CY8C3445PVI-088 - 50MHz 32KB Flash MCU | Infineon
MPN: CY8C3445PVI-088 ✗ انتهى عمره الإنتاجيCY8C3445PVI-088 نظرة عامة
A programmable system-on-chip, or PSoC, integrates a microcontroller core with configurable peripheral blocks on one semiconductor device. The PSoC 3 family uses an 8-bit 8051-compatible core and provides programmable resources that can support control, communication, analog measurement, and mixed-signal product designs. This system-level integration can reduce external component requirements while allowing peripheral behavior to be adapted in firmware.
Key device attributes include a 50 MHz operating frequency, 32 KB of Flash program memory, and a 1.71 V to 5.5 V supply range. Flash memory supports in-system reprogramming, allowing firmware updates without removing the microcontroller from its finished assembly. The 48-pin SSOP package provides a surface-mount format suitable for compact control boards, industrial modules, and embedded products requiring more I/O than a small-lead-count package can offer.
The CY8C3445 belongs to the CY8C34 family of ultra-low-power Flash-programmable PSoC 3 devices. Its configurable blocks can be assigned to digital functions, analog functions, timers, serial communication, and other mixed-signal tasks. This architecture allows a product designer to implement application-specific control logic around one microcontroller rather than relying on a fixed collection of peripheral functions.
Typical uses include industrial control panels, building automation, sensor-conditioning systems, compact power-management controllers, communication equipment, and low-power embedded products. The 1.71 V minimum operating voltage supports systems with low-voltage rails, while the 5.5 V maximum operating voltage accommodates conventional 5 V industrial and consumer equipment. Firmware configuration must be checked against the system supply and clock requirements.
PCB design should preserve the power, ground, decoupling, programming, and exposed signal paths defined by the manufacturer pin description. Place local supply bypass capacitors close to the device, route sensitive analog signals away from high-current switching paths, and include programming access in the board test fixture. Confirm the exact peripheral assignments, clock limits, startup behavior, and pin multiplexing in the CY8C34 family datasheet before releasing firmware.
This product page combines the device's confirmed memory, frequency, voltage, core, and package characteristics with application guidance, comparison information, and engineering-focused design notes. These details support faster component selection while keeping design decisions tied to the manufacturer documentation.
بدائل مباشرة لـ CY8C3445PVI-088 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع CY8C3445PVI-088 (نفس عامل الشكل والبصمة) — يختلف في Package, Mounting Type, SRAM, Device Type, Processor Core.
CY8C3445PVI-094
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←CY8C3445PVI-088 الحدود القصوى والخصائص الكهربائية
| Product Type | Flash-programmable system-on-chip microcontroller |
| Device Family | CY8C34 / PSoC 3 |
| Processor Core | 8-bit 8051 |
| أقصى تردد للساعة | 50 MHz |
| Flash Memory | 32 KB |
| SRAM | 4 kByte |
| Operating Voltage Range | 1.71 V to 5.5 V |
| العلبة | 48-pin SSOP |
| نوع التركيب | Surface mount |
| Program Memory Type | Flash |
| Architecture | Configurable PSoC 3 architecture |
دليل تكوين أطراف CY8C3445PVI-088 48-pin ssop
تكوين الأطراف لـ CY8C3445PVI-088 (حزمة 48-pin ssop). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CY8C3445PVI-088.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
CY8C3445PVI-088 مناسب لـ 6 التطبيقs: Industrial Control Panel, Building Automation Node, Sensor Conditioning and Acquisition, Low-Power Embedded Controller, Communication Equipment Interface, Compact Power-Supply Sequencer.
Industrial Control Panel
The CY8C3445PVI-088 fits compact industrial control panels that combine user inputs, indicators, sensors, and communications in one controller. Its 50 MHz 8051 core provides deterministic execution for state machines, debouncing, interlocks, and supervisory logic, while 32 KB of Flash holds application firmware and 4 kByte of SRAM supports working data. The configurable PSoC 3 resources can consolidate digital I/O, timer, and communication functions. The 1.71 V to 5.5 V range accommodates low-voltage logic and conventional 5 V control electronics. Designers should still match the exact ordering option to the enclosure temperature, isolate external field wiring, and use the manufacturer pin table to assign multiplexed functions.
موصى به
Building Automation Node
The CY8C3445PVI-088 is appropriate for distributed building-automation nodes that monitor inputs and control lighting, HVAC, or access equipment. Its low-voltage operating range of 1.71 V to 5.5 V supports power-efficient sensor interfaces, while the 8-bit 8051 core manages protocol handling and local decisions. The 32 KB Flash stores application code and configuration, and 4 kByte of SRAM accommodates message and state buffers. PSoC 3 configurable blocks can reduce the need for separate peripheral devices when firmware assigns timer, serial, and signal functions correctly. For reliable operation, follow the manufacturer startup requirements, protect long cable-connected inputs, and validate timing margins under worst-case bus traffic.
موصى به
Sensor Conditioning and Acquisition
The CY8C3445PVI-088 can serve as the control and acquisition processor in a compact mixed-signal sensor module. The PSoC 3 architecture places configurable analog and digital resources beside a 50 MHz 8051 core, allowing firmware to configure measurement behavior and process acquired data. Its 32 KB of Flash is suitable for calibration tables, filtering algorithms, and field-updateable logic, while 4 kByte of SRAM supports sample buffers and working state. The 1.71 V to 5.5 V range permits operation from low-energy sensor rails. Achieved measurement performance will depend on the selected analog block, reference source, input filtering, and grounding. Follow the family datasheet for the exact converter resolution and pin assignments rather than assuming another CY8C34 member's configuration.
موصى به
Low-Power Embedded Controller
The CY8C3445PVI-088 suits compact embedded controllers that need local processing without a high-power application processor. Its 8-bit architecture can execute acquisition, actuator, and communications tasks efficiently, while the 32 KB Flash provides room for embedded firmware and 4 kByte of SRAM supports active state. A 1.71 V minimum operating voltage is useful for battery-derived and energy-harvesting subsystems that regulate a low-voltage rail. The device also offers a familiar 8051 software base and configurable PSoC peripherals. Product developers should minimize active processing time, disable unused resources, and confirm the manufacturer power-management modes and wake sources for the exact ordering option. Supply decoupling must be designed for the expected current transitions rather than the nominal operating voltage alone.
موصى به
Communication Equipment Interface
The CY8C3445PVI-088 can implement a dedicated interface controller for communication equipment requiring local protocol management and configurable signal functions. Its 50 MHz 8051 core supports frame handling, status reporting, configuration storage, and supervisory logic, while the PSoC 3 configurable blocks can support timer-based transfers and serial functions. With 32 KB of Flash and 4 kByte of SRAM, the device is practical for gateways, protocol converters, and equipment-control modules that do not require a high-end Cortex-class processor. The 1.71 V to 5.5 V supply range also eases integration with mixed-voltage logic. Designers should assign peripheral pins according to the manufacturer table, provide proper level translation for external interfaces, and verify protocol timing under maximum data rates.
موصى به
Compact Power-Supply Sequencer
The CY8C3445PVI-088 can control a compact multi-rail power system by monitoring enable signals, sequencing supplies, and coordinating fault reporting. The 50 MHz 8051 core is fast enough for deterministic supervisory tasks, and the 32 KB Flash can store configuration tables and a state machine. The 1.71 V to 5.5 V range allows operation from the auxiliary rail used by many controller boards, while configurable timers and digital blocks simplify implementation. The device should supervise rather than carry primary switching current; use suitable power devices for the power stage. Keep high-di/dt switching loops physically separate from the controller ground path, and verify every rail's startup voltage and delay against the timing requirements of the downstream loads.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ CY8C3445PVI-088 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | CY8C3445PVI-094 |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | 48-pin SSOP | 48-SSOP |
| Product Type | 8-bit PSoC 3 microcontroller | PSoC 3 MCU |
| Processor Core | 8051, 8-bit | 8051, 8-bit |
| Maximum Clock Frequency | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 32 kByte |
| SRAM | 4 kByte | 4 kByte |
| Program Memory | Flash | Flash |
| Architecture | Configurable PSoC 3 | PSoC 3 |
أبرز الفروقات
- Same-package same-family substitution path (مقابلCY8C3445PVI-094)
- Configurable PSoC 3 mixed-signal architecture (مقابلCY8C3445PVI-094)
- Wide embedded supply compatibility (مقابلCY8C3445PVI-094)
ملاحظات التصميم
Design the CY8C3445PVI-088 supply within the manufacturer-defined 1.71 V to 5.5 V range. Place the required bypass capacitors close to the associated supply and ground pins, using the smallest practical loop between each capacitor and the device. Route supply and return paths away from sensitive analog inputs, and use a ground plane that remains continuous beneath the SSOP footprint. Confirm startup voltage, reset release, and peripheral clock requirements against the family datasheet before defining the power tree.
Treat the 48-pin SSOP footprint as a dense mixed-signal routing problem. Assign board functions to pins from the manufacturer pin-description table before finalizing the schematic, because PSoC peripherals can map to different pins through configuration. Keep programming, reset, and clock nets short, avoid routing fast digital outputs beneath analog inputs, and place external timing and storage components close to their associated pins. A consistent orientation and pin-1 marking also reduces assembly and rework errors.
Do not assume that two CY8C3445 ordering codes are interchangeable merely because both use a 48-pin SSOP package. The final suffix may encode temperature, qualification, or other ordering information. Compare the CY8C3445PVI-088 and CY8C3445PVI-094 ordering rows, including electrical limits and lifecycle status. Also verify that the firmware clock configuration, peripheral assignments, pin muxing, and memory usage remain valid after any substitution.
Separate noisy digital and communication paths from analog sensor inputs, particularly when the 8051 core switches at up to 50 MHz. Use a continuous ground reference, keep return currents short, and avoid sharing narrow neck routes between analog and digital nets. Add filtering at connector boundaries and use the datasheet's analog configuration guidance for the selected PSoC blocks. Validate the final board with signal-integrity measurements because the package has closely spaced leads and external routing can dominate accuracy.
معلومات الامتثال
The manufacturer ordering and environmental documents must be used to confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code.