Infineon

CY7C68300C-100AXC - USB 2.0 to ATA Bridge | Infineon

MPN: CY7C68300C-100AXC ✓ نشط
100-pin TQFP Package Supported Memory
الحد الأدنى للطلب: 1 |

CY7C68300C-100AXC نظرة عامة

The Infineon Technologies CY7C68300C-100AXC is an EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge controller housed in a 100-pin TQFP package measuring 14 mm by 20 mm. It provides a USB 2.0 host-facing interface, support for one ATA/ATAPI device, and CompactFlash support for portable storage designs.

A USB-to-ATA bridge is an interface controller that translates USB transactions into ATA and ATAPI commands used by conventional storage devices. Within the semiconductor hierarchy, this device combines a USB device controller, ATA/ATAPI host interface, embedded firmware, and USB connectivity. Its primary role is to let a USB-equipped computer or embedded host use storage peripherals that originally use the parallel ATA interface.

The bridge supports one ATA or ATAPI device and CompactFlash media through its storage-side interface. It also supports board-level manufacturing testing through the USB interface, reducing the need for a separate fixture interface during production. The ATA interface can be placed in a high-impedance state, allowing the bus to be shared with another controller such as an IEEE 1394 controller.

The USB side supports USB 2.0 operation, making the controller suitable for systems requiring a standards-compliant USB connection to CompactFlash or ATA-based storage. The 100-pin TQFP package provides a substantial number of interface, control, power, and ground connections, supporting both host-side USB signaling and the wider ATA bus.

Typical applications include CompactFlash card readers, USB-to-IDE adapters, embedded data loggers, industrial storage gateways, test equipment, and legacy computer upgrades. The integrated USB manufacturing-test capability is particularly useful in high-volume production because it allows configuration and functional checks through the same USB connection used during normal operation.

PCB design requires careful routing of the ATA and ATAPI signals, including the differential USB pair and associated signal-integrity considerations. The device should be placed close to its connectors and storage-interface circuitry, with short return paths and controlled impedance routing for the USB differential pair. Power and ground-pin distribution should follow the manufacturer’s package and reference-layout guidance.

This page combines the device identity, package details, interface capabilities, replacement guidance, comparison criteria, and practical implementation considerations needed to evaluate the CY7C68300C-100AXC for a USB storage interface. Use the manufacturer datasheet pin-description table and recommended layout when assigning every PCB connection.

بدائل مباشرة لـ CY7C68300C-100AXC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

CY7C68300A-100AXC

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 100-TQFP (14x20)
Updated CY7C68300A family revision with manufacturer-confirmed pin compatibility; specific electrical and firmware differences are .

📋 بديل مرجعي (غير موجود في الكتالوج)

CY7C68300C-100AXC المواصفات

Device Type USB 2.0 to ATA/ATAPI bridge controller
USB Interface Version USB 2.0
ATA Device Support 1 ATA or ATAPI device
CompactFlash Support Supported
Manufacturing Test Interface USB interface
ATA Bus Sharing High-impedance mode supported
Package Type 100-pin TQFP
Package Dimensions 14 mm x 20 mm
عدد الأطراف 100 pins
نوع التركيب Surface mount
Product Series EZ-USB AT2LP
Device Category USB bridge controller
Storage Interface ATA and ATAPI
Bus Sharing Example IEEE 1394 controller

دليل تكوين أطراف CY7C68300C-100AXC 14 mm x 20 mm

تكوين الأطراف لـ CY7C68300C-100AXC (حزمة 14 mm x 20 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 14 mm x 20 mm لـ CY7C68300C-100AXC

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CY7C68300C-100AXC.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

CY7C68300C-100AXC مناسب لـ 6 التطبيقs: USB CompactFlash Card Reader, Legacy USB-to-IDE Storage Adapter, Embedded Industrial Data Logger, USB Storage Test Fixture, Shared ATA Storage Controller, Legacy Computer Storage Upgrade.

💾

USB CompactFlash Card Reader

The CY7C68300C-100AXC fits a USB CompactFlash reader because the bridge supports USB 2.0, CompactFlash media, and one ATA or ATAPI device. It is placed between the USB connector and CompactFlash socket, allowing the USB host to enumerate the media as a storage device. Its USB-based board-level manufacturing test function can streamline production checks, although the ATA timing, media initialization procedure, and connector signal assignments must be validated together.

🖥️

Legacy USB-to-IDE Storage Adapter

The CY7C68300C-100AXC can bridge a USB 2.0 host to one ATA or ATAPI storage device in a legacy storage adapter. The controller translates USB transactions into ATA commands while exposing the broader IDE-style connector through the board. The high-impedance ATA interface also permits controlled sharing with another controller such as IEEE 1394, although board-level timing, termination, and bus-arbitration checks remain essential.

🏭

Embedded Industrial Data Logger

The CY7C68300C-100AXC is useful in an embedded data logger that must collect information from CompactFlash or an ATA/ATAPI device and present it through USB 2.0. Its single-device support suits compact systems with one primary storage medium, while USB manufacturing-test support simplifies factory verification. The design should include controlled startup, media fault handling, USB enumeration timing, and thermal review for the 100-pin TQFP device.

🔧

USB Storage Test Fixture

The CY7C68300C-100AXC supports board-level manufacturing tests through the USB interface, making it suitable for production fixtures that exercise USB storage assemblies. Test equipment can use the same connection employed in the finished product to check enumeration and storage-interface behavior. A robust fixture still needs defined test vectors, timeout handling, fault injection, and confirmation that the attached ATA or CompactFlash device responds correctly.

💾

Shared ATA Storage Controller

The CY7C68300C-100AXC is appropriate when an ATA bus must be shared between the USB storage path and another controller such as IEEE 1394. Its ATA interface can enter a high-impedance state, reducing bus contention when it is not selected. Successful implementation depends on correct sequencing of the sharing controllers, validation of ATA signal states in all operating modes, and careful review of connector and firmware arbitration behavior.

💻

Legacy Computer Storage Upgrade

The CY7C68300C-100AXC can support a legacy computer or embedded platform that needs USB 2.0 access to ATA or ATAPI storage. Its EZ-USB AT2LP role combines USB connectivity, ATA command translation, CompactFlash support, and production-test access in one 100-pin TQFP device. Deployment should confirm operating-system compatibility, device firmware requirements, connector standards, and the intended storage-device type before production release.

What is the CY7C68300C-100AXC?
The CY7C68300C-100AXC is an EZ-USB AT2LP bridge controller that converts a USB 2.0 connection into an ATA or ATAPI storage interface. According to the Cypress Semiconductor CY7C68300C datasheet, it supports one ATA or ATAPI device, CompactFlash storage, USB-based board-level manufacturing tests, and a high-impedance ATA interface for bus sharing. The controller is packaged in a 100-pin TQFP measuring 14 mm by 20 mm.
What interfaces does the CY7C68300C-100AXC support?
The CY7C68300C-100AXC supports a USB 2.0 host-side interface and an ATA/ATAPI device-side interface. The manufacturer documentation identifies support for one ATA or ATAPI device and CompactFlash media. It also allows the ATA interface to enter a high-impedance state so the bus can be shared with another controller, including an IEEE 1394 controller.
Where can I download the CY7C68300C-100AXC datasheet PDF?
The CY7C68300C datasheet PDF is available through the Cypress Semiconductor datasheet page identified on this product page. The document covers the EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge, including supported storage devices, manufacturing-test support, ATA high-impedance control, package information, and electrical characteristics. Download the manufacturer PDF before finalizing pin assignments, power sequencing, or PCB layout.
Where can I find the CY7C68300C-100AXC pinout?
The CY7C68300C-100AXC pinout is contained in the pin-description and package-drawing sections of the Cypress Semiconductor CY7C68300C datasheet. The device uses a 100-pin TQFP package, so the complete package diagram contains 100 numbered positions. Use the datasheet diagram rather than a generic 100-pin symbol because exposed or reserved positions and signal names must match the manufacturer drawing exactly.
What is the best drop-in replacement for the CY7C68300C-100AXC?
The CY7C68300A-100AXC is the closest documented same-family replacement because Infineon confirms that the CY7C68300A is pin-compatible with the CY7C68300. Verify firmware support, electrical conditions, ATA behavior, and package qualification before approving it for a new design. No other drop-in substitute is established by the manufacturer compatibility information, so an unverified cross-brand device should not be treated as interchangeable.
Can the CY7C68300A replace the CY7C68300C-100AXC?
Yes, the CY7C68300A family is pin-compatible with the CY7C68300 according to the Infineon compatibility statement. Pin compatibility alone does not guarantee identical firmware or application behavior, so confirm USB enumeration, ATA timing, power requirements, and storage-device interoperability. The CY7C68300A-100AXC is therefore the technically supported starting point for a replacement review.
What can replace the CY7C68300C-100AXC?
The CY7C68300A-100AXC can replace the CY7C68300C-100AXC at the package and pin-connectivity level because the CY7C68300A is pin-compatible with the CY7C68300. Engineers should still compare the electrical limits, firmware behavior, ATA/ATAPI support, CompactFlash requirements, and qualification status for the intended product. No equivalent cross-brand drop-in part is established by the available compatibility information.
When should I choose the CY7C68300C-100AXC over the CY7C68300A-100AXC?
Choose the CY7C68300C-100AXC when an existing design has already qualified that exact controller and its ATA, CompactFlash, or USB behavior. Choose the CY7C68300A-100AXC for a new or replacement design when the current family revision is preferred. Because the CY7C68300A is pin-compatible with the CY7C68300, it can simplify lifecycle planning while preserving the 100-pin PCB footprint.
Is the CY7C68300C-100AXC suitable for CompactFlash readers?
The CY7C68300C-100AXC is suitable for CompactFlash reader designs because the manufacturer datasheet identifies CompactFlash support. It connects the USB 2.0 side to the ATA/ATAPI storage side and supports one ATA or ATAPI device. Layout and firmware validation remain important, particularly for signal integrity, connector pin assignment, media initialization, and compatibility across different CompactFlash device types.
How does the CY7C68300C-100AXC support board-level manufacturing testing?
The CY7C68300C-100AXC supports board-level manufacturing testing through its USB interface. This allows production systems to exercise the device and attached storage path over the same USB connection used for normal operation, reducing fixture complexity. The design should still include a repeatable test sequence, appropriate USB enumeration timing, fault handling, and checks for the ATA or CompactFlash device being attached.
What is the CY7C68300C-100AXC package?
The CY7C68300C-100AXC uses a 100-pin TQFP package with dimensions of 14 mm by 20 mm. The surface-mount package provides the connections required for USB signaling, ATA/ATAPI signaling, control functions, power, and ground. Pin numbering and signal assignments should be taken directly from the manufacturer package drawing, particularly when creating or reusing a PCB footprint.
Can the ATA bus on the CY7C68300C-100AXC be shared?
Yes, the CY7C68300C-100AXC can place its ATA interface in a high-impedance state, also called Hi-Z mode. This allows the ATA bus to be shared with another controller such as an IEEE 1394 controller. Correct bus arbitration depends on control sequencing and firmware, so the enable and disable behavior should be validated with the complete storage subsystem rather than inferred from pin compatibility alone.
How many ATA devices can the CY7C68300C-100AXC support?
The CY7C68300C-100AXC supports one ATA or ATAPI device. It also supports CompactFlash media through the bridge, but the manufacturer documentation identifies support for only one ATA or ATAPI device. Designs requiring multiple concurrent drives need a different bridge or an expanded storage architecture rather than multiple target devices on this controller.
Where can I buy the CY7C68300C-100AXC and check its lead time?
Use the Request a Quote form on this page to ask for CY7C68300C-100AXC availability, quantity breaks, packaging details, and current lead time. The device is identified in the 100-pin TQFP configuration as a USB 2.0 to ATA/ATAPI bridge. A quotation request ensures the response reflects the exact manufacturer part number, selected package form, current lifecycle status, and required production quantity.
What are the key specifications of the CY7C68300C-100AXC?
The key specifications are USB 2.0 connectivity, support for one ATA or ATAPI device, CompactFlash support, USB-based board-level manufacturing test, ATA high-impedance bus sharing, and a 100-pin TQFP package measuring 14 mm by 20 mm. According to the Cypress Semiconductor CY7C68300C datasheet, these functions position the device for CompactFlash readers, USB storage adapters, embedded logging systems, and legacy storage-interface bridging.

بيانات مرجعية هندسية لـ CY7C68300C-100AXC — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the CY7C68300C-100AXC when the design is already qualified around that exact EZ-USB AT2LP controller, or when an existing 100-TQFP USB-to-ATA design benefits from its USB 2.0 interface, CompactFlash support, manufacturing-test access, and ATA high-impedance mode. The CY7C68300A-100AXC is the preferred same-family replacement for new lifecycle planning because Infineon confirms pin compatibility with the CY7C68300. Review firmware behavior, electrical limits, and qualification requirements before substitution. Do not select a cross-brand interface IC solely because it uses a 100-pin TQFP package; functional equivalence, USB device implementation, ATA timing, and bus-control behavior are more important than package count alone.

المقارنة مع البدائل

المعامل هذا المنتج CY7C68300A-100AXC
Product Type EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge EZ-USB AT2LP family bridge
Package 100-TQFP (14x20) 100-TQFP (14x20)
Brand Infineon Technologies Infineon Technologies
USB Interface USB 2.0 USB 2.0
ATA Device Support 1 ATA or ATAPI device 1 ATA or ATAPI device
CompactFlash Support Supported Supported
Manufacturing Test Supported through USB interface Supported through USB interface
ATA High-Impedance Mode Supported Supported
Pin Compatibility Target device Pin-compatible with CY7C68300
Package Pin Count 100 pins 100 pins

أبرز الفروقات

  • USB manufacturing-test access (مقابلCY7C68300A-100AXC)
  • Shared ATA bus capability (مقابلCY7C68300A-100AXC)
  • Single-device storage architecture (مقابلCY7C68300A-100AXC)

ملاحظات التصميم

Route the USB differential pair as a controlled-impedance pair with closely matched length and uninterrupted reference plane. Keep the USB connector, protection network, and controller positioned to minimize loop area and trace stubs. ATA and ATAPI traces should follow the manufacturer layout guidance, with attention to crosstalk, return paths, and the high-impedance control state.

Place the CY7C68300C-100AXC close to the USB and storage connectors while maintaining the clearances required by the 100-pin TQFP footprint. Decoupling and ground-plane connections must follow the manufacturer pin guidance. Confirm every pin against the datasheet package drawing, including reserved and power positions, because a generic 100-pin symbol can assign signals incorrectly.

Do not treat pin compatibility as proof of identical firmware behavior. When replacing the CY7C68300C-100AXC with the CY7C68300A-100AXC, retest USB enumeration, ATA command timing, CompactFlash initialization, bus sharing, and manufacturing-test operation. Also confirm that only one ATA or ATAPI device is attached to the bus and manage high-impedance transitions correctly.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The device is an industrial and commercial interface controller; no AEC-Q100 qualification is stated. Compliance status should be confirmed against the manufacturer declaration applicable to the ordered part and package.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

CY7C68300C-100AXC datasheet CY7C68300C-100AXC pinout CY7C68300C-100AXC datasheet pdf CY7C68300C-100AXC equivalent CY7C68300C-100AXC replacement CY7C68300C-100AXC drop-in replacement CY7C68300C-100AXC USB ATA bridge CY7C68300C-100AXC CompactFlash controller CY7C68300C-100AXC 100 TQFP Infineon CY7C68300C-100AXC price CY7C68300C-100AXC stock CY7C68300C-100AXC vs CY7C68300A-100AXC

المكونات والمصطلحات ذات الصلة

Infineon Technologies Cypress Semiconductor CY7C68300C-100AXC CY7C68300A-100AXC EZ-USB AT2LP USB bridge controller USB 2.0 ATA ATAPI CompactFlash IEEE 1394 100-pin TQFP TQFP package family surface-mount package SMD embedded processor USB host interface ATA high-impedance mode Hi-Z board-level manufacturing test storage controller USB-to-ATA adapter
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر