CS4399-CNZ - 32-Bit Stereo Audio DAC | Cirrus Logic
Артикул: CS4399-CNZ ✗ Снят с производстваCS4399-CNZ Обзор
An audio DAC is a mixed-signal semiconductor that converts digital PCM or DSD audio samples into an analog voltage suitable for an output amplifier and loudspeaker system. The CS4399 belongs to the digital-to-analog converter hierarchy, where resolution determines the supported numerical format while dynamic range, distortion, channel separation, and output impedance influence the resulting signal-chain performance.
The CS4399 supports stereo PCM and DSD formats through 384 kHz, providing a compact solution for high-resolution audio. A 130 dBA dynamic range gives the converter a wide noise-free signal window, while -108 dB total harmonic distortion plus noise limits unwanted harmonic and broadband artifacts. Interchannel isolation above 110 dB supports accurate separation of left and right channels in multichannel or stereo playback equipment.
Its pseudo-differential architecture and 600 ohm output impedance are intended for straightforward integration with downstream analog stages. Proprietary digital-interpolation filters provide five selectable response choices, allowing system designers to balance frequency-domain behavior, time-domain response, and compatibility with the preferred analog reconstruction network. The QFN package reduces board area while its exposed thermal pad supports heat transfer into the PCB.
Typical applications include high-resolution network players, USB and digital audio interfaces, premium headphone DAC boards, home-theater audio processors, portable media equipment, and compact stereo playback systems. The 1.8 V to 5 V supply range supports both low-voltage portable designs and conventional 3.3 V or 5 V audio equipment.
When laying out a CS4399-CNZ board, use the manufacturer pin description and recommended application circuit to assign power, ground, digital input, clock, and analog output connections. Keep the exposed pad connected to the recommended ground plane and provide short, symmetrical routing around the stereo outputs. Check the selected digital filter and external reconstruction network together because their combined response affects the final analog bandwidth.
This page consolidates the documented performance, package characteristics, lifecycle information, same-package alternatives, comparison parameters, and practical integration considerations for engineers evaluating the discontinued CS4399-CNZ or planning an obsolescence-driven redesign.
Аналоги без доработки для CS4399-CNZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
CS43131-CNZR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CS43L36-CNZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CS4399-CNZ Максимальные параметры и электрические характеристики
| Converter Type | Stereo audio digital-to-analog converter |
| Разрешение | 32 bit |
| Maximum Supported Sample Rate | 384 kHz |
| Supported Digital Formats | PCM and DSD |
| Выходная конфигурация | Pseudo-differential stereo |
| Dynamic Range | 130 dBA |
| THD+N | -108 dB |
| Interchannel Isolation | >110 dB |
| Output Impedance | 600 ohm |
| Operating Voltage Range | 1.8 V to 5 V |
| Корпус | QFN-40 with exposed pad, 5 mm x 5 mm |
| Digital Interpolation Filters | 5 selectable responses |
| Number of Audio Channels | 2 channels |
| Тип монтажа | Surface mount |
| Статус жизненного цикла | Discontinued |
| Статус RoHS | Compliant |
Руководство по цоколевке CS4399-CNZ в корпусе qfn-40 with exposed pad, 5 mm x 5 mm
Цоколевка для CS4399-CNZ (корпус qfn-40 with exposed pad, 5 mm x 5 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для CS4399-CNZ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
CS4399-CNZ подходит для 6 применениеs: High-Resolution Network Audio Player, USB Digital Audio Interface, Premium Headphone DAC Board, Home-Theater Audio Processor, Portable Stereo Audio Equipment, Digital Recording Studio Monitor.
High-Resolution Network Audio Player
The CS4399-CNZ fits a high-resolution network player that accepts high-rate digital streams and converts them to high-quality stereo analog audio. Its documented 32-bit architecture and support for PCM and DSD up to 384 kHz preserve the source format, while 130 dBA dynamic range and -108 dB THD+N provide ample margin for low-noise playback stages. The pseudo-differential outputs can feed the reconstruction and amplifier circuitry specified in the manufacturer application guidance. A 5 mm × 5 mm QFN also saves board area, although the exposed pad requires careful ground-plane and thermal-layout treatment.
Рекомендуется
USB Digital Audio Interface
The CS4399-CNZ is suitable for a USB audio interface requiring a high-performance stereo conversion stage. A digital audio receiver can deliver PCM or DSD data to the converter, while the documented 384 kHz maximum rate supports high-resolution source formats. The converter's -108 dB THD+N, greater than 110 dB interchannel isolation, and 600 ohm output impedance support a clean transition into an analog output stage. Designers should allocate the QFN footprint, exposed-pad connection, digital clock routing, and external reconstruction network according to the manufacturer guidance.
Рекомендуется
Premium Headphone DAC Board
The CS4399-CNZ can serve as the conversion element in a premium headphone DAC board where low distortion and channel separation are priorities. Its 130 dBA dynamic range provides a quiet conversion stage, while -108 dB THD+N and greater than 110 dB interchannel isolation help preserve signal detail in a two-channel headphone output architecture. The compact QFN-40 package enables a dense board, but the analog path still requires the recommended reconstruction network, balanced or pseudo-differential routing, and careful separation of digital clocks from sensitive output nodes.
Рекомендуется
Home-Theater Audio Processor
The CS4399-CNZ is appropriate for a stereo output section of a home-theater processor or preamplifier. It converts high-resolution PCM or DSD audio into low-distortion analog signals while maintaining more than 110 dB of interchannel isolation. The -108 dB THD+N specification is particularly useful when the converter precedes a high-gain analog stage because it limits the converter's contribution to combined distortion. Its 1.8 V to 5 V operating range supports multiple system architectures, provided the selected rails, clocking scheme, and analog output network satisfy the manufacturer requirements.
Рекомендуется
Portable Stereo Audio Equipment
The CS4399-CNZ can be evaluated for portable stereo equipment operating from a 1.8 V to 5 V supply. Its low-power audio-DAC positioning, compact QFN package, and support for high-resolution formats suit space-constrained products that also need a wide noise floor and low distortion. The five selectable digital-interpolation responses provide flexibility for matching different reconstruction networks and desired time-domain behavior. Before committing, verify current consumption, clock requirements, analog output loading, and exposed-pad thermal performance because the exact operating limits are not stated on the distributor summaries.
Рекомендуется
Digital Recording Studio Monitor
The CS4399-CNZ is suited to a digital studio monitoring chain that requires accurate stereo conversion with low distortion. The documented -108 dB THD+N and greater than 110 dB interchannel isolation help maintain channel balance and low added harmonic content, while 130 dBA dynamic range supports quiet program monitoring. The 384 kHz PCM and DSD capability can accommodate high-resolution playback sources. Signal-path symmetry, grounding, and output-stage matching remain critical, so use the recommended output network and provide continuous ground-plane coupling beneath the exposed pad rather than relying on short thermal vias alone.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CS4399-CNZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CS43131-CNZR | CS43L36-CNZ |
|---|---|---|---|
| Package | QFN-40 with exposed pad, 5 mm x 5 mm | QFN-40 | QFN-40 |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Converter Type | Stereo audio DAC | Advanced 32-bit DAC | Advanced stereo DAC |
| Resolution | 32 bit | 32 bit | 32 bit |
| Number of Converters | 2 converters | 2 converters | 2 converters |
| RoHS | Compliant | Compliant | Compliant |
| Target Application | High-performance stereo audio conversion | High-performance audio DAC | Portable-device audio conversion |
Ключевые отличия
- Explicit support for high-rate PCM and DSD conversion (против CS43L36-CNZ)
- Higher documented dynamic range (против CS43131-CNZR)
- Documented low-distortion performance (против CS43L36-CNZ)
Заметки по проектированию
Implement the CS4399-CNZ on the 40-pin QFN footprint specified by the manufacturer and connect the exposed pad as directed in the datasheet. Keep the analog output connections short and symmetrical, and place the external reconstruction components close to their associated output nodes. Separate digital clock and data routing from the analog section, particularly around the 600 ohm pseudo-differential outputs, to reduce coupling into the downstream amplifier.
Use the recommended analog and digital supply arrangements for the 1.8 V to 5 V operating range. Place the required bypass capacitors at their designated power pins and provide a low-impedance return path for each supply domain. Check the converter's operating current under the selected clock, sample-rate, and filter settings before sizing regulators; the distributor and product summaries do not provide the complete supply-current limits required for final power budgeting.
Treat clock, data, and ground routing as a coupled system rather than routing signals independently. Follow the manufacturer clock and application schematics, minimize stub lengths, and maintain return-current continuity beneath the device. Select one of the five digital-interpolation responses together with the external analog reconstruction network because the combined impulse response and frequency response determine ringing and pre-echo behavior in the final analog path.
Do not assume that every QFN-40 Cirrus Logic stereo DAC is automatically interchangeable with the CS4399-CNZ. Verify every pin, supply rail, clock domain, digital interface, output configuration, register address, and software-control requirement before substituting the CS43131-CNZR or CS43L36-CNZ. For an existing board, use the manufacturer pin table and application circuit rather than relying on package dimensions alone.
Информация о соответствии
The CS4399 and CS43L36 comparison identifies RoHS compliance for the CS4399. The CS4399 is an audio DAC rather than an automotive-qualified device. Other compliance attributes are not established by the available product information.