Cirrus Logic Inc.

CS4399-CNZ - 32-Bit Stereo Audio DAC | Cirrus Logic

MPN: CS4399-CNZ ✗ انتهى عمره الإنتاجي
1.8 V to 5 V Vdss QFN-40 with exposed pad, 5 mm x 5 mm Package
الحد الأدنى للطلب: 1 |

CS4399-CNZ نظرة عامة

The Cirrus Logic CS4399-CNZ is a discontinued 32-bit stereo audio digital-to-analog converter supporting PCM and DSD playback up to 384 kHz in a 40-pin QFN (5 mm × 5 mm) package with an exposed pad. It delivers 130 dBA dynamic range, -108 dB THD+N, greater than 110 dB interchannel isolation, and a 600 ohm pseudo-differential output impedance. Its 1.8 V to 5 V operating range suits low-voltage, space-constrained audio equipment.

An audio DAC is a mixed-signal semiconductor that converts digital PCM or DSD audio samples into an analog voltage suitable for an output amplifier and loudspeaker system. The CS4399 belongs to the digital-to-analog converter hierarchy, where resolution determines the supported numerical format while dynamic range, distortion, channel separation, and output impedance influence the resulting signal-chain performance.

The CS4399 supports stereo PCM and DSD formats through 384 kHz, providing a compact solution for high-resolution audio. A 130 dBA dynamic range gives the converter a wide noise-free signal window, while -108 dB total harmonic distortion plus noise limits unwanted harmonic and broadband artifacts. Interchannel isolation above 110 dB supports accurate separation of left and right channels in multichannel or stereo playback equipment.

Its pseudo-differential architecture and 600 ohm output impedance are intended for straightforward integration with downstream analog stages. Proprietary digital-interpolation filters provide five selectable response choices, allowing system designers to balance frequency-domain behavior, time-domain response, and compatibility with the preferred analog reconstruction network. The QFN package reduces board area while its exposed thermal pad supports heat transfer into the PCB.

Typical applications include high-resolution network players, USB and digital audio interfaces, premium headphone DAC boards, home-theater audio processors, portable media equipment, and compact stereo playback systems. The 1.8 V to 5 V supply range supports both low-voltage portable designs and conventional 3.3 V or 5 V audio equipment.

When laying out a CS4399-CNZ board, use the manufacturer pin description and recommended application circuit to assign power, ground, digital input, clock, and analog output connections. Keep the exposed pad connected to the recommended ground plane and provide short, symmetrical routing around the stereo outputs. Check the selected digital filter and external reconstruction network together because their combined response affects the final analog bandwidth.

This page consolidates the documented performance, package characteristics, lifecycle information, same-package alternatives, comparison parameters, and practical integration considerations for engineers evaluating the discontinued CS4399-CNZ or planning an obsolescence-driven redesign.

بدائل مباشرة لـ CS4399-CNZ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

CS43131-CNZR

✅ بديل مباشر
📦 QFN-40
Both are 32-bit dual-channel QFN-40 audio DACs, while implementation-specific current, digital-interface, clock, and filter details require board-level verification.

📋 بديل مرجعي (غير موجود في الكتالوج)

CS43L36-CNZ

✅ بديل مباشر
📦 QFN-40
Both use a QFN-40 package and dual-channel DAC architecture; CS43L36 targets compact portable audio and differs in documented power, feature, and programming details.

📋 بديل مرجعي (غير موجود في الكتالوج)

CS4399-CNZ الحدود القصوى والخصائص الكهربائية

Converter Type Stereo audio digital-to-analog converter
الدقة 32 bit
Maximum Supported Sample Rate 384 kHz
Supported Digital Formats PCM and DSD
تكوين الخرج Pseudo-differential stereo
Dynamic Range 130 dBA
THD+N -108 dB
Interchannel Isolation >110 dB
Output Impedance 600 ohm
Operating Voltage Range 1.8 V to 5 V
العلبة QFN-40 with exposed pad, 5 mm x 5 mm
Digital Interpolation Filters 5 selectable responses
Number of Audio Channels 2 channels
نوع التركيب Surface mount
حالة دورة الحياة Discontinued
حالة RoHS Compliant

دليل تكوين أطراف CS4399-CNZ qfn-40 with exposed pad, 5 mm x 5 mm

تكوين الأطراف لـ CS4399-CNZ (حزمة qfn-40 with exposed pad, 5 mm x 5 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة qfn-40 with exposed pad, 5 mm x 5 mm لـ CS4399-CNZ

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CS4399-CNZ.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

CS4399-CNZ مناسب لـ 6 التطبيقs: High-Resolution Network Audio Player, USB Digital Audio Interface, Premium Headphone DAC Board, Home-Theater Audio Processor, Portable Stereo Audio Equipment, Digital Recording Studio Monitor.

🌐

High-Resolution Network Audio Player

The CS4399-CNZ fits a high-resolution network player that accepts high-rate digital streams and converts them to high-quality stereo analog audio. Its documented 32-bit architecture and support for PCM and DSD up to 384 kHz preserve the source format, while 130 dBA dynamic range and -108 dB THD+N provide ample margin for low-noise playback stages. The pseudo-differential outputs can feed the reconstruction and amplifier circuitry specified in the manufacturer application guidance. A 5 mm × 5 mm QFN also saves board area, although the exposed pad requires careful ground-plane and thermal-layout treatment.

🔧

USB Digital Audio Interface

The CS4399-CNZ is suitable for a USB audio interface requiring a high-performance stereo conversion stage. A digital audio receiver can deliver PCM or DSD data to the converter, while the documented 384 kHz maximum rate supports high-resolution source formats. The converter's -108 dB THD+N, greater than 110 dB interchannel isolation, and 600 ohm output impedance support a clean transition into an analog output stage. Designers should allocate the QFN footprint, exposed-pad connection, digital clock routing, and external reconstruction network according to the manufacturer guidance.

🎧

Premium Headphone DAC Board

The CS4399-CNZ can serve as the conversion element in a premium headphone DAC board where low distortion and channel separation are priorities. Its 130 dBA dynamic range provides a quiet conversion stage, while -108 dB THD+N and greater than 110 dB interchannel isolation help preserve signal detail in a two-channel headphone output architecture. The compact QFN-40 package enables a dense board, but the analog path still requires the recommended reconstruction network, balanced or pseudo-differential routing, and careful separation of digital clocks from sensitive output nodes.

📺

Home-Theater Audio Processor

The CS4399-CNZ is appropriate for a stereo output section of a home-theater processor or preamplifier. It converts high-resolution PCM or DSD audio into low-distortion analog signals while maintaining more than 110 dB of interchannel isolation. The -108 dB THD+N specification is particularly useful when the converter precedes a high-gain analog stage because it limits the converter's contribution to combined distortion. Its 1.8 V to 5 V operating range supports multiple system architectures, provided the selected rails, clocking scheme, and analog output network satisfy the manufacturer requirements.

📱

Portable Stereo Audio Equipment

The CS4399-CNZ can be evaluated for portable stereo equipment operating from a 1.8 V to 5 V supply. Its low-power audio-DAC positioning, compact QFN package, and support for high-resolution formats suit space-constrained products that also need a wide noise floor and low distortion. The five selectable digital-interpolation responses provide flexibility for matching different reconstruction networks and desired time-domain behavior. Before committing, verify current consumption, clock requirements, analog output loading, and exposed-pad thermal performance because the exact operating limits are not stated on the distributor summaries.

🏭

Digital Recording Studio Monitor

The CS4399-CNZ is suited to a digital studio monitoring chain that requires accurate stereo conversion with low distortion. The documented -108 dB THD+N and greater than 110 dB interchannel isolation help maintain channel balance and low added harmonic content, while 130 dBA dynamic range supports quiet program monitoring. The 384 kHz PCM and DSD capability can accommodate high-resolution playback sources. Signal-path symmetry, grounding, and output-stage matching remain critical, so use the recommended output network and provide continuous ground-plane coupling beneath the exposed pad rather than relying on short thermal vias alone.

ملخص المنتجات الموصى بها

CS43131-CNZR Same-package Cirrus Logic stereo DAC comparator يُستخدم في: High-Resolution Network Audio Player, USB Digital Audio Interface, Premium Headphone DAC Board, Home-Theater Audio Processor, Portable Stereo Audio Equipment, Digital Recording Studio Monitor CS43L36-CNZ Compact QFN-40 audio DAC comparator يُستخدم في: High-Resolution Network Audio Player, USB Digital Audio Interface, Premium Headphone DAC Board, Home-Theater Audio Processor, Portable Stereo Audio Equipment, Digital Recording Studio Monitor
What are the key specifications of CS4399-CNZ that engineers should know?
The CS4399-CNZ is a 32-bit stereo audio DAC with support for PCM and DSD playback up to 384 kHz. According to the Cirrus Logic product page and manufacturer datasheet, it provides 130 dBA dynamic range, -108 dB THD+N, greater than 110 dB interchannel isolation, a 600 ohm pseudo-differential output, and a 1.8 V to 5 V operating range. The device uses a 40-pin 5 mm × 5 mm QFN package with an exposed pad and five selectable digital-interpolation filter responses.
Where can I download the CS4399-CNZ datasheet PDF?
The CS4399-CNZ datasheet PDF is available from the Cirrus Logic CS4399 product page and the linked manufacturer-document copy. It describes the 32-bit stereo converter, 384 kHz PCM and DSD operation, electrical characteristics, digital and analog interfaces, recommended application circuits, and the 40-pin QFN pin assignments. Use the manufacturer PDF as the authoritative document when assigning PCB nets or checking the exposed-pad and external reconstruction-network requirements.
Where can I find the CS4399-CNZ pinout?
The CS4399-CNZ pinout is documented in the manufacturer datasheet rather than on the distributor listing pages. The device is a 40-pin QFN with an exposed pad and a 5 mm × 5 mm body. When assigning tracks, follow the numbered QFN footprint and the pin-description table in the datasheet exactly, especially for analog outputs, digital audio inputs, clock signals, supplies, ground connections, and the exposed thermal pad.
Is the CS4399-CNZ suitable for high-resolution audio equipment?
The CS4399-CNZ is suitable for high-resolution stereo equipment because it supports 32-bit PCM and DSD operation up to 384 kHz. Its documented 130 dBA dynamic range, -108 dB THD+N, and greater than 110 dB interchannel isolation support low-noise, high-fidelity conversion. The device also includes five selectable digital-interpolation responses, allowing designers to tune time-domain and frequency-domain behavior for the selected reconstruction network.
What is the CS4399-CNZ used for?
The CS4399-CNZ converts digital PCM or DSD stereo audio into low-distortion analog signals. According to the Cirrus Logic product page, its 130 dBA dynamic range, -108 dB THD+N, and greater than 110 dB channel isolation make it suitable for high-fidelity playback and signal conversion. Typical uses include network players, digital audio interfaces, headphone DAC boards, home-theater processors, and portable stereo equipment operating from 1.8 V to 5 V.
What is the output impedance of the CS4399-CNZ?
The CS4399-CNZ has a documented output impedance of 600 ohm. This pseudo-differential stereo output is intended for integration with the external reconstruction and output-amplifier stages shown in the manufacturer application guidance. When designing the analog path, account for the output impedance, load requirements, feedback network, and output-stage drive requirements rather than treating the DAC pins as ideal voltage sources.
What is the difference between CS4399-CNZ and CS43131-CNZR?
Both CS4399-CNZ and CS43131-CNZR are Cirrus Logic 32-bit, dual-channel audio DACs in the QFN-40 package family, but they are not necessarily identical in every operating or filtering detail. The comparison information confirms a common 32-bit, QFN-40 format, while the CS4399 is specifically documented for 130 dBA dynamic range, -108 dB THD+N, greater than 110 dB isolation, and PCM plus DSD support. Verify the complete pin and register descriptions before substitution.
CS4399-CNZ vs CS43L36-CNZ — which is better for a portable audio design?
The CS4399-CNZ is the better documented choice when 384 kHz PCM or DSD support and high-resolution stereo performance are required, because its listed specifications include 130 dBA dynamic range and -108 dB THD+N. The CS43L36-CNZ is described as a compact, efficient audio DAC for portable devices, but the available comparison does not establish identical electrical limits or every digital feature. Supply range, current consumption, clocking, and filter requirements should decide the final selection.
When should I choose CS4399-CNZ over CS43131-CNZR?
Choose the CS4399-CNZ when the design specifically depends on its documented DSD capability, 384 kHz maximum rate, 130 dBA dynamic range, and -108 dB THD+N. Choose the CS43131-CNZR when its lower-power or implementation-specific characteristics better satisfy the product requirements. Both are Cirrus Logic QFN-40 stereo DAC options, but a board-level substitution should also confirm pin functions, voltage rails, clocks, filter behavior, and software configuration.
What can replace the discontinued CS4399-CNZ?
The best verified same-package starting points are the Cirrus Logic CS43131-CNZR and CS43L36-CNZ, both listed as QFN-40 audio DACs. Neither should be treated as an automatic functional replacement: the CS43131 has a different product description, while the CS43L36 is positioned for compact portable equipment. Confirm pin-by-pin compatibility, supported formats, clocking, supply voltage, register programming, reconstruction network, and lifecycle requirements before approving a drop-in substitution.
Is there a best cross-brand equivalent for CS4399-CNZ?
No cross-brand drop-in equivalent is established by the available technical information. The identified alternatives are Cirrus Logic devices, and the available comparisons do not prove that a competitor DAC has the same 40-pin pinout, 1.8 V to 5 V operating range, PCM and DSD feature set, and 384 kHz rate. For a cross-brand redesign, treat the alternative as a functional migration requiring schematic, PCB, clock, filtering, and firmware changes rather than a drop-in replacement.
Where can I buy the CS4399-CNZ online?
Use the Request a Quote form on this page to inquire about CS4399-CNZ availability, minimum order quantity, and current lead time. Because Cirrus Logic marks the CS4399 as discontinued, availability may depend on remaining inventory rather than an active production roadmap. Include the exact CS4399-CNZ orderable MPN, target quantity, and required delivery location in the request to obtain a current supply response.
What is the price of the CS4399-CNZ?
Use the Request a Quote form on this page for the current price and volume availability of the obsolete CS4399-CNZ. The visible pricing panel should reflect the platform's current quote or inventory calculation rather than a static historical figure. For design planning, include the required reel quantity, delivery schedule, and any date-code or traceability requirements when requesting a quotation.
What is the lead time for the CS4399-CNZ?
The current lead time for the discontinued CS4399-CNZ must be confirmed through the Request a Quote form on this page. Lead time can vary with remaining factory inventory, allocation, package format, quantity, and inspection requirements. A quote request should state the required quantity, date-code policy, acceptable packaging, and delivery location so the supplier can identify the correct available material.
Is the CS4399-CNZ still active or discontinued?
The Cirrus Logic product page explicitly identifies the CS4399 as discontinued. The CS4399-CNZ therefore belongs to an obsolescence-managed product rather than an active new-design family. According to the manufacturer page, the device was designed as a low-power audio DAC with 130 dBA dynamic range, -108 dB THD+N, greater than 110 dB isolation, and 600 ohm output impedance. New designs should confirm the recommended current DAC family before committing a schematic.

بيانات مرجعية هندسية لـ CS4399-CNZ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the CS4399-CNZ when maintaining an existing design requires the documented 32-bit PCM and DSD capability, 384 kHz sample-rate support, 130 dBA dynamic range, and -108 dB THD+N. Its 40-pin QFN package and pseudo-differential outputs suit high-performance network players, digital audio interfaces, studio monitoring, and premium headphone DAC boards. Evaluate the CS43131-CNZR when a newer same-package Cirrus Logic implementation can satisfy the system, but confirm its current, dynamic-range, clock, filter, and register details rather than assuming equivalence. Consider the CS43L36-CNZ for portable systems where compactness and efficiency dominate, provided its format limits and output architecture meet the required performance. No cross-brand drop-in alternative is established here. Because the CS4399 is discontinued, new production designs should treat the existing footprint as a migration target and validate every electrical, software, and PCB change before release.

المقارنة مع البدائل

المعامل هذا المنتج CS43131-CNZR CS43L36-CNZ
Package QFN-40 with exposed pad, 5 mm x 5 mm QFN-40 QFN-40
Brand Cirrus Logic Cirrus Logic Cirrus Logic
Converter Type Stereo audio DAC Advanced 32-bit DAC Advanced stereo DAC
Resolution 32 bit 32 bit 32 bit
Number of Converters 2 converters 2 converters 2 converters
RoHS Compliant Compliant Compliant
Target Application High-performance stereo audio conversion High-performance audio DAC Portable-device audio conversion

أبرز الفروقات

  • Explicit support for high-rate PCM and DSD conversion (مقابلCS43L36-CNZ)
  • Higher documented dynamic range (مقابلCS43131-CNZR)
  • Documented low-distortion performance (مقابلCS43L36-CNZ)

ملاحظات التصميم

Implement the CS4399-CNZ on the 40-pin QFN footprint specified by the manufacturer and connect the exposed pad as directed in the datasheet. Keep the analog output connections short and symmetrical, and place the external reconstruction components close to their associated output nodes. Separate digital clock and data routing from the analog section, particularly around the 600 ohm pseudo-differential outputs, to reduce coupling into the downstream amplifier.

Use the recommended analog and digital supply arrangements for the 1.8 V to 5 V operating range. Place the required bypass capacitors at their designated power pins and provide a low-impedance return path for each supply domain. Check the converter's operating current under the selected clock, sample-rate, and filter settings before sizing regulators; the distributor and product summaries do not provide the complete supply-current limits required for final power budgeting.

Treat clock, data, and ground routing as a coupled system rather than routing signals independently. Follow the manufacturer clock and application schematics, minimize stub lengths, and maintain return-current continuity beneath the device. Select one of the five digital-interpolation responses together with the external analog reconstruction network because the combined impulse response and frequency response determine ringing and pre-echo behavior in the final analog path.

Do not assume that every QFN-40 Cirrus Logic stereo DAC is automatically interchangeable with the CS4399-CNZ. Verify every pin, supply rail, clock domain, digital interface, output configuration, register address, and software-control requirement before substituting the CS43131-CNZR or CS43L36-CNZ. For an existing board, use the manufacturer pin table and application circuit rather than relying on package dimensions alone.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The CS4399 and CS43L36 comparison identifies RoHS compliance for the CS4399. The CS4399 is an audio DAC rather than an automotive-qualified device. Other compliance attributes are not established by the available product information.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

cs4399 dac CS4399-CNZ datasheet CS4399-CNZ datasheet pdf CS4399-CNZ pinout CS4399-CNZ specifications CS4399-CNZ replacement CS4399-CNZ equivalent CS4399-CNZ cross reference CS4399-CNZ QFN-40 footprint CS4399-CNZ price CS4399-CNZ stock Cirrus Logic CS4399-CNZ CS4399-CNZ vs CS43131-CNZR CS4399-CNZ 384kHz DSD DAC

المكونات والمصطلحات ذات الصلة

Cirrus Logic CS4399-CNZ CS4399 CS43131-CNZR CS43L36-CNZ digital-to-analog converter audio DAC mixed-signal integrated circuit stereo DAC delta-sigma audio converter PCM DSD pseudo-differential output dynamic range THD+N interchannel isolation output impedance digital interpolation filter QFN-40 exposed pad surface mount SMD RoHS AEC-Q100 high-resolution audio
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر