CY8C3444PVI-101 - 50MHz 16KB PSoC 3 MCU | Infineon
MPN: CY8C3444PVI-101 ✓ نشطCY8C3444PVI-101 نظرة عامة
A programmable system-on-chip, or PSoC, integrates a microcontroller core, programmable digital and analog resources, and configurable peripherals into one semiconductor package. The CY8C3444 belongs to the CY8C34xx family of 8051-compatible devices. This product hierarchy places the PSoC 3 platform below the broader categories of programmable system-on-chip, embedded microcontroller, and semiconductor.
The principal device characteristics are a 50 MHz maximum clock, 16 KB flash organized as 16K × 8 bits, an 8-bit 8051 processor architecture, and operation from a 3.3 V supply. The 48-BSSOP package provides a surface-mount footprint approximately 0.295 inches, or 7.50 mm, wide. These figures identify the part as a compact embedded controller suitable for products requiring local programmable control and mixed signal functionality.
The CY8C3444 architecture combines an embedded 8051-compatible processing core with PSoC programmable resources. This arrangement allows firmware to control digital routing and analog functions through the device's configuration fabric rather than relying exclusively on fixed peripheral blocks. The precise resource counts, converter performance, GPIO organization, and detailed electrical limits must be confirmed in the manufacturer datasheet before a production design is released.
Typical uses include industrial control panels, compact sensor interfaces, building equipment, consumer controls, and embedded instruments that require programmable logic alongside a microcontroller. The surface-mount BSSOP package also supports space-conscious designs where a small PCB area and automated assembly are priorities. Firmware configuration and peripheral assignment should be completed with the manufacturer-supported PSoC development environment.
Designers should preserve the 3.3 V operating condition, confirm every signal level against the manufacturer electrical characteristics, and validate the selected PSoC configuration against the application requirements. The 48-pin package also requires careful PCB planning so that power routing, decoupling, programming access, and unused pins are handled according to the device guidance.
This page consolidates the available device identity, package, memory, clock, sourcing, and substitution information while separating confirmed characteristics from parameters that require validation against the manufacturer datasheet.
بدائل مباشرة لـ CY8C3444PVI-101 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع CY8C3444PVI-101 (نفس عامل الشكل والبصمة) — يختلف في Package, Flash Memory, Product Type.
CY8C3444PVI-100
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←CY8C3444PVI-103
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←CY8C3444PVI-101 الحدود القصوى والخصائص الكهربائية
| Product Type | PSoC 3 system-on-chip microcontroller |
| Processor Architecture | 8051-compatible 8-bit |
| Maximum Operating Frequency | 50 MHz |
| Flash Memory | 16 KB (16K × 8 bits) |
| جهد التغذية | 3.3 V |
| العلبة | 48-BSSOP |
| Package Body Width | 7.50 mm |
| Package Body Width | 0.295 inch |
| نوع التركيب | Surface mount |
| Programmable Device | PSoC 3 architecture |
| CPU Instruction Width | 8 bit |
دليل تكوين أطراف CY8C3444PVI-101 0.295 inch
تكوين الأطراف لـ CY8C3444PVI-101 (حزمة 0.295 inch). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CY8C3444PVI-101.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
CY8C3444PVI-101 مناسب لـ 6 التطبيقs: Industrial Control Panel, Building Equipment Controller, Compact Sensor Interface, Consumer Control Module, Embedded Test and Control Instrument, LED Lighting Controller.
Industrial Control Panel
The CY8C3444PVI-101 fits compact control-panel electronics that need local decision-making, programmable logic, and embedded flash in one package. Its 50 MHz 8051-compatible processor supports responsive handling of button inputs, indicators, and internal state while the PSoC 3 architecture can consolidate application-specific control functions. The 3.3 V supply rating simplifies integration with modern logic levels. Before finalizing the design, confirm the exact GPIO count, analog resources, operating-temperature range, and ESD requirements in the manufacturer datasheet, then validate the PSoC configuration against worst-case control-loop timing.
Building Equipment Controller
The CY8C3444PVI-101 is appropriate for distributed building-equipment controllers that combine sensing, local logic, and communications in a small board. Its 16 KB flash provides space for a dedicated firmware image, while the 50 MHz clock allows responsive state-machine and supervisory functions. The 48-BSSOP package can reduce board footprint compared with larger leaded controllers, although the body width is still 7.50 mm. Validate relay-drive isolation, sensor input ranges, power-supply tolerances, and environmental limits because these application-specific requirements are not established by the core 50 MHz, 16 KB, and 3.3 V device ratings.
Compact Sensor Interface
The CY8C3444PVI-101 can serve as the controller in a compact sensor interface where acquisition, filtering, threshold evaluation, and data formatting must be combined. The PSoC 3 platform allows peripheral resources to be configured for the design rather than relying only on a fixed hardware arrangement. Its 50 MHz 8051-compatible core provides headroom for interrupt-driven acquisition and protocol formatting, and 16 KB flash can hold application code plus configuration data. Confirm ADC resolution, sample-rate limits, op-amp characteristics, and programmable-resource availability in the manufacturer datasheet before committing the signal chain.
Consumer Control Module
The CY8C3444PVI-101 works well in a compact consumer-control module requiring embedded logic and programmable mixed-signal behavior without a separate high-performance processor. Its 8-bit 8051-compatible architecture and 50 MHz clock are suitable for debouncing, state management, display or indicator control, and product-specific sequencing. The 3.3 V supply rating aligns with many compact power rails, while the 48-BSSOP surface-mount package supports automated assembly. The designer must confirm RAM, package dimensions, programming interface, and production test requirements, since these details must be selected from the device documentation before PCB release.
Embedded Test and Control Instrument
The CY8C3444PVI-101 can support the control side of an embedded measurement instrument where a dedicated CPU, programmable signal resources, and compact storage are useful. At up to 50 MHz, the 8051-compatible core can manage sequencing, acquisition control, calibration tables, and a communications interface. Sixteen kilobytes of flash is suitable for targeted embedded firmware, although complete instrument software should be size-checked against the final application. Verify analog measurement accuracy, calibration mechanisms, supply tolerance, and timing requirements against the manufacturer datasheet because the core device specifications do not establish instrument-level performance.
LED Lighting Controller
The CY8C3444PVI-101 is applicable to an LED lighting controller that requires programmable timing, local fault handling, and a compact embedded footprint. The PSoC 3 architecture can assign digital functions and analog resources around the lighting-control requirement, while the 50 MHz processor handles dimming sequences, button logic, and status functions. Its 3.3 V rating is compatible with appropriately designed control electronics, but the LED driver itself must handle the power stage and any dimming polarity requirements. Confirm PWM-capable resources, operating-temperature limits, and analog timing performance in the manufacturer datasheet before finalizing the lighting board.
بيانات مرجعية هندسية لـ CY8C3444PVI-101 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | CY8C3444PVI-100 | CY8C3444PVI-103 |
|---|---|---|---|
| Package | 48-BSSOP | 48-SSOP | 48-SSOP |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx |
أبرز الفروقات
- Confirmed 50 MHz operating frequency (مقابلCY8C3444PVI-100)
- Confirmed 16 KB flash organization (مقابلCY8C3444PVI-100)
- Identified 8051 PSoC 3 family platform (مقابلCY8C3444PVI-100)
ملاحظات التصميم
Assign the PCB footprint from the manufacturer package drawing for the exact 48-BSSOP ordering code. Maintain short ground and supply-return paths, place decoupling capacitors close to the associated device pins, and provide adequate copper area for the 3.3 V rail. Do not infer pad geometry from the generic 48-SSOP description alone because body width, lead pitch, and exposed features must be checked against the official drawing.
Do not treat the -100, -101, and -103 suffixes as interchangeable without checking the manufacturer ordering table. The -100 and -101 candidates are explicitly associated with 50 MHz and 16 KB flash, but the numeric grade-specific differences are not stated in the available listing. Review temperature range, qualification, device revision, and ordering options before approving either part as a substitution.
Design the 3.3 V supply with appropriate startup, steady-state, and transient margins for the selected PSoC configuration. Place bulk and local decoupling according to the manufacturer application guidance, and verify current limits for all simultaneously enabled analog and digital blocks. Because the exact current consumption and peripheral configuration can alter demand, measure worst-case behavior across voltage and temperature rather than relying on a single nominal figure.
Separate sensitive analog inputs, programming signals, and switching nodes in the layout, especially when programmable analog resources are used. Follow the manufacturer grounding and reference guidance for analog and digital sections. Review every pin in the 48-pin package, including power, ground, programming, reset, and no-connect positions, against the exact datasheet before releasing the schematic or PCB layout.
معلومات الامتثال
No explicit compliance declarations are stated in the available technical information.