization. Consider MC74HC4053ANG for a same-brand HC-series sourcing option, but verify its logic levels and switch performance carefully. A shared DIP-16 outline is necessary but not sufficient for a drop-in release: compare the numbered pin table, truth table, operating limits, and maximum ratings before substituting any candidate.

المقارنة مع البدائل

المعامل هذا المنتج CD4053BE CD4053BEE4 MC74HC4053ANG
Brand onsemi Texas Instruments Texas Instruments onsemi
Package PDIP-16 PDIP-16 - same PDIP-16 - same PDIP-16 - same
Multiplexer Function Triple 2:1, single-ended Triple 2:1, single-ended Triple 2:1, single-ended Triple 2:1, single-ended
Number of Circuits 3 circuits 3 circuits 3 circuits 3 circuits
Channels per Circuit 2 channels 2 channels 2 channels 2 channels
Logic Family CMOS CMOS CMOS CMOS
Mounting Style Through-hole PDIP-16 Through-hole PDIP-16 Through-hole PDIP-16 Through-hole PDIP-16

أبرز الفروقات

  • Three related 2:1 routing circuits in one package (مقابلMC74HC4053ANG)
  • Direct onsemi sourcing lineage for the named CD4053BCN (مقابلCD4053BE)
  • Documented 240-ohm on-resistance (مقابلCD4053BEE4)
  • Single package replaces three separate 2:1 switches (مقابلCD4053BE)

ملاحظات التصميم

Assign the PCB footprint directly from the 16-pin PDIP outline and verify each connection against the exact manufacturer pin-description table. The device combines three 2:1 switching circuits, so treating it as a generic 4:1 mux can produce incorrect routing. Keep the common paths and paired channel traces short, maintain a continuous ground reference, and avoid routing sensitive inputs directly beside the digital select lines. A socket may simplify DIP-16 prototype replacement.

Include the 240-ohm on-resistance in the complete source impedance and attenuation calculation. It is usually acceptable for logic-level routing but can materially affect a high-impedance sensor or precision measurement node. Check leakage, off-isolation, channel capacitance, and switching time against the required settling window. Place any following buffer or amplifier close to the multiplexer when additional source impedance would otherwise degrade accuracy or bandwidth.

Do not approve a replacement from package appearance alone. CD4053BE, CD4053BEE4, and MC74HC4053ANG use the identified PDIP-16 format and share the 3-function, 2-channel organization, but supply voltage, signal levels, switching impedance, control truth table, and qualification can differ between series. Compare every numbered pin and the worst-case electrical limits before releasing a substitution. Confirm that unused inputs are handled as directed by the manufacturer.

For mixed analog and digital routing, keep the three selected analog paths away from select-control traces and other switching nodes. Use a low-impedance ground plane, minimize loop area, and place any required bypass capacitor close to the device's supply and ground pins using the manufacturer reference layout. Through-hole DIP construction can increase loop area, so account for lead inductance and prototype-board cleanliness when operating signals at higher frequencies.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS compliance is stated in the product listing. Other environmental, qualification, and material-compliance attributes were not established from the cited manufacturer information.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

CD4053BCN datasheet CD4053BCN pinout CD4053BCN datasheet pdf onsemi CD4053BCN CD4053BCN PDIP-16 multiplexer CD4053BCN triple 2:1 switch CD4053BCN 240 ohm on-resistance CD4053BCN equivalent CD4053BCN replacement CD4053BCN cross reference CD4053BCN vs CD4053BE CD4053BCN price CD4053BCN stock CD4053BCN analog sensor multiplexing

المكونات والمصطلحات ذات الصلة

onsemi CD4053BCN CD4053BE CD4053BEE4 MC74HC4053ANG analog switch analog multiplexer multiplexer interface IC CMOS single-ended 2:1 switch triple multiplexer 240-ohm on-resistance PDIP-16 through-hole package DIP-16 MS-001 signal routing sensor multiplexing test-point routing data acquisition RoHS semiconductor
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر