CY8C3444PVI-101 - 50MHz 16KB PSoC 3 MCU | Infineon
部品番号: CY8C3444PVI-101 ✓ 生産中CY8C3444PVI-101 概要
A programmable system-on-chip, or PSoC, integrates a microcontroller core, programmable digital and analog resources, and configurable peripherals into one semiconductor package. The CY8C3444 belongs to the CY8C34xx family of 8051-compatible devices. This product hierarchy places the PSoC 3 platform below the broader categories of programmable system-on-chip, embedded microcontroller, and semiconductor.
The principal device characteristics are a 50 MHz maximum clock, 16 KB flash organized as 16K × 8 bits, an 8-bit 8051 processor architecture, and operation from a 3.3 V supply. The 48-BSSOP package provides a surface-mount footprint approximately 0.295 inches, or 7.50 mm, wide. These figures identify the part as a compact embedded controller suitable for products requiring local programmable control and mixed signal functionality.
The CY8C3444 architecture combines an embedded 8051-compatible processing core with PSoC programmable resources. This arrangement allows firmware to control digital routing and analog functions through the device's configuration fabric rather than relying exclusively on fixed peripheral blocks. The precise resource counts, converter performance, GPIO organization, and detailed electrical limits must be confirmed in the manufacturer datasheet before a production design is released.
Typical uses include industrial control panels, compact sensor interfaces, building equipment, consumer controls, and embedded instruments that require programmable logic alongside a microcontroller. The surface-mount BSSOP package also supports space-conscious designs where a small PCB area and automated assembly are priorities. Firmware configuration and peripheral assignment should be completed with the manufacturer-supported PSoC development environment.
Designers should preserve the 3.3 V operating condition, confirm every signal level against the manufacturer electrical characteristics, and validate the selected PSoC configuration against the application requirements. The 48-pin package also requires careful PCB planning so that power routing, decoupling, programming access, and unused pins are handled according to the device guidance.
This page consolidates the available device identity, package, memory, clock, sourcing, and substitution information while separating confirmed characteristics from parameters that require validation against the manufacturer datasheet.
ドロップイン代替品: CY8C3444PVI-101 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: CY8C3444PVI-101 (同一形状・フットプリント) — 相違点: Package, Flash Memory, Product Type.
CY8C3444PVI-100
✅ ドロップイン価格はお問い合わせください
データシートを見る →CY8C3444PVI-103
✅ ドロップイン価格はお問い合わせください
データシートを見る →CY8C3444PVI-101 最大定格&電気的特性
| Product Type | PSoC 3 system-on-chip microcontroller |
| Processor Architecture | 8051-compatible 8-bit |
| Maximum Operating Frequency | 50 MHz |
| Flash Memory | 16 KB (16K × 8 bits) |
| 電源電圧 | 3.3 V |
| パッケージ | 48-BSSOP |
| Package Body Width | 7.50 mm |
| Package Body Width | 0.295 inch |
| 実装タイプ | Surface mount |
| Programmable Device | PSoC 3 architecture |
| CPU Instruction Width | 8 bit |
CY8C3444PVI-101 0.295 inch ピン配置ガイド
CY8C3444PVI-101 (0.295 inch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CY8C3444PVI-101.
詳細は データシート をご参照ください。
主な用途
CY8C3444PVI-101 の用途: 6 件s: Industrial Control Panel, Building Equipment Controller, Compact Sensor Interface, Consumer Control Module, Embedded Test and Control Instrument, LED Lighting Controller.
Industrial Control Panel
The CY8C3444PVI-101 fits compact control-panel electronics that need local decision-making, programmable logic, and embedded flash in one package. Its 50 MHz 8051-compatible processor supports responsive handling of button inputs, indicators, and internal state while the PSoC 3 architecture can consolidate application-specific control functions. The 3.3 V supply rating simplifies integration with modern logic levels. Before finalizing the design, confirm the exact GPIO count, analog resources, operating-temperature range, and ESD requirements in the manufacturer datasheet, then validate the PSoC configuration against worst-case control-loop timing.
Building Equipment Controller
The CY8C3444PVI-101 is appropriate for distributed building-equipment controllers that combine sensing, local logic, and communications in a small board. Its 16 KB flash provides space for a dedicated firmware image, while the 50 MHz clock allows responsive state-machine and supervisory functions. The 48-BSSOP package can reduce board footprint compared with larger leaded controllers, although the body width is still 7.50 mm. Validate relay-drive isolation, sensor input ranges, power-supply tolerances, and environmental limits because these application-specific requirements are not established by the core 50 MHz, 16 KB, and 3.3 V device ratings.
Compact Sensor Interface
The CY8C3444PVI-101 can serve as the controller in a compact sensor interface where acquisition, filtering, threshold evaluation, and data formatting must be combined. The PSoC 3 platform allows peripheral resources to be configured for the design rather than relying only on a fixed hardware arrangement. Its 50 MHz 8051-compatible core provides headroom for interrupt-driven acquisition and protocol formatting, and 16 KB flash can hold application code plus configuration data. Confirm ADC resolution, sample-rate limits, op-amp characteristics, and programmable-resource availability in the manufacturer datasheet before committing the signal chain.
Consumer Control Module
The CY8C3444PVI-101 works well in a compact consumer-control module requiring embedded logic and programmable mixed-signal behavior without a separate high-performance processor. Its 8-bit 8051-compatible architecture and 50 MHz clock are suitable for debouncing, state management, display or indicator control, and product-specific sequencing. The 3.3 V supply rating aligns with many compact power rails, while the 48-BSSOP surface-mount package supports automated assembly. The designer must confirm RAM, package dimensions, programming interface, and production test requirements, since these details must be selected from the device documentation before PCB release.
Embedded Test and Control Instrument
The CY8C3444PVI-101 can support the control side of an embedded measurement instrument where a dedicated CPU, programmable signal resources, and compact storage are useful. At up to 50 MHz, the 8051-compatible core can manage sequencing, acquisition control, calibration tables, and a communications interface. Sixteen kilobytes of flash is suitable for targeted embedded firmware, although complete instrument software should be size-checked against the final application. Verify analog measurement accuracy, calibration mechanisms, supply tolerance, and timing requirements against the manufacturer datasheet because the core device specifications do not establish instrument-level performance.
LED Lighting Controller
The CY8C3444PVI-101 is applicable to an LED lighting controller that requires programmable timing, local fault handling, and a compact embedded footprint. The PSoC 3 architecture can assign digital functions and analog resources around the lighting-control requirement, while the 50 MHz processor handles dimming sequences, button logic, and status functions. Its 3.3 V rating is compatible with appropriately designed control electronics, but the LED driver itself must handle the power stage and any dimming polarity requirements. Confirm PWM-capable resources, operating-temperature limits, and analog timing performance in the manufacturer datasheet before finalizing the lighting board.
エンジニアリング参考データ: CY8C3444PVI-101 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | CY8C3444PVI-100 | CY8C3444PVI-103 |
|---|---|---|---|
| Package | 48-BSSOP | 48-SSOP | 48-SSOP |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx |
主な差別化要因
- Confirmed 50 MHz operating frequency (vs CY8C3444PVI-100)
- Confirmed 16 KB flash organization (vs CY8C3444PVI-100)
- Identified 8051 PSoC 3 family platform (vs CY8C3444PVI-100)
設計ノート
Assign the PCB footprint from the manufacturer package drawing for the exact 48-BSSOP ordering code. Maintain short ground and supply-return paths, place decoupling capacitors close to the associated device pins, and provide adequate copper area for the 3.3 V rail. Do not infer pad geometry from the generic 48-SSOP description alone because body width, lead pitch, and exposed features must be checked against the official drawing.
Do not treat the -100, -101, and -103 suffixes as interchangeable without checking the manufacturer ordering table. The -100 and -101 candidates are explicitly associated with 50 MHz and 16 KB flash, but the numeric grade-specific differences are not stated in the available listing. Review temperature range, qualification, device revision, and ordering options before approving either part as a substitution.
Design the 3.3 V supply with appropriate startup, steady-state, and transient margins for the selected PSoC configuration. Place bulk and local decoupling according to the manufacturer application guidance, and verify current limits for all simultaneously enabled analog and digital blocks. Because the exact current consumption and peripheral configuration can alter demand, measure worst-case behavior across voltage and temperature rather than relying on a single nominal figure.
Separate sensitive analog inputs, programming signals, and switching nodes in the layout, especially when programmable analog resources are used. Follow the manufacturer grounding and reference guidance for analog and digital sections. Review every pin in the 48-pin package, including power, ground, programming, reset, and no-connect positions, against the exact datasheet before releasing the schematic or PCB layout.
コンプライアンス情報
No explicit compliance declarations are stated in the available technical information.