CY8C3446AXA-105 - 50MHz 64KB PSoC 3 MCU | Infineon
MPN: CY8C3446AXA-105 ✓ نشطCY8C3446AXA-105 نظرة عامة
A programmable system-on-chip, or PSoC, combines a microcontroller core, programmable digital and analog resources, memory, and configurable I/O in one integrated device. The CY8C34xx belongs to the PSoC 3 family, where the CPU and embedded flash provide the fundamental control platform while configurable blocks support application-specific signal conditioning, control, and interface functions.
The CY8C3446AXA-105 combines a 50 MHz 8051 CPU with 64 KB of flash organized as 64K by 8 bits. Its 100-TQFP package provides 100 external connection positions for digital and analog functions, while the 1.71 V to 5.5 V supply range allows operation across low-voltage embedded systems. The related CY8C3446 family is also described by Infineon as containing 24 digital blocks, demonstrating the programmable architecture available within the family.
The main technical benefit of this device is integration. Instead of using separate logic devices for control, input conditioning, and programmable peripheral functions, a designer can configure many resources in firmware. This can reduce board area and component count, although final resource assignments and performance must be checked against the manufacturer datasheet for the exact configuration being used.
Typical applications include industrial control modules, programmable sensor interfaces, compact automation equipment, embedded measurement systems, and consumer or industrial products requiring a broad set of programmable I/O. The 50 MHz CPU provides a higher operating rate than the 24 MHz member referenced for the same family, while 64 KB of embedded flash supports firmware, configuration data, and application logic.
PCB design should preserve the manufacturer's recommended power, decoupling, and pin-assignment requirements. Because the device has 100 package pins and combines multiple programmable functions, engineers should verify the pin configuration in the manufacturer datasheet, route sensitive analog or timing-sensitive signals away from fast digital outputs, and place bypass capacitors close to the appropriate supply pins.
This page consolidates the verified product identity, electrical headline specifications, lifecycle information, drop-in alternatives, comparison data, and practical implementation guidance. It is intended to accelerate component evaluation while keeping the final design decisions tied to the official Infineon documentation.
بدائل مباشرة لـ CY8C3446AXA-105 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع CY8C3446AXA-105 (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type.
CY8C3446AXI-105
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←CY8C3446AXA-105 الحدود القصوى والخصائص الكهربائية
| Product Type | Programmable System-on-Chip (PSoC) microcontroller |
| Product Series | PSoC 3 CY8C34xx |
| CPU Architecture | 8-bit 8051 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory Size | 64 KB |
| Flash Memory Organization | 64K x 8 bits |
| Programmable Digital Blocks | 24 blocks |
| Operating Voltage Range | 1.71 V to 5.5 V |
| العلبة | 100-pin TQFP |
| Package Dimensions | 14 mm x 14 mm |
| نوع التركيب | Surface mount |
| عدد الدبابيس | 100 pins |
دليل تكوين أطراف CY8C3446AXA-105 14 mm x 14 mm
تكوين الأطراف لـ CY8C3446AXA-105 (حزمة 14 mm x 14 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ CY8C3446AXA-105.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
CY8C3446AXA-105 مناسب لـ 6 التطبيقs: Industrial Automation Control, Programmable Sensor Interface, Programmable Logic Controller, Embedded Measurement System, Compact Consumer Controller, Automated Test Equipment.
Industrial Automation Control
The CY8C3446AXA-105 fits compact industrial automation modules because its 50 MHz 8051 CPU can execute control logic while 24 programmable digital blocks provide configurable I/O behavior. The 64 KB flash stores application firmware and configuration parameters, and the 1.71 V to 5.5 V operating range supports low-voltage embedded rails. Designers can place sensing, conditioning, and control functions into one device instead of using several fixed-function logic components. The 100-pin TQFP also exposes substantially more signals than a small microcontroller package, allowing distributed inputs and outputs to be consolidated. Before layout release, verify the exact temperature grade, peripheral assignments, and pin requirements against the Infineon documentation.
موصى به
Programmable Sensor Interface
The CY8C3446AXA-105 is useful in programmable sensor-interface products that need configurable digital functions alongside a general-purpose controller. Its 50 MHz 8051 core can supervise acquisition sequences and apply filtering or threshold logic, while the family's 24 digital blocks can implement timing and interface functions where configuration permits. The 64 KB flash provides space for firmware, lookup tables, and calibration information. Operating from 1.71 V to 5.5 V also allows the controller to operate near compatible low-voltage sensor rails. Confirm the required ADC resources, comparator functions, external interfaces, and temperature limits before assigning pins, because those characteristics are not established by the headline product listings.
موصى به
Programmable Logic Controller
The CY8C3446AXA-105 can serve as the core of a compact programmable logic controller because it combines an 8051 processor with 24 programmable digital blocks and 64 KB of embedded flash. The 50 MHz operating rate supports responsive sequencing, while the large 100-pin package provides access to numerous external signals for inputs, outputs, communications, and interlocks. This integration can reduce discrete logic count and simplify firmware-driven behavior changes. A practical design should reserve pins for programming, clocking, reset, and communications rather than assigning every available signal to production logic. Validate timing, drive strength, and interrupt resources for each PSoC configuration against the official datasheet.
موصى به
Embedded Measurement System
The CY8C3446AXA-105 is appropriate for embedded measurement systems that combine control, data conditioning, and programmable digital functions. Its 50 MHz 8051 CPU can coordinate measurements, perform fixed-point processing, and manage calibration information, while 64 KB flash supports firmware and configuration data. The 1.71 V to 5.5 V supply range allows the MCU to operate from compatible low-voltage systems without requiring a separate high-voltage rail. The 100-pin TQFP offers more external connectivity than compact packages, which helps when multiple sensor inputs and status outputs are required. Verify ADC accuracy, reference voltage, sampling architecture, and analog pin assignments in the manufacturer datasheet before finalizing the measurement front end.
موصى به
Compact Consumer Controller
The CY8C3446AXA-105 can support compact consumer controllers that require flexible I/O and moderate real-time processing without a large external logic tree. Its 50 MHz 8051 CPU and 64 KB flash are suitable for managing user inputs, indicators, actuators, and product-specific behavior. The 1.71 V to 5.5 V range can simplify power architecture when the surrounding product already operates at a compatible rail. Because the device is offered in a 100-pin TQFP, it is better suited to products with substantial external connectivity than to minimalist wearables. Confirm package temperature ratings, flash retention, programming method, and lifecycle commitments for the intended production volume before schematic approval.
موصى به
Automated Test Equipment
The CY8C3446AXA-105 is suitable for automated test equipment controllers that coordinate stimuli, measurements, sequencing, and communications. The 50 MHz 8051 core handles real-time control, while 24 programmable digital blocks can implement deterministic timing and signal-routing functions where the selected configuration supports them. Its 64 KB flash stores test sequences, calibration constants, and firmware, and the 100-pin package provides enough external connectivity for control and instrumentation interfaces. The 1.71 V to 5.5 V range supports embedded low-voltage subsystems, although separate analog and high-voltage stages remain necessary. Validate timer accuracy, I/O characteristics, communications peripherals, and thermal requirements before using it as a precision timing controller.
موصى به
بيانات مرجعية هندسية لـ CY8C3446AXA-105 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | CY8C3446AXI-105 |
|---|---|---|
| Package | 100-pin TQFP, 14 mm x 14 mm | 100-pin TQFP, 14 mm x 14 mm |
| Brand | Infineon Technologies | Infineon Technologies |
| CPU Architecture | 8-bit 8051 | 8-bit 8051 |
| Maximum CPU Frequency | 50 MHz | 50 MHz |
| Flash Memory | 64 KB, 64K x 8 bits | 64 KB |
| Operating Voltage Range | 1.71 V to 5.5 V | 1.71 V to 5.5 V |
| Programmable Digital Blocks | 24 blocks | 24 blocks |
| Ordering-Grade Suffix | AXA | AXI |
أبرز الفروقات
- Higher listed CPU frequency than the lower-speed CY8C3446AXA-098 family member (مقابلCY8C3446AXA-098)
- Pin-compatible family option retains the principal electrical ratings (مقابلCY8C3446AXI-105)
- High pin count supports consolidated embedded control (مقابلCY8C3444AXA-106)
ملاحظات التصميم
Route the 100-pin TQFP footprint directly from the official Infineon package drawing and land pattern. Keep programming, reset, clock, and communication pins accessible for production programming, and preserve the package orientation mark in the PCB artwork. A 100-lead footprint has fine-pitch routing and assembly sensitivity, so validate courtyard clearance, solder mask, and paste deposits with the fabricator before release.
Place the required bypass capacitors at the corresponding power pins and minimize the supply-loop impedance. The supported operating range is 1.71 V to 5.5 V, so do not allow rail tolerance, transient droop, or cross-coupled noise to push the device outside that range. Use the manufacturer's recommended capacitor values and decoupling topology rather than selecting arbitrary high-capacitance parts that may increase inrush or supply-transient behavior.
Separate sensitive analog, timing, and communication routes from fast switching outputs where the application allows it. PSoC digital blocks can be configured by firmware, so a pin that is quiet in one firmware configuration may become a high-speed output in another. Establish signal-integrity constraints from the actual pin configuration and external board requirements, and include ground-return paths that minimize loop area.
Do not treat AXA and AXI ordering-code variants as unconditional replacements without checking temperature grade, qualification, and errata requirements. The CY8C3446AXI-105 retains the visible 50 MHz, 64 KB, 100-pin TQFP, and 1.71 V to 5.5 V headline ratings of the target, but the grade suffix can determine environmental suitability. Record the exact approved MPN in the BOM and schematic notes.
معلومات الامتثال
The visible manufacturer and distributor product information does not establish the requested compliance attributes for the exact CY8C3446AXA-105 configuration.