Infineon

CY8C3445PVI-088 - 50MHz 32KB Flash MCU | Infineon

MPN: CY8C3445PVI-088 ✗ پایان تولید
1.71 V to 5.5 V Vdss 48-pin SSOP Package 50 MHz Speed 32 KB Memory
حداقل سفارش: 1 |

CY8C3445PVI-088 نمای کلی

Infineon Technologies CY8C3445PVI-088 is an 8-bit Flash-programmable PSoC 3 microcontroller with a 50 MHz 8051 core, 32 KB of Flash memory, and a 1.71 V to 5.5 V operating-voltage range. The device is packaged in a 48-pin SSOP package. It combines programmable digital and analog resources with an embedded system-on-chip architecture in a single integrated circuit.

A programmable system-on-chip, or PSoC, integrates a microcontroller core with configurable peripheral blocks on one semiconductor device. The PSoC 3 family uses an 8-bit 8051-compatible core and provides programmable resources that can support control, communication, analog measurement, and mixed-signal product designs. This system-level integration can reduce external component requirements while allowing peripheral behavior to be adapted in firmware.

Key device attributes include a 50 MHz operating frequency, 32 KB of Flash program memory, and a 1.71 V to 5.5 V supply range. Flash memory supports in-system reprogramming, allowing firmware updates without removing the microcontroller from its finished assembly. The 48-pin SSOP package provides a surface-mount format suitable for compact control boards, industrial modules, and embedded products requiring more I/O than a small-lead-count package can offer.

The CY8C3445 belongs to the CY8C34 family of ultra-low-power Flash-programmable PSoC 3 devices. Its configurable blocks can be assigned to digital functions, analog functions, timers, serial communication, and other mixed-signal tasks. This architecture allows a product designer to implement application-specific control logic around one microcontroller rather than relying on a fixed collection of peripheral functions.

Typical uses include industrial control panels, building automation, sensor-conditioning systems, compact power-management controllers, communication equipment, and low-power embedded products. The 1.71 V minimum operating voltage supports systems with low-voltage rails, while the 5.5 V maximum operating voltage accommodates conventional 5 V industrial and consumer equipment. Firmware configuration must be checked against the system supply and clock requirements.

PCB design should preserve the power, ground, decoupling, programming, and exposed signal paths defined by the manufacturer pin description. Place local supply bypass capacitors close to the device, route sensitive analog signals away from high-current switching paths, and include programming access in the board test fixture. Confirm the exact peripheral assignments, clock limits, startup behavior, and pin multiplexing in the CY8C34 family datasheet before releasing firmware.

This product page combines the device's confirmed memory, frequency, voltage, core, and package characteristics with application guidance, comparison information, and engineering-focused design notes. These details support faster component selection while keeping design decisions tied to the manufacturer documentation.

جایگزین‌های drop-in برای CY8C3445PVI-088 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای CY8C3445PVI-088 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Mounting Type, SRAM, Device Type, Processor Core.

Cypress Semiconductor
Package: 48-BSSOP
SRAM: 4KB
Device Type: 8-bit programmable system-on-chip microcontroller
مقایسه با CY8C3445PVI-088 →
Infineon
Package: 48-SSOP
Mounting Type: Through-hole leaded SMD package
Device Type: 8-bit PSoC 3 microcontroller
مقایسه با CY8C3445PVI-088 →

CY8C3445PVI-094

✅ جایگزین مستقیم
Infineon
📦 48-pin SSOP
8-bit PSoC 3 microcontroller · 8051 · 50 MHz · 32 kByte Flash · 32K x 8 bits · 4 kByte · 1 kByte · 1.71 V to 5.5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

CY8C3445PVI-088 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Flash-programmable system-on-chip microcontroller
Device Family CY8C34 / PSoC 3
Processor Core 8-bit 8051
حداکثر فرکانس کلاک 50 MHz
Flash Memory 32 KB
SRAM 4 kByte
Operating Voltage Range 1.71 V to 5.5 V
بسته‌بندی 48-pin SSOP
نوع نصب Surface mount
Program Memory Type Flash
Architecture Configurable PSoC 3 architecture

راهنمای پیکربندی پین CY8C3445PVI-088 48-pin ssop

پیکربندی پین برای CY8C3445PVI-088 (پکیج 48-pin ssop). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 48-pin ssop برای CY8C3445PVI-088

داده پین‌آوت تفصیلی موجود نیست برای CY8C3445PVI-088.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

CY8C3445PVI-088 مناسب است برای 6 کاربردs: Industrial Control Panel, Building Automation Node, Sensor Conditioning and Acquisition, Low-Power Embedded Controller, Communication Equipment Interface, Compact Power-Supply Sequencer.

🏭

Industrial Control Panel

The CY8C3445PVI-088 fits compact industrial control panels that combine user inputs, indicators, sensors, and communications in one controller. Its 50 MHz 8051 core provides deterministic execution for state machines, debouncing, interlocks, and supervisory logic, while 32 KB of Flash holds application firmware and 4 kByte of SRAM supports working data. The configurable PSoC 3 resources can consolidate digital I/O, timer, and communication functions. The 1.71 V to 5.5 V range accommodates low-voltage logic and conventional 5 V control electronics. Designers should still match the exact ordering option to the enclosure temperature, isolate external field wiring, and use the manufacturer pin table to assign multiplexed functions.

🧩

Building Automation Node

The CY8C3445PVI-088 is appropriate for distributed building-automation nodes that monitor inputs and control lighting, HVAC, or access equipment. Its low-voltage operating range of 1.71 V to 5.5 V supports power-efficient sensor interfaces, while the 8-bit 8051 core manages protocol handling and local decisions. The 32 KB Flash stores application code and configuration, and 4 kByte of SRAM accommodates message and state buffers. PSoC 3 configurable blocks can reduce the need for separate peripheral devices when firmware assigns timer, serial, and signal functions correctly. For reliable operation, follow the manufacturer startup requirements, protect long cable-connected inputs, and validate timing margins under worst-case bus traffic.

🧩

Sensor Conditioning and Acquisition

The CY8C3445PVI-088 can serve as the control and acquisition processor in a compact mixed-signal sensor module. The PSoC 3 architecture places configurable analog and digital resources beside a 50 MHz 8051 core, allowing firmware to configure measurement behavior and process acquired data. Its 32 KB of Flash is suitable for calibration tables, filtering algorithms, and field-updateable logic, while 4 kByte of SRAM supports sample buffers and working state. The 1.71 V to 5.5 V range permits operation from low-energy sensor rails. Achieved measurement performance will depend on the selected analog block, reference source, input filtering, and grounding. Follow the family datasheet for the exact converter resolution and pin assignments rather than assuming another CY8C34 member's configuration.

⚡

Low-Power Embedded Controller

The CY8C3445PVI-088 suits compact embedded controllers that need local processing without a high-power application processor. Its 8-bit architecture can execute acquisition, actuator, and communications tasks efficiently, while the 32 KB Flash provides room for embedded firmware and 4 kByte of SRAM supports active state. A 1.71 V minimum operating voltage is useful for battery-derived and energy-harvesting subsystems that regulate a low-voltage rail. The device also offers a familiar 8051 software base and configurable PSoC peripherals. Product developers should minimize active processing time, disable unused resources, and confirm the manufacturer power-management modes and wake sources for the exact ordering option. Supply decoupling must be designed for the expected current transitions rather than the nominal operating voltage alone.

🌐

Communication Equipment Interface

The CY8C3445PVI-088 can implement a dedicated interface controller for communication equipment requiring local protocol management and configurable signal functions. Its 50 MHz 8051 core supports frame handling, status reporting, configuration storage, and supervisory logic, while the PSoC 3 configurable blocks can support timer-based transfers and serial functions. With 32 KB of Flash and 4 kByte of SRAM, the device is practical for gateways, protocol converters, and equipment-control modules that do not require a high-end Cortex-class processor. The 1.71 V to 5.5 V supply range also eases integration with mixed-voltage logic. Designers should assign peripheral pins according to the manufacturer table, provide proper level translation for external interfaces, and verify protocol timing under maximum data rates.

⚡

Compact Power-Supply Sequencer

The CY8C3445PVI-088 can control a compact multi-rail power system by monitoring enable signals, sequencing supplies, and coordinating fault reporting. The 50 MHz 8051 core is fast enough for deterministic supervisory tasks, and the 32 KB Flash can store configuration tables and a state machine. The 1.71 V to 5.5 V range allows operation from the auxiliary rail used by many controller boards, while configurable timers and digital blocks simplify implementation. The device should supervise rather than carry primary switching current; use suitable power devices for the power stage. Keep high-di/dt switching loops physically separate from the controller ground path, and verify every rail's startup voltage and delay against the timing requirements of the downstream loads.

What is the CY8C3445PVI-088?
The CY8C3445PVI-088 is an Infineon Technologies 8-bit Flash-programmable PSoC 3 system-on-chip microcontroller with a 50 MHz 8051 core, 32 KB of Flash memory, and a 48-pin SSOP package. According to the manufacturer datasheet, the device operates from 1.71 V to 5.5 V and provides configurable digital and analog resources for embedded mixed-signal designs.
What are the key specifications of CY8C3445PVI-088?
The CY8C3445PVI-088 combines a 50 MHz 8-bit 8051 core with 32 KB of Flash memory, 4 kByte of SRAM, and a 1.71 V to 5.5 V operating range. The manufacturer datasheet identifies a 48-pin SSOP package and a configurable PSoC 3 architecture. These figures position the device for compact embedded control, analog measurement, and communications applications.
What is the operating voltage of CY8C3445PVI-088?
The CY8C3445PVI-088 operates from 1.71 V to 5.5 V, according to the manufacturer datasheet. The range supports low-voltage embedded systems as well as conventional 5 V equipment. Firmware, clock, and peripheral settings must remain compatible with the selected supply voltage, and board-level power design should include local bypass capacitance at the device.
How much Flash memory does CY8C3445PVI-088 have?
The CY8C3445PVI-088 contains 32 KB of Flash program memory, equivalent to 32K by 8 bits. According to the manufacturer datasheet, this memory stores firmware in a reprogrammable format suitable for embedded product development and field updates. Actual application code space can be reduced by bootloader, configuration data, and required programming services.
Where can I download the CY8C3445PVI-088 datasheet PDF?
The CY8C3445PVI-088 datasheet PDF is available through the CY8C34 family documentation and the product-document links on this page. The manufacturer document defines the pin assignments, electrical characteristics, memory map, clock requirements, and programmable peripheral blocks. Use the family datasheet together with the device-specific ordering information when confirming every parameter for the exact ordering code.
Where can I find the CY8C3445PVI-088 pinout?
Use the pin-description table in the CY8C34 family manufacturer datasheet to locate the CY8C3445PVI-088 pinout and pin multiplexing. The exact package is a 48-pin SSOP, but an image without the manufacturer's function names is not sufficient for PCB routing. Confirm power pins, ground pins, programming signals, clock inputs, and multiplexed peripheral functions before laying out the board.
Can CY8C3445PVI-088 be used for industrial control systems?
The CY8C3445PVI-088 is suitable for many embedded industrial-control designs that use a 1.71 V to 5.5 V supply and require an 8-bit real-time controller with configurable resources. Its 50 MHz 8051 core and 32 KB of Flash support control tasks, while the PSoC architecture can implement digital, analog, timer, and communication functions. Qualification for a particular industrial environment must be confirmed separately.
What can replace the CY8C3445PVI-088?
The closest confirmed same-family replacement is the Infineon CY8C3445PVI-094, which uses the same 48-pin SSOP footprint and is identified by the manufacturer as a PSoC 3 device with a 50 MHz 8051 core, 32 kByte Flash, and 4 kByte SRAM. Before substitution, compare the ordering-option temperature range, clocking details, peripheral configuration, and lifecycle status in the manufacturer documentation.
Is CY8C3445PVI-088 the same as CY8C3445PVI-094?
The CY8C3445PVI-088 and CY8C3445PVI-094 share the same 48-pin SSOP package and the same published headline configuration of a 50 MHz 8051 core with 32 kByte Flash and 4 kByte SRAM. They are not automatically interchangeable, however, because the final ordering suffix can identify different qualification or temperature options. Check the ordering table and device-status records before replacing one with the other.
When should I choose CY8C3445PVI-088 instead of CY8C3445PVI-094?
Choose CY8C3445PVI-088 when its ordering option matches the required environmental and qualification conditions; choose CY8C3445PVI-094 when that suffix better satisfies the target product specification. Both devices use the same 48-pin SSOP footprint and the same confirmed 50 MHz, 32 kByte Flash, and 4 kByte SRAM configuration. The deciding factor should be the manufacturer-defined ordering option rather than the core frequency alone.
Is CY8C3445PVI-088 suitable for sensor and mixed-signal products?
The CY8C3445PVI-088 is suitable for sensor and mixed-signal products because the PSoC 3 architecture combines an 8-bit controller with configurable peripheral blocks. According to the manufacturer datasheet, the device includes 32 KB of Flash, 4 kByte of SRAM, and a 1.71 V to 5.5 V operating range. Sensor accuracy still depends on the selected analog resources, reference design, component tolerances, and PCB layout.
What design considerations apply to the CY8C3445PVI-088 power supply?
Design the CY8C3445PVI-088 power rail within its specified 1.71 V to 5.5 V range and follow the manufacturer datasheet for decoupling and pin connections. Place bypass capacitors close to the supply and ground pins, provide a low-impedance return path, and keep noisy switching or digital return currents away from analog inputs. Confirm the exact pin names and required capacitor values in the pin-description table.
How should CY8C3445PVI-088 programming be handled?
The CY8C3445PVI-088 stores firmware in 32 KB of Flash and supports a Flash-programmable architecture. Production programming should follow the manufacturer's programming and test procedure, including the specified clock, supply, reset, and programming-signal sequence. Preserve programming access through a test fixture or connector when field updates are required, and verify erase, programming, and readback operations before shipment.
Where can I buy CY8C3445PVI-088 and what is the price?
Use the Request a Quote form on this page to request current CY8C3445PVI-088 availability, commercial terms, and lead time. The request should include the exact MPN, CY8C3445PVI-088, and the required quantity and packaging format. Current price and stock can change with market conditions, so a quotation is more reliable than a static online price reference.
What is the lead time and stock status for CY8C3445PVI-088?
Submit CY8C3445PVI-088 through the Request a Quote form on this page to obtain current stock, minimum-order quantity, lead time, and shipment terms. The device is listed by Infineon Technologies as an 8-bit, 32 KB Flash, 50 MHz 8051 microcontroller in a 48-pin SSOP package. Those identifying details should be included in the request to prevent confusion with other PSoC family members.
What is the best cross-brand equivalent for CY8C3445PVI-088?
No cross-brand drop-in equivalent for the CY8C3445PVI-088 is confirmed by the available manufacturer and cross-reference information. Its 8051 core and configurable PSoC peripheral resources are more specialized than those of a generic 8-bit MCU, so an equal package and clock rating alone do not establish pin-to-pin compatibility. Use CY8C3445PVI-094 as the same-family candidate and obtain written compatibility confirmation before any substitution.
Is the CY8C3445PVI-088 currently active?
The current lifecycle status of the CY8C3445PVI-088 should be confirmed through the manufacturer product and ordering records before a production commitment. The device remains identifiable as an Infineon Technologies PSoC 3 MCU with a 50 MHz 8051 core, 32 KB of Flash, and a 48-pin SSOP package. Request current lifecycle, stock, and lead-time confirmation through the Request a Quote form on this page.

داده‌های مرجع مهندسی برای CY8C3445PVI-088 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose CY8C3445PVI-088 when its ordering option satisfies the environmental, qualification, and lifecycle requirements of the finished product and you need a confirmed 48-pin SSOP PSoC 3 controller with a 50 MHz 8051 core, 32 KB Flash, and 4 kByte SRAM. CY8C3445PVI-094 is the closest confirmed drop-in candidate because it has the same package and confirmed headline configuration; review the manufacturer ordering table before using it as a substitute. No cross-brand alternative is established because the PSoC 3 architecture, programmable peripherals, and 8051 software environment are not made interchangeable merely by matching the package. If a generic 8-bit MCU is acceptable, ATMEGA8L-8MUR or ATTINY44A-MUR may simplify procurement, but they are redesign choices rather than pin-compatible replacements.

مقایسه با جایگزین‌ها

پارامتر این محصول CY8C3445PVI-094
Brand Infineon Technologies Infineon Technologies
Package 48-pin SSOP 48-SSOP
Product Type 8-bit PSoC 3 microcontroller PSoC 3 MCU
Processor Core 8051, 8-bit 8051, 8-bit
Maximum Clock Frequency 50 MHz 50 MHz
Flash Memory 32 KB 32 kByte
SRAM 4 kByte 4 kByte
Program Memory Flash Flash
Architecture Configurable PSoC 3 PSoC 3

تفاوت‌های کلیدی

  • Same-package same-family substitution path (در مقابلCY8C3445PVI-094)
  • Configurable PSoC 3 mixed-signal architecture (در مقابلCY8C3445PVI-094)
  • Wide embedded supply compatibility (در مقابلCY8C3445PVI-094)

یادداشت‌های طراحی

Design the CY8C3445PVI-088 supply within the manufacturer-defined 1.71 V to 5.5 V range. Place the required bypass capacitors close to the associated supply and ground pins, using the smallest practical loop between each capacitor and the device. Route supply and return paths away from sensitive analog inputs, and use a ground plane that remains continuous beneath the SSOP footprint. Confirm startup voltage, reset release, and peripheral clock requirements against the family datasheet before defining the power tree.

Treat the 48-pin SSOP footprint as a dense mixed-signal routing problem. Assign board functions to pins from the manufacturer pin-description table before finalizing the schematic, because PSoC peripherals can map to different pins through configuration. Keep programming, reset, and clock nets short, avoid routing fast digital outputs beneath analog inputs, and place external timing and storage components close to their associated pins. A consistent orientation and pin-1 marking also reduces assembly and rework errors.

Do not assume that two CY8C3445 ordering codes are interchangeable merely because both use a 48-pin SSOP package. The final suffix may encode temperature, qualification, or other ordering information. Compare the CY8C3445PVI-088 and CY8C3445PVI-094 ordering rows, including electrical limits and lifecycle status. Also verify that the firmware clock configuration, peripheral assignments, pin muxing, and memory usage remain valid after any substitution.

Separate noisy digital and communication paths from analog sensor inputs, particularly when the 8051 core switches at up to 50 MHz. Use a continuous ground reference, keep return currents short, and avoid sharing narrow neck routes between analog and digital nets. Add filtering at connector boundaries and use the datasheet's analog configuration guidance for the selected PSoC blocks. Validate the final board with signal-integrity measurements because the package has closely spaced leads and external routing can dominate accuracy.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer ordering and environmental documents must be used to confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

CY8C3445PVI-088 datasheet CY8C3445PVI-088 datasheet pdf CY8C3445PVI-088 pinout CY8C3445PVI-088 schematic CY8C3445PVI-088 equivalent CY8C3445PVI-088 replacement CY8C3445PVI-088 cross reference CY8C3445PVI-088 footprint CY8C3445PVI-088 price CY8C3445PVI-088 stock Infineon CY8C3445PVI-088 CY8C3445PVI-088 vs CY8C3445PVI-094 CY8C3445 48 SSOP pinout CY8C3445PVI-088 application circuit

قطعات و اصطلاحات مرتبط

Infineon Technologies CY8C3445PVI-088 CY8C3445PVI-094 PSoC 3 CY8C34 family 8051 core 8-bit microcontroller Flash-programmable system-on-chip microcontroller semiconductor Flash memory SRAM programmable peripheral blocks mixed-signal design 48-pin SSOP SSOP family surface-mount package SMD package 1.71 V to 5.5 V operating range 50 MHz clock industrial control building automation sensor conditioning RS-232 Ethernet
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ