CY7C68300C-100AXC - USB 2.0 to ATA Bridge | Infineon
MPN: CY7C68300C-100AXC ✓ פעילCY7C68300C-100AXC סקירה
A USB-to-ATA bridge is an interface controller that translates USB transactions into ATA and ATAPI commands used by conventional storage devices. Within the semiconductor hierarchy, this device combines a USB device controller, ATA/ATAPI host interface, embedded firmware, and USB connectivity. Its primary role is to let a USB-equipped computer or embedded host use storage peripherals that originally use the parallel ATA interface.
The bridge supports one ATA or ATAPI device and CompactFlash media through its storage-side interface. It also supports board-level manufacturing testing through the USB interface, reducing the need for a separate fixture interface during production. The ATA interface can be placed in a high-impedance state, allowing the bus to be shared with another controller such as an IEEE 1394 controller.
The USB side supports USB 2.0 operation, making the controller suitable for systems requiring a standards-compliant USB connection to CompactFlash or ATA-based storage. The 100-pin TQFP package provides a substantial number of interface, control, power, and ground connections, supporting both host-side USB signaling and the wider ATA bus.
Typical applications include CompactFlash card readers, USB-to-IDE adapters, embedded data loggers, industrial storage gateways, test equipment, and legacy computer upgrades. The integrated USB manufacturing-test capability is particularly useful in high-volume production because it allows configuration and functional checks through the same USB connection used during normal operation.
PCB design requires careful routing of the ATA and ATAPI signals, including the differential USB pair and associated signal-integrity considerations. The device should be placed close to its connectors and storage-interface circuitry, with short return paths and controlled impedance routing for the USB differential pair. Power and ground-pin distribution should follow the manufacturer’s package and reference-layout guidance.
This page combines the device identity, package details, interface capabilities, replacement guidance, comparison criteria, and practical implementation considerations needed to evaluate the CY7C68300C-100AXC for a USB storage interface. Use the manufacturer datasheet pin-description table and recommended layout when assigning every PCB connection.
חלופות תחליף ישיר עבור CY7C68300C-100AXC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
CY7C68300A-100AXC
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
CY7C68300C-100AXC מפרטים
| Device Type | USB 2.0 to ATA/ATAPI bridge controller |
| USB Interface Version | USB 2.0 |
| ATA Device Support | 1 ATA or ATAPI device |
| CompactFlash Support | Supported |
| Manufacturing Test Interface | USB interface |
| ATA Bus Sharing | High-impedance mode supported |
| Package Type | 100-pin TQFP |
| Package Dimensions | 14 mm x 20 mm |
| מספר פינים | 100 pins |
| סוג הרכבה | Surface mount |
| Product Series | EZ-USB AT2LP |
| Device Category | USB bridge controller |
| Storage Interface | ATA and ATAPI |
| Bus Sharing Example | IEEE 1394 controller |
מדריך תצורת פינים של CY7C68300C-100AXC 14 mm x 20 mm
תצורת פינים עבור CY7C68300C-100AXC (מארזת 14 mm x 20 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור CY7C68300C-100AXC.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
CY7C68300C-100AXC מתאים עבור 6 יישוםs: USB CompactFlash Card Reader, Legacy USB-to-IDE Storage Adapter, Embedded Industrial Data Logger, USB Storage Test Fixture, Shared ATA Storage Controller, Legacy Computer Storage Upgrade.
USB CompactFlash Card Reader
The CY7C68300C-100AXC fits a USB CompactFlash reader because the bridge supports USB 2.0, CompactFlash media, and one ATA or ATAPI device. It is placed between the USB connector and CompactFlash socket, allowing the USB host to enumerate the media as a storage device. Its USB-based board-level manufacturing test function can streamline production checks, although the ATA timing, media initialization procedure, and connector signal assignments must be validated together.
מומלץ
Legacy USB-to-IDE Storage Adapter
The CY7C68300C-100AXC can bridge a USB 2.0 host to one ATA or ATAPI storage device in a legacy storage adapter. The controller translates USB transactions into ATA commands while exposing the broader IDE-style connector through the board. The high-impedance ATA interface also permits controlled sharing with another controller such as IEEE 1394, although board-level timing, termination, and bus-arbitration checks remain essential.
מומלץ
Embedded Industrial Data Logger
The CY7C68300C-100AXC is useful in an embedded data logger that must collect information from CompactFlash or an ATA/ATAPI device and present it through USB 2.0. Its single-device support suits compact systems with one primary storage medium, while USB manufacturing-test support simplifies factory verification. The design should include controlled startup, media fault handling, USB enumeration timing, and thermal review for the 100-pin TQFP device.
מומלץ
USB Storage Test Fixture
The CY7C68300C-100AXC supports board-level manufacturing tests through the USB interface, making it suitable for production fixtures that exercise USB storage assemblies. Test equipment can use the same connection employed in the finished product to check enumeration and storage-interface behavior. A robust fixture still needs defined test vectors, timeout handling, fault injection, and confirmation that the attached ATA or CompactFlash device responds correctly.
מומלץ
Shared ATA Storage Controller
The CY7C68300C-100AXC is appropriate when an ATA bus must be shared between the USB storage path and another controller such as IEEE 1394. Its ATA interface can enter a high-impedance state, reducing bus contention when it is not selected. Successful implementation depends on correct sequencing of the sharing controllers, validation of ATA signal states in all operating modes, and careful review of connector and firmware arbitration behavior.
מומלץ
Legacy Computer Storage Upgrade
The CY7C68300C-100AXC can support a legacy computer or embedded platform that needs USB 2.0 access to ATA or ATAPI storage. Its EZ-USB AT2LP role combines USB connectivity, ATA command translation, CompactFlash support, and production-test access in one 100-pin TQFP device. Deployment should confirm operating-system compatibility, device firmware requirements, connector standards, and the intended storage-device type before production release.
מומלץ
נתוני עזר הנדסיים עבור CY7C68300C-100AXC — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | CY7C68300A-100AXC |
|---|---|---|
| Product Type | EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge | EZ-USB AT2LP family bridge |
| Package | 100-TQFP (14x20) | 100-TQFP (14x20) |
| Brand | Infineon Technologies | Infineon Technologies |
| USB Interface | USB 2.0 | USB 2.0 |
| ATA Device Support | 1 ATA or ATAPI device | 1 ATA or ATAPI device |
| CompactFlash Support | Supported | Supported |
| Manufacturing Test | Supported through USB interface | Supported through USB interface |
| ATA High-Impedance Mode | Supported | Supported |
| Pin Compatibility | Target device | Pin-compatible with CY7C68300 |
| Package Pin Count | 100 pins | 100 pins |
מבדילים עיקריים
- USB manufacturing-test access (לעומתCY7C68300A-100AXC)
- Shared ATA bus capability (לעומתCY7C68300A-100AXC)
- Single-device storage architecture (לעומתCY7C68300A-100AXC)
הערות תכנון
Route the USB differential pair as a controlled-impedance pair with closely matched length and uninterrupted reference plane. Keep the USB connector, protection network, and controller positioned to minimize loop area and trace stubs. ATA and ATAPI traces should follow the manufacturer layout guidance, with attention to crosstalk, return paths, and the high-impedance control state.
Place the CY7C68300C-100AXC close to the USB and storage connectors while maintaining the clearances required by the 100-pin TQFP footprint. Decoupling and ground-plane connections must follow the manufacturer pin guidance. Confirm every pin against the datasheet package drawing, including reserved and power positions, because a generic 100-pin symbol can assign signals incorrectly.
Do not treat pin compatibility as proof of identical firmware behavior. When replacing the CY7C68300C-100AXC with the CY7C68300A-100AXC, retest USB enumeration, ATA command timing, CompactFlash initialization, bus sharing, and manufacturing-test operation. Also confirm that only one ATA or ATAPI device is attached to the bus and manage high-impedance transitions correctly.
מידע על תאימות
The device is an industrial and commercial interface controller; no AEC-Q100 qualification is stated. Compliance status should be confirmed against the manufacturer declaration applicable to the ordered part and package.